I was using mysql 5.6.11,it usually turned down and show me this:
2005 - Unknown MySQL server host 'localhost'(11001).
Currently my resolution is to turn off the network,than it return to normal.I had searched a lot,but no answer is revalent to it.So,does anyone knows the reason?
ERROR 2005 (HY000): Unknown MySQL server host 'localhost' (0)
modify list of host names for your system:
C:\Windows\System32\drivers\etc\hosts
Make sure that you have the following entry:
127.0.0.1 localhost
In my case that entry was 0.0.0.0 localhost which caussed all problem
(you may need to change modify permission to modify this file)
This performs DNS resolution of host “localhost” to the IP address 127.0.0.1.
I have passed through that error today and did everything described above but didn't work for me. So I decided to view the core problem and logged onto the MySQL root folder in Windows 7 and did this solution:
Go to folder:
C:\AppServ\MySQL
Right click and Run as Administrator these files:
mysql_servicefix.bat
mysql_serviceinstall.bat
mysql_servicestart.bat
Then close the entire explorer window and reopen it or clear cache then login to phpMyAdmin again.
The case is like :
mysql connects will localhost when network is not up.
mysql cannot connect when network is up.
You can try the following steps to diagnose and resolve the issue (my guess is that some other service is blocking port on which mysql is hosted):
Disconnect the network.
Stop mysql service (if windows, try from services.msc window)
Connect to network.
Try to start the mysql and see if it starts correctly.
Check for system logs anyways to be sure that there is no error in starting mysql service.
If all goes well try connecting.
If fails, try to do a telnet localhost 3306 and see what output it shows.
Try changing the port on which mysql is hosted, default 3306, you can change to some other port which is ununsed.
This should ideally resolve the issue you are facing.
Follow these steps to fix this error
Use \connect root#127.0.0.1 instead of \connect root#localhost
if it doesn't work then go to C:\Windows\System32\drivers\etc\hosts and check the IP address attached to host name.
use that IP, so it will be.
\connect root#the_ip_address_you_found
Related
First of all I apologize for my English is not perfect.
I'm trying to connect to mysql database remotely.
I have already done the basic steps such as, for example, comment the bind address in my.cnf.
I gave permissions to the appropriate users in MySQL.
I tried with my friend to do it connect to the database, and it worked but we were in the same room with the same router.
Now I'm home and I tried to connect my friend, but I always get error:
ERROR 2003 (HY000): Can not connect to MySQL server ....
Maybe it's a problem of my home router? I can not even do the telnet.
P.S. I've also taken steps to set the firewall.
Some reasons for that,
mysqld is not running on the local host. Check your operating
system's process list to ensure the mysqld process is present.
You're running a MySQL server on Windows with many TCP/IP connections
to it. If you're experiencing that quite often your clients get that
error, you can find a workaround here: Section B.5.2.2.1, “Connection
to MySQL Server Failing on Windows”.
Check whether the server is running on that host by executing telnet
some_host 3306 and pressing the Enter key a couple of times. (3306 is
the default MySQL port number. Change the value if your server is
listening to a different port.) If there is a MySQL server running
and listening to the port, you should get a response that includes
the server's version number. If you get an error such as telnet:
Unable to connect to remote host: Connection refused, then there is
no server running on the given port.
Look at this mySQL full documentation, it will be helpful.
I has had two days searching and exploring solutions regarding the error 2003.
Can't connect to mysql server on 'Server name'.
The firewall is off and I had added the port 3306, the one that mysql uses.
Any recommendation?
Please refer this FAQ which describes how to solve this issue: http://faq.webyog.com/content/23/15/en/error-no-2003-can_t-connect.html
Error No. 2003: Can't connect to MySQL server on 'localhost' (or some other host)
simply means that connection is not possible for one of the following (or similar) reasons:
There is no MySQL server running at the specified host
Connection to the MySQL server is not allowed using TCP-IP. Check the 'skip-networking' setting in the MySQL configuration file (my.ini on Windows, my.cnf on Unix/Linux). It shall be commented out like '#skip-networking'. If it is not commented out, then do it and restart the MySQL server for the change to take effect. SQLyog needs to connect using TCP-IP.
Some networking issue prevents connection. It could be a network malconfiguration or a firewall issue.
When trying to connect to a MySQL server at an ISP this error message often indicates that direct connection to MySQL has been blocked. You must then use HTTP-tunneling or SSH-tunneling to connect.
It worked for me.controll pannel->administrative tools->services->mysql and start mysql.Some times simple solution saves lot of time.
normally means that there is no MySQL server running on the system .
check your server running
this could be due to firewalls of the system try below command and check
service iptables stop
i have the same issue but i fix it.
my hostname is DEBIAN, i just modify the file my.cnf ( for mysql) and set bindaddress : 0.0.0.0
this option say to mysql to listen all interfaces. restart your server and finish
if your question refer to can't connect to mysql on hosting (cpanel), i also had same problem.
I also turn off firewall, but it doesn't solve my problem.
Rather than using server name or domain name on Mysql Host Address, i using ip address given by hosting provider.
And it works.
Going to services and starting MYSQL service doesn't work for me.
Finally, I hit the following commands inside the MYSQL command-line client:
ALTER USER 'username'#'localhost' IDENTIFIED WITH mysql_native_password BY 'password';
There is a high chance that you are making one of the two mistakes.
First :
You are inputting the wrong password. check your password or change it with
this command
ALTER USER 'root'#'localhost' IDENTIFIED WITH mysql_native_password BY 'very_strong_password';
In place of 'very_strong_password' give a strong password of your choice.
Second:
You are using '#' in the password which can be confused with the other with #localhost.
The SQL Sever might not be installed.
Please refer this to install:
MySQL
The solution worked for me
Go to services and start MySql services
window: press the start button and search services. Then star MySql services
I got mysql database in the phpmyadmin, and i try to connect to the database from my application.
My connection string is:
Server=12.919.18.12;Port=3306;Database=hbd;Uid=hb;Pwd=123;
An exception occurs:
"Unable to connect to any of the specified MySQL hosts."
Do I need to install mysql or something?
(I just imported MySql.Data.dll and tryied it. Is there anything I have forgotten? I checked the ip pinging my website).
Connection strings for MySQL
is pretty helpful in terms of connection strings. Your connection
string seems to be invalid.
You may check mysql server is working or not and you can add port number of mysql in connection string like this
"Server=myServerAddress;Port=1234;Database=myDataBase;Uid=myUsername;Pwd=myPassword;"
Other reason MySql might be configured to listen to only the local host.
Follow the following links for more information:
Enabling MySQL Remote Access - MySQL connection only works from local machine
Unable to connect to any of the specified MySQL hosts.
IP is invalid 12.919.18.12
Server=12.919.18.12;Port=3306;Database=hbd;Uid=hb;Pwd=123;
IP block is < 256
If the datababase is local, try localhost or 127.0.0.1 as the IP address.
Is the server on your network? If so, the IP is invalid. If I were you, I'd try to check the IP with the person who gave it to you.
the connection string is correct but as ive read a lot of forums they all have the same problems as you do. my solution is that if your trying to create a network base system on a LAN type network you should use XAMPP or WAMPP but i prefer xampp and double check if your accounts or users have an Admin or any other user name for your connection and then see if they have granted all the privileges and with password of course.
Here is the ff instructions:
Open Xammp
Then open a web browser then open 127.0.0.1 or localhost.
click phpmyadmin then at the top click privileges.
add user and make it sure allow all privileges and check all access.
then connect again using the same connection string with the proper user and password.
This issue is RESOLVED :)
try to put the PORT in the end like :
"Server=12.919.18.12;Database=hbd;Uid=hb;Pwd=123;Port:3306;"
I am having window 7 as a operating system in the production machine where i am trying to use MySQL server 5.0 as a database. But i am unable to configure MySQL on my production machine. Following is the error i am receiving.
The security setting could not be applied to the database because the connection has failed with the following error:
Error no. 2003
Can't connect to MySQL server on localhost (10061).
The message also prompts that you need to open TCP 3306 port to resolve this issue, i checked it and found that TCP 3306 port is already opened and state is listening.
This is my 'netstat -an' command result -
Proto LocalAddress ForeignAddress State
TCP 0.0.0.0:3306 0.0.0.0:0 LISTENING
It means TCP at 3306 is open. Can anyone please tell me the solution of this problem. However i am able to install and configure the same MySQL Server setup in window xp. I tried google as well and found a lot of blogs but none is of use.
Thanks a lot.
Change
host: localhost
to
host: 127.0.0.1
This is likely caused by the way your database is being resolved.
have you checked whether the port 3036 is already in use by another application?
Have you checked whether a telnet hostname 3036 works on the local MySQL server and also on the remote machine?
First check in the system, MySQL services is in running condition or not.
look out on path of services go to right click on My Computer > manage > Services and Application > Services and check MySQL service status is started or not. Otherwise right click on service and start to service.
I hope this will help you.
I didn't find the MySQL services even after solving the problem.
I just run the mysqld as administrator and the problem is solved. So, simple but It took me 3 hours to find the solution.
The problem was rsolved.
The MySQL was not running in the Services section of Settings. Because XAMMP had disconnected the already running application in the background.
I recently installed MySQL 5 on Windows 2003 and tried configuring an instance. Everything worked fine until I got to "Applying Security settings", at which point it gave me the above error (Can't connect to MySQL server on 'localhost' (10061)).
I do have a port 3306 exception in my firewall for 'MySQL Server'.
Got this error on Windows because my mysqld.exe wasn't running.
Ran "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --install from the command line to add it to my services, ran services.msc (start -> run), found the MySQL service and started it.
Didn't have to worry about it from there on out.
To resolve this problem:
go to the task manager
select Services tab
find MySql service
Running
That's all.
You'll probably have to grant 'localhost' privileges to on the table to the user. See the 'GRANT' syntax documentation. Here's an example (from some C source).
"GRANT ALL PRIVILEGES ON %s.* TO '%s'#'localhost' IDENTIFIED BY '%s'";
That's the most common access problem with MySQL.
Other than that, you might check that the user you have defined to create your instance has full privileges, else the user cannot grant privileges.
Also, make sure the mysql service is started.
Make sure you don't have a third party firewall or Internet security service turned on.
Beyond that, there's several pages of the MySQL forum devoted to this:
http://forums.mysql.com/read.php?11,9293,9609#msg-9609
Try reading that.
I had difficulty accessing MySQL while connecting via a localhost connection on the standard port 3306, which worked fine when I installed and configured it for prior classes I had taken in MySQL and Java. I was getting errors like "error 2003" and "Cannot connect to MySql server on localhost (10061)". I tried connecting from both MySQL Workbench (5.2.35 CE) and Netbeans (7.2). I am using Windows 7 64 bit professional.
I tried typing in services.msc in the start menu search box, which opened the services dialog box to show all the services installed in windows. I scrolled down to MySQL and started this service. Subsequent attempts to connect to MySQL from MySQL WorkBench and from the command prompt succeeded.
English:
press Windows + R
write "services.msc". Then press Enter
search for MySQL57 and right click
click on start the service
Français :
Appuyez sur la touche Windows + R
Écrire "services.msc" Puis appuyez sur Entrée
Recherchez MySQL57 et clic droit
Cliquez sur rédémarrer
press Windows key + R
write "services.msc" enter
search for "MYSQL56"
write click on it and start the service
Make sure that your windows host file (located at c://windows/system32/drivers/etc.host) has following line. If not, add it at the end
127.0.0.1 localhost
::1 localhost
Sometimes mysql can not trigger Windows to force start host services if firewall blocks it, so start it manually
win+run>>services.msc, select the "MySQL_xx" where "xx" is the name you have assigned to MySQL host services during setup. Click on 'start' to start from hyperlink appeared on left side.
I tried Kuzhichamadam Inn's solution and found that a slight change needed to be made.
MYSQL57 was a network service. I had tried this repeatedly with no success. When I opened services.msc I found another service for localhost: MySQL. I started that one using the process below and it worked.
run > services.msc > rightclick MySQL > properties >start
I got this error when I ran out of space on my drive.
Go to Run type services.msc. Check whether or not MySQL services are running. If not, start it manually. Once it is started, type MySQL Show to test the service.
To connect locally to MySql, you do not have to setup a firewall with inbound rules. But, even if you already setup iptables to allow the TCP inbound port 3306 and grant the privilege to the user to access the db locally, you may have to setup the bind address in your my.cnf file, edit the default address there and put the server IP address that is running the MySql service.
Since I have struggled and found a slightly different answer here it is:
I recently switched the local (intranet) server at my new workplace. Installed a LAMP; Debian, Apache, MySql, PHP. The users at work connect the server by using the hostname, lets call it "intaserv". I set up everything, got it working but could not connect my MySql remotely whatever I did.
I found my answer after endless tries though. You can only have one bind-address and it cannot be hostname, in my case "intranet".
It has to be an IP-address in eg. "bind-address=192.168.0.50".
run > services.msc > rightclick MySQL57 > properties >set start type option to automatic
after restarting computer
At cmd
cd: C:\
C :\> cd "C:\Program Files\MySQL\MySQL Server 5.7\bin"
it will become
C:\Program Files\MySQL\MySQL Server 5.7\bin>
type mysql -u root -p
ie C:\Program Files\MySQL\MySQL Server 5.7\bin> mysql -u root -p
Enter password: ****
That's all
It will result in
mysql>
Another possibility:
There are two ways the MySQL client can connect to the server: over TCP/IP, or using sockets. It's possible you have your MySQL server configured to support socket connections, but not network connections.
Nothing to do just "Reset to Default" your firewall setting it will start working.
I read many solutions but nothing worked properly, so at last I reset firewall settings which worked.
finally solved this.. try running mysql in xammp. The check box of mysql in xammp should be unclicked. then start it. after that you can open now mysql and it will now connect to the localhost
Edit your 'my-default.ini' file (by default it comes with commented properties)as below ie.
basedir=D:/D_Drive/mysql-5.6.20-win32
datadir=D:/D_Drive/mysql-5.6.20-win32/data
port=8888
There is very good article present that dictates commands to create user, browse tables etc ie.
http://www.ntu.edu.sg/home/ehchua/programming/sql/MySQL_HowTo.html#zz-3.1
I did not have Mysql server installed, that package was missing and I got it from this link https://dev.mysql.com/downloads/installer/
Right click on My Computer
Click on Manage
Go to Services and Application
Select Services and find MySQL service
Right click on MySQL and select Start