my version : cocos2dx-0.13.0-wp8-0.8
my code is:
CCTexture2D::PVRImagesHavePremultipliedAlpha(true);
CCSpriteFrameCache::sharedSpriteFrameCache()->addSpriteFramesWithFile("Towers/TArrow-hd.plist", "Towers/TArrow-hd.pvr.ccz");
CCSpriteFrame* frame = CCSpriteFrameCache::sharedSpriteFrameCache()- >spriteFrameByName("Arrow-13.png");
CCSprite *sp = CCSprite::spriteWithSpriteFrame(frame);
sp->setPosition(ccp(100,100));
this->addChild(sp, 1);
run to "CCSprite *sp = CCSprite::spriteWithSpriteFrame(frame)", have exception,
spriteWithSpriteFrameName("") also
exception:
D3D11 WARNING: Process is terminating. Using simple reporting. Please call ReportLiveObjects() at runtime for standard reporting. [ STATE_CREATION WARNING #0: UNKNOWN]
The thread 0xba4 has exited with code 3 (0x3).
D3D11 WARNING: Live Producer at 0x00B987E0, Refcount: 6. [ STATE_CREATION WARNING #0: UNKNOWN]
The thread 0x668 has exited with code 3 (0x3).
The thread 0x20 has exited with code 3 (0x3).
D3D11 WARNING: Live Object at 0x00B9A530, Refcount: 1. [ STATE_CREATION WARNING #0: UNKNOWN]
D3D11 WARNING: Live Object at 0x02CC17F8, Refcount: 0. [ STATE_CREATION WARNING #0: UNKNOWN]
change pvr.ccz to png, it's ok
Related
Good day!
I have built a small IoT device that monitors the conditions inside a specific enclosure using an ESP32 and a couple of sensors. I want to monitor that data by publishing it to the ThingSpeak cloud, then writing it to InfluxDB with Telegraf and finally using the InfluxDB data source in Grafana to visualize it.
So far I have made everything work flawlessly, but with one small exception.
Which is: One of the plugins in my telegraf config fails with the error:
parsing metrics failed: Unable to convert field 'temperature' to type int: strconv.ParseInt: parsing "15.4": invalid syntax
The plugins are [inputs.http]] and [[inputs.http.json_v2]] and what I am doing with them is authenticating against my ThingSpeak API and parsing the json output of my fields. Then in my /etc/telegraf/telegraf.conf under [[inputs.http.json_v2.field]] I have added type = int as otherwise telegraf writes my metrics as Strings in InfluxDB and the only way to visualize them is using either a table or a single stat, because the rest of the flux queries fail with the error unsupported input type for mean aggregate: string. However, when I change to type = float in the config file I get a different error:
unprocessable entity: failure writing points to database: partial write: field type conflict: input field "temperature" on measurement "sensorData" is type float, already exists as type string dropped=1
I have a suspicion that I have misconfigured the parser plugin, however after hours of debugging I couldn't come up with a solution.
Some information that might be of use:
Telegraf version: Telegraf 1.24.2
Influxdb version: InfluxDB v2.4.0
Please see below for my telegraf.conf as well as the error messages.
Any help would be highly appreciated! (:
[agent]
interval = "10s"
round_interval = true
metric_batch_size = 1000
metric_buffer_limit = 1000
collection_jitter = "0s"
flush_interval = "10s"
flush_jitter = "0s"
precision = ""
hostname = ""
omit_hostname = false
[[outputs.influxdb_v2]]
urls = ["http://localhost:8086"]
token = "XXXXXXXX"
organization = "XXXXXXXXX"
bucket = "sensor"
[[inputs.http]]
urls = [
"https://api.thingspeak.com/channels/XXXXX/feeds.json?api_key=XXXXXXXXXX&results=2"
]
name_override = "sensorData"
tagexclude = ["url", "host"]
data_format = "json_v2"
## HTTP method
method = "GET"
[[inputs.http.json_v2]]
[[inputs.http.json_v2.field]]
path = "feeds.1.field1"
rename = "temperature"
type = "int" #Error message 1
#type = "float" #Error message 2
Error when type = "float":
me#myserver:/etc/telegraf$ telegraf -config telegraf.conf --debug
2022-10-16T00:31:43Z I! Starting Telegraf 1.24.2
2022-10-16T00:31:43Z I! Available plugins: 222 inputs, 9 aggregators, 26 processors, 20
parsers, 57 outputs
2022-10-16T00:31:43Z I! Loaded inputs: http
2022-10-16T00:31:43Z I! Loaded aggregators:
2022-10-16T00:31:43Z I! Loaded processors:
2022-10-16T00:31:43Z I! Loaded outputs: influxdb_v2
2022-10-16T00:31:43Z I! Tags enabled: host=myserver
2022-10-16T00:31:43Z I! [agent] Config: Interval:10s, Quiet:false, Hostname:"myserver",
Flush Interval:10s
2022-10-16T00:31:43Z D! [agent] Initializing plugins
2022-10-16T00:31:43Z D! [agent] Connecting outputs
2022-10-16T00:31:43Z D! [agent] Attempting connection to [outputs.influxdb_v2]
2022-10-16T00:31:43Z D! [agent] Successfully connected to outputs.influxdb_v2
2022-10-16T00:31:43Z D! [agent] Starting service inputs
2022-10-16T00:31:53Z E! [outputs.influxdb_v2] Failed to write metric to sensor (will be
dropped: 422 Unprocessable Entity): unprocessable entity: failure writing points to
database: partial write: field type conflict: input field "temperature" on measurement
"sensorData" is type float, already exists as type string dropped=1
2022-10-16T00:31:53Z D! [outputs.influxdb_v2] Wrote batch of 1 metrics in 8.9558ms
2022-10-16T00:31:53Z D! [outputs.influxdb_v2] Buffer fullness: 0 / 10000 metrics
Error when type = "int"
me#myserver:/etc/telegraf$ telegraf -config telegraf.conf --debug
2022-10-16T00:37:05Z I! Starting Telegraf 1.24.2
2022-10-16T00:37:05Z I! Available plugins: 222 inputs, 9 aggregators, 26 processors, 20
parsers, 57 outputs
2022-10-16T00:37:05Z I! Loaded inputs: http
2022-10-16T00:37:05Z I! Loaded aggregators:
2022-10-16T00:37:05Z I! Loaded processors:
2022-10-16T00:37:05Z I! Loaded outputs: influxdb_v2
2022-10-16T00:37:05Z I! Tags enabled: host=myserver
2022-10-16T00:37:05Z I! [agent] Config: Interval:10s, Quiet:false, Hostname:"myserver",
Flush Interval:10s
2022-10-16T00:37:05Z D! [agent] Initializing plugins
2022-10-16T00:37:05Z D! [agent] Connecting outputs
2022-10-16T00:37:05Z D! [agent] Attempting connection to [outputs.influxdb_v2]
2022-10-16T00:37:05Z D! [agent] Successfully connected to outputs.influxdb_v2
2022-10-16T00:37:05Z D! [agent] Starting service inputs
2022-10-16T00:37:10Z E! [inputs.http] Error in plugin:
[url=https://api.thingspeak.com/channels/XXXXXX/feeds.json?
api_key=XXXXXXX&results=2]: parsing metrics failed: Unable to convert field
'temperature' to type int: strconv.ParseInt: parsing "15.3": invalid syntax
Fixed it by leaving type = float under [[inputs.http.json_v2.field]] in telegraf.conf and creating a NEW bucket with a new API key in Influx.
The issue was that the bucket sensor that I had previously defined in my telegraf.conf already had the field temperature created in my influx database from previous tries with its type set as last (aka: String) which could not be overwritten with the new type mean (aka: float).
As soon as I deleted all pre existing buckets everything started working as expected.
InfluxDB dashboard
Starting in macOS 12 (Monterey), the system apparently writes crash file as .ips files, instead of the traditional .crash file format.
The file appears to contain JSON data:
{"app_name":"Helper","timestamp":"2021-10-30 18:49:32.00 +0100","app_version":"3.0.0(66) beta","slice_uuid":"673198dd-94ac-31a7-9e81-09fe6c781255","build_version":"3.0.0.66","platform":1,"bundleID":"com.dislt.helper","share_with_app_devs":0,"is_first_party":0,"bug_type":"309","os_version":"macOS 12.0.1 (21A559)","incident_id":"CC03C2EC-C1D4-4F6E-AA1F-6C4EC555D6B8","name":"Helper"}
{
"uptime" : 91000,
"procLaunch" : "2021-10-30 18:49:29.7791 +0100",
"procRole" : "Unspecified",
"version" : 2,
"userID" : 501,
"deployVersion" : 210,
"modelCode" : "MacBookPro14,3",
"procStartAbsTime" : 91844701503187,
"coalitionID" : 1244,
"osVersion" : {
"train" : "macOS 12.0.1",
"build" : "21A559",
"releaseType" : "User"
},
"captureTime" : "2021-10-30 18:49:32.4572 +0100",
"incident" : "92A89610-D70A-4D93-A974-A9018BB5C72A",
"bug_type" : "309",
"pid" : 77765,
"procExitAbsTime" : 91847378271126,
"cpuType" : "X86-64",
"procName" : "Helper",
...
When I preview the file or open it in the Console app, a traditional crash report is automatically generated:
-------------------------------------
Translated Report (Full Report Below)
-------------------------------------
Process: Helper [77765]
Path: /Users/USER/Library/Application Support/Helper.app/Contents/MacOS/Helper
Identifier: com.distl.helper
Version: 3.0.0(66) beta (3.0.0.66)
Code Type: X86-64 (Native)
Parent Process: TestBead [77726]
Responsible: TestBead [77726]
User ID: 501
Date/Time: 2021-10-30 18:49:32.4572 +0100
OS Version: macOS 12.0.1 (21A559)
Report Version: 12
Bridge OS Version: 3.0 (14Y908)
Anonymous UUID: CC03C2EC-C1D4-4F6E-AA1F-6C4EC555D6B8
Time Awake Since Boot: 91000 seconds
System Integrity Protection: enabled
Crashed Thread: 1 Dispatch queue: com.apple.NSXPCConnection.user.anonymous.77726
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00007f780071a000
Exception Codes: 0x0000000000000001, 0x00007f780071a000
Exception Note: EXC_CORPSE_NOTIFY
Termination Reason: Namespace SIGNAL, Code 11 Segmentation fault: 11
Terminating Process: exc handler [77765]
...
I have customer support and development tools that scan these crash report files automatically, and I'd like to find out if there's a way to automate the translation of the JSON data back into the traditional crash report format?
I'd like to do this to (a) avoid rewriting my crash report scanning tools (although that wouldn't be impossible), and (b) automatically translate these files into a human readable format, without resorting to opening the file in the Console app.
I've run into the same problem. I haven't tried it myself yet, but someone has already created an ips2crash command available at GitHub. As the name implies, it should convert an .ips file to the (now) legacy crash report format.
In visual studio 2019, I can build and run my specific test cases perfectly in test explorer. But I run from command line, its showing below error.
Discovered 1 tests
Thread#0: The argument type 'System.MarshalByRefObject' cannot be converted into parameter type 'TechTalk.SpecRun.Commo
Thread#1:
Thread#2:
100% (1/1) completed
Done.
TechTalk.SpecRun.Framework.SpecRunException: At least one test thread aborted. ---> System.Runtime.Remoting.RemotingException: The argument type 'System.MarshalByRefObject' cannot be converted into parameter type 'TechTalk.SpecRun.Common.Logging.ITestLogger'. ---> System.InvalidCastException: Object must implement IConvertible.
at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
at System.Runtime.Remoting.Messaging.Message.CoerceArg(Object value, Type pt)
--- End of inner exception stack trace ---
Server stack trace:
at System.Runtime.Remoting.Messaging.Message.CoerceArg(Object value, Type pt)
at System.Runtime.Remoting.Messaging.Message.CoerceArgs(MethodBase mb, Object[] args, ParameterInfo[] pi)
at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at TechTalk.SpecRun.Framework.ITestAssemblyExecutor.Initialize(Int32 threadId, ITestExecutionManager executionManager, IAssemblyReference assemblyReference, ITestLogger logger, String testAssemblyFullPath, String testAssemblyConfigFilePath, TestExecutionConfiguration testExecutionConfiguration)
at TechTalk.SpecRun.Framework.TestThread.InitializeTestThreadExecutor(IAssemblyReference testAssembly, ExecutionModelSettings executionModelSettings, String testTarget)
at TechTalk.SpecRun.Framework.TestThread.GetThreadExecutorFor(TestItem testItem)
at TechTalk.SpecRun.Framework.TestThread.Run(ITestExecutionManager executionManagerForRun)
at TechTalk.SpecRun.Framework.AsyncTestThreadRunner.RunSync(TestExecutionManager executionManager)
--- End of inner exception stack trace ---
Result: test framework error: At least one test thread aborted.
Total: 1
Succeeded: 0
Ignored: 0
Pending: 0
Skipped: 1
Failed: 0
version I'm using:
.NET Framework : 4.6.2
SpecFlow : 2.2.1
SpecRun.Runner : 1.6.3
SpecRun.SpecFlow : 1.6.3
SpecRun.SpecFlow.2-2-0 : 1.6.3
command:
SpecRun.exe run Default.srprofile /basefolder:C:\Development\Project\bin\Debug\Automation\TestAutomation.Specs\ /outputfolder:output /filter:"testpath:Scenario:Search+page+in+Automation"
How can I fix this issue?
It is an active SpecFlow bug: https://github.com/SpecFlowOSS/SpecFlow/issues/1443
Best regards,
PM
While trying to use JMockit (1.21) with JUnit (4.8) test cases I ran into issue with OpenJDK (1.7). I'm using Eclipse. After searching on SO, I found the solution about adding '-javaagent:path/to/JMockit/jar' argument to JVM and putting JMockit dependency before JUnit in maven. But after adding that argument, my test won't run and instead I get following error. Did anyone have this issue and how did you solve it? It works if I use OracleJDK but I'm looking for solution where it runs with OpenJDK.
#
# A fatal error has been detected by the Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0000000051cfbbe8, pid=9268, tid=2272
#
# JRE version: OpenJDK Runtime Environment (7.0) (build 1.7.0-45-asmurthy_2014_01_10_19_46-b00)
# Java VM: Dynamic Code Evolution 64-Bit Server VM (24.45-b06 mixed mode windows-amd64 compressed oops)
# Problematic frame:
# V [jvm.dll+0x6bbe8]
#
# Failed to write core dump. Minidumps are not enabled by default on client versions of Windows
#
# If you would like to submit a bug report, please visit:
# http://bugreport.sun.com/bugreport/crash.jsp
#
--------------- T H R E A D ---------------
Current thread (0x000000000270c000): VMThread [stack: 0x00000000074e0000,0x00000000075e0000] [id=2272]
siginfo: ExceptionCode=0xc0000005, reading address 0x0000000000000000
Registers:
RAX=0x0000000000000000, RBX=0x0000000000000000, RCX=0x0000000000000000, RDX=0x00000007fae04720
RSP=0x00000000075df190, RBP=0x00000000523a16d8, RSI=0x0000000002abe2b0, RDI=0x00000000523a16e0
R8 =0x0000000000000000, R9 =0x0000000000000100, R10=0x0000000000041999, R11=0x0000000008eab1f0
R12=0x000000000270c000, R13=0x00000007fb208040, R14=0x0000000000000001, R15=0x00000000000003d8
RIP=0x0000000051cfbbe8, EFLAGS=0x0000000000010206
Top of Stack: (sp=0x00000000075df190)
0x00000000075df190: 00000007fb208050 0000000002abe200
0x00000000075df1a0: 00000007fb208040 000000000270c000
0x00000000075df1b0: 00000000523a16e0 0000000051e0ecbc
0x00000000075df1c0: 0000000000000000 00000000523a16d8
0x00000000075df1d0: 0000000002abe2b0 000000000270c000
0x00000000075df1e0: 00000000521ea7b8 0000000052450100
0x00000000075df1f0: 0000000000000000 00000000521ea7a0
0x00000000075df200: 0000000000001000 00000000075df1e0
0x00000000075df210: 0000000000000100 0000000000000000
0x00000000075df220: 00000000073158d8 00000000000003d8
0x00000000075df230: 00000000073158d8 0000000002701ac0
0x00000000075df240: 00000000073154f0 0000000051e74dc7
0x00000000075df250: 00000000026c3de0 0000000000000001
0x00000000075df260: 0000000002abe2b0 0000000007315500
0x00000000075df270: 0000000007315500 00000000073154f0
0x00000000075df280: 0000000002701ac0 0000000051e74072
Instructions: (pc=0x0000000051cfbbe8)
0x0000000051cfbbc8: cc cc cc cc cc cc cc cc 48 89 5c 24 08 57 48 83
0x0000000051cfbbd8: ec 20 48 8b 05 17 20 69 00 48 8b 0d c0 e5 68 00
0x0000000051cfbbe8: 48 63 18 e8 60 c3 fa ff 33 ff 48 85 db 7e 37 66
0x0000000051cfbbf8: 0f 1f 84 00 00 00 00 00 48 8b 05 f1 1f 69 00 48
Register to memory mapping:
RAX=0x0000000000000000 is an unknown value
RBX=0x0000000000000000 is an unknown value
RCX=0x0000000000000000 is an unknown value
RDX=0x00000007fae04720 is an oop
{instance class}
- klass: {other class}
RSP=0x00000000075df190 is an unknown value
RBP=0x00000000523a16d8 is an unknown value
RSI=0x0000000002abe2b0 is pointing into the stack for thread: 0x00000000026c7000
RDI=0x00000000523a16e0 is an unknown value
R8 =0x0000000000000000 is an unknown value
R9 =0x0000000000000100 is an unknown value
R10=0x0000000000041999 is an unknown value
R11=0x0000000008eab1f0 is an unknown value
R12=0x000000000270c000 is an unknown value
R13=0x00000007fb208040 is an oop
{instance class}
- klass: {other class}
R14=0x0000000000000001 is an unknown value
R15=0x00000000000003d8 is an unknown value
Stack: [0x00000000074e0000,0x00000000075e0000], sp=0x00000000075df190, free space=1020k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x6bbe8]
VM_Operation (0x0000000002abe2b0): RedefineClasses, mode: safepoint, requested by thread 0x00000000026c7000
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x000000000739c800 JavaThread "Attach Listener" daemon [_thread_blocked, id=6668, stack(0x0000000007c60000,0x0000000007d60000)]
0x000000000739b000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=5620, stack(0x0000000007aa0000,0x0000000007ba0000)]
0x0000000007379800 JavaThread "Finalizer" daemon [_thread_blocked, id=9832, stack(0x00000000078c0000,0x00000000079c0000)]
0x0000000007370000 JavaThread "Reference Handler" daemon [_thread_blocked, id=7516, stack(0x0000000007680000,0x0000000007780000)]
0x00000000026c7000 JavaThread "main" [_thread_blocked, id=6580, stack(0x00000000029c0000,0x0000000002ac0000)]
Other Threads:
=>0x000000000270c000 VMThread [stack: 0x00000000074e0000,0x00000000075e0000] [id=2272]
VM state:at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
[0x00000000026c3e60] Threads_lock - owner thread: 0x000000000270c000
[0x00000000026c4360] Heap_lock - owner thread: 0x00000000026c7000
[0x00000000026c4b60] RedefineClasses_lock - owner thread: 0x00000000026c7000
Heap
def new generation total 118016K, used 21035K [0x000000067ae00000, 0x0000000682e00000, 0x00000006fae00000)
eden space 104960K, 20% used [0x000000067ae00000, 0x000000067c28af18, 0x0000000681480000)
from space 13056K, 0% used [0x0000000681480000, 0x0000000681480000, 0x0000000682140000)
to space 13056K, 0% used [0x0000000682140000, 0x0000000682140000, 0x0000000682e00000)
tenured generation total 262144K, used 0K [0x00000006fae00000, 0x000000070ae00000, 0x00000007fae00000)
the space 262144K, 0% used [0x00000006fae00000, 0x00000006fae00000, 0x00000006fae00200, 0x000000070ae00000)
compacting perm gen total 21248K, used 4129K [0x00000007fae00000, 0x00000007fc2c0000, 0x0000000800000000)
the space 21248K, 19% used [0x00000007fae00000, 0x00000007fb208478, 0x00000007fb208600, 0x00000007fc2c0000)
No shared spaces configured.
Card table byte_map: [0x0000000005e60000,0x0000000006a90000] byte_map_base: 0x0000000002a89000
Polling page: 0x0000000000150000
Code Cache [0x0000000002da0000, 0x0000000003010000, 0x0000000005da0000)
total_blobs=187 nmethods=0 adapters=156 free_code_cache=48761Kb largest_free_block=49932032
Compilation events (0 events):
No events
GC Heap History (0 events):
No events
Deoptimization events (0 events):
No events
Internal exceptions (10 events):
Event: 1.210 Thread 0x00000000026c7000 Threw 0x000000067c036fa0 at C:\openjdk\jdk7u\hotspot\src\share\vm\interpreter\interpreterRuntime.cpp:347
Event: 1.211 Thread 0x00000000026c7000 Threw 0x000000067c03ae78 at C:\openjdk\jdk7u\hotspot\src\share\vm\prims\jvm.cpp:1244
Event: 1.212 Thread 0x00000000026c7000 Threw 0x000000067c045f10 at C:\openjdk\jdk7u\hotspot\src\share\vm\prims\jvm.cpp:1244
Event: 1.213 Thread 0x00000000026c7000 Threw 0x000000067c057398 at C:\openjdk\jdk7u\hotspot\src\share\vm\prims\jvm.cpp:1244
Event: 1.214 Thread 0x00000000026c7000 Threw 0x000000067c066510 at C:\openjdk\jdk7u\hotspot\src\share\vm\prims\jvm.cpp:1244
Event: 1.215 Thread 0x00000000026c7000 Threw 0x000000067c072ac0 at C:\openjdk\jdk7u\hotspot\src\share\vm\prims\jvm.cpp:1244
Event: 1.216 Thread 0x00000000026c7000 Threw 0x000000067c084678 at C:\openjdk\jdk7u\hotspot\src\share\vm\prims\jvm.cpp:1244
Event: 1.217 Thread 0x00000000026c7000 Threw 0x000000067c08c7b0 at C:\openjdk\jdk7u\hotspot\src\share\vm\prims\jvm.cpp:1244
Event: 1.218 Thread 0x00000000026c7000 Threw 0x000000067c0934a8 at C:\openjdk\jdk7u\hotspot\src\share\vm\prims\jvm.cpp:1244
Event: 1.218 Thread 0x00000000026c7000 Threw 0x000000067c09cac8 at C:\openjdk\jdk7u\hotspot\src\share\vm\prims\jvm.cpp:1244
Events (10 events):
Event: 1.215 loading class 0x0000000008956520 done
Event: 1.216 loading class 0x0000000008959de0
Event: 1.216 loading class 0x0000000008959de0 done
Event: 1.217 loading class 0x0000000008ea91d0
Event: 1.217 loading class 0x0000000008ea91d0 done
Event: 1.218 loading class 0x0000000008d643e0
Event: 1.218 loading class 0x0000000008d643e0 done
Event: 1.218 loading class 0x0000000008958d20
Event: 1.218 loading class 0x0000000008958d20 done
Event: 1.219 Executing VM operation: RedefineClasses
Dynamic libraries:
0x000000013f7c0000 - 0x000000013f7f1000 S:\OpenJDK\bin\javaw.exe
0x0000000076ef0000 - 0x0000000077099000 C:\WINDOWS\SYSTEM32\ntdll.dll
0x0000000076cb0000 - 0x0000000076dcf000 C:\WINDOWS\system32\kernel32.dll
0x000007fefcde0000 - 0x000007fefce4b000 C:\WINDOWS\system32\KERNELBASE.dll
0x0000000074990000 - 0x0000000074a19000 C:\WINDOWS\System32\SYSFER.DLL
0x000007feff0f0000 - 0x000007feff1cb000 C:\WINDOWS\system32\ADVAPI32.dll
0x000007fefed40000 - 0x000007fefeddf000 C:\WINDOWS\system32\msvcrt.dll
0x000007fefe660000 - 0x000007fefe67f000 C:\WINDOWS\SYSTEM32\sechost.dll
0x000007fefefc0000 - 0x000007feff0ed000 C:\WINDOWS\system32\RPCRT4.dll
0x0000000076df0000 - 0x0000000076eea000 C:\WINDOWS\system32\USER32.dll
0x000007fefe270000 - 0x000007fefe2d7000 C:\WINDOWS\system32\GDI32.dll
0x000007fefe360000 - 0x000007fefe36e000 C:\WINDOWS\system32\LPK.dll
0x000007fefe370000 - 0x000007fefe43a000 C:\WINDOWS\system32\USP10.dll
0x000007fefb460000 - 0x000007fefb654000 C:\WINDOWS\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_fa3b1e3d17594757\COMCTL32.dll
0x000007fefee30000 - 0x000007fefeea1000 C:\WINDOWS\system32\SHLWAPI.dll
0x000007fefe630000 - 0x000007fefe65e000 C:\WINDOWS\system32\IMM32.DLL
0x000007fefeeb0000 - 0x000007fefefb9000 C:\WINDOWS\system32\MSCTF.dll
0x0000000052420000 - 0x00000000524f2000 S:\OpenJDK\jre\bin\msvcr100.dll
0x0000000051c90000 - 0x000000005241e000 S:\OpenJDK\jre\bin\server\jvm.dll
0x000007fef82b0000 - 0x000007fef82b9000 C:\WINDOWS\system32\WSOCK32.dll
0x000007fefede0000 - 0x000007fefee2d000 C:\WINDOWS\system32\WS2_32.dll
0x000007feff1d0000 - 0x000007feff1d8000 C:\WINDOWS\system32\NSI.dll
0x000007fefaca0000 - 0x000007fefacdb000 C:\WINDOWS\system32\WINMM.dll
0x00000000770c0000 - 0x00000000770c7000 C:\WINDOWS\system32\PSAPI.DLL
0x000007feece20000 - 0x000007feece2f000 S:\OpenJDK\jre\bin\verify.dll
0x000007fee0320000 - 0x000007fee0348000 S:\OpenJDK\jre\bin\java.dll
0x000007fee6ee0000 - 0x000007fee6f03000 S:\OpenJDK\jre\bin\instrument.dll
0x000007fee06e0000 - 0x000007fee06f5000 S:\OpenJDK\jre\bin\zip.dll
0x000007fef1f90000 - 0x000007fef20b5000 C:\WINDOWS\system32\dbghelp.dll
VM Arguments:
jvm_args: -javaagent:S:\.m2\org\jmockit\jmockit\1.21\jmockit-1.21.jar -Dfile.encoding=ISO-8859-1
java_command: org.eclipse.jdt.internal.junit.runner.RemoteTestRunner -version 3 -port 61294 -testLoaderClass org.eclipse.jdt.internal.junit4.runner.JUnit4TestLoader -loaderpluginname org.eclipse.jdt.junit4.runtime -classNames com.examples.JMockitTest
java_command: org.eclipse.jdt.internal.junit.runner.RemoteTestRunner -version 3 -port 61294 -testLoaderClass org.eclipse.jdt.internal.junit4.runner.JUnit4TestLoader -loaderpluginname org.eclipse.jdt.junit4.runtime -classNames com.examples.JMockitTest
Launcher Type: SUN_STANDARD
Environment Variables:
JRE_HOME=C:\Program Files (x86)\IBM\RationalSDLC\Common\Java5.0\jre
PATH=C:\Python27\;C:\Python27\Scripts;C:\Program Files (x86)\IBM\RationalSDLC\Clearquest\cqcli\bin;C:\PERL51001\Perl\site\bin;C:\PERL51001\Perl\bin;C:\Program Files (x86)\RSA SecurID Token Common;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\java\jre6\bin\;C:\Perl64\bin;C:\Program Files (x86)\Perforce;C:\Program Files (x86)\IBM\RationalSDLC\ClearCase\bin;C:\Program Files (x86)\IBM\RationalSDLC\common;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Program Files\TortoiseGit\bin;C:\Program Files\Microsoft SQL Server\110\Tools\Binn\;C:\Program Files (x86)\Microsoft SDKs\TypeScript\1.0\;C:\Program Files\Microsoft SQL Server\120\Tools\Binn\;C:\Program Files\nodejs\
Thanks
I am having issue with box-sdk (https://github.com/box/box-windows-sdk-v2) upload API.
Issue :
When try to upload large file (more than 3MB) (file less than 3mb works great.)
Upload api fails and throws below exception.
Error :
ToString :
System.AggregateException: One or more errors occurred. ---> System.Threading.Tasks.TaskCanceledException: A task was canceled.
--- End of inner exception stack trace ---
at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at XXXX.Program.d__34.MoveNext() in d:\Gaurav\TFS\XXXX\XXXX\Program.cs:line 319
---> (Inner Exception #0) System.Threading.Tasks.TaskCanceledException: A task was canceled.<---
StackTrace :
at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at XXXX.Program.d__34.MoveNext() in d:\Gaurav\TFS\XXXX\XXXX\Program.cs:line 319
InnerException :
System.Threading.Tasks.TaskCanceledException: A task was canceled. TIME : 2014-05-28 04:55:59 PM
Code that is generating error :
using (Task<BoxFile> uploadTask = boxClient.FilesManager.UploadAsync(boxFileRequest, spStream))
{
BoxFile newFile = uploadTask.Result;
}
Try to use timeout parameter in UploadAsync method:
boxFile = Client.FilesManager.UploadAsync(req, fs, null, new TimeSpan(1, 0, 0)).Result;