MySQL can't use a user that I create

MySQL can't use a user that I create - mysql

In MySQL I create two users:
CREATE USER 'Bob'#'localhost' IDENTIFIED by 'p'
CREATE USER 'Alice'#'%' IDENTIFIED by 'a'
And then, when I try to connect with: "mysql -u Alice -p" it fails, telling me
Error 1045 (28000) Access denied for user 'Alice'#'localhost'
T
The same with Bob.
Anyone knows why occur this?
EDIT:
MySQL asks for the password, and the I putand give me that error.
EDIT 2: I am connecting in remote, not in local, so the only that must work is Alice.

Log in as root and do this:
GRANT ALL privileges ON *.* TO Bob#localhost IDENTIFIED BY 'p' WITH GRANT OPTION;

According to a comment in Using % for host when creating a MySQL user,
Actually there is, 'localhost' is special in mysql, it means a
connection over a unix socket (or named pipes on windows I believe) as
opposed to a TCP/IP socket. using % as the host does not include
'localhost' – nos May 30 '12 at 20:45
As a result, if your mysql -u alice... command connects using a Unix socket rather than at 127.0.0.1, you'll need to
CREATE USER 'Alice'#'localhost' IDENTIFIED by 'a'

did you tried flushing privileges with that command ?
FLUSH PRIVILEGES;

Related

can it be possible to connect mysql server on PC in LAN from PC outside of the LAN [duplicate]

This should be dead simple, but I cannot get it to work for the life of me.
I'm just trying to connect remotely to my MySQL server.
Connecting as:
mysql -u root -h localhost -p
works fine, but trying:
mysql -u root -h 'any ip address here' -p
fails with the error:
ERROR 1130 (00000): Host 'xxx.xx.xxx.xxx' is not allowed to connect to this MySQL server
In the mysql.user table, there is exactly the same entry for user 'root' with host 'localhost' as another with host '%'.
I'm at my wits' end and have no idea how to proceed.
Any ideas are welcome.

Possibly a security precaution. You could try adding a new administrator account:
mysql> CREATE USER 'monty'#'localhost' IDENTIFIED BY 'some_pass';
mysql> GRANT ALL PRIVILEGES ON *.* TO 'monty'#'localhost'
-> WITH GRANT OPTION;
mysql> CREATE USER 'monty'#'%' IDENTIFIED BY 'some_pass';
mysql> GRANT ALL PRIVILEGES ON *.* TO 'monty'#'%'
-> WITH GRANT OPTION;
Although as Pascal and others have noted it's not a great idea to have a user with this kind of access open to any IP. If you need an administrative user, use root, and leave it on localhost. For any other action specify exactly the privileges you need and limit the accessibility of the user as Pascal has suggest below.
Edit:
From the MySQL FAQ:
If you cannot figure out why you get
Access denied, remove from the user
table all entries that have Host
values containing wildcards (entries
that contain '%' or '_' characters). A
very common error is to insert a new
entry with Host='%' and
User='some_user', thinking that this
allows you to specify localhost to
connect from the same machine. The
reason that this does not work is that
the default privileges include an
entry with Host='localhost' and
User=''. Because that entry has a Host
value 'localhost' that is more
specific than '%', it is used in
preference to the new entry when
connecting from localhost! The correct
procedure is to insert a second entry
with Host='localhost' and
User='some_user', or to delete the
entry with Host='localhost' and
User=''. After deleting the entry,
remember to issue a FLUSH PRIVILEGES
statement to reload the grant tables.
See also Section 5.4.4, “Access
Control, Stage 1: Connection
Verification”.

One has to create a new MySQL User and assign privileges as below in Query prompt via phpMyAdmin or command prompt:
CREATE USER 'username'#'localhost' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'localhost' WITH GRANT OPTION;
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
Once done with all four queries, it should connect with username / password

My error message was similar and said 'Host XXX is not allowed to connect to this MySQL server' even though I was using root. Here's how to make sure that root has the correct permissions.
My setup:
Ubuntu 14.04 LTS
MySQL v5.5.37
Solution
Open up the file under etc/mysql/my.cnf
Check for:
port (by default this is port = 3306)
bind-address (by default this is bind-address = 127.0.0.1; if you want to open to all then just comment out this line. For my example, I'll say the actual server is on 10.1.1.7)
Now access the MySQL Database on your actual server (say your remote address is 123.123.123.123 at port 3306 as user root and I want to change permissions on database 'dataentry'. Remember to change the IP Address, Port, and database name to your settings)
mysql -u root -p
Enter password: <enter password>
mysql>GRANT ALL ON *.* to root#'123.123.123.123' IDENTIFIED BY 'put-your-password';
mysql>FLUSH PRIVILEGES;
mysql>exit
sudo service mysqld restart
You should now be able to remote connect to your database. For example, I'm using MySQL Workbench and putting in 'Hostname:10.1.1.7', 'Port:3306', 'Username:root'

Just perform the following steps:
Connect to MySQL (via localhost)
mysql -uroot -p
If the MySQL server is running in Kubernetes (K8s) and being accessed via a NodePort
kubectl exec -it [pod-name] -- /bin/bash
mysql -uroot -p
Create user
CREATE USER 'user'#'%' IDENTIFIED BY 'password';
Grant permissions
GRANT ALL PRIVILEGES ON *.* TO 'user'#'%' WITH GRANT OPTION;
Flush privileges
FLUSH PRIVILEGES;

You need to grant access to the user from any hostname.
This is how you add new privilege from phpmyadmin
Goto Privileges > Add a new User
Select Any Host for the desired username

Simple way:
Grant All Privileges ON *.* to 'USER_NAME'#'%' Identified By 'YOUR_PASSWORD';
then
FLUSH PRIVILEGES;
done!

The message *Host ''xxx.xx.xxx.xxx'' is not allowed to connect to this MySQL server is a reply from the MySQL server to the MySQL client. Notice how its returning the IP address and not the hostname.
If you're trying to connect with mysql -h<hostname> -u<somebody> -p and it returns this message with the IP address, then the MySQL server isn't able to do a reverse lookup on the client. This is critical because thats how it maps the MySQL client to the grants.
Make sure you can do an nslookup <mysqlclient> FROM the MySQL server. If that doesn't work, then there's no entry in the DNS server. Alternatively, you can put an entry in the MySQL server's HOSTS file (<ipaddress> <fullyqualifiedhostname> <hostname> <- The order here might matter).
An entry in my server's host file allowing a reverse lookup of the MySQL client solved this very problem.

This working for any future remote mysql connection !
sudo nano /etc/mysql/mysql.conf.d/mysqld.cnf
Navigate to the line that begins with the bind-address directive. It should look like this:
bind-address = 0.0.0.0
Login to your mysql as root terminal
mysql -u root -p
-- root password
CREATE USER 'username'#'localhost' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'localhost' WITH GRANT OPTION;
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
EXIT;
finally Grant that machine exclusive permission to connect to the database remotely with the following command.
sudo ufw allow from remote_IP_address to any port 3306

If you modify the grant tables manually (using INSERT, UPDATE, etc.), you should execute
a FLUSH PRIVILEGES statement to tell the server to reload the grant tables.
PS: I wouldn't recommend to allow any host to connect for any user (especially not the root use). If you are using mysql for a client/server application, prefer a subnet address. If you are using mysql with a web server or application server, use specific IPs.

Just use the interface provided by MySql's GUI Tool (SQLyog):
Click on User manager:
Now, if you want to grant access FOR ANY OTHER REMOTE PC, just make sure that, just like in the underneath picture, the Host field value is % (which is the wildcard)

Most of the answers here show you creating users with two host values: one for localhost, and one for %.
Please note that except for a built-in localhost user like root, you don't need to do this. If you simply want to make a new user that can log in from anywhere, you can use
CREATE USER 'myuser'#'%' IDENTIFIED BY 'mypassword';
GRANT <whatever privileges are appropriate> ON <relevant tables> TO myuser;
and it will work just fine. (As others have mentioned, it's a terrible idea to grant administrative privileges to a user from any domain.)

If you are using MySQL WorkBench, you can achieve this easily:
From the menu, select Server -> Users And Privileges
On the lower left, click on "Add account"
Fill the form with username, host matching (% means every host) and the password
Click on "Apply" on the lower right
After this you are good to go. Then, if you want to refine your configuration, you can use the "Administrative Roles" tab to set the command that can be used by the user (SELECT, ALTER etc etc) and the "Schema privileges" tab to restrict the user interaction to specific schemas.

Well, nothing of the above answer worked for me. After a lot of research, I found a solution. Though I may be late this may help others in future.
Login to your SQL server from a terminal
mysql -u root -p
-- root password
GRANT ALL ON *.* to root#'XX.XXX.XXX.XX' IDENTIFIED BY 'password';
This should solve the permission issue.
Happy coding!!

simple way is to login to phpmyadmin with root account , there goto mysql database and select user table , there edit root account and in host field add % wild card . and then through ssh flush privileges
FLUSH PRIVILEGES;

If this is a recent mysql install, then before changing anything else, try simply to execute this command and then try again:
flush privileges;
This alone fixes the issue for me on Ubuntu 16.04, mysql 5.7.20. YMMV.

Just find a better way to do that from your hosting control panel (I'm using DirectAdmin here)
simply go to the target server DB in your control panel, in my case:
MySQL management -> select your DB -> you will find: "Access Hosts", simply add your remote host here and its working now!
I guess there is a similar option on other C.panels like plesk, etc..
I'm hope it was helpful to you too.

If you happen to be running on Windows; A simple solution is to run the MySQL server instance configuration wizard. It is in your MYSQL group in the start menu. On the second from last screen click the box that says "allow root access from remote machines".

CREATE USER 'username'#'localhost' IDENTIFIED BY 'password';
FLUSH PRIVILEGES;
this error because no password to the root , and this Maybe occurred with you when you trying to connect from outside .

If you have WAMP Server + Windows 10 and you are using it for development than Right Click on Wamp Icon => Wamp Settings => Check Allow Virtual Hosts other than 127*

I was also facing same issue, It resolved in 2 min for me i just white list ip through cpanel
Suppose you are trying to connect database of server B from server A.
Go to Server B Cpanel->Remote MySQL-> enter Server A IP Address and That's it.

Well what you can do is just open mysql.cfg file and you have to change Bind-address to this
bind-address = 127.0.0.1
and then Restart mysql and you will able to connect that server to this.
Look this you can have idea form that.
this is real sol

This answer might help someone...
All these answers didnt help, then I realised I forgot to check one crucial thing.. The port :)
I have mysql running in a docker container running on a different port. I was pointing to my host machine on port 3306, which I have a mysql server running on. My container exposes the server on port 33060. So all this time, i was looking at the wrong server! doh!

This working for DirectAdmin;
Go to your DirectAdmin.
Go to your MySQL Management.
Select your database.
Under your Accesse Host tab, there is a field.
You should fill this field by xxx.xx.xxx.xx.
Click on Add Host.
Finished. Now you can access to this DB by your your_database_username & your_database_password.
So Simple!

CPANEL solution
Go to Cpanel, look for Remote MySQL.
Add the the IP in the input field:
Host (% wildcard is allowed)
Comment to remember what IP that is.
That was it for me.

1. From a terminal, connect you to your MySQL running container
docker exec -it your_container_name_or_id bash
2. In your container, connect you to the MySQL database
mysql -u your_user -p
enter your password to connect to database.
3. execute this SQL script to list all existing database users:
SELECT host, user FROM mysql.user;
The result will be some thing like below:
host
user
127.0.0.1
root
::1
root
localhost
mysql.sys
localhost
root
you should add a new row:
host
user
%
root
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%' WITH GRANT OPTION;

Some tips:
list privileges using show grants;
create a VPN and just add the ip of the tunnel

Problem: root#localhost is unable to connect to a fresh installation of mysql-community-server on openSUSE 42.2-1.150.x86_64.
Mysql refuses connections - period.
Solution:
$ ls -l /var/lib/mysql/mysql/user.*
-rw-rw---- 1 mysql mysql 0 Apr 29 19:44 /var/lib/mysql/mysql/user.MYD
-rw-rw---- 1 mysql mysql 1024 Apr 29 19:44 /var/lib/mysql/mysql/user.MYI
-rw-rw---- 1 mysql mysql 10684 Apr 29 19:44 /var/lib/mysql/mysql/user.frm
File user.MYD has 0 size (really ?!).
I copied all 3 files from another working system.
$ /usr/sbin/rcmysql stop
$ cd /var/lib/mysql/mysql/
$ scp root#othersytem:/var/lib/mysql/mysql/user.* ./
$ /usr/sbin/rcmysql start
$ cd -
$ mysql -u root -p
I was able to log in. Then, it was just a matter of re-applying all schema privileges.
Also, if you disabled IPv6, re-enable it temporary so that root#::1 account can also work.

if you are trying to execute mysql query withouth defining connectionstring, you will get this error.
Probably you forgat to define connection string before execution. have you check this out?
(sorry for bad english)

All of the answers here didn't work in my case so I guest this may help other users in the future. This can also be a problem in our code, not just in MySQL alone.
If you are using VB.NET
Instead of this code:
Dim server As String = My.Settings.DB_Server
Dim username As String = My.Settings.DB_Username
Dim password As String = My.Settings.DB_Password
Dim database As String = My.Settings.DB_Database
MysqlConn.ConnectionString = "server=" & server & ";" _
& "user id=" & username & ";" _
& "password=" & password & ";" _
& "database=" & database
MysqlConn = New MySqlConnection()
You need to move MysqlConn = New MySqlConnection() on the first line. So it would be like this
MysqlConn = New MySqlConnection()
Dim server As String = My.Settings.DB_Server
Dim username As String = My.Settings.DB_Username
Dim password As String = My.Settings.DB_Password
Dim database As String = My.Settings.DB_Database
MysqlConn.ConnectionString = "server=" & server & ";" _
& "user id=" & username & ";" _
& "password=" & password & ";" _
& "database=" & database

MariaDB create user using hostname [duplicate]

This should be dead simple, but I cannot get it to work for the life of me.
I'm just trying to connect remotely to my MySQL server.
Connecting as:
mysql -u root -h localhost -p
works fine, but trying:
mysql -u root -h 'any ip address here' -p
fails with the error:
ERROR 1130 (00000): Host 'xxx.xx.xxx.xxx' is not allowed to connect to this MySQL server
In the mysql.user table, there is exactly the same entry for user 'root' with host 'localhost' as another with host '%'.
I'm at my wits' end and have no idea how to proceed.
Any ideas are welcome.

One has to create a new MySQL User and assign privileges as below in Query prompt via phpMyAdmin or command prompt:
CREATE USER 'username'#'localhost' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'localhost' WITH GRANT OPTION;
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
Once done with all four queries, it should connect with username / password

My error message was similar and said 'Host XXX is not allowed to connect to this MySQL server' even though I was using root. Here's how to make sure that root has the correct permissions.
My setup:
Ubuntu 14.04 LTS
MySQL v5.5.37
Solution
Open up the file under etc/mysql/my.cnf
Check for:
port (by default this is port = 3306)
bind-address (by default this is bind-address = 127.0.0.1; if you want to open to all then just comment out this line. For my example, I'll say the actual server is on 10.1.1.7)
Now access the MySQL Database on your actual server (say your remote address is 123.123.123.123 at port 3306 as user root and I want to change permissions on database 'dataentry'. Remember to change the IP Address, Port, and database name to your settings)
mysql -u root -p
Enter password: <enter password>
mysql>GRANT ALL ON *.* to root#'123.123.123.123' IDENTIFIED BY 'put-your-password';
mysql>FLUSH PRIVILEGES;
mysql>exit
sudo service mysqld restart
You should now be able to remote connect to your database. For example, I'm using MySQL Workbench and putting in 'Hostname:10.1.1.7', 'Port:3306', 'Username:root'

Just perform the following steps:
Connect to MySQL (via localhost)
mysql -uroot -p
If the MySQL server is running in Kubernetes (K8s) and being accessed via a NodePort
kubectl exec -it [pod-name] -- /bin/bash
mysql -uroot -p
Create user
CREATE USER 'user'#'%' IDENTIFIED BY 'password';
Grant permissions
GRANT ALL PRIVILEGES ON *.* TO 'user'#'%' WITH GRANT OPTION;
Flush privileges
FLUSH PRIVILEGES;

You need to grant access to the user from any hostname.
This is how you add new privilege from phpmyadmin
Goto Privileges > Add a new User
Select Any Host for the desired username

Simple way:
Grant All Privileges ON *.* to 'USER_NAME'#'%' Identified By 'YOUR_PASSWORD';
then
FLUSH PRIVILEGES;
done!

The message *Host ''xxx.xx.xxx.xxx'' is not allowed to connect to this MySQL server is a reply from the MySQL server to the MySQL client. Notice how its returning the IP address and not the hostname.
If you're trying to connect with mysql -h<hostname> -u<somebody> -p and it returns this message with the IP address, then the MySQL server isn't able to do a reverse lookup on the client. This is critical because thats how it maps the MySQL client to the grants.
Make sure you can do an nslookup <mysqlclient> FROM the MySQL server. If that doesn't work, then there's no entry in the DNS server. Alternatively, you can put an entry in the MySQL server's HOSTS file (<ipaddress> <fullyqualifiedhostname> <hostname> <- The order here might matter).
An entry in my server's host file allowing a reverse lookup of the MySQL client solved this very problem.

This working for any future remote mysql connection !
sudo nano /etc/mysql/mysql.conf.d/mysqld.cnf
Navigate to the line that begins with the bind-address directive. It should look like this:
bind-address = 0.0.0.0
Login to your mysql as root terminal
mysql -u root -p
-- root password
CREATE USER 'username'#'localhost' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'localhost' WITH GRANT OPTION;
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
EXIT;
finally Grant that machine exclusive permission to connect to the database remotely with the following command.
sudo ufw allow from remote_IP_address to any port 3306

If you modify the grant tables manually (using INSERT, UPDATE, etc.), you should execute
a FLUSH PRIVILEGES statement to tell the server to reload the grant tables.
PS: I wouldn't recommend to allow any host to connect for any user (especially not the root use). If you are using mysql for a client/server application, prefer a subnet address. If you are using mysql with a web server or application server, use specific IPs.

Just use the interface provided by MySql's GUI Tool (SQLyog):
Click on User manager:
Now, if you want to grant access FOR ANY OTHER REMOTE PC, just make sure that, just like in the underneath picture, the Host field value is % (which is the wildcard)

Most of the answers here show you creating users with two host values: one for localhost, and one for %.
Please note that except for a built-in localhost user like root, you don't need to do this. If you simply want to make a new user that can log in from anywhere, you can use
CREATE USER 'myuser'#'%' IDENTIFIED BY 'mypassword';
GRANT <whatever privileges are appropriate> ON <relevant tables> TO myuser;
and it will work just fine. (As others have mentioned, it's a terrible idea to grant administrative privileges to a user from any domain.)

If you are using MySQL WorkBench, you can achieve this easily:
From the menu, select Server -> Users And Privileges
On the lower left, click on "Add account"
Fill the form with username, host matching (% means every host) and the password
Click on "Apply" on the lower right
After this you are good to go. Then, if you want to refine your configuration, you can use the "Administrative Roles" tab to set the command that can be used by the user (SELECT, ALTER etc etc) and the "Schema privileges" tab to restrict the user interaction to specific schemas.

Well, nothing of the above answer worked for me. After a lot of research, I found a solution. Though I may be late this may help others in future.
Login to your SQL server from a terminal
mysql -u root -p
-- root password
GRANT ALL ON *.* to root#'XX.XXX.XXX.XX' IDENTIFIED BY 'password';
This should solve the permission issue.
Happy coding!!

simple way is to login to phpmyadmin with root account , there goto mysql database and select user table , there edit root account and in host field add % wild card . and then through ssh flush privileges
FLUSH PRIVILEGES;

If this is a recent mysql install, then before changing anything else, try simply to execute this command and then try again:
flush privileges;
This alone fixes the issue for me on Ubuntu 16.04, mysql 5.7.20. YMMV.

Just find a better way to do that from your hosting control panel (I'm using DirectAdmin here)
simply go to the target server DB in your control panel, in my case:
MySQL management -> select your DB -> you will find: "Access Hosts", simply add your remote host here and its working now!
I guess there is a similar option on other C.panels like plesk, etc..
I'm hope it was helpful to you too.

If you happen to be running on Windows; A simple solution is to run the MySQL server instance configuration wizard. It is in your MYSQL group in the start menu. On the second from last screen click the box that says "allow root access from remote machines".

CREATE USER 'username'#'localhost' IDENTIFIED BY 'password';
FLUSH PRIVILEGES;
this error because no password to the root , and this Maybe occurred with you when you trying to connect from outside .

If you have WAMP Server + Windows 10 and you are using it for development than Right Click on Wamp Icon => Wamp Settings => Check Allow Virtual Hosts other than 127*

I was also facing same issue, It resolved in 2 min for me i just white list ip through cpanel
Suppose you are trying to connect database of server B from server A.
Go to Server B Cpanel->Remote MySQL-> enter Server A IP Address and That's it.

Well what you can do is just open mysql.cfg file and you have to change Bind-address to this
bind-address = 127.0.0.1
and then Restart mysql and you will able to connect that server to this.
Look this you can have idea form that.
this is real sol

This answer might help someone...
All these answers didnt help, then I realised I forgot to check one crucial thing.. The port :)
I have mysql running in a docker container running on a different port. I was pointing to my host machine on port 3306, which I have a mysql server running on. My container exposes the server on port 33060. So all this time, i was looking at the wrong server! doh!

This working for DirectAdmin;
Go to your DirectAdmin.
Go to your MySQL Management.
Select your database.
Under your Accesse Host tab, there is a field.
You should fill this field by xxx.xx.xxx.xx.
Click on Add Host.
Finished. Now you can access to this DB by your your_database_username & your_database_password.
So Simple!

CPANEL solution
Go to Cpanel, look for Remote MySQL.
Add the the IP in the input field:
Host (% wildcard is allowed)
Comment to remember what IP that is.
That was it for me.

1. From a terminal, connect you to your MySQL running container
docker exec -it your_container_name_or_id bash
2. In your container, connect you to the MySQL database
mysql -u your_user -p
enter your password to connect to database.
3. execute this SQL script to list all existing database users:
SELECT host, user FROM mysql.user;
The result will be some thing like below:
host
user
127.0.0.1
root
::1
root
localhost
mysql.sys
localhost
root
you should add a new row:
host
user
%
root
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%' WITH GRANT OPTION;

Some tips:
list privileges using show grants;
create a VPN and just add the ip of the tunnel

Problem: root#localhost is unable to connect to a fresh installation of mysql-community-server on openSUSE 42.2-1.150.x86_64.
Mysql refuses connections - period.
Solution:
$ ls -l /var/lib/mysql/mysql/user.*
-rw-rw---- 1 mysql mysql 0 Apr 29 19:44 /var/lib/mysql/mysql/user.MYD
-rw-rw---- 1 mysql mysql 1024 Apr 29 19:44 /var/lib/mysql/mysql/user.MYI
-rw-rw---- 1 mysql mysql 10684 Apr 29 19:44 /var/lib/mysql/mysql/user.frm
File user.MYD has 0 size (really ?!).
I copied all 3 files from another working system.
$ /usr/sbin/rcmysql stop
$ cd /var/lib/mysql/mysql/
$ scp root#othersytem:/var/lib/mysql/mysql/user.* ./
$ /usr/sbin/rcmysql start
$ cd -
$ mysql -u root -p
I was able to log in. Then, it was just a matter of re-applying all schema privileges.
Also, if you disabled IPv6, re-enable it temporary so that root#::1 account can also work.

if you are trying to execute mysql query withouth defining connectionstring, you will get this error.
Probably you forgat to define connection string before execution. have you check this out?
(sorry for bad english)

All of the answers here didn't work in my case so I guest this may help other users in the future. This can also be a problem in our code, not just in MySQL alone.
If you are using VB.NET
Instead of this code:
Dim server As String = My.Settings.DB_Server
Dim username As String = My.Settings.DB_Username
Dim password As String = My.Settings.DB_Password
Dim database As String = My.Settings.DB_Database
MysqlConn.ConnectionString = "server=" & server & ";" _
& "user id=" & username & ";" _
& "password=" & password & ";" _
& "database=" & database
MysqlConn = New MySqlConnection()
You need to move MysqlConn = New MySqlConnection() on the first line. So it would be like this
MysqlConn = New MySqlConnection()
Dim server As String = My.Settings.DB_Server
Dim username As String = My.Settings.DB_Username
Dim password As String = My.Settings.DB_Password
Dim database As String = My.Settings.DB_Database
MysqlConn.ConnectionString = "server=" & server & ";" _
& "user id=" & username & ";" _
& "password=" & password & ";" _
& "database=" & database

Can't connect to phpmyadmin (HY000/1130): Host 'localhost' is not allowed to connect to this MariaDB server [duplicate]

This should be dead simple, but I cannot get it to work for the life of me.
I'm just trying to connect remotely to my MySQL server.
Connecting as:
mysql -u root -h localhost -p
works fine, but trying:
mysql -u root -h 'any ip address here' -p
fails with the error:
ERROR 1130 (00000): Host 'xxx.xx.xxx.xxx' is not allowed to connect to this MySQL server
In the mysql.user table, there is exactly the same entry for user 'root' with host 'localhost' as another with host '%'.
I'm at my wits' end and have no idea how to proceed.
Any ideas are welcome.

One has to create a new MySQL User and assign privileges as below in Query prompt via phpMyAdmin or command prompt:
CREATE USER 'username'#'localhost' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'localhost' WITH GRANT OPTION;
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
Once done with all four queries, it should connect with username / password

My error message was similar and said 'Host XXX is not allowed to connect to this MySQL server' even though I was using root. Here's how to make sure that root has the correct permissions.
My setup:
Ubuntu 14.04 LTS
MySQL v5.5.37
Solution
Open up the file under etc/mysql/my.cnf
Check for:
port (by default this is port = 3306)
bind-address (by default this is bind-address = 127.0.0.1; if you want to open to all then just comment out this line. For my example, I'll say the actual server is on 10.1.1.7)
Now access the MySQL Database on your actual server (say your remote address is 123.123.123.123 at port 3306 as user root and I want to change permissions on database 'dataentry'. Remember to change the IP Address, Port, and database name to your settings)
mysql -u root -p
Enter password: <enter password>
mysql>GRANT ALL ON *.* to root#'123.123.123.123' IDENTIFIED BY 'put-your-password';
mysql>FLUSH PRIVILEGES;
mysql>exit
sudo service mysqld restart
You should now be able to remote connect to your database. For example, I'm using MySQL Workbench and putting in 'Hostname:10.1.1.7', 'Port:3306', 'Username:root'

Just perform the following steps:
Connect to MySQL (via localhost)
mysql -uroot -p
If the MySQL server is running in Kubernetes (K8s) and being accessed via a NodePort
kubectl exec -it [pod-name] -- /bin/bash
mysql -uroot -p
Create user
CREATE USER 'user'#'%' IDENTIFIED BY 'password';
Grant permissions
GRANT ALL PRIVILEGES ON *.* TO 'user'#'%' WITH GRANT OPTION;
Flush privileges
FLUSH PRIVILEGES;

You need to grant access to the user from any hostname.
This is how you add new privilege from phpmyadmin
Goto Privileges > Add a new User
Select Any Host for the desired username

Simple way:
Grant All Privileges ON *.* to 'USER_NAME'#'%' Identified By 'YOUR_PASSWORD';
then
FLUSH PRIVILEGES;
done!

The message *Host ''xxx.xx.xxx.xxx'' is not allowed to connect to this MySQL server is a reply from the MySQL server to the MySQL client. Notice how its returning the IP address and not the hostname.
If you're trying to connect with mysql -h<hostname> -u<somebody> -p and it returns this message with the IP address, then the MySQL server isn't able to do a reverse lookup on the client. This is critical because thats how it maps the MySQL client to the grants.
Make sure you can do an nslookup <mysqlclient> FROM the MySQL server. If that doesn't work, then there's no entry in the DNS server. Alternatively, you can put an entry in the MySQL server's HOSTS file (<ipaddress> <fullyqualifiedhostname> <hostname> <- The order here might matter).
An entry in my server's host file allowing a reverse lookup of the MySQL client solved this very problem.

This working for any future remote mysql connection !
sudo nano /etc/mysql/mysql.conf.d/mysqld.cnf
Navigate to the line that begins with the bind-address directive. It should look like this:
bind-address = 0.0.0.0
Login to your mysql as root terminal
mysql -u root -p
-- root password
CREATE USER 'username'#'localhost' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'localhost' WITH GRANT OPTION;
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
EXIT;
finally Grant that machine exclusive permission to connect to the database remotely with the following command.
sudo ufw allow from remote_IP_address to any port 3306

If you modify the grant tables manually (using INSERT, UPDATE, etc.), you should execute
a FLUSH PRIVILEGES statement to tell the server to reload the grant tables.
PS: I wouldn't recommend to allow any host to connect for any user (especially not the root use). If you are using mysql for a client/server application, prefer a subnet address. If you are using mysql with a web server or application server, use specific IPs.

Just use the interface provided by MySql's GUI Tool (SQLyog):
Click on User manager:
Now, if you want to grant access FOR ANY OTHER REMOTE PC, just make sure that, just like in the underneath picture, the Host field value is % (which is the wildcard)

Most of the answers here show you creating users with two host values: one for localhost, and one for %.
Please note that except for a built-in localhost user like root, you don't need to do this. If you simply want to make a new user that can log in from anywhere, you can use
CREATE USER 'myuser'#'%' IDENTIFIED BY 'mypassword';
GRANT <whatever privileges are appropriate> ON <relevant tables> TO myuser;
and it will work just fine. (As others have mentioned, it's a terrible idea to grant administrative privileges to a user from any domain.)

If you are using MySQL WorkBench, you can achieve this easily:
From the menu, select Server -> Users And Privileges
On the lower left, click on "Add account"
Fill the form with username, host matching (% means every host) and the password
Click on "Apply" on the lower right
After this you are good to go. Then, if you want to refine your configuration, you can use the "Administrative Roles" tab to set the command that can be used by the user (SELECT, ALTER etc etc) and the "Schema privileges" tab to restrict the user interaction to specific schemas.

Well, nothing of the above answer worked for me. After a lot of research, I found a solution. Though I may be late this may help others in future.
Login to your SQL server from a terminal
mysql -u root -p
-- root password
GRANT ALL ON *.* to root#'XX.XXX.XXX.XX' IDENTIFIED BY 'password';
This should solve the permission issue.
Happy coding!!

simple way is to login to phpmyadmin with root account , there goto mysql database and select user table , there edit root account and in host field add % wild card . and then through ssh flush privileges
FLUSH PRIVILEGES;

If this is a recent mysql install, then before changing anything else, try simply to execute this command and then try again:
flush privileges;
This alone fixes the issue for me on Ubuntu 16.04, mysql 5.7.20. YMMV.

Just find a better way to do that from your hosting control panel (I'm using DirectAdmin here)
simply go to the target server DB in your control panel, in my case:
MySQL management -> select your DB -> you will find: "Access Hosts", simply add your remote host here and its working now!
I guess there is a similar option on other C.panels like plesk, etc..
I'm hope it was helpful to you too.

If you happen to be running on Windows; A simple solution is to run the MySQL server instance configuration wizard. It is in your MYSQL group in the start menu. On the second from last screen click the box that says "allow root access from remote machines".

CREATE USER 'username'#'localhost' IDENTIFIED BY 'password';
FLUSH PRIVILEGES;
this error because no password to the root , and this Maybe occurred with you when you trying to connect from outside .

If you have WAMP Server + Windows 10 and you are using it for development than Right Click on Wamp Icon => Wamp Settings => Check Allow Virtual Hosts other than 127*

I was also facing same issue, It resolved in 2 min for me i just white list ip through cpanel
Suppose you are trying to connect database of server B from server A.
Go to Server B Cpanel->Remote MySQL-> enter Server A IP Address and That's it.

Well what you can do is just open mysql.cfg file and you have to change Bind-address to this
bind-address = 127.0.0.1
and then Restart mysql and you will able to connect that server to this.
Look this you can have idea form that.
this is real sol

This answer might help someone...
All these answers didnt help, then I realised I forgot to check one crucial thing.. The port :)
I have mysql running in a docker container running on a different port. I was pointing to my host machine on port 3306, which I have a mysql server running on. My container exposes the server on port 33060. So all this time, i was looking at the wrong server! doh!

This working for DirectAdmin;
Go to your DirectAdmin.
Go to your MySQL Management.
Select your database.
Under your Accesse Host tab, there is a field.
You should fill this field by xxx.xx.xxx.xx.
Click on Add Host.
Finished. Now you can access to this DB by your your_database_username & your_database_password.
So Simple!

CPANEL solution
Go to Cpanel, look for Remote MySQL.
Add the the IP in the input field:
Host (% wildcard is allowed)
Comment to remember what IP that is.
That was it for me.

1. From a terminal, connect you to your MySQL running container
docker exec -it your_container_name_or_id bash
2. In your container, connect you to the MySQL database
mysql -u your_user -p
enter your password to connect to database.
3. execute this SQL script to list all existing database users:
SELECT host, user FROM mysql.user;
The result will be some thing like below:
host
user
127.0.0.1
root
::1
root
localhost
mysql.sys
localhost
root
you should add a new row:
host
user
%
root
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%' WITH GRANT OPTION;

Some tips:
list privileges using show grants;
create a VPN and just add the ip of the tunnel

Problem: root#localhost is unable to connect to a fresh installation of mysql-community-server on openSUSE 42.2-1.150.x86_64.
Mysql refuses connections - period.
Solution:
$ ls -l /var/lib/mysql/mysql/user.*
-rw-rw---- 1 mysql mysql 0 Apr 29 19:44 /var/lib/mysql/mysql/user.MYD
-rw-rw---- 1 mysql mysql 1024 Apr 29 19:44 /var/lib/mysql/mysql/user.MYI
-rw-rw---- 1 mysql mysql 10684 Apr 29 19:44 /var/lib/mysql/mysql/user.frm
File user.MYD has 0 size (really ?!).
I copied all 3 files from another working system.
$ /usr/sbin/rcmysql stop
$ cd /var/lib/mysql/mysql/
$ scp root#othersytem:/var/lib/mysql/mysql/user.* ./
$ /usr/sbin/rcmysql start
$ cd -
$ mysql -u root -p
I was able to log in. Then, it was just a matter of re-applying all schema privileges.
Also, if you disabled IPv6, re-enable it temporary so that root#::1 account can also work.

if you are trying to execute mysql query withouth defining connectionstring, you will get this error.
Probably you forgat to define connection string before execution. have you check this out?
(sorry for bad english)

All of the answers here didn't work in my case so I guest this may help other users in the future. This can also be a problem in our code, not just in MySQL alone.
If you are using VB.NET
Instead of this code:
Dim server As String = My.Settings.DB_Server
Dim username As String = My.Settings.DB_Username
Dim password As String = My.Settings.DB_Password
Dim database As String = My.Settings.DB_Database
MysqlConn.ConnectionString = "server=" & server & ";" _
& "user id=" & username & ";" _
& "password=" & password & ";" _
& "database=" & database
MysqlConn = New MySqlConnection()
You need to move MysqlConn = New MySqlConnection() on the first line. So it would be like this
MysqlConn = New MySqlConnection()
Dim server As String = My.Settings.DB_Server
Dim username As String = My.Settings.DB_Username
Dim password As String = My.Settings.DB_Password
Dim database As String = My.Settings.DB_Database
MysqlConn.ConnectionString = "server=" & server & ";" _
& "user id=" & username & ";" _
& "password=" & password & ";" _
& "database=" & database

MySQL Error #1133 - Can't find any matching row in the user table

Unable to set password for a user using 3.5.2.2 - phpMyAdmin for 5.5.27 - MySQL. When trying to set the password while logged onto phpMyAdmin as the user, it pops up the following error:
#1133 - Can't find any matching row in the user table
When logged on as root, following password set successfully message pops up.
SET PASSWORD FOR 'user'#'%' = PASSWORD( '***' )
In either case, password does not set and stays as it currently is, blank.

I encountered this error using MySQL in a different context (not within phpMyAdmin). GRANT and SET PASSWORD commands failed on a particular existing user, who was listed in the mysql.user table. In my case, it was fixed by running
FLUSH PRIVILEGES;
The documentation for this command says
Reloads the privileges from the grant tables in the mysql database.
The server caches information in memory as a result of GRANT and CREATE USER statements.
This memory is not released by the corresponding REVOKE and DROP USER statements, so for
a server that executes many instances of the statements that cause caching, there will be
an increase in memory use. This cached memory can be freed with FLUSH PRIVILEGES.
Apparently the user table cache had reached an inconsistent state, causing this weird error message. More information is available here.

This error can occur if trying to grant privileges for a non-existing user.
It is not clear to me what MySQL considers a non-existing user. But I suspect MySQL considers a user to exist if it can be found by a name (column User) and a host (column Host) in the user table.
If trying to grant privileges to a user that can be found with his name (column User) but not by his name and host (columns User and Host), and not provide a password, then the error occurs.
For example, the following statement triggers the error:
grant all privileges on mydb.* to myuser#'xxx.xxx.xxx.xxx';
This is because, with no password being specified, MySQL cannot create a new user, and thus tries to find an existing user. But no user with the name myuser and the host xxx.xxx.xxx.xxx can be found in the user table.
Whereas providing a password, allows the statement to be executed successfully:
grant all privileges on mydb.* to myuser#'xxx.xxx.xxx.xxx' identified by 'mypassword';
Make sure to reuse the same password of that user you consider exists, if that new "MySQL user" is the same "application user".
Complete the operation by flushing the privileges:
flush privileges;

I encountered this issue, but in my case the password for the 'phpmyadmin' user did not match the contents of /etc/phpmyadmin/config-db.php
Once I updated the password for the 'phpmyadmin' user the error went away.
These are the steps I took:
Log in to mysql as root: mysql -uroot -pYOUR_ROOT_PASS
Change to the 'mysql' db: use mysql;
Update the password for the 'phpmyadmin' user:
UPDATE mysql.user SET Password=PASSWORD('YOUR_PASS_HERE') WHERE User='phpmyadmin' AND Host='localhost';
Flush privileges: FLUSH PRIVILEGES;
DONE!! It worked for me.

It turns out, the error is very vague indeed!
1) Password was setting while logged on as root, as it was updating the user/password field in the users table under MySql.
2) When logged on as user, password was in fact not changing and even though there was one specified in the users table in MySql, config.inc.php file allowed authentication without password.
Solution:
Change following value to false in the config.inc.php.
$cfg['Servers'][$i]['AllowNoPassword'] = true;
So that it reads
$cfg['Servers'][$i]['AllowNoPassword'] = false;
Change user's host from Any or % to localhost in MySql users table. This could easily be achieved via phpMyAdmin console.
These two changes allowed me to authenticate as user with it's password and disallowed authentication without password.
It also allowed user to change its password while logged on as user.
Seems all permissions and the rest was fixed with these two changes.

To expound on Stephane's answer.
I got this error when I tried to grant remote connections privileges of a particular database to a root user on MySQL server by running the command:
USE database_name;
GRANT ALL PRIVILEGES ON *.* TO 'root'#'%';
This gave an error:
ERROR 1133 (42000): Can't find any matching row in the user table
Here's how I fixed it:
First, confirm that your MySQL server allows for remote connections. Use your preferred text editor to open the MySQL server configuration file:
sudo nano /etc/mysql/mysql.conf.d/mysqld.cnf
Scroll down to the bind-address line and ensure that is either commented out or replaced with 0.0.0.0 (to allow all remote connections) or replaced with Ip-Addresses that you want remote connections from.
Once you make the necessary changes, save and exit the configuration file. Apply the changes made to the MySQL config file by restarting the MySQL service:
sudo systemctl restart mysql
Next, log into the MySQL server console on the server it was installed:
mysql -u root -p
Enter your mysql user password
Check the hosts that the user you want has access to already. In my case the user is root:
SELECT host FROM mysql.user WHERE user = "root";
This gave me this output:
+-----------+
| host |
+-----------+
| localhost |
+-----------+
Next, I ran the command below which is similar to the previous one that was throwing errors, but notice that I added a password to it this time:
USE database_name;
GRANT ALL PRIVILEGES ON *.* TO 'root'#'%' IDENTIFIED BY 'my-password';
Note: % grants a user remote access from all hosts on a network. You can specify the Ip-Address of the individual hosts that you want to grant the user access from using the command - GRANT ALL PRIVILEGES ON *.* TO 'root'#'Ip-Address' IDENTIFIED BY 'my-password';
Afterwhich I checked the hosts that the user now has access to. In my case the user is root:
SELECT host FROM mysql.user WHERE user = "root";
This gave me this output:
+-----------+
| host |
+-----------+
| % |
| localhost |
+-----------+
Finally, you can try connecting to the MySQL server from another server using the command:
mysql -u username -h mysql-server-ip-address -p
Where u represents user, h represents mysql-server-ip-address and p represents password. So in my case it was:
mysql -u root -h 34.69.261.158 -p
Enter your mysql user password
You should get this output depending on your MySQL server version:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 4
Server version: 5.7.31 MySQL Community Server (GPL)
Copyright (c) 2000, 2020, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql>
Resources: How to Allow Remote Connections to MySQL
That's all.
I hope this helps

grant all on newdb.* to newuser#localhost identified by 'password';

For someone who is doing a mistake like me.
I was using command
SET PASSWORD FOR root = 'elephant7'
to update the password for the root user and I was getting the same error. I tried every thing mention above in all the answer but I got no success then after searching a bit I found out the ans,
MySQL account names consist of a user name and a host name. This enables creation of accounts for users with the same name who can connect from different hosts.
on https://dba.stackexchange.com/
and then I used the command
SET PASSWORD FOR 'root'#'localhost'=PASSWORD('mynewpasword');
here 'root'#'localhost' did the trick and the command worked.
Hope this be beneficial for someone.

If you're using PHPMyAdmin you have to be logged in as root to be able to change root password. in user put root than leave password blank than change your password.

In my case I had just renamed the Mysql user which was going to change his password on a gui based db tool (DbVisualizer). The terminal in which I tried to 'SET PASSWORD' did not work(MySQL Error #1133).
However this answer worked for me, even after changing the password the 'SET PASSWORD' command did not work yet.
After closing the terminal and opening new one the command worked very well.

I think the answer is here now : https://bugs.mysql.com/bug.php?id=83822
So, you should write :
GRANT ALL PRIVILEGES ON mydb.* to myuser#'xxx.xxx.xxx.xxx' IDENTIFIED BY 'mypassword';
And i think that could be work :
SET PASSWORD FOR myuser#'xxx.xxx.xxx.xxx' IDENTIFIED BY 'old_password' = PASSWORD('new_password');

Host 'xxx.xx.xxx.xxx' is not allowed to connect to this MySQL server

This should be dead simple, but I cannot get it to work for the life of me.
I'm just trying to connect remotely to my MySQL server.
Connecting as:
mysql -u root -h localhost -p
works fine, but trying:
mysql -u root -h 'any ip address here' -p
fails with the error:
ERROR 1130 (00000): Host 'xxx.xx.xxx.xxx' is not allowed to connect to this MySQL server
In the mysql.user table, there is exactly the same entry for user 'root' with host 'localhost' as another with host '%'.
I'm at my wits' end and have no idea how to proceed.
Any ideas are welcome.

One has to create a new MySQL User and assign privileges as below in Query prompt via phpMyAdmin or command prompt:
CREATE USER 'username'#'localhost' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'localhost' WITH GRANT OPTION;
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
Once done with all four queries, it should connect with username / password

My error message was similar and said 'Host XXX is not allowed to connect to this MySQL server' even though I was using root. Here's how to make sure that root has the correct permissions.
My setup:
Ubuntu 14.04 LTS
MySQL v5.5.37
Solution
Open up the file under etc/mysql/my.cnf
Check for:
port (by default this is port = 3306)
bind-address (by default this is bind-address = 127.0.0.1; if you want to open to all then just comment out this line. For my example, I'll say the actual server is on 10.1.1.7)
Now access the MySQL Database on your actual server (say your remote address is 123.123.123.123 at port 3306 as user root and I want to change permissions on database 'dataentry'. Remember to change the IP Address, Port, and database name to your settings)
mysql -u root -p
Enter password: <enter password>
mysql>GRANT ALL ON *.* to root#'123.123.123.123' IDENTIFIED BY 'put-your-password';
mysql>FLUSH PRIVILEGES;
mysql>exit
sudo service mysqld restart
You should now be able to remote connect to your database. For example, I'm using MySQL Workbench and putting in 'Hostname:10.1.1.7', 'Port:3306', 'Username:root'

Just perform the following steps:
Connect to MySQL (via localhost)
mysql -uroot -p
If the MySQL server is running in Kubernetes (K8s) and being accessed via a NodePort
kubectl exec -it [pod-name] -- /bin/bash
mysql -uroot -p
Create user
CREATE USER 'user'#'%' IDENTIFIED BY 'password';
Grant permissions
GRANT ALL PRIVILEGES ON *.* TO 'user'#'%' WITH GRANT OPTION;
Flush privileges
FLUSH PRIVILEGES;

You need to grant access to the user from any hostname.
This is how you add new privilege from phpmyadmin
Goto Privileges > Add a new User
Select Any Host for the desired username

Simple way:
Grant All Privileges ON *.* to 'USER_NAME'#'%' Identified By 'YOUR_PASSWORD';
then
FLUSH PRIVILEGES;
done!

The message *Host ''xxx.xx.xxx.xxx'' is not allowed to connect to this MySQL server is a reply from the MySQL server to the MySQL client. Notice how its returning the IP address and not the hostname.
If you're trying to connect with mysql -h<hostname> -u<somebody> -p and it returns this message with the IP address, then the MySQL server isn't able to do a reverse lookup on the client. This is critical because thats how it maps the MySQL client to the grants.
Make sure you can do an nslookup <mysqlclient> FROM the MySQL server. If that doesn't work, then there's no entry in the DNS server. Alternatively, you can put an entry in the MySQL server's HOSTS file (<ipaddress> <fullyqualifiedhostname> <hostname> <- The order here might matter).
An entry in my server's host file allowing a reverse lookup of the MySQL client solved this very problem.

This working for any future remote mysql connection !
sudo nano /etc/mysql/mysql.conf.d/mysqld.cnf
Navigate to the line that begins with the bind-address directive. It should look like this:
bind-address = 0.0.0.0
Login to your mysql as root terminal
mysql -u root -p
-- root password
CREATE USER 'username'#'localhost' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'localhost' WITH GRANT OPTION;
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
EXIT;
finally Grant that machine exclusive permission to connect to the database remotely with the following command.
sudo ufw allow from remote_IP_address to any port 3306

If you modify the grant tables manually (using INSERT, UPDATE, etc.), you should execute
a FLUSH PRIVILEGES statement to tell the server to reload the grant tables.
PS: I wouldn't recommend to allow any host to connect for any user (especially not the root use). If you are using mysql for a client/server application, prefer a subnet address. If you are using mysql with a web server or application server, use specific IPs.

Just use the interface provided by MySql's GUI Tool (SQLyog):
Click on User manager:
Now, if you want to grant access FOR ANY OTHER REMOTE PC, just make sure that, just like in the underneath picture, the Host field value is % (which is the wildcard)

Most of the answers here show you creating users with two host values: one for localhost, and one for %.
Please note that except for a built-in localhost user like root, you don't need to do this. If you simply want to make a new user that can log in from anywhere, you can use
CREATE USER 'myuser'#'%' IDENTIFIED BY 'mypassword';
GRANT <whatever privileges are appropriate> ON <relevant tables> TO myuser;
and it will work just fine. (As others have mentioned, it's a terrible idea to grant administrative privileges to a user from any domain.)

If you are using MySQL WorkBench, you can achieve this easily:
From the menu, select Server -> Users And Privileges
On the lower left, click on "Add account"
Fill the form with username, host matching (% means every host) and the password
Click on "Apply" on the lower right
After this you are good to go. Then, if you want to refine your configuration, you can use the "Administrative Roles" tab to set the command that can be used by the user (SELECT, ALTER etc etc) and the "Schema privileges" tab to restrict the user interaction to specific schemas.

Well, nothing of the above answer worked for me. After a lot of research, I found a solution. Though I may be late this may help others in future.
Login to your SQL server from a terminal
mysql -u root -p
-- root password
GRANT ALL ON *.* to root#'XX.XXX.XXX.XX' IDENTIFIED BY 'password';
This should solve the permission issue.
Happy coding!!

simple way is to login to phpmyadmin with root account , there goto mysql database and select user table , there edit root account and in host field add % wild card . and then through ssh flush privileges
FLUSH PRIVILEGES;

If this is a recent mysql install, then before changing anything else, try simply to execute this command and then try again:
flush privileges;
This alone fixes the issue for me on Ubuntu 16.04, mysql 5.7.20. YMMV.

Just find a better way to do that from your hosting control panel (I'm using DirectAdmin here)
simply go to the target server DB in your control panel, in my case:
MySQL management -> select your DB -> you will find: "Access Hosts", simply add your remote host here and its working now!
I guess there is a similar option on other C.panels like plesk, etc..
I'm hope it was helpful to you too.

If you happen to be running on Windows; A simple solution is to run the MySQL server instance configuration wizard. It is in your MYSQL group in the start menu. On the second from last screen click the box that says "allow root access from remote machines".

CREATE USER 'username'#'localhost' IDENTIFIED BY 'password';
FLUSH PRIVILEGES;
this error because no password to the root , and this Maybe occurred with you when you trying to connect from outside .

If you have WAMP Server + Windows 10 and you are using it for development than Right Click on Wamp Icon => Wamp Settings => Check Allow Virtual Hosts other than 127*

I was also facing same issue, It resolved in 2 min for me i just white list ip through cpanel
Suppose you are trying to connect database of server B from server A.
Go to Server B Cpanel->Remote MySQL-> enter Server A IP Address and That's it.

Well what you can do is just open mysql.cfg file and you have to change Bind-address to this
bind-address = 127.0.0.1
and then Restart mysql and you will able to connect that server to this.
Look this you can have idea form that.
this is real sol

This answer might help someone...
All these answers didnt help, then I realised I forgot to check one crucial thing.. The port :)
I have mysql running in a docker container running on a different port. I was pointing to my host machine on port 3306, which I have a mysql server running on. My container exposes the server on port 33060. So all this time, i was looking at the wrong server! doh!

This working for DirectAdmin;
Go to your DirectAdmin.
Go to your MySQL Management.
Select your database.
Under your Accesse Host tab, there is a field.
You should fill this field by xxx.xx.xxx.xx.
Click on Add Host.
Finished. Now you can access to this DB by your your_database_username & your_database_password.
So Simple!

CPANEL solution
Go to Cpanel, look for Remote MySQL.
Add the the IP in the input field:
Host (% wildcard is allowed)
Comment to remember what IP that is.
That was it for me.

1. From a terminal, connect you to your MySQL running container
docker exec -it your_container_name_or_id bash
2. In your container, connect you to the MySQL database
mysql -u your_user -p
enter your password to connect to database.
3. execute this SQL script to list all existing database users:
SELECT host, user FROM mysql.user;
The result will be some thing like below:
host
user
127.0.0.1
root
::1
root
localhost
mysql.sys
localhost
root
you should add a new row:
host
user
%
root
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%' WITH GRANT OPTION;

Some tips:
list privileges using show grants;
create a VPN and just add the ip of the tunnel

Problem: root#localhost is unable to connect to a fresh installation of mysql-community-server on openSUSE 42.2-1.150.x86_64.
Mysql refuses connections - period.
Solution:
$ ls -l /var/lib/mysql/mysql/user.*
-rw-rw---- 1 mysql mysql 0 Apr 29 19:44 /var/lib/mysql/mysql/user.MYD
-rw-rw---- 1 mysql mysql 1024 Apr 29 19:44 /var/lib/mysql/mysql/user.MYI
-rw-rw---- 1 mysql mysql 10684 Apr 29 19:44 /var/lib/mysql/mysql/user.frm
File user.MYD has 0 size (really ?!).
I copied all 3 files from another working system.
$ /usr/sbin/rcmysql stop
$ cd /var/lib/mysql/mysql/
$ scp root#othersytem:/var/lib/mysql/mysql/user.* ./
$ /usr/sbin/rcmysql start
$ cd -
$ mysql -u root -p
I was able to log in. Then, it was just a matter of re-applying all schema privileges.
Also, if you disabled IPv6, re-enable it temporary so that root#::1 account can also work.

if you are trying to execute mysql query withouth defining connectionstring, you will get this error.
Probably you forgat to define connection string before execution. have you check this out?
(sorry for bad english)

All of the answers here didn't work in my case so I guest this may help other users in the future. This can also be a problem in our code, not just in MySQL alone.
If you are using VB.NET
Instead of this code:
Dim server As String = My.Settings.DB_Server
Dim username As String = My.Settings.DB_Username
Dim password As String = My.Settings.DB_Password
Dim database As String = My.Settings.DB_Database
MysqlConn.ConnectionString = "server=" & server & ";" _
& "user id=" & username & ";" _
& "password=" & password & ";" _
& "database=" & database
MysqlConn = New MySqlConnection()
You need to move MysqlConn = New MySqlConnection() on the first line. So it would be like this
MysqlConn = New MySqlConnection()
Dim server As String = My.Settings.DB_Server
Dim username As String = My.Settings.DB_Username
Dim password As String = My.Settings.DB_Password
Dim database As String = My.Settings.DB_Database
MysqlConn.ConnectionString = "server=" & server & ";" _
& "user id=" & username & ";" _
& "password=" & password & ";" _
& "database=" & database

We Keep Coding

html mysql json google-apps-script actionscript-3 ms-access google-chrome google-maps reporting-services sql-server-2008