Have tried some of the online references as wells as unix time form at etc. but none of these seem to work. See the examples below.
running Mysql 5.5.5 in ubuntu. innodb engine.
nothing is custom. This is using a built in datetime function.
Here are some examples with the 6 byte hex string and the decoded message below. We are looking for the decoding algorithm. i.e.how to turn the 6 byte hex string into the correct date/time. The algorithm must work correctly on the examples below. The right most byte seems to indicate difference in seconds correctly for small small differences in time between records. i.e. we show an example with 14 sec difference.
full records,nicely highlighted and formated word doc here.
https://www.dropbox.com/s/zsqy9o2rw1h0e09/mysql%20datetime%20examples%20.docx?dl=0
link to formatted word document with the examples.
contact frank%simrex.com re. reward.
replace % with #
hex strings and decoded date/time pairs are below.
pulled from healthy file running mysql
12 51 72 78 B9 46 ... 2014-10-22 16:53:18
12 51 72 78 B9 54 ... 2014-10-22 16:53:32
12 51 72 78 BA 13 ... 2014-10-22 16:55:23
12 51 72 78 CC 27 ... 2014-10-22 17:01:51
here you go.
select str_to_date(conv(replace('12 51 72 78 CC 27',' ', ''), 16, 10), '%Y%m%d%H%i%s')
I have a video with an unknown frame rate. I need to calculate the frame rate it was encoded for. I am trying to calculate it using the data in SPS but I cannot decode it.
The bitstream for the NAL is :
67 64 00 1e ac d9 40 a0 2f f9 61 00 00 03 00 7d 00 00 17 6a 0f 16 2d 96
From an online guide (http://www.cardinalpeak.com/blog/the-h-264-sequence-parameter-set/), I could figure out its profile and level fields, but to figure out everything after the "seq_parameter_set_id" field in the table, I need to know the ue(v). Here is where I get confused. According to this page the "ue(v)" should be called with the value v=32? (why?) What exactly should I feed into the exponential-golomb function? Do I read 32 digits from the beginning of the bitstream, or from after the previously read bytes, to regard it as the "seq_parameter_set_id"?
( My ultimate goal is to decode the VUI parameters so that I can recalculate the framerate.)
Thanks!
ue = Unsigned Exponential golomb coding.
(v) = variable number of bits.
http://en.wikipedia.org/wiki/Exponential-Golomb_coding
I'm just starting out with Node streams.
My library's demo code uses:
stream.pipe(process.stdout, {end: true});
Which works fine, printing chunks of JSON to standard output.
I'd like to use:
stream.on('data', function(chunk) {
console.log(chunk)
}
But I get a binary buffer instead:
chunk! <Buffer 7b 22 73 74 72 65 61 6d 22 3a 22 20 2d 2d 2d 5c 75 30 30 33 65 20 35 35 32 38 38 36 39 62 30 30 33 37 5c 6e 22 7d>
Is there a way I can use on('data') and see the JSON?
I believe you should run stream.setEncoding('utf8') on your stream, so node.js core will decode utf8 automatically.
You should probably not use chunk.toString('utf8') like suggested earlier because it can garble unicode characters on the boundaries, unless you're sure that the data will be in one block.
Use chunck.toString ('utf8'). Also, the Buffer class has other encodings too!
I need to extract this specific JSON-field into a parameter for my performance test in Visual Studio:
"ExamAnswerId": "757a3735-e626-412b-934c-e577c6963d51"
the problem occurs when I try to do this manually by right clicking the response and click "add extraction rule". The text is split up into 3 different rows with lots of unreadable numbers next to it like this:
"0x00000000 7B 22 45 78 61 6D 41 6E 73 77 65 72 49 64 22 3A {"ExamAnswerId":
0x00000010 22 37 35 37 61 33 37 33 35 2D 65 36 32 36 2D 34 "757a3735-e626-4
This will sound dumb, but I somehow need to extract 3 different parameters, only because I can't copy/paste it -- and this is also where I think I fail.
the ExamAnswerId is important for me to fullfill another webrequest later on, but I can't seem to pass it on properly.
all input greatly appreciated !
Did you see this response that got posted? http://social.msdn.microsoft.com/Forums/en-US/vstest/thread/b26114a2-7a24-45eb-b5d1-01e9165045b0/
Just use the Extract Test like they suggest and you should work fine. Your Starts With could be "ExamAnswerId": " and your Ends With could be ". HTH.
I had a similar problem with the Extraction rule. Had to escape the quotes to get the condition to work. Like this:
Starts With: \"ExamAnswerId\":\"
Ends With: \"
Do following steps :
Add all available ExamAnswerId in a CSV file .
Now add CSV as Data source.
Lets suppose CSV file name is testdata and tableName=testData#csv and columnName=ExamAnswerId.
Please note when you will add data source you will see table name.
Replace this:
["ExamAnswerId": "757a3735-e626-412b-934c-e577c6963d51"]
by this:
["ExamAnswerId": "{{testdata.testdata#csv.ExamAnswerId}}"]
I managed session in JSON. The following link worked for me:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/b26114a2-7a24-45eb-b5d1-01e9165045b0/cant-fetch-json-value-and-extract-to-parameter?forum=vstest
Example:
0x00000000 7B 22 53 65 73 73 69 6F 6E 22 3A 22 63 66 39 37 {"Session":"cf97
0x00000010 64 33 65 61 2D 36 39 38 33 2D 34 31 37 30 2D 38
I created "Extrat_Text" with variable MySessionID
Left Boundary "Session":
Right Boundary ",
Then I passed {{MySessionID}} in subsequent request in place of Session.
Or we can use regex (Positive look ahead and Positive look behind)
For example I want to get access_token property in a JSON result looks like this
{"token_type":"Bearer","expires_in":"3600","ext_expires_in":"0","expires_on":"1474420129","not_before":"1474416229","resource":"5fe3f443","access_token":"eyJ0eXAiOiJKV1QiLCJhbGci"}
I can use this regex:
(?<=\"access_token\"\:\").*(?=\")
I am picking up pieces of someone else's large project and trying to right the wrongs. The problem is, I'm just not sure what the correct ways are.
So, I am cURLing a bunch of HTML pages, then writing it to files with simple commands like:
$src = `curl http://google.com`;
open FILE, ">output.html";
print FILE $src;
close FILE;
Now I wanted those to be saved as UTF-8. What is it saved as? Then I am reading the html file in using the same basic 'open' command, parsing the html with regex calls, and using string concatenation to make a big string and writing it to an XML file (using the same code as above). I have already started using XML::Writer instead, but now I must go through and fix the files that have inaccurate encoding.
So, I don't have the html anymore, but I still have the XML that have to display proper characters. Here is an example: http://filevo.com/wkkixmebxlmh.html
The main problem is detecting and replacing the character in question with a "\x{2019}" that displays in editors properly. But I can't figure out a regex to actually capture the character in the wild.
UPDATE:
I still cannot detect the ALT-0146 character that's in the XML file I uploaded to Filevo above. I've tried opening it in UTF-8, and searching for /\x{2019}/, /chr(0x2019)/, and just /’/, nothing.
Discovering the encoding of a HTML document is hard. See http://blog.whatwg.org/the-road-to-html-5-character-encoding and especially that it requires a "7-step algorithm; step 4 has 2 sub-steps, the first of which has 7 branches, one of which has 8 sub-steps, one of which actually links to a separate algorithm that itself has 7 steps... It goes on like that for a while."
This is what I used for a my limited needs in parsing HTML files.
my $CHARACTER_SET_CLASS = '\w:.()-';
# X(HT)?ML: http://www.w3.org/International/O-charset
/\<\?xml [^>]*(?<= )encoding=[\'\"]?([$CHARACTER_SET_CLASS]+)/ ||
# X?HTML: http://blog.whatwg.org/the-road-to-html-5-character-encoding
/\<meta [^>]*\bcharset=["']?([$CHARACTER_SET_CLASS]+)/i ||
# CSS: http://www.w3.org/International/questions/qa-css-charset
/\#charset "([^\"]*)"/ ||
To make sure you are producing output in UTF-8, apply the utf8 layer to the output stream using binmode
open FILE, '>output.html';
binmode FILE, ':utf8';
or in the 3-argument open call
open FILE, '>:utf8', 'output.html'
Arbitrary input is trickier. If you are lucky, HTML input will tell you its encoding early on:
wget http://www.google.com/ -O foo ; head -1 foo
<!doctype html><html><head><meta http-equiv="content-type" content="text/html;
charset=ISO-8859-1"><title>Google</title><script>window.google=
{kEI:"xgngTYnYIoPbgQevid3cCg",kEXPI:"23933,28505,29134,29229,29658,
29695,29795,29822,29892,30111,30174,30215,30275,30562",kCSI:
{e:"23933,28505,29134,29229,29658,29695,29795,29822,29892,30111,
30174,30215,30275,30562",ei:"xgngTYnYIoPbgQevid3cCg",expi:
"23933,28505,29134,29229,29658,29695,29795,29822,29892,30111,
30174,30215,30275,30562"},authuser:0,ml:function(){},kHL:"en",
time:function(){return(new Date).getTime()},
Ah, there it is: <meta http-equiv="content-type" content="text/html;
charset=ISO-8859-1">. Now you may continue to read input as raw bytes and find some way to decode those bytes with the known encoding. CPAN can help with this.
I am referring to the updated part of your question (next time open a new one for a separate topic). This is a hex dump of your file (please refrain in the future from making helpers jump through burning hoops to get at your example data):
0000 3c 78 6d 6c 3e 0d 0a 3c 70 65 72 73 6f 6e 4e 61 <xml>␍< personNa
0010 6d 65 3e 47 2e 20 50 65 74 65 72 20 44 61 80 41 me>G. Pe ter Da�A
0020 6c 6f 69 61 3c 2f 70 65 72 73 6f 6e 4e 61 6d 65 loia</pe rsonName
0030 3e 0d 0a 3c 2f 78 6d 6c 3e 0d 0a >␍</xml >␍
You said you know the character should be ’, but it got totally mangled. It can't be 0x80 in any encoding. This looks like a paste accident where you transferred data between editors/clipboards instead of dealing with just files. If that's not the case, then your cow orker produced a wrong you are not able to right algorithmically.