I don't see how to include some raw:: latex substitution commands in the rst_prolog of Sphinx.
This question has an answer for one-line replace command but not for my case.
My tentative in the conf.py is :
rst_prolog = """
.. |BeginSmaller| raw:: latex
\begingroup\footnotesize
.. |EndSmaller| raw:: latex
\endgroup
"""
which not surprisingly gives the bad results:
html compilation:
warning message <rst_prolog>:9: WARNING: Explicit markup ends without a blank line; unexpected unindent.
the produced html has some "ootnotesize" text at the begining of pages, probably because of bad escape sequence.
latex compilation:
Only egingroup appears
Does someone has an idea to solve this ?
My os:debian8.
uname -a
Linux debian 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1+deb8u2 (2017-03-07) x86_64 GNU/Linux
Here is my base file.
home
help
variables
compatibility
modelines
searching
selection
markers
indenting
reformatting
folding
tags
makefiles
mapping
registers
spelling
plugins
etc
I want to create a html file as bellow.
home
help
variables
compatibility
modelines
searching
selection
markers
indenting
reformatting
folding
tags
makefiles
mapping
registers
spelling
plugins
etc
Every line was added href and id attributes,whose values are line content pasted .html and line content itself correspondingly.
How to add html attributes and values for all lines quickly with vim and plugins?
sed,awk,sublime text 3 are all welcomed to solve the problem.
$ sed 's:.*:&:' file
home
help
variables
compatibility
modelines
searching
selection
markers
indenting
reformatting
folding
tags
makefiles
mapping
registers
spelling
plugins
etc
if you want to do this in vi itself, no plug-in neccessary
Open the file, type : and insert this line as the command
%s:.*:&
it will make all the substitutions in the file.
sed is the best solution (simple and pretty fast here) if your are sure of the content, if not it need a bit of complexity that is better treated by awk:
awk '
{
# change special char for HTML constraint
Org = URL = HTML = $0
# sample of modification
gsub( / /, "%20", URL)
gsub( /</, "%3C", HTML)
printf( "%s\n", URL, Org, HTML)
}
' YourFile
To complete this easily in Sublime Text, without any plugins added:
Open the base file in Sublime Text
Type Ctrl+Shift+P and in the fuzzy search input type syn html to set the file syntax to HTML.
In the View menu, make sure Word Wrap is toggled off.
Ctrl+A to select all.
Ctrl+Shift+L to break selection into multi-line edit.
Ctrl+C to copy selection into clipboard as multiple lines.
Alt+Shift+W to wrap each line with a tag-- then tap a to convert the default <p> tag into an <a> tag (hit esc to quit out of any context menus that might pop up)
Type a space then href=" -- you should see this being added to every line as they all have cursors. Also you should note that Sublime has automatically closed your quotes for you, so you have href="" with the cursor between the quotes.
ctrl+v -- this is where the magic happens-- your clipboard contains every lines worth of contents, so it will paste each appropriate value into the quotes where the cursor is lying. Then you simply type .html to add the extension.
Use the right arrow to move the cursors outside of the quotes for the href attribute and follow the two previous steps to similarly add an id attribute with the intended ids pasted in.
Voila! You're done.
Multi-line editing is very powerful as you learn how to combine it with other keyboard shortcuts. It has been a huge improvement in my workflow. If you have any questions please feel free to comment and I'll adjust as needed.
With bash one-liner:
while read v; do printf '%s\n' "$v" "$v" "$v"; done < file
(OR)
while read v; do echo "$v"; done < file
Try this -
awk '{print a$1b$1c$1d}' a='' d='' file
home
help
variables
compatibility
modelines
searching
selection
markers
indenting
reformatting
folding
tags
makefiles
mapping
registers
spelling
plugins
etc
Here I have created 4 variable a,b,c & d which you can edit as per your choice.
OR
while read -r i;do echo ""$i";done < f
home
help
variables
compatibility
To execute it directly in vim:
!sed 's:.*:&:' %
In awk, no regex, no nothing, just print strings around $1s, escaping "s:
$ awk '{print "" $1 ""}' file
home
help
If you happen to have empty lines in there just add /./ before the {:
/./{print ...
list=$(cat basefile.txt)
for val in $list
do
echo ""$val"" >> newfile.html
done
Using bash, you can always make a script or type this into the command line.
This vim replacement pattern handles your base file:
s#^\s*\(.\{-}\)\s*$#\1#
^\s* matches any leading spaces, then
.\{-} captures everything after that, non-greedily — allowing
\s$ to match any trailing spaces.
This avoids giving you stuff like home .
You can also process several base files with vim at once:
vim -c 'bufdo %s#^\s*\(.\{-}\)\s*$#\1# | saveas! %:p:r.html' some.txt more.txt`
bufdo %s#^\s*\(.\{-}\)\s*$#\1# runs the replacement on each buffer loaded into vim,
saveas! %:p:r.html saves each buffer with an html extension, overwriting if necessary,
vim will open and show you the saved more.html, which you can correct as needed, and
you can use :n and :prev to visit some.html.
Something like sed’s probably best for big jobs, but this lets you tweak the conversions in vim right after it’s made them, use :u to undo, etc. Enjoy!
I'm unsure why this is happening but whenever I do the following
<img src=\"Images\\{reader[2]}\" onmouseover=\"this.src='Images\\White\\{reader[2]}';\">
It outputs the following in the source code
<img onmouseover="this.src='Images\White\settings.png';" src="ImagesWhitesettings.png">
Why is it removing the backslashes?
A \ indicates the start of an escape sequence in a JavaScript string literal.
To include \ as data you have to use the escape sequence for it: \\.
That said, URLs use / and not \ as path separators.
Try using forward slashes "/", because backslashes are used to escape characters.
I have looked at how to embed HTML syntax in JavaScript string from HTML syntax highlighting in javascript strings in vim.
However, when I use CoffeeScript I cannot get the same thing working by editing coffee.vim syntax file in a similar way. I got recursive errors which said including html.vim make it too nested.
I have some HTML template in CoffeeScript like the following::
angular.module('m', [])
.directive(
'myDirective'
[
->
template: """
<div>
<div>This is <b>bold</b> text</div>
<div><i>This should be italic.</i></div>
</div>
"""
]
)
How do I get the template HTML syntax in CoffeeScript string properly highlighted in VIM?
I would proceed as follows:
Find out the syntax groups that should be highlighted as pure html would be. Add html syntax highlighting to these groups.
To find the valid syntax group under the cursor you can follow the instructions here.
In your example the syntax group of interest is coffeeHereDoc.
To add html highlighting to this group execute the following commands
unlet b:current_syntax
syntax include #HTML syntax/html.vim
syn region HtmlEmbeddedInCoffeeScript start="" end=""
\ contains=#HTML containedin=coffeeHereDoc
Since vim complains about recursion if you add these lines to coffee.vim i would go with an autocommand:
function! Coffee_syntax()
if !empty(b:current_syntax)
unlet b:current_syntax
endif
syn include #HTML syntax/html.vim
syn region HtmlEmbeddedInCoffeeScript start="" end="" contains=#HTML
\ containedin=coffeeHereDoc
endfunction
autocmd BufEnter *.coffee call Coffee_syntax()
I was also running into various issues while trying to get this to work. After some experimentation, here's what I came up with. Just create .vim/after/syntax/coffee.vim with the following contents:
unlet b:current_syntax
syntax include #HTML $VIMRUNTIME/syntax/html.vim
syntax region coffeeHtmlString matchgroup=coffeeHeredoc
\ start=+'''\\(\\_\\s*<\\w\\)\\#=+ end=+\\(\\w>\\_\\s*\\)\\#<='''+
\ contains=#HTML
syn sync minlines=300
The unlet b:current_syntax line disables the current syntax matching and lets the HTML syntax definition take over for matching regions.
Using an absolute path for the html.vim inclusion avoids the recursion problem (described more below).
The region definition matches heredoc strings that look like they contain HTML. Specifically, the start pattern looks for three single quotes followed by something that looks like the beginning of an HTML tag (there can be whitespace between the two), and the end pattern looks for the end of an HTML tag followed by three single quotes. Heredoc strings that don't look like they contain HTML are still matched using the coffeeHeredoc pattern. This works because this syntax file is being loaded after the syntax definitions from the coffeescript plugin, so we get a chance to make the more specific match (a heredoc containing HTML) before the more general match (the coffeeHeredoc region) happens.
The syn sync minlines=300 widens the matching region. My embedded HTML strings sometimes stretched over 50 lines, and Vim's syntax highlighter would get confused about how the string should be highlighted. For complete surety you could use syn sync fromstart, but for large files this could theoretically be slow (I didn't try it).
The recursion problem originally experienced by #heartbreaker was caused by the html.vim script that comes with the vim-coffeescript plugin (I'm assuming that was being used). That plugin's html.vim file includes the its coffee.vim syntax file to add coffeescript highlighting to HTML files. Using a relative syntax include, a la
syntax include #HTML syntax/html.vim
you get all the syntax/html.vim files in VIM's runtime path, including the one from the coffeescript plugin (which includes coffee.vim, hence the recursion). Using an absolute path will restrict you to only getting the particular syntax file you specify, but this seems like a reasonable tradeoff since the HTML one would embed in a coffeescript string is likely fairly simple.
my question is not about RegEx in general but about PhpStorm's search-replace-functionality with RegEx switched on.
I use PhpStorm and I want to use the dollar-sign in the replacing text.
But when I do that using RegEx mode then $ becomes the special char for identifying back references.
So I have to escape it.
But neither \$ nor $$ is accepted by PhpStorm.
How do I escape $ in RegEx-mode?
you have to use \\$ for the replacing text.
searching for $ is done with \$.