I have installed Sonar 3.5.1 on a brand new PostgreSQL 9.2 database. The server seems to run fine, but sonar-runner (v2.2) fails with the following error:
Caused by: org.sonar.core.persistence.BadDatabaseVersion: The current batch process and the configured remote server do not share the same DB configuration.
- Batch side: jdbc:postgresql://10.1.0.210/sonar (postgres / *****)
- Server side: check the configuration at http://sonar.kopitoto/system
I am pretty confident that there is no other concurrent installation of Sonar pointing to the same database, because:
This is the first Sonar installation in this organization, ever
The value of sonar.core.id in the DB matches the value returned by the Sonar server:
Getting the value from the DB:
sonar=# SELECT text_value FROM properties WHERE prop_key = 'sonar.core.id';
text_value
----------------
20130525192736
(1 row)
Getting the value from the server:
$ curl http://sonar.kopitoto/api/server
<?xml version="1.0" encoding="UTF-8"?>
<server>
<id>20130525192736</id>
<version>3.5.1</version>
<status>UP</status>
</server>
Sonar-runner's properties:
sonar.host.url: http://sonar.kopitoto
sonar.jdbc.driverClassName: org.postgresql.Driver
sonar.jdbc.password: *****
sonar.jdbc.schema: public
sonar.jdbc.url: jdbc:postgresql://10.1.0.210/sonar
sonar.jdbc.username: postgres
Of course, the password is not five stars, but I checked it twice. If I change it a little bit, the runner fails earlier with authentication error. So a password mismatch is ruled out.
Server's sonar.properties:
sonar.jdbc.username: postgres
sonar.jdbc.password: *****
sonar.jdbc.url: jdbc:postgresql://10.1.0.210/sonar
sonar.jdbc.driverClassName: org.postgresql.Driver
sonar.jdbc.schema: public
Again, the password above is not five stars, but I am pretty sure it is correct. The server logs say nothing about errors, and shows how the database schema is initialized when I stop the thing, drop the database, create an empty one, and then start the Sonar server again.
Am I missing something?
At this point, I am thinking that this is a bug in Sonar (probably in sonar-runner). Unfortunately, Sonar's issue-tracking system is littered with such reports, all closed with "Not a bug" resolution. I guess I will be dismissed similarly if I reopen one of those issues.
So I hope I am really missing something here.
Related
I am trying to set up a brand new Ghost blog on a Centos 7 server. I have Nginx, Node and Ghost installed and have written all of the necessary configuration files. It's pretty close to working, but I wanted to use MySQL instead of SQLite, so I created a new (blank) MySQL database called "ghost_db", set up a MySQL user called "ghost", gave the user permission for the database, and added these lines to config.js:
database: {
client: 'mysql',
connection: {
host: 'localhost',
user: 'ghost',
password: 'mypassword',
database: 'ghost_db'
charset: 'utf8'
filename: path.join(__dirname, '/content/data/ghost-dev.db')
},
debug: false
}, ...
When I try to start it, I get an error that suggests I use knex-migrator to initialize the database.
[john#a ghost]$ npm start
> ghost#1.18.4 start /var/www/ghost
> node index
[2017-12-10 00:08:00] ERROR
NAME: DatabaseIsNotOkError
CODE: MIGRATION_TABLE_IS_MISSING
MESSAGE: Please run knex-migrator init ...
However, some comments on Stackexchange suggest that using knex-migrate may be unnecessary for this version of Ghost, and when I run knex-migrator, it also fails:
[john#a ghost]$ knex-migrator init
[2017-12-09 16:21:33] ERROR
NAME: RollbackError
CODE: SQLITE_ERROR
MESSAGE: delete from "migrations" where "name" = '2-create-fixtures.js' and "version" = 'init' and "currentVersion" = '1.18' - SQLITE_ERROR: no such table: migrations
...[omitted]
Error: SQLITE_ERROR: no such table: migrations
I think the problem may be that the "ghost_db" database I initially created is blank. The "ghost-dev.db" file that is pointed to in the config.js seems to be for SQLite, but I get the same error message if I switch config.js back to using an SQLite database. I don't know what the "migrations" table is. I found the schema that I think Ghost expects at [https://github.com/TryGhost/Ghost/blob/1.16.2/core/server/data/schema/schema.js], but I'm not sure how to use that to initialize the tables, etc., except for doing it very laboriously by hand. I'm stumped!
Knex-migrator is new in Ghost 1.0, which also uses a config.<env>.json file for configuration.
It sounds like you added your database config into a file called config.js which was correct <1.0, however it seems you were installing Ghost 1.0 and therefore your new connection details would have needed to live in config.production.json.
You are correct that Ghost-CLI isn't intended for use on CentOS (it's for Ubuntu), but I'd be very surprised if it failed to install Ghost correctly. The issues with other OSs are mainly in the subtle differences between systemd i.e. keeping Ghost running.
The answer for me was just to not create the database at all and let Ghost do it as part of ghost install.
I took an alternate approach which proved successful, which was to install Ghost as an NPM module. The official Ghost instructions label this as an "advanced" process, but it wasn't too difficult to follow the instructions in the excellent nehalist.io and Stickleback blogs. There was also some useful guidance on the HugeServer knowledgebase. I think ultimately the problem was that the Ghost commandline interface (ghost-cli) wasn't designed for Centos 7.
I'm having a problem in Production when accessing the JSON (let's call it mydata.json) where I store the data of my ruby webapp, deployed with Heroku. The way I access the download of this file is by putting into the browser:
my-heroku-page.herokuapp.com/mydata.json
but I get the HTTP 500 error page.
Always using the browser, when I try to create it I get the Ruby page:
We're sorry, but something went wrong.
If you are the application owner check the logs for more information.
First I must say I'm using the same source code I used for another webapp that is actually working, I just modified the database.yml according to my new host, database, username and password. The previous webapp was perfectly working, i.e I could create the table and access the data. Secondly the error doesn't occur with localhost.
I tried to create a Dataclip in Heroku:
Select * from mydata order by created_at desc;
but I get the error:
"Your query couldn't be created."
ERROR: relation "mydata" does not exist
LINE 3: FROM mydata
Plus when I check the heroku pg:info I get 0 Tables
=== DATABASE_URL
Plan: Hobby-dev
Status: Available
Connections: 0/20
PG Version: 9.5.5
Created: 2016-11-15 08:30 UTC
Data Size: 7.4 MB
Tables: 0
Rows: 0/10000 (In compliance)
Fork/Follow: Unsupported
Rollback: Unsupported
Add-on: postgresql-convex-54172
It seems like mydata.json is not created in production, but in localhost is working fine and I can create/download a blank one. I'm sure I'm missing something easy here, maybe in the database.yml.
I will edit the question if additional info are required. Any help is appreciated.
Thanks,
Simone
In moqui, I am trying to configure to use mysql, commented out derby and uncommented mysql in defaultconf, I copied the connector to framework lib, included the dependency in framework build.gradle, on running load, I get this error - java.lang.reflect.InvocationTargetExceptionjavax.management.InstanceAlreadyExistsException: bitronix.tm:type=JDBC,UniqueName=DEFAULT_transactional_DS,Id=0 -- thanks for any help
Can you post a snippet of code you have modified in MoquiDefaultConf.xml and build.graddle file.
A viable alternative to configure MySQL with Moqui is by doing related setting in configuration files (i.e. MoquiDevConf.xml for development instance, MoquiStagingConf.xml for staging instance and MoquiProductionConf.xml for production instance.). Follow the steps below to configure MySQL with Moqui.
Since, May be you are trying to do some development, you need to make changes in MoquiDevConf.xml file only.
Replace the <entity-facade> code in MoquiDevConf.xml with the following code.
<entity-facade crypt-pass="MoquiDefaultPassword:CHANGEME">
<datasource group-name="transactional" database-conf-name="mysql" schema-name="">
<inline-jdbc jdbc-uri="jdbc:mysql://127.0.0.1:3306/MoquiTransactional?autoReconnect=true&useUnicode=true&characterEncoding=UTF-8"
jdbc-username="MYSQL_USER_NAME" jdbc-password="MYSQL_PASSWORD" pool-minsize="2" pool-maxsize="50"/>
</datasource>
</entity-facade>
In the code above 'MoquiDEFAULT' is the name of database. Replace the MYSQL_USER_NAME and MYSQL_PASSWORD with your MySQL username and password.
Create a database in MySQL (as per the code above, create the database with name MoquiTransactional).
Add the jdbc driver for MySQL in the runtime/lib directory.
In MoquiInit.properties file, set MoquiDevConf.xml file path to "moqui.conf" property i.e. moqui.conf=conf/MoquiDevConf.xml
Now just simply build, load and run.
To answer your question for loading seed data,
you can simply the run the gradle command gradle load -Ptypes=seed, this only loads the seed type data.
Without more details my best guess is that you have another instance of Bitronix running on the machine, by the UniqueName almost certainly another instance of Moqui running. Make sure no other instance is running, killing background processes if there are any, before starting your new instance.
I recently uploaded a Symfony2 project to GoDaddy and I'm having trouble accesing it because I get the message:
An exception occured in driver: SQLSTATE[HY000] [1045] Access denied for user 'root'#'127.0.0.1' (using password: NO)
Obviously the message is clear, so I checked and rechecked my parameters.yml, and the message don't even match what I have there, which I have changed several times to try to fix. This is my parameters.yml:
parameters:
database_driver: pdo_mysql
database_host: localhost
database_port: null
database_name: database1
database_user: database1user
database_password: mytestpassword
mailer_transport: smtp
mailer_host: 127.0.0.1
mailer_user: null
mailer_password: null
locale: en
secret: RandomTokenThatWillBeChanged
debug_toolbar: true
debug_redirects: false
use_assetic_controller: true
So, the error message doesn't tell me what is my real problem, or it is loading the parameters from some cached version that I haven't found yet. Any ideas of what else could cause or where could a cached version of this data be?
One of the best practice when developing a Symfony application is to
make it configurable via a parameters.yml file. It contains
information such as the database name, the mailer hostname, and custom
configuration parameters.
As those parameters can be different on your local machine, your
testing environment, your production servers, and even between
developers working on the same project, it is not recommended to store
it in the project repository. Instead, the repository should contain a
paramaters.yml.dist file with sensible defaults that can be used as a
good starting point for everyone.
Then, whenever a developer starts working on the project, the
parameters`.yml file must be created by using the parameters.yml.dist
as a template. That works quite well, but whenever a new value is
added to the template, you must remember to update the main parameter
file accordingly.
As of Symfony 2.3, the Standard Edition comes with a new bundle that
automates the tedious work. Whenever you run composer install, a
script creates the parameters.yml file if it does not exist and allows
you to customize all the values interactively. Moreover, if you use
the --no-interaction flag, it will silently fallback to the default
values.
http://symfony.com/blog/new-in-symfony-2-3-interactive-management-of-the-parameters-yml-file
So, is it not possible that your paramaters.yml is overwritten by paramaters.yml.dist?
You can also try to completely clear the cache
In Dev:
php app/console cache:clear
In Production:
php app/console cache:clear --env=prod --no-debug
API Store is throwing errors when I try to create or edit an application
java.sql.SQLException: Can't call commit when autocommit=true
I've added the setting of
init-command='set autocommit=0'
to the my.cnf file
I've also added the flag:
?relaxAutoCommit=true
to the connection string but to no avail. I continue to get this error.
I am using the same mysql database for both the WSO2_CARBON_DB and teh WSO2AM_DB plus I have a single publisher node and two separate store nodes all pointing to the same mysql datasource.
I notice the application edit is saved (or the new application is created) but the exception is still thrown in the console and an error message appears in the user interface (as per the error at the top of this question).
Is there some other setting, within the WSO2 conf files that I have to tweak in order to get this to work properly?
Add both autoReconnect and relaxAutoCommit flags to the jdbc url of your defined "WSO2AM_DB" datasource in master-datasources.xml file. This will resolve your issue.
<configuration>
<url>jdbc:mysql://localhost:3306/AM_DB?autoReconnect=true&relaxAutoCommit=true</url>
<username>xxxx</username>
<;password>xxxxx</password>
EDIT: I updated the url to reflect the correct syntax for escaping the ampersand.
just for the sake of completeness, the JDBC URL shoud be
jdbc:mysql://localhost:3306/WSO2CARBON_DB?autoReconnect=true&relaxAutoCommit=true