I'm working on a small app that requires the video camera to record the last 20,30,40,50seconds while its continually previewing on my rectangle. I can record and save as I wish but the movies are really big and I cant have the app recording all the time, I only need the last portion of the movie.
I though of putting frames of the movie in a queue but that would be too expensive in data structures as I'm also saving gps data and accelerometer data. I think I need some sort of a buffer so when the user presses save it saves what is in the buffer as a movie.
Any help would be appreciated, I'm not looking for code, just a way round this problem.
use the background timer and invoke the record option at required intervals.
Related
I'm creating a simple games. I've put the expiry date on it. I want to stop that .swf file from working after it reaches expiry date. So far I have only come up with creating a movieclip manually which is sitting on top of the layer. Inside that clip is two frames. First frames has nothing and the second frame have rectangle which is faded. So basically, when the swf file reaches the expiry date, it will go and stop at frame 2 and it won't let anyone to interact with the game. I don't think this is how it's done. So any help will be much appreciate. Does anyone knows how to implement the expiry date and is it possible to make .swf file working ?
You can use the flash's date class to read local or universal time. You can read more on how to use that here, and here. As for the actual implementation, you could run a simple if statement when you go to init the movieclip and, at that point, switch it out for another one or whatever.
If you work with timeline code, you can make your verification on the first frame, if expiry date is not reached go to main logic game frame and if it reach expiry date go to another frame with no code in it.
If you use Classes, you can make your verification in your Main class end after that instanciate your main logic game class in case of expiry date not reached or just do nothing in the other case.
I'm trying to make a program that can convert ORG files into WAV files directly. The ORG format is similar to MIDI, in the sense that it is a list of "instructions" about when and how to play specific instruments, and a program plays these instruments for it to create the song.
However, as I said, I want to generate a WAV directly, instead of just playing the ORG. So, in a sense, I want to "play" the sounds into a WAV. I do know the WAV format and have created some files from raw PCM samples, but this isn't as simple.
The sounds generated by the ORG come from a bunch of files containing WAV samples I have. They're mono, 8-bit samples should be played at 22050Hz. They're all under a second long, and the largest aren't more than 11KB. I would assume that to play them all after each other, I would simply put the samples into the WAV one after the other. It isn't that simple though, as the ORG can have up to 16 different instruments playing at once, and each note of each instrument also has a pan (i.e. a balance, allowing stereo sound). What's more, each ORG has its own tempo (i.e. milliseconds between each point a sound can be played), and some sounds may be longer than this tempo, which means that two sounds on the same instrument can overlap. For instance, a note plays on an instrument, 90 milliseconds later the same note plays on the same instrument, but the first not hasn't finished, hence the first note plays into the second.
I just thought to explain all of that to be sure the situation is clear. In any case, I'd basically like to know how I would go about converting or "playing" an ORG (or if you like, a MIDI (since they're essentially the same)) into a WAV. As I mentioned each note does have a pan/balance, so the WAV would also need to be stereo.
If it matters at all, I'll be doing this in ActionScript 3.0 in FlashDevelop. I don't need any code (as that would be asking someone to do the work for me), but I just want to know how I would go about doing this correctly. An algorithm or two may be handy as well.
First let me say AS3 is not the best language to do these kind of things. Super collider would be a better and easier choice.
But if you want to do it in AS3 here's a general approach. I haven't tested any of it, this is pure theory.
First, put all your sounds into an array, and then find a way of matching the notes from your midi file to a position in the array.
I don't know the format of midi in depth, but I know the smallest value is a tick, and the length of a tick depends on the BPM. Here's the formula to calculate a midi tick: Midi Ticks to Actual PlayBack Seconds !!! ( Midi Music)
Let's say your tick is 2ms in length. So now you have a base value. You can fill a Vector (like an Array but faster) with what happens at every tick. If nothing happens at a particular tick, then insert a null value.
Now the big problem is reading that Vector. It's a problem because the Timer class does not work at small values like 2ms. But what you can do is check the ellapsed time in ms since the app started using getTimer(). You can have some loop that will check the ellapsed time, and whenever you have 2ms more, you read the next index in the Vector. If there are notes on that index, you play the sounds. If not you wait for the next tick.
The problem with this, is that if a loop goes on for more than 15 seconds (I'm not sure of that value) Flash will think the program is not responding and will kill it. So you have to take care of that too, ending the loop and opening a new one before Flash kills your program.
Ok, so now you have sounds playing. You can record the sounds that flash is making (wavs, mp3, mic) with a library called Standing Wave 3.
https://github.com/maxl0rd/standingwave3
This is very theoretical... and I'm quite sure depending on the number of sounds you want to play you can freeze your program... but I hope it will help to get you going.
I'm currently programming a little game which involved that a dynamically created music is playing, and on a specific tone, a function is called to update the game.
I have no problem with dynamically creating music, either using SampleDataEvent.SAMPLE_DATA or the wonderful standingwave2 lib, but I can't find out how to synchronize sound with code.
I know the "sync" note play every X ms (let's say 500), so I've tried to start a timer which ticks every 500ms right after starting the sound, but it gets eventually out of sync. I'm not sure if the timer isn't good enough to follow the path
I know there's a way to put music on Adobe IDE Frames, play sound as "stream" and then put some code on each frame so I can know where it's called, but I can't dynamically create music that way.
So, does anyone knows a way to synchronize my function call with the sound I'm creating ?
I think this depends on when and how does the music generation takes place. If you are generating that music prior to running the game, then you can yield time offset list in that music when the particular tone is generated into that music, then you make a sorted array out of those values, then when the music is actively started, you take flash.utils.getTimer() value and store it as your base time. After this, each frame you check if current getTimer() value is greater than current array position, and if so, the function you want is called, and you advance one position in the array, to be ready for the next pre-set occurrence of your desired tone.
If, on the other hand, you generate music on the fly, a couple of frames length each, then you have to lock getTimer() value at the start of the game and (supposedly) music generation, so that each pair of values you put into sampleData are exactly 1/44100 second of music played. You then count those pairs (on the fly, of course) until it'll be time to insert your desired tone into the generated music, then you'll have an offset from sound start. Convert it to milliseconds, then check each frame if current getTimer() minus stored tick count is greater or equal to discovered offset, and if true, call the function.
As I know sounds playing correlates with frames even if you add them dynamicaly. Try to use Event.ENTER_FRAME. If you know framerate (by default it's equal to 24 fps) and delay (X ms; when a "sync" note plays) then you can get a "sync" frame's index: index = fps * delay. Because for syncronization of a sound and frames important only a nominal fps, not real. Count frames in the Event.ENTER_FRAME handler. When you will achieve the "sync" frame then you can execute your code.
Why don't you just inform your mechanics code about what happens with music when you do render the music handling SampleDataEvent.SAMPLE_DATA? It should be pretty accurate, and you'll never be out of sync for more than one sound chunk (which is usually 2048-4096 float pairs as far as I remember, means 2048/44100 - 4096/44100 ~= 1/22 - 1/11 seconds). Also, I haven't checked this, but I believe, SAMPLE_DATA is fired right after the existing sound chunk started to play, so you can have the next one after it finishes ready, which would mean, if you write down the time of sound render start, then the actual sound will be played the exact that time later(if your system isn't overloaded), so you can calculate it very precisely, down to milliseconds.
You need to enapsulate that WAV generated music within a FLV stream (using only audio tags). Between the FLV audio tags insert FLV metadata tags, which you will receive through onMetaData just when that portion is playing. Since you are generating music on the fly, you might wanna use NetStream.appendBytes() instead of just passing WAV files to NetStream.
You need to familiarize yourself with how FLV works, how appendBytes works and how to create a FLV (which you write into appendBytes() as if you are writing it to a file) which contains WAV audio.
I'm writing a recorder for website with flash using the flash.events.SampleDataEvent from the Microphone. But there is one strange thing:
At the beginning the SampleEvent occurs approximately every second. That's really slow. But after waiting a while in front of the browser and starting it again, it's very fast.
So 2 questions:
Is there a way to influence the time between the events
Why is this happening?
Thanks in advance
That is kind of strange. There's no way to tell the event when to dispatch. It just gets triggered when the microphone has sound data in the buffer. For some reason, it doesn't seem like your microphone is recording very much data at first. Try adjusting Microphone.gain and also Microphone.rate. Higher gain will amplify what you are recording to hopefully trigger the event faster and increasing the rate will give you more samples per event.
I'm writing an app that requires an audio stream to be recording while a backing track is played. I have this working, but there is an inconsistent gap in between playback and record starting.
I don't know if I can do anything to make the sync perfect every time, so I've been trying to track what time each stream starts so I can calculate the delay and trim it server-side. This also has proved to be a challenge as no events seem to be sent when a connection starts (as far as I know). I've tried using various properties like the streams' buffer sizes, etc.
I'm thinking now that as my recorded audio is only mono, I may be able to put some kind of 'control signal' on the second stereo track which I could use to determine exactly when a sound starts recording (or stick the whole backing track in that channel so I can sync them that way). This leaves me with the new problem of properly injecting this sound into the NetStream.
If anyone has any idea whether or not any of these ideas will work, how to execute them, or some alternatives, that would be extremely helpful! Been working on this issue for awhile
The only thing that comes to mind is to try and use metadata, flash media streams support metadata and the onMetaData callback. I assume you're using flash media server for the audio coming in and to record the audio going out. If you use the send method while your streaming the audio back to the server, you can put the listening audio track's playhead timestamp in it, so when you get the 2 streams back to the server you can mux them together properly. You can also try encoding the audio that is streamed to the client with metadata and try and use onMetaData to sync them up. I'm not sure how to do this, but a second approach is to try and combine the 2 streams together as the audio goes back so that you don't need to mux them later, or attach it to a blank video stream with 2 audio tracks...
If you're to inject something into the NetStream... As complex as SOUND... I guess here it would be better to go with Socket instead. You'll be directly reading bytes. It's possible there's a compression on the NetStream, so the data sent is not raw sound data - some class for decompressing the codec there would be needed. When you finally get the raw sound data, add the input in there, using Socket.readUnsignedByte() or Socket.readFloat(), and write back the modified data using Socket.writeByte(), or Socket.writeFloat().
This is the alternative with injecting the back into the audio.
For syncing, it is actually quite simple. Even though the data might not be sent instantly, one thing still stays the same - time. So, when user's audio is finished, just mix it without anything else to the back track - the time should stay the same.
IF the user has slow internet DOWNLOAD, so that his backtrack has unwanted breaks - check in the SWF if the data is buffered enough to add the next sound buffer (usually 4096 bytes if I remember correctly). If yes, continue streaming user's audio.
If not, do NOT stream, and start as soon as the data catches back on.
In my experience NetStream is one of the most inaccurate and dirty features of Flash (NetStream:play2 ?!!), which btw is quite ironic seeing how Flash's primary use is probably video playback.
Trying to sync it with anything else in a reliable way is very hard... events and statuses are not very straight forward, and there are multiple issues that can spoil your syncing.
Luckily however, netStream.time will tell you quite accurately the current playhead position, so you can eventually use that to determine starting time, delays, dropped frames, etc... Notice that determining the actual starting time is a bit tricky though. When you start loading a netStream, the time value is zero, but when it shows the first frame and is waiting for the buffer to fill (not playing yet) the time value is something like 0.027 (depends on the video), so you need to very carefully monitor this value to accurately determine events.
An alternative to using NetStream is embedding the video in a SWF file, which should make synchronization much easier (specially if you use frequent keyframes on encoding). But you will lose quality/filesize ratio (If I remember correctly you can only use FLV, not h264).
no events seem to be sent when a connection starts
sure there does.. NetStatusEvent.NET_STATUS fires for a multitude of reasons for NetConnections and Netstreams, you just have to add a listener and process the contents of NET_STATUS.info
the as3 reference docs here and you're looking for NET_STATUS.info