I'm (trying to) using CSS Lint plugin for Sublime Text 2.
Once I've run it, I can't remove the highlight.
"Escape" just remove the console window.
Hitting again the command just "re-lints".
How can I remove the highlight?
Thanks
Changing the Preferences for a ST2 Plugin
Go to Preferences -> Package Settings -> CSS Lint
Choose Settings - Default to see the default settings for this
plugin.
If there are items in this section you would like to change, copy and paste the default settings in the Settings - User file, and then change them there.
This process will ensure that your changed settings are preserved if/when the plugin is updated.
Another Plugin Option
As a side note, I prefer using SublimeLinter. It includes cssLint and has a pretty robust set of settings options. You can find more information about this plugin on this SO question.
Related
GNU Octave, Version 6.1.0, using the GUI:
Is there a way to clear all variables that are listed in the work environment without restarting Octave and without clicking and clearing every single variable?
This is needed for a cold start when switching to a new task, when you still want to keep opened the already opened files.
Taken from the helpful comments, here are the ways to choose from:
Type "clear" in the editor.
Edit->Clear Workspace in the menu.
Not recommended of course, but possible: you could also just close the GUI and open it again. Then, you should at best use the setting to re-open tabs from the previous session when you close the GUI and open it again. See Edit -> Preferences -> Editor -> File-Handling -> Restore Editor Tabs from previous session on startup or when editor is shown again after closing
I am using Microsoft's VS Code to edit css, html and ts files that are shared by my team on a VSTS Git repo. However, my VS Code keeps removing empty/whitespaces that my colleagues added when I save any change (Image below) and this screws up the whole Git Diff part, as almost every single line of code shows as a diff.
I tried to disable every single config setup but nothings works:
At the end, what was causing my problem was the extension: EditorConfig for VS Code
This plugin attempts to override user/workspace settings with settings
found in .editorconfig files. No additional or vscode-specific files
are required. As with any EditorConfig plugin, if root=true is not
specified, EditorConfig will continue to look for an .editorconfig
file outside of the project.
I believe, it was overriding the options I selected inside of VS Code (such as files.trimTrailingWhitespace: false). So, no setup change I was making was actually being applied.
It seems you have trailing whitespace enabled in User Preferences too.
I'd suggest opening your configuration file of VSCode using
CtrlShiftP or
CmdShiftP in Mac and then go to Open User Settings.
I'm sure the next line is around there somewhere, delete it or change it to false.
files.trimTrailingWhitespace": true
In my case, the JS-CSS-HTML Formatter extension from lonefy
caused the problem.
Editor › Comments: Ignore Empty Lines
——>choose ：false
I have installed Sublime Text2. I want auto formatting php code to PSR Standards. Can anyone please help me how to configure in Sublime Text2
I just yesterday installed one plugin that you could use for PSR-1 and PSR-2.
Link that I found for this is:
sublimetext-codeformatter
Install it in Sublime Text 3 via console and after that you can use from Command Pallete [CTRL + P windows (default keyboard shortcut)] and type format and choose Codeformatter: Format code and this will format your code. You can see also the options for PHP and adapt them as you want, see 2nd image.
Default PHP settings:
I also adjusted my own keyboard shortcut in Preferences -> Keybindings
{ "keys": ["ctrl+alt+l"], "command": "code_formatter"}
If you need something more, tag me below in comments and I'll gladly reply back.
I believe that to achive what you are looking for, there are several steps included:
1) Download and install Sublime PHPCS
2) Configure according php packages you intend to use (Available: PHP_CodeSniffer, PHP Mess Detector, PHP CS Fixer, Scheck and PHP Code Beautifier)
3) Lastly you will need to configure the plugin inside of sublime text.
According to this link here, you can configure it to comply with PSR-2 standard.
Hope this helps!
I would like to edit my default settings in Sublime Text 3 (beta build 3059) to not ignore the Vintage package - via Preferences > Settings - Default. I am running Sublime Text on Windows 7 Pro x64.
The Vintage package's documentation says to edit and save the default settings file to enable Vintage mode:
When I click the Settings - Default menu item, the default Preferences.sublime-settings file opens with expected content; but I cannot edit it. For example, deleting or backspacing to remove "Vintage" in "ignored_packages": ["Vintage"] does nothing.
I thought maybe the default settings file was marked readonly and tried to check it: C:\Users\me\AppData\Roaming\Sublime Text 3\Packages\Default\Preferences.sublime-settings does not exist. C:\Users\me\AppData\Roaming\Sublime Text 3\Packages\Default does not exist either.
To work around this, I tried to save the default settings file that Sublime Text opened for me - to see if that would create the Default directory and Preferences.sublime-settings in it. Instead Sublime Text gave the following error:
Unable to save C:\Users\me\AppData\Roaming\Sublime Text 3\Packages\Default\Preferences.sublime-settings
Error: The system cannot find the path specified.
Has anyone encountered this issue with Sublime Text 3 (specifically in trying to enable Vintage mode or otherwise) and worked around it...or found an authoritative explanation for it?
I reason that next I could try to add the missing Default directory myself, create an empty Preferences.sublime-settings text file in it, and try again to save the default settings file that Sublime Text opened for me; but this is starting to feel kludgy.
You should not edit the default settings. Add the files you want to ignore to the file Packages/User/Preferences.sublime-settings. You can open this file by going to Preferences - >Settings - User. Anything you set here will override the default settings.
I understand that you want to Not ignore the Vintage rather.
This still can be done using the Preferences.sublime-setting-User. AFAIK, any value given in this file overwrites the entries in Preferences.sublime-setting-Default.
Simply add this line with the "Vintage" removed in it to your User preferences and you'll be fine. (Remember to save the file after you did the edit and the change will happen instantly)
Also, not that VI mode in sublime is on edit more by default so make sure you press Esc first to make sure VI is activated.
// Settings in here override those in "Default/Preferences.sublime-settings",
// and are overridden in turn by file type specific settings.
{
"ignored_packages": []
}
Update
The latest format is,
{
"ignored_packages":
[
// Line below is commented out to enable Vintage.
//"Vintage"
],
// To start Sublime in Command moder
// rather than Insert mode.
"vintage_start_in_command_mode": true
}
Install 'PackageResourceViewer' from 'Install Package' in the Command Palette.
Then use 'PackageResourceViewer' command in the Command Palette.
Use that to extract/open the default packages you previously were unable to.
More information here : https://github.com/skuroda/PackageResourceViewer
I use Sublime Text3 recently in Windows 10. I'm trying to change the file: Packages/User/Preferences.sublime-settings. And met your problem "Enable to sa ve Preferences.sublime-settings".
I solve this by changing file Preferences.sublime-settings's property, in Security, edit "user"'s permissions. Allowed to modify.
And then I can edit and save Preferences.sublime-settings
When I install Sublime Text in Linux, I report the message NOTADIRECTORYERROR: [ERRNO 20] NOT A DIRECTORY. At first I thought it was because the Defalut folder was missing, but later I realized it wasn't. I then checked the Settings of my SublimeREPL. Sublime-setings and deleted the contents after bin, and found that the program worked fine.
old: "default_extend_env": {"PATH": "{PATH}:/home/bgnv5/anaconda3/bin/python"},
new: "default_extend_env": {"PATH": "{PATH}:/home/bgnv5/anaconda3/bin/"},
Spent a lot of time to find problems, I hope to help you.
I am on Lion - and in the command line, when I open up my project using "subl ." in my project folder - it opens up the last project I had open before I quit Sublime.
I have the Max Preference "Restore windows when quitting" unchecked.
How to I prevent this behaviour? Is there a preference setting for this?
I think the behavior you want can be enabled by changing the hot_exit and remember_open_files settings. If you check out the "Global Settings - Default" preferences, there are some comments there describing these settings.
If you want to change them, you should override them in the "Global Settings - User" file to preserve your changes across updates.
If anyone is wondering how to do this in sublime text 3, copy and paste the following into settings - user:
"hot_exit": false,
"remember_open_files": false,
I could only get it to work by also setting "hot_exit": false in my preferences.
On Linux, I had an issue where I couldn't even start Sublime Text 3 because there were too many files open and it would hang before I got a chance to change the settings.
I did what Mike Wizowski suggested and edited my $HOME/.config/sublime-text-3/Packages/User/Preferences.sublime-settings to include those settings.
However, restarting Sublime Text after this did not seem to fix my problem because Sublime still opened all the files and folders.
I found that deleting the 2 ".sublime_session" files in $HOME/.config/sublime-text-3/Local/ made Sublime Text forget what the recently opened files/folders were, thus fixing my hanging text editor.