Related
I am working on a web application where I want the content to fill the height of the entire screen.
The page has a header, which contains a logo, and account information. This could be an arbitrary height. I want the content div to fill the rest of the page to the bottom.
I have a header div and a content div. At the moment I am using a table for the layout like so:
CSS and HTML
#page {
height: 100%; width: 100%
}
#tdcontent {
height: 100%;
}
#content {
overflow: auto; /* or overflow: hidden; */
}
<table id="page">
<tr>
<td id="tdheader">
<div id="header">...</div>
</td>
</tr>
<tr>
<td id="tdcontent">
<div id="content">...</div>
</td>
</tr>
</table>
The entire height of the page is filled, and no scrolling is required.
For anything inside the content div, setting top: 0; will put it right underneath the header. Sometimes the content will be a real table, with its height set to 100%. Putting header inside content will not allow this to work.
Is there a way to achieve the same effect without using the table?
Update:
Elements inside the content div will have heights set to percentages as well. So something at 100% inside the div will fill it to the bottom. As will two elements at 50%.
Update 2:
For instance, if the header takes up 20% of the screen's height, a table specified at 50% inside #content would take up 40% of the screen space. So far, wrapping the entire thing in a table is the only thing that works.
2015 update: the flexbox approach
There are two other answers briefly mentioning flexbox; however, that was more than two years ago, and they don't provide any examples. The specification for flexbox has definitely settled now.
Note: Though CSS Flexible Boxes Layout specification is at the Candidate Recommendation stage, not all browsers have implemented it. WebKit implementation must be prefixed with -webkit-; Internet Explorer implements an old version of the spec, prefixed with -ms-; Opera 12.10 implements the latest version of the spec, unprefixed. See the compatibility table on each property for an up-to-date compatibility status.
(taken from https://developer.mozilla.org/en-US/docs/Web/Guide/CSS/Flexible_boxes)
All major browsers and IE11+ support Flexbox. For IE 10 or older, you can use the FlexieJS shim.
To check current support you can also see here:
http://caniuse.com/#feat=flexbox
Working example
With flexbox you can easily switch between any of your rows or columns either having fixed dimensions, content-sized dimensions or remaining-space dimensions. In my example I have set the header to snap to its content (as per the OPs question), I've added a footer to show how to add a fixed-height region and then set the content area to fill up the remaining space.
html,
body {
height: 100%;
margin: 0;
}
.box {
display: flex;
flex-flow: column;
height: 100%;
}
.box .row {
border: 1px dotted grey;
}
.box .row.header {
flex: 0 1 auto;
/* The above is shorthand for:
flex-grow: 0,
flex-shrink: 1,
flex-basis: auto
*/
}
.box .row.content {
flex: 1 1 auto;
}
.box .row.footer {
flex: 0 1 40px;
}
<!-- Obviously, you could use HTML5 tags like `header`, `footer` and `section` -->
<div class="box">
<div class="row header">
<p><b>header</b>
<br />
<br />(sized to content)</p>
</div>
<div class="row content">
<p>
<b>content</b>
(fills remaining space)
</p>
</div>
<div class="row footer">
<p><b>footer</b> (fixed height)</p>
</div>
</div>
In the CSS above, the flex property shorthands the flex-grow, flex-shrink, and flex-basis properties to establish the flexibility of the flex items. Mozilla has a good introduction to the flexible boxes model.
There really isn't a sound, cross-browser way to do this in CSS. Assuming your layout has complexities, you need to use JavaScript to set the element's height. The essence of what you need to do is:
Element Height = Viewport height - element.offset.top - desired bottom margin
Once you can get this value and set the element's height, you need to attach event handlers to both the window onload and onresize so that you can fire your resize function.
Also, assuming your content could be larger than the viewport, you will need to set overflow-y to scroll.
The original post is more than 3 years ago. I guess many people who come to this post like me are looking for an app-like layout solution, say a somehow fixed header, footer, and full height content taking up the rest screen. If so, this post may help, it works on IE7+, etc.
http://blog.stevensanderson.com/2011/10/05/full-height-app-layouts-a-css-trick-to-make-it-easier/
And here are some snippets from that post:
#media screen {
/* start of screen rules. */
/* Generic pane rules */
body { margin: 0 }
.row, .col { overflow: hidden; position: absolute; }
.row { left: 0; right: 0; }
.col { top: 0; bottom: 0; }
.scroll-x { overflow-x: auto; }
.scroll-y { overflow-y: auto; }
.header.row { height: 75px; top: 0; }
.body.row { top: 75px; bottom: 50px; }
.footer.row { height: 50px; bottom: 0; }
/* end of screen rules. */
}
<div class="header row" style="background:yellow;">
<h2>My header</h2>
</div>
<div class="body row scroll-y" style="background:lightblue;">
<p>The body</p>
</div>
<div class="footer row" style="background:#e9e9e9;">
My footer
</div>
Instead of using tables in the markup, you could use CSS tables.
Markup
<body>
<div>hello </div>
<div>there</div>
</body>
(Relevant) CSS
body
{
display:table;
width:100%;
}
div
{
display:table-row;
}
div+ div
{
height:100%;
}
FIDDLE1 and FIDDLE2
Some advantages of this method are:
1) Less markup
2) Markup is more semantic than tables, because this is not tabular data.
3) Browser support is very good: IE8+, All modern browsers and mobile devices (caniuse)
Just for completeness, here are the equivalent Html elements to css properties for the The CSS table model
table { display: table }
tr { display: table-row }
thead { display: table-header-group }
tbody { display: table-row-group }
tfoot { display: table-footer-group }
col { display: table-column }
colgroup { display: table-column-group }
td, th { display: table-cell }
caption { display: table-caption }
CSS only Approach (If height is known/fixed)
When you want the middle element to span across entire page vertically, you can use calc() which is introduced in CSS3.
Assuming we have a fixed height header and footer elements and we want the section tag to take entire available vertical height...
Demo
Assumed markup and your CSS should be
html,
body {
height: 100%;
}
header {
height: 100px;
background: grey;
}
section {
height: calc(100% - (100px + 150px));
/* Adding 100px of header and 150px of footer */
background: tomato;
}
footer {
height: 150px;
background-color: blue;
}
<header>100px</header>
<section>Expand me for remaining space</section>
<footer>150px</footer>
So here, what am doing is, adding up the height of elements and than deducting from 100% using calc() function.
Just make sure that you use height: 100%; for the parent elements.
A simple solution, using flexbox:
html,
body {
height: 100%;
}
body {
display: flex;
flex-direction: column;
}
.content {
flex-grow: 1;
}
<body>
<div>header</div>
<div class="content"></div>
</body>
Codepen sample
An alternate solution, with a div centered within the content div
Used:
height: calc(100vh - 110px);
code:
.header { height: 60px; top: 0; background-color: green}
.body {
height: calc(100vh - 110px); /*50+60*/
background-color: gray;
}
.footer { height: 50px; bottom: 0; }
<div class="header">
<h2>My header</h2>
</div>
<div class="body">
<p>The body</p>
</div>
<div class="footer">
My footer
</div>
How about you simply use vh which stands for view height in CSS...
Look at the code snippet I created for you below and run it:
body {
padding: 0;
margin: 0;
}
.full-height {
width: 100px;
height: 100vh;
background: red;
}
<div class="full-height">
</div>
Also, look at the image below which I created for you:
None of the solutions posted work when you need the bottom div to scroll when the content is too tall. Here's a solution that works in that case:
.table {
display: table;
}
.table-row {
display: table-row;
}
.table-cell {
display: table-cell;
}
.container {
width: 400px;
height: 300px;
}
.header {
background: cyan;
}
.body {
background: yellow;
height: 100%;
}
.body-content-outer-wrapper {
height: 100%;
}
.body-content-inner-wrapper {
height: 100%;
position: relative;
overflow: auto;
}
.body-content {
position: absolute;
top: 0;
bottom: 0;
left: 0;
right: 0;
}
<div class="table container">
<div class="table-row header">
<div>This is the header whose height is unknown</div>
<div>This is the header whose height is unknown</div>
<div>This is the header whose height is unknown</div>
</div>
<div class="table-row body">
<div class="table-cell body-content-outer-wrapper">
<div class="body-content-inner-wrapper">
<div class="body-content">
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
</div>
</div>
</div>
</div>
</div>
Original source: Filling the Remaining Height of a Container While Handling Overflow in CSS
JSFiddle live preview
CSS3 Simple Way
height: calc(100% - 10px); // 10px is height of your first div...
all major browsers these days support it, so go ahead if you don't have requirement to support vintage browsers.
It could be done purely by CSS using vh:
#page {
display:block;
width:100%;
height:95vh !important;
overflow:hidden;
}
#tdcontent {
float:left;
width:100%;
display:block;
}
#content {
float:left;
width:100%;
height:100%;
display:block;
overflow:scroll;
}
and the HTML
<div id="page">
<div id="tdcontent"></div>
<div id="content"></div>
</div>
I checked it, It works in all major browsers: Chrome, IE, and FireFox
Disclaimer: The accepted answer gives the idea of the solution, but I'm finding it a bit bloated with an unnecessary wrapper and css rules. Below is a solution with very few css rules.
HTML 5
<body>
<header>Header with an arbitrary height</header>
<main>
This container will grow so as to take the remaining height
</main>
</body>
CSS
body {
display: flex;
flex-direction: column;
min-height: 100vh; /* body takes whole viewport's height */
}
main {
flex: 1; /* this will make the container take the free space */
}
Solution above uses viewport units and flexbox, and is therefore IE10+, providing you use the old syntax for IE10.
Codepen to play with: link to codepen
Or this one, for those needing the main container to be scrollable in case of overflowing content: link to codepen
I've been searching for an answer for this as well. If you are fortunate enough to be able to target IE8 and up, you can use display:table and related values to get the rendering rules of tables with block-level elements including div.
If you are even luckier and your users are using top-tier browsers (for example, if this is an intranet app on computers you control, like my latest project is), you can use the new Flexible Box Layout in CSS3!
What worked for me (with a div within another div and I assume in all other circumstances) is to set the bottom padding to 100%. That is, add this to your css / stylesheet:
padding-bottom: 100%;
In Bootstrap:
CSS Styles:
html, body {
height: 100%;
}
1) Just fill the height of the remaining screen space:
<body class="d-flex flex-column">
<div class="d-flex flex-column flex-grow-1">
<header>Header</header>
<div>Content</div>
<footer class="mt-auto">Footer</footer>
</div>
</body>
2) fill the height of the remaining screen space and aligning content to the middle of the parent element:
<body class="d-flex flex-column">
<div class="d-flex flex-column flex-grow-1">
<header>Header</header>
<div class="d-flex flex-column flex-grow-1 justify-content-center">Content</div>
<footer class="mt-auto">Footer</footer>
</div>
</body>
If you can deal with not supporting old browsers (that is, MSIE 9 or older), you can do this with Flexible Box Layout Module which is already W3C CR. That module allows other nice tricks, too, such as re-ordering content.
Unfortunately, MSIE 9 or lesser do not support this and you have to use vendor prefix for the CSS property for every browser other than Firefox. Hopefully other vendors drop the prefix soon, too.
An another choice would be CSS Grid Layout but that has even less support from stable versions of browsers. In practice, only MSIE 10 supports this.
Update year 2020: All modern browsers support both display: flex and display: grid. The only one missing is support for subgrid which in only supported by Firefox. Note that MSIE does not support either by the spec but if you're willing to add MSIE specific CSS hacks, it can be made to behave. I would suggest simply ignoring MSIE because even Microsoft says it should not be used anymore. Microsoft Edge supports these features just fine (except for subgrid support since is shares the Blink rendering engine with Chrome).
Example using display: grid:
html, body
{
min-height: 100vh;
padding: 0;
margin: 0;
}
body
{
display: grid;
grid:
"myheader" auto
"mymain" minmax(0,1fr)
"myfooter" auto /
minmax(10rem, 90rem);
}
header
{
grid-area: myheader;
background: yellow;
}
main
{
grid-area: mymain;
background: pink;
align-self: center
/* or stretch
+ display: flex;
+ flex-direction: column;
+ justify-content: center; */
}
footer
{
grid-area: myfooter;
background: cyan;
}
<header>Header content</header>
<main>Main content which should be centered and the content length may change.
<details><summary>Collapsible content</summary>
<p>Here's some text to cause more vertical space to be used.</p>
<p>Here's some text to cause more vertical space to be used (2).</p>
<p>Here's some text to cause more vertical space to be used (3).</p>
<p>Here's some text to cause more vertical space to be used (4).</p>
<p>Here's some text to cause more vertical space to be used (5).</p>
</details>
</main>
<footer>Footer content</footer>
Example using display: flex:
html, body
{
min-height: 100vh;
padding: 0;
margin: 0;
}
body
{
display: flex;
}
main
{
background: pink;
align-self: center;
}
<main>Main content which should be centered and the content length may change.
<details><summary>Collapsible content</summary>
<p>Here's some text to cause more vertical space to be used.</p>
<p>Here's some text to cause more vertical space to be used (2).</p>
<p>Here's some text to cause more vertical space to be used (3).</p>
<p>Here's some text to cause more vertical space to be used (4).</p>
<p>Here's some text to cause more vertical space to be used (5).</p>
</details>
</main>
There's a ton of answers now, but I found using height: 100vh; to work on the div element that needs to fill up the entire vertical space available.
In this way, I do not need to play around with display or positioning. This came in handy when using Bootstrap to make a dashboard wherein I had a sidebar and a main. I wanted the main to stretch and fill the entire vertical space so that I could apply a background colour.
div {
height: 100vh;
}
Supports IE9 and up: click to see the link
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Test</title>
<style type="text/css">
body
,html
{
height: 100%;
margin: 0;
padding: 0;
color: #FFF;
}
#header
{
float: left;
width: 100%;
background: red;
}
#content
{
height: 100%;
overflow: auto;
background: blue;
}
</style>
</head>
<body>
<div id="content">
<div id="header">
Header
<p>Header stuff</p>
</div>
Content
<p>Content stuff</p>
</div>
</body>
</html>
In all sane browsers, you can put the "header" div before the content, as a sibling, and the same CSS will work. However, IE7- does not interpret the height correctly if the float is 100% in that case, so the header needs to be IN the content, as above. The overflow: auto will cause double scroll bars on IE (which always has the viewport scrollbar visible, but disabled), but without it, the content will clip if it overflows.
CSS Grid Solution
Just defining the body with display:grid and the grid-template-rows using auto and the fr value property.
* {
margin: 0;
padding: 0;
}
html {
height: 100%;
}
body {
min-height: 100%;
display: grid;
grid-template-rows: auto 1fr auto;
}
header {
padding: 1em;
background: pink;
}
main {
padding: 1em;
background: lightblue;
}
footer {
padding: 2em;
background: lightgreen;
}
main:hover {
height: 2000px;
/* demos expansion of center element */
}
<header>HEADER</header>
<main>MAIN</main>
<footer>FOOTER</footer>
A Complete Guide to Grids # CSS-Tricks.com
This is my own minimal version of Pebbl's solution. Took forever to find the trick to get it to work in IE11. (Also tested in Chrome, Firefox, Edge, and Safari.)
html {
height: 100%;
}
body {
height: 100%;
margin: 0;
}
section {
display: flex;
flex-direction: column;
height: 100%;
}
div:first-child {
background: gold;
}
div:last-child {
background: plum;
flex-grow: 1;
}
<body>
<section>
<div>FIT</div>
<div>GROW</div>
</section>
</body>
I wresteled with this for a while and ended up with the following:
Since it is easy to make the content DIV the same height as the parent but apparently difficult to make it the parent height minus the header height I decided to make content div full height but position it absolutely in the top left corner and then define a padding for the top which has the height of the header. This way the content displays neatly under the header and fills the whole remaining space:
body {
padding: 0;
margin: 0;
height: 100%;
overflow: hidden;
}
#header {
position: absolute;
top: 0;
left: 0;
height: 50px;
}
#content {
position: absolute;
top: 0;
left: 0;
padding-top: 50px;
height: 100%;
}
Why not just like this?
html, body {
height: 100%;
}
#containerInput {
background-image: url('../img/edit_bg.jpg');
height: 40%;
}
#containerControl {
background-image: url('../img/control_bg.jpg');
height: 60%;
}
Giving you html and body (in that order) a height and then just give your elements a height?
Works for me
You can actually use display: table to split the area into two elements (header and content), where the header can vary in height and the content fills the remaining space. This works with the whole page, as well as when the area is simply the content of another element positioned with position set to relative, absolute or fixed. It will work as long as the parent element has a non-zero height.
See this fiddle and also the code below:
CSS:
body, html {
height: 100%;
margin: 0;
padding: 0;
}
p {
margin: 0;
padding: 0;
}
.additional-padding {
height: 50px;
background-color: #DE9;
}
.as-table {
display: table;
height: 100%;
width: 100%;
}
.as-table-row {
display: table-row;
height: 100%;
}
#content {
width: 100%;
height: 100%;
background-color: #33DD44;
}
HTML:
<div class="as-table">
<div id="header">
<p>This header can vary in height, it also doesn't have to be displayed as table-row. It will simply take the necessary space and the rest below will be taken by the second div which is displayed as table-row. Now adding some copy to artificially expand the header.</p>
<div class="additional-padding"></div>
</div>
<div class="as-table-row">
<div id="content">
<p>This is the actual content that takes the rest of the available space.</p>
</div>
</div>
</div>
style="height:100vh"
solved the problem for me. In my case I applied this to the required div
Vincent, I'll answer again using your new requirements. Since you don't care about the content being hidden if it's too long, you don't need to float the header. Just put overflow hidden on the html and body tags, and set #content height to 100%. The content will always be longer than the viewport by the height of the header, but it'll be hidden and won't cause scrollbars.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Test</title>
<style type="text/css">
body, html {
height: 100%;
margin: 0;
padding: 0;
overflow: hidden;
color: #FFF;
}
p {
margin: 0;
}
#header {
background: red;
}
#content {
position: relative;
height: 100%;
background: blue;
}
#content #positioned {
position: absolute;
top: 0;
right: 0;
}
</style>
</head>
<body>
<div id="header">
Header
<p>Header stuff</p>
</div>
<div id="content">
Content
<p>Content stuff</p>
<div id="positioned">Positioned Content</div>
</div>
</body>
</html>
For mobile app i use only VH and VW
<div class="container">
<div class="title">Title</div>
<div class="content">Content</div>
<div class="footer">Footer</div>
</div>
.container {
width: 100vw;
height: 100vh;
font-size: 5vh;
}
.title {
height: 20vh;
background-color: red;
}
.content {
height: 60vh;
background: blue;
}
.footer {
height: 20vh;
background: green;
}
Demo - https://jsfiddle.net/u763ck92/
Try this
var sizeFooter = function(){
$(".webfooter")
.css("padding-bottom", "0px")
.css("padding-bottom", $(window).height() - $("body").height())
}
$(window).resize(sizeFooter);
I had the same problem but I could not make work the solution with flexboxes above. So I created my own template, that includes:
a header with a fixed size element
a footer
a side bar with a scrollbar that occupies the remaining height
content
I used flexboxes but in a more simple way, using only properties display: flex and flex-direction: row|column:
I do use angular and I want my component sizes to be 100% of their parent element.
The key is to set the size (in percents) for all parents inorder to limit their size. In the following example myapp height has 100% of the viewport.
The main component has 90% of the viewport, because header and footer have 5%.
I posted my template here: https://jsfiddle.net/abreneliere/mrjh6y2e/3
body{
margin: 0;
color: white;
height: 100%;
}
div#myapp
{
display: flex;
flex-direction: column;
background-color: red; /* <-- painful color for your eyes ! */
height: 100%; /* <-- if you remove this line, myapp has no limited height */
}
div#main /* parent div for sidebar and content */
{
display: flex;
width: 100%;
height: 90%;
}
div#header {
background-color: #333;
height: 5%;
}
div#footer {
background-color: #222;
height: 5%;
}
div#sidebar {
background-color: #666;
width: 20%;
overflow-y: auto;
}
div#content {
background-color: #888;
width: 80%;
overflow-y: auto;
}
div.fized_size_element {
background-color: #AAA;
display: block;
width: 100px;
height: 50px;
margin: 5px;
}
Html:
<body>
<div id="myapp">
<div id="header">
HEADER
<div class="fized_size_element"></div>
</div>
<div id="main">
<div id="sidebar">
SIDEBAR
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
</div>
<div id="content">
CONTENT
</div>
</div>
<div id="footer">
FOOTER
</div>
</div>
</body>
Spinning off the idea of Mr. Alien...
This seems a cleaner solution than the popular flex box one for CSS3 enabled browsers.
Simply use min-height(instead of height) with calc() to the content block.
The calc() starts with 100% and subtracts heights of headers and footers (need to include padding values)
Using "min-height" instead of "height" is particularly useful so it can work with javascript rendered content and JS frameworks like Angular2. Otherwise, the calculation will not push the footer to the bottom of the page once the javascript rendered content is visible.
Here is a simple example of a header and footer using 50px height and 20px padding for both.
Html:
<body>
<header></header>
<div class="content"></div>
<footer></footer>
</body>
Css:
.content {
min-height: calc(100% - (50px + 20px + 20px + 50px + 20px + 20px));
}
Of course, the math can be simplified but you get the idea...
I found a quite simple solution, because for me it was just a design issue.
I wanted the rest of the Page not to be white below the red footer.
So i set the pages background color to red. And the contents backgroundcolor to white.
With the contents height set to eg. 20em or 50% an almost empty page won't leave the whole page red.
I am working on getting the layout sorted for a pretty simple gallery webapp, but when I use an HTML5 doctype declaration, the height of some of my divs (which were 100%) get shrunk right down, and I can't seem to plump them back up using CSS.
My HTML is at https://dl.dropbox.com/u/16178847/eyewitness/b/index.html and css is at https://dl.dropbox.com/u/16178847/eyewitness/b/style.css
If I remove the HTML5 doctype declaration, all is as I want it to be,
but I really want to use the proper HTML5 doctype declaration.
If I set the doctype to HTML5 and make no changes, the div with the photo and the footer divs are not visible, presumably because they are 0px high.
If I set the doctype to HTML5 and make the body { height: 100px } and .container { height: 100px } or .container { height: 100% }, it becomes visible, but what I need is it to be is full height rather than a height in pixels.
If I try to do the same as above, but with the body { height: 100% } the photo and footer divs are not visible again.
What do I need to do to get it 100% in height so that my photo and footer divs are full height?
Only if the parent element has a defined height, i..e not a value of auto. If that has 100% height, the parent's parent height must be defined, too. This could go until to the html root element.
So set the height of the html and the body element to 100%, as well as every single ancestor element of that element that you wish to have the 100% height in the first place.
See this example, to make it clearer:
html, body, .outer, .inner, .content {
height: 100%;
padding: 10px;
margin: 0;
background-color: rgba(255,0,0,.1);
box-sizing: border-box;
}
<div class="outer">
<div class="inner">
<div class="content">
Content
</div>
</div>
</div>
This wouldn't work, if I didn't give 100% height to—say html element:
body, .outer, .inner, .content {
height: 100%;
padding: 10px;
margin: 0;
background-color: rgba(255,0,0,.1);
box-sizing: border-box;
}
<div class="outer">
<div class="inner">
<div class="content">
Content
</div>
</div>
</div>
… or .inner
html, body, .outer, .content {
height: 100%;
padding: 10px;
margin: 0;
background-color: rgba(255,0,0,.1);
box-sizing: border-box;
}
<div class="outer">
<div class="inner">
<div class="content">
Content
</div>
</div>
</div>
Indeed, to make it work do as follow:
<!DOCTYPE html>
<html>
<head>
<title>Vertical Scrolling Demo</title>
<style>
html, body {
width: 100%;
height: 100%;
background: white;
margin:0;
padding:0;
}
.page {
min-height: 100%;
width: 100%;
}
</style>
</head>
<body>
<div id="nav" class="page">
<ul>
<li>About</li>
<li>Portfolio</li>
<li>Contact</li>
</ul>
</div>
<div id="page1" class="page">
<h1><a name="about">about</a></h1>
About page content goes here.
</div>
<div id="page2" class="page">
<h1><a name="portfolio">portfolio</a></h1>
Portfolio page content goes here.
</div>
<div id="page3" class="page">
<h1><a name="contact">contact</a></h1>
Contact page content goes here.
</div>
</body>
</html>
I got stuck into a similar problema to size a canvas, so here is what i did and worked perfectly.
Besides doing the:
body{ width: 100%; height: 100%;}
Set the desired element like this:
.desired-element{ width: 100vw; height: 100vh}
In that way you are assured to have 100% of the view port in width and height.
vw stands for viewwidth
and
vh stands for viewheight
I hope this helps someone
I am new in Grails and displaying list of users by using list.gsp page but when list have less items say 1 or 2 then footer is appears after two record instead of taking it's fix position at bottom of browser.
I have tried by updating my css in main.css and also applying css to 'g:layoutBody' tag.but result is same.
Any one can please help me how to set footer at bottom.
i am using following css in 'g:layoutBody' tag-
<g:layoutBody style="position: fixed;left: 0px;bottom: 30px;width: 100%;"/>
my main.css has this code -
body {
background: #ffffff;
color: #333333;
margin: 0 auto;
max-width: inherit;
margin-left:20px;
margin-right:20px;
overflow-x: hidden; /* prevents box-shadow causing a horizontal scrollbar in firefox when viewport < 960px wide */
-moz-box-shadow: 0 0 0.3em #255b17;
-webkit-box-shadow: 0 0 0.3em #255b17;
box-shadow: 0 0 0.3em #255b17;
}
and footer css is
.footer {
background: #abbf78;
color: #000;
clear: both;
font-size: 0.8em;
margin-top: 1.5em;
padding: 1em;
min-height: 1em;
}
.footer a {
color: #255b17;
}
This is a purely HTML/CSS issue, so the same applies for GSPs and standard HTML pages.
What you're after is a "sticky footer", and it can be most easily achieved by wrapping your content in a container which pushes the footer to the bottom of the page.
Here's a working example (updated with content from question): http://jsfiddle.net/spikeheap/ujttV/2/
The key bits are to structure the HTML with something which extends below your content:
<body>
<div class="wrapper">
<div id="content">
...
</div>
</div>
<div class="footer">
This is a footer message
</div>
</body>
Then you can use CSS to set the height of the wrapper to be 100%:
html, body{
height: 100%;
}
.wrapper {
min-height: 100%;
}
Finally your footer can be clever and pull itself up from below the bottom of the page by using a negative margin-top:
.footer {
position: relative;
margin-top: -200px;
height: 200px;
background-color: #cecece;
}
You'll notice pretty quickly that if you make the window really small, or grow your content, that it's truncated, so your content block should have padding equal to the footer height (to make sure it pushes it down when it fills the space:
#content {
padding-bottom: 200px;
}
Update
The layoutBody tag is used for rendering the body of your gsp, so you could have layouts/mytemplate.gsp:
<!DOCTYPE html>
<html>
<head>
<g:layoutHead />
</head>
<body>
<div class="wrapper">
<div id="content">
<g:layoutBody />
</div>
</div>
<div class="footer">
This is a footer message
</div>
</body>
And then in (for example) index.gsp:
<head>
<meta name="layout" content="mytemplate">
</head>
<body>
Welcome to my website. Check out the amazing footer
</body>
I am attempting to create a webpage layout template my aim is header, footer and 2 column between, the 2 columns are what are giving me the biggest headache, I want the left column to be a fixed width, and the right column to fill the remaining area, I have successfully completed this also. But I also want both columns’ to fill the raining space vertically also and when the content fills more than the space I am looking each column to be scolded separately and not use the normal Brower scroll bar
My current html code is as follows
HTML
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1 /DTD/xhtml1-strict.dtd"><html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<link rel="stylesheet" type="text/css" href="./style/default/style.css" />
</head>
<body>
<div class="container">
<div class="header">
HEADER
</div>
<div class="content">
<div class="content-contain">
<div id="content-col1">
COLUMN 1
</div>
<div id="content-col2">
COLUMN 2
</div>
</div>
</div>
</div>
<div class="footer">
FOOTER
</div>
</body>
</html>
CSS
* {
margin: auto;
}
html, body {
height: 99%;
background-color: #FFFFFF;
font-family:sans-serif;
}
.container {
min-height: 100%;
height: auto !important;
height: 99%;
margin: 0 auto -1em;
}
.header {
color:#FFFFFF;
background-color:blue;
border-bottom:3px solid blue;
}
div#content-col1{
float:left;
width:220px;
padding:3px;
display:block;
padding-left:5px;
overflow-y: auto;
background-color: red;
}
div#content-col2{
margin-left: 230px;
margin-bottom:40px;
padding: 3px;
overflow-y: auto;
background-color: green;
}
.footer {
background-color:yellow;
clear:both;
}
If anyone has a better or know what I can do to make this work sucessfully please let me know
Vip32
To fill the entire width with two columns where one has a fixed with, please refer to this question.
Vertical filling is a little different. On default, the body and block elements have a dynamic height. Because the body is dynamic too, you have to set it an height in order to make the content full vertically as well.
body, div#container, ... { height: 100%; }
Some people think it's best to apply an height to the html element as well. I have my doubts, because that tag is not visible.
If you have an element that requires some height as well, like an header, or footer, please refer to the same solution for fixed width's but apply it on the height instead.
I am working on a web application where I want the content to fill the height of the entire screen.
The page has a header, which contains a logo, and account information. This could be an arbitrary height. I want the content div to fill the rest of the page to the bottom.
I have a header div and a content div. At the moment I am using a table for the layout like so:
CSS and HTML
#page {
height: 100%; width: 100%
}
#tdcontent {
height: 100%;
}
#content {
overflow: auto; /* or overflow: hidden; */
}
<table id="page">
<tr>
<td id="tdheader">
<div id="header">...</div>
</td>
</tr>
<tr>
<td id="tdcontent">
<div id="content">...</div>
</td>
</tr>
</table>
The entire height of the page is filled, and no scrolling is required.
For anything inside the content div, setting top: 0; will put it right underneath the header. Sometimes the content will be a real table, with its height set to 100%. Putting header inside content will not allow this to work.
Is there a way to achieve the same effect without using the table?
Update:
Elements inside the content div will have heights set to percentages as well. So something at 100% inside the div will fill it to the bottom. As will two elements at 50%.
Update 2:
For instance, if the header takes up 20% of the screen's height, a table specified at 50% inside #content would take up 40% of the screen space. So far, wrapping the entire thing in a table is the only thing that works.
2015 update: the flexbox approach
There are two other answers briefly mentioning flexbox; however, that was more than two years ago, and they don't provide any examples. The specification for flexbox has definitely settled now.
Note: Though CSS Flexible Boxes Layout specification is at the Candidate Recommendation stage, not all browsers have implemented it. WebKit implementation must be prefixed with -webkit-; Internet Explorer implements an old version of the spec, prefixed with -ms-; Opera 12.10 implements the latest version of the spec, unprefixed. See the compatibility table on each property for an up-to-date compatibility status.
(taken from https://developer.mozilla.org/en-US/docs/Web/Guide/CSS/Flexible_boxes)
All major browsers and IE11+ support Flexbox. For IE 10 or older, you can use the FlexieJS shim.
To check current support you can also see here:
http://caniuse.com/#feat=flexbox
Working example
With flexbox you can easily switch between any of your rows or columns either having fixed dimensions, content-sized dimensions or remaining-space dimensions. In my example I have set the header to snap to its content (as per the OPs question), I've added a footer to show how to add a fixed-height region and then set the content area to fill up the remaining space.
html,
body {
height: 100%;
margin: 0;
}
.box {
display: flex;
flex-flow: column;
height: 100%;
}
.box .row {
border: 1px dotted grey;
}
.box .row.header {
flex: 0 1 auto;
/* The above is shorthand for:
flex-grow: 0,
flex-shrink: 1,
flex-basis: auto
*/
}
.box .row.content {
flex: 1 1 auto;
}
.box .row.footer {
flex: 0 1 40px;
}
<!-- Obviously, you could use HTML5 tags like `header`, `footer` and `section` -->
<div class="box">
<div class="row header">
<p><b>header</b>
<br />
<br />(sized to content)</p>
</div>
<div class="row content">
<p>
<b>content</b>
(fills remaining space)
</p>
</div>
<div class="row footer">
<p><b>footer</b> (fixed height)</p>
</div>
</div>
In the CSS above, the flex property shorthands the flex-grow, flex-shrink, and flex-basis properties to establish the flexibility of the flex items. Mozilla has a good introduction to the flexible boxes model.
There really isn't a sound, cross-browser way to do this in CSS. Assuming your layout has complexities, you need to use JavaScript to set the element's height. The essence of what you need to do is:
Element Height = Viewport height - element.offset.top - desired bottom margin
Once you can get this value and set the element's height, you need to attach event handlers to both the window onload and onresize so that you can fire your resize function.
Also, assuming your content could be larger than the viewport, you will need to set overflow-y to scroll.
The original post is more than 3 years ago. I guess many people who come to this post like me are looking for an app-like layout solution, say a somehow fixed header, footer, and full height content taking up the rest screen. If so, this post may help, it works on IE7+, etc.
http://blog.stevensanderson.com/2011/10/05/full-height-app-layouts-a-css-trick-to-make-it-easier/
And here are some snippets from that post:
#media screen {
/* start of screen rules. */
/* Generic pane rules */
body { margin: 0 }
.row, .col { overflow: hidden; position: absolute; }
.row { left: 0; right: 0; }
.col { top: 0; bottom: 0; }
.scroll-x { overflow-x: auto; }
.scroll-y { overflow-y: auto; }
.header.row { height: 75px; top: 0; }
.body.row { top: 75px; bottom: 50px; }
.footer.row { height: 50px; bottom: 0; }
/* end of screen rules. */
}
<div class="header row" style="background:yellow;">
<h2>My header</h2>
</div>
<div class="body row scroll-y" style="background:lightblue;">
<p>The body</p>
</div>
<div class="footer row" style="background:#e9e9e9;">
My footer
</div>
Instead of using tables in the markup, you could use CSS tables.
Markup
<body>
<div>hello </div>
<div>there</div>
</body>
(Relevant) CSS
body
{
display:table;
width:100%;
}
div
{
display:table-row;
}
div+ div
{
height:100%;
}
FIDDLE1 and FIDDLE2
Some advantages of this method are:
1) Less markup
2) Markup is more semantic than tables, because this is not tabular data.
3) Browser support is very good: IE8+, All modern browsers and mobile devices (caniuse)
Just for completeness, here are the equivalent Html elements to css properties for the The CSS table model
table { display: table }
tr { display: table-row }
thead { display: table-header-group }
tbody { display: table-row-group }
tfoot { display: table-footer-group }
col { display: table-column }
colgroup { display: table-column-group }
td, th { display: table-cell }
caption { display: table-caption }
CSS only Approach (If height is known/fixed)
When you want the middle element to span across entire page vertically, you can use calc() which is introduced in CSS3.
Assuming we have a fixed height header and footer elements and we want the section tag to take entire available vertical height...
Demo
Assumed markup and your CSS should be
html,
body {
height: 100%;
}
header {
height: 100px;
background: grey;
}
section {
height: calc(100% - (100px + 150px));
/* Adding 100px of header and 150px of footer */
background: tomato;
}
footer {
height: 150px;
background-color: blue;
}
<header>100px</header>
<section>Expand me for remaining space</section>
<footer>150px</footer>
So here, what am doing is, adding up the height of elements and than deducting from 100% using calc() function.
Just make sure that you use height: 100%; for the parent elements.
A simple solution, using flexbox:
html,
body {
height: 100%;
}
body {
display: flex;
flex-direction: column;
}
.content {
flex-grow: 1;
}
<body>
<div>header</div>
<div class="content"></div>
</body>
Codepen sample
An alternate solution, with a div centered within the content div
Used:
height: calc(100vh - 110px);
code:
.header { height: 60px; top: 0; background-color: green}
.body {
height: calc(100vh - 110px); /*50+60*/
background-color: gray;
}
.footer { height: 50px; bottom: 0; }
<div class="header">
<h2>My header</h2>
</div>
<div class="body">
<p>The body</p>
</div>
<div class="footer">
My footer
</div>
How about you simply use vh which stands for view height in CSS...
Look at the code snippet I created for you below and run it:
body {
padding: 0;
margin: 0;
}
.full-height {
width: 100px;
height: 100vh;
background: red;
}
<div class="full-height">
</div>
Also, look at the image below which I created for you:
None of the solutions posted work when you need the bottom div to scroll when the content is too tall. Here's a solution that works in that case:
.table {
display: table;
}
.table-row {
display: table-row;
}
.table-cell {
display: table-cell;
}
.container {
width: 400px;
height: 300px;
}
.header {
background: cyan;
}
.body {
background: yellow;
height: 100%;
}
.body-content-outer-wrapper {
height: 100%;
}
.body-content-inner-wrapper {
height: 100%;
position: relative;
overflow: auto;
}
.body-content {
position: absolute;
top: 0;
bottom: 0;
left: 0;
right: 0;
}
<div class="table container">
<div class="table-row header">
<div>This is the header whose height is unknown</div>
<div>This is the header whose height is unknown</div>
<div>This is the header whose height is unknown</div>
</div>
<div class="table-row body">
<div class="table-cell body-content-outer-wrapper">
<div class="body-content-inner-wrapper">
<div class="body-content">
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
<div>This is the scrollable content whose height is unknown</div>
</div>
</div>
</div>
</div>
</div>
Original source: Filling the Remaining Height of a Container While Handling Overflow in CSS
JSFiddle live preview
CSS3 Simple Way
height: calc(100% - 10px); // 10px is height of your first div...
all major browsers these days support it, so go ahead if you don't have requirement to support vintage browsers.
It could be done purely by CSS using vh:
#page {
display:block;
width:100%;
height:95vh !important;
overflow:hidden;
}
#tdcontent {
float:left;
width:100%;
display:block;
}
#content {
float:left;
width:100%;
height:100%;
display:block;
overflow:scroll;
}
and the HTML
<div id="page">
<div id="tdcontent"></div>
<div id="content"></div>
</div>
I checked it, It works in all major browsers: Chrome, IE, and FireFox
Disclaimer: The accepted answer gives the idea of the solution, but I'm finding it a bit bloated with an unnecessary wrapper and css rules. Below is a solution with very few css rules.
HTML 5
<body>
<header>Header with an arbitrary height</header>
<main>
This container will grow so as to take the remaining height
</main>
</body>
CSS
body {
display: flex;
flex-direction: column;
min-height: 100vh; /* body takes whole viewport's height */
}
main {
flex: 1; /* this will make the container take the free space */
}
Solution above uses viewport units and flexbox, and is therefore IE10+, providing you use the old syntax for IE10.
Codepen to play with: link to codepen
Or this one, for those needing the main container to be scrollable in case of overflowing content: link to codepen
I've been searching for an answer for this as well. If you are fortunate enough to be able to target IE8 and up, you can use display:table and related values to get the rendering rules of tables with block-level elements including div.
If you are even luckier and your users are using top-tier browsers (for example, if this is an intranet app on computers you control, like my latest project is), you can use the new Flexible Box Layout in CSS3!
What worked for me (with a div within another div and I assume in all other circumstances) is to set the bottom padding to 100%. That is, add this to your css / stylesheet:
padding-bottom: 100%;
In Bootstrap:
CSS Styles:
html, body {
height: 100%;
}
1) Just fill the height of the remaining screen space:
<body class="d-flex flex-column">
<div class="d-flex flex-column flex-grow-1">
<header>Header</header>
<div>Content</div>
<footer class="mt-auto">Footer</footer>
</div>
</body>
2) fill the height of the remaining screen space and aligning content to the middle of the parent element:
<body class="d-flex flex-column">
<div class="d-flex flex-column flex-grow-1">
<header>Header</header>
<div class="d-flex flex-column flex-grow-1 justify-content-center">Content</div>
<footer class="mt-auto">Footer</footer>
</div>
</body>
If you can deal with not supporting old browsers (that is, MSIE 9 or older), you can do this with Flexible Box Layout Module which is already W3C CR. That module allows other nice tricks, too, such as re-ordering content.
Unfortunately, MSIE 9 or lesser do not support this and you have to use vendor prefix for the CSS property for every browser other than Firefox. Hopefully other vendors drop the prefix soon, too.
An another choice would be CSS Grid Layout but that has even less support from stable versions of browsers. In practice, only MSIE 10 supports this.
Update year 2020: All modern browsers support both display: flex and display: grid. The only one missing is support for subgrid which in only supported by Firefox. Note that MSIE does not support either by the spec but if you're willing to add MSIE specific CSS hacks, it can be made to behave. I would suggest simply ignoring MSIE because even Microsoft says it should not be used anymore. Microsoft Edge supports these features just fine (except for subgrid support since is shares the Blink rendering engine with Chrome).
Example using display: grid:
html, body
{
min-height: 100vh;
padding: 0;
margin: 0;
}
body
{
display: grid;
grid:
"myheader" auto
"mymain" minmax(0,1fr)
"myfooter" auto /
minmax(10rem, 90rem);
}
header
{
grid-area: myheader;
background: yellow;
}
main
{
grid-area: mymain;
background: pink;
align-self: center
/* or stretch
+ display: flex;
+ flex-direction: column;
+ justify-content: center; */
}
footer
{
grid-area: myfooter;
background: cyan;
}
<header>Header content</header>
<main>Main content which should be centered and the content length may change.
<details><summary>Collapsible content</summary>
<p>Here's some text to cause more vertical space to be used.</p>
<p>Here's some text to cause more vertical space to be used (2).</p>
<p>Here's some text to cause more vertical space to be used (3).</p>
<p>Here's some text to cause more vertical space to be used (4).</p>
<p>Here's some text to cause more vertical space to be used (5).</p>
</details>
</main>
<footer>Footer content</footer>
Example using display: flex:
html, body
{
min-height: 100vh;
padding: 0;
margin: 0;
}
body
{
display: flex;
}
main
{
background: pink;
align-self: center;
}
<main>Main content which should be centered and the content length may change.
<details><summary>Collapsible content</summary>
<p>Here's some text to cause more vertical space to be used.</p>
<p>Here's some text to cause more vertical space to be used (2).</p>
<p>Here's some text to cause more vertical space to be used (3).</p>
<p>Here's some text to cause more vertical space to be used (4).</p>
<p>Here's some text to cause more vertical space to be used (5).</p>
</details>
</main>
There's a ton of answers now, but I found using height: 100vh; to work on the div element that needs to fill up the entire vertical space available.
In this way, I do not need to play around with display or positioning. This came in handy when using Bootstrap to make a dashboard wherein I had a sidebar and a main. I wanted the main to stretch and fill the entire vertical space so that I could apply a background colour.
div {
height: 100vh;
}
Supports IE9 and up: click to see the link
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Test</title>
<style type="text/css">
body
,html
{
height: 100%;
margin: 0;
padding: 0;
color: #FFF;
}
#header
{
float: left;
width: 100%;
background: red;
}
#content
{
height: 100%;
overflow: auto;
background: blue;
}
</style>
</head>
<body>
<div id="content">
<div id="header">
Header
<p>Header stuff</p>
</div>
Content
<p>Content stuff</p>
</div>
</body>
</html>
In all sane browsers, you can put the "header" div before the content, as a sibling, and the same CSS will work. However, IE7- does not interpret the height correctly if the float is 100% in that case, so the header needs to be IN the content, as above. The overflow: auto will cause double scroll bars on IE (which always has the viewport scrollbar visible, but disabled), but without it, the content will clip if it overflows.
CSS Grid Solution
Just defining the body with display:grid and the grid-template-rows using auto and the fr value property.
* {
margin: 0;
padding: 0;
}
html {
height: 100%;
}
body {
min-height: 100%;
display: grid;
grid-template-rows: auto 1fr auto;
}
header {
padding: 1em;
background: pink;
}
main {
padding: 1em;
background: lightblue;
}
footer {
padding: 2em;
background: lightgreen;
}
main:hover {
height: 2000px;
/* demos expansion of center element */
}
<header>HEADER</header>
<main>MAIN</main>
<footer>FOOTER</footer>
A Complete Guide to Grids # CSS-Tricks.com
This is my own minimal version of Pebbl's solution. Took forever to find the trick to get it to work in IE11. (Also tested in Chrome, Firefox, Edge, and Safari.)
html {
height: 100%;
}
body {
height: 100%;
margin: 0;
}
section {
display: flex;
flex-direction: column;
height: 100%;
}
div:first-child {
background: gold;
}
div:last-child {
background: plum;
flex-grow: 1;
}
<body>
<section>
<div>FIT</div>
<div>GROW</div>
</section>
</body>
I wresteled with this for a while and ended up with the following:
Since it is easy to make the content DIV the same height as the parent but apparently difficult to make it the parent height minus the header height I decided to make content div full height but position it absolutely in the top left corner and then define a padding for the top which has the height of the header. This way the content displays neatly under the header and fills the whole remaining space:
body {
padding: 0;
margin: 0;
height: 100%;
overflow: hidden;
}
#header {
position: absolute;
top: 0;
left: 0;
height: 50px;
}
#content {
position: absolute;
top: 0;
left: 0;
padding-top: 50px;
height: 100%;
}
Why not just like this?
html, body {
height: 100%;
}
#containerInput {
background-image: url('../img/edit_bg.jpg');
height: 40%;
}
#containerControl {
background-image: url('../img/control_bg.jpg');
height: 60%;
}
Giving you html and body (in that order) a height and then just give your elements a height?
Works for me
You can actually use display: table to split the area into two elements (header and content), where the header can vary in height and the content fills the remaining space. This works with the whole page, as well as when the area is simply the content of another element positioned with position set to relative, absolute or fixed. It will work as long as the parent element has a non-zero height.
See this fiddle and also the code below:
CSS:
body, html {
height: 100%;
margin: 0;
padding: 0;
}
p {
margin: 0;
padding: 0;
}
.additional-padding {
height: 50px;
background-color: #DE9;
}
.as-table {
display: table;
height: 100%;
width: 100%;
}
.as-table-row {
display: table-row;
height: 100%;
}
#content {
width: 100%;
height: 100%;
background-color: #33DD44;
}
HTML:
<div class="as-table">
<div id="header">
<p>This header can vary in height, it also doesn't have to be displayed as table-row. It will simply take the necessary space and the rest below will be taken by the second div which is displayed as table-row. Now adding some copy to artificially expand the header.</p>
<div class="additional-padding"></div>
</div>
<div class="as-table-row">
<div id="content">
<p>This is the actual content that takes the rest of the available space.</p>
</div>
</div>
</div>
style="height:100vh"
solved the problem for me. In my case I applied this to the required div
Vincent, I'll answer again using your new requirements. Since you don't care about the content being hidden if it's too long, you don't need to float the header. Just put overflow hidden on the html and body tags, and set #content height to 100%. The content will always be longer than the viewport by the height of the header, but it'll be hidden and won't cause scrollbars.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Test</title>
<style type="text/css">
body, html {
height: 100%;
margin: 0;
padding: 0;
overflow: hidden;
color: #FFF;
}
p {
margin: 0;
}
#header {
background: red;
}
#content {
position: relative;
height: 100%;
background: blue;
}
#content #positioned {
position: absolute;
top: 0;
right: 0;
}
</style>
</head>
<body>
<div id="header">
Header
<p>Header stuff</p>
</div>
<div id="content">
Content
<p>Content stuff</p>
<div id="positioned">Positioned Content</div>
</div>
</body>
</html>
For mobile app i use only VH and VW
<div class="container">
<div class="title">Title</div>
<div class="content">Content</div>
<div class="footer">Footer</div>
</div>
.container {
width: 100vw;
height: 100vh;
font-size: 5vh;
}
.title {
height: 20vh;
background-color: red;
}
.content {
height: 60vh;
background: blue;
}
.footer {
height: 20vh;
background: green;
}
Demo - https://jsfiddle.net/u763ck92/
Try this
var sizeFooter = function(){
$(".webfooter")
.css("padding-bottom", "0px")
.css("padding-bottom", $(window).height() - $("body").height())
}
$(window).resize(sizeFooter);
I had the same problem but I could not make work the solution with flexboxes above. So I created my own template, that includes:
a header with a fixed size element
a footer
a side bar with a scrollbar that occupies the remaining height
content
I used flexboxes but in a more simple way, using only properties display: flex and flex-direction: row|column:
I do use angular and I want my component sizes to be 100% of their parent element.
The key is to set the size (in percents) for all parents inorder to limit their size. In the following example myapp height has 100% of the viewport.
The main component has 90% of the viewport, because header and footer have 5%.
I posted my template here: https://jsfiddle.net/abreneliere/mrjh6y2e/3
body{
margin: 0;
color: white;
height: 100%;
}
div#myapp
{
display: flex;
flex-direction: column;
background-color: red; /* <-- painful color for your eyes ! */
height: 100%; /* <-- if you remove this line, myapp has no limited height */
}
div#main /* parent div for sidebar and content */
{
display: flex;
width: 100%;
height: 90%;
}
div#header {
background-color: #333;
height: 5%;
}
div#footer {
background-color: #222;
height: 5%;
}
div#sidebar {
background-color: #666;
width: 20%;
overflow-y: auto;
}
div#content {
background-color: #888;
width: 80%;
overflow-y: auto;
}
div.fized_size_element {
background-color: #AAA;
display: block;
width: 100px;
height: 50px;
margin: 5px;
}
Html:
<body>
<div id="myapp">
<div id="header">
HEADER
<div class="fized_size_element"></div>
</div>
<div id="main">
<div id="sidebar">
SIDEBAR
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
<div class="fized_size_element"></div>
</div>
<div id="content">
CONTENT
</div>
</div>
<div id="footer">
FOOTER
</div>
</div>
</body>
Spinning off the idea of Mr. Alien...
This seems a cleaner solution than the popular flex box one for CSS3 enabled browsers.
Simply use min-height(instead of height) with calc() to the content block.
The calc() starts with 100% and subtracts heights of headers and footers (need to include padding values)
Using "min-height" instead of "height" is particularly useful so it can work with javascript rendered content and JS frameworks like Angular2. Otherwise, the calculation will not push the footer to the bottom of the page once the javascript rendered content is visible.
Here is a simple example of a header and footer using 50px height and 20px padding for both.
Html:
<body>
<header></header>
<div class="content"></div>
<footer></footer>
</body>
Css:
.content {
min-height: calc(100% - (50px + 20px + 20px + 50px + 20px + 20px));
}
Of course, the math can be simplified but you get the idea...
I found a quite simple solution, because for me it was just a design issue.
I wanted the rest of the Page not to be white below the red footer.
So i set the pages background color to red. And the contents backgroundcolor to white.
With the contents height set to eg. 20em or 50% an almost empty page won't leave the whole page red.