I have a form that posts to php. As part of the post, I need to insert data into 2 different tables. Right now I am just doing one insert followed by the second insert.
You can probably already tell what I'm going to ask next :)
I need to be able to ensure both inserts happen. If the second one doesn't happen, I need the first one not to happen or be rolled back.
My understanding is this is possible in mysql if it is using innodb, which is the default for mysql 5.5 and above however I'm on mysql 5.3 which is the latest release for centos. Not sure how I can tell, and if innodb is turned on, how do I write my query? And then of course I might have to assume that anyone else who might use my program might not have the right version of mysql with innodb.
Thanks
When you create your table you can specify wich engine it should run. To be able to use transactions it need to in InnoDB. That part of CREATE TABLE is at the end in table options. If your table isn't already InnoDB you can change it with ALTER TABLE.
It's possible to set auto_commit to false from php and that is what you want to do. Then everything you do will be inside one transaction until you do a commit or rollback.
The other alternativ is to manually send START TRANSACTION, COMMIT or ROLLBACK. There is an example in the php manual.
START TRANSACTION
if(first insert failed)
{
ROLLBACK
}
else if(second insert failed)
{
ROLLBACK
}
else
{
COMMIT
}
Related
I made a wrong update query in my table.
I forgot to make an id field in the WHERE clause.
So that updated all my rows.
How to recover that?
I didn't have a backup....
There are two lessons to be learned here:
Backup data
Perform UPDATE/DELETE statements within a transaction, so you can use ROLLBACK if things don't go as planned
Being aware of the transaction (autocommit, explicit and implicit) handling for your database can save you from having to restore data from a backup.
Transactions control data manipulation statement(s) to ensure they are atomic. Being "atomic" means the transaction either occurs, or it does not. The only way to signal the completion of the transaction to database is by using either a COMMIT or ROLLBACK statement (per ANSI-92, which sadly did not include syntax for creating/beginning a transaction so it is vendor specific). COMMIT applies the changes (if any) made within the transaction. ROLLBACK disregards whatever actions took place within the transaction - highly desirable when an UPDATE/DELETE statement does something unintended.
Typically individual DML (Insert, Update, Delete) statements are performed in an autocommit transaction - they are committed as soon as the statement successfully completes. Which means there's no opportunity to roll back the database to the state prior to the statement having been run in cases like yours. When something goes wrong, the only restoration option available is to reconstruct the data from a backup (providing one exists). In MySQL, autocommit is on by default for InnoDB - MyISAM doesn't support transactions. It can be disabled by using:
SET autocommit = 0
An explicit transaction is when statement(s) are wrapped within an explicitly defined transaction code block - for MySQL, that's START TRANSACTION. It also requires an explicitly made COMMIT or ROLLBACK statement at the end of the transaction. Nested transactions is beyond the scope of this topic.
Implicit transactions are slightly different from explicit ones. Implicit transactions do not require explicity defining a transaction. However, like explicit transactions they require a COMMIT or ROLLBACK statement to be supplied.
Conclusion
Explicit transactions are the most ideal solution - they require a statement, COMMIT or ROLLBACK, to finalize the transaction, and what is happening is clearly stated for others to read should there be a need. Implicit transactions are OK if working with the database interactively, but COMMIT statements should only be specified once results have been tested & thoroughly determined to be valid.
That means you should use:
SET autocommit = 0;
START TRANSACTION;
UPDATE ...;
...and only use COMMIT; when the results are correct.
That said, UPDATE and DELETE statements typically only return the number of rows affected, not specific details. Convert such statements into SELECT statements & review the results to ensure correctness prior to attempting the UPDATE/DELETE statement.
Addendum
DDL (Data Definition Language) statements are automatically committed - they do not require a COMMIT statement. IE: Table, index, stored procedure, database, and view creation or alteration statements.
Sorry man, but the chances of restoring an overwritten MySQL database are usually close to zero. Different from deleting a file, overwriting a record actually and physically overwrites the existing data in most cases.
To be prepared if anything comes up here, you should stop your MySQL server, and make a copy of the physical directory containing the database so nothing can get overwritten further: A simple copy+paste of the data folder to a different location should do.
But don't get your hopes up - I think there's nothing that can be done really.
You may want to set up a frequent database backup for the future. There are many solutions around; one of the simplest, most reliable and easiest to automate (using at or cron in Linux, or the task scheduler in Windows) is MySQL's own mysqldump.
Sorry to say that, but there is no way to restore the old field values without a backup.
Don't shoot the messenger...
Do you have binlogs enabled? You can recover by accessing the binlogs.
I wrote a tool for our project, for applying sql update files that were committed, to the DB. Whenever run (on deployment), it calculates the list of update files which need to be applied, and applies them iniside a transaction.
Recently I became aware of an issue: mysql would implicitly commit a transaction, whenever DDL statements (like create) are executed. http://dev.mysql.com/doc/refman/5.0/en/implicit-commit.html
This is an issue for me, as sometimes an sql update file contains several statements, which as I understand will result in committing the transaction in the middle of executing the update file. This is a problem, because whenever a subsequent update will fail (which happens from time to time) I want to be able to rollback the transaction, or at least track which update files where applied (completely) and which were not.
Is there a way around the implicit transactions issue? I.e. is there a way to rollback a sequence of DDL statements whenever one of them fail?
Any other suggestions how I can handle the issue?
Thanks
Gidi
No. MySQL does not support transactional DDL. You either need to separate your DDL statements from DML statements, or perhaps try to use migration tool like RuckUsing
I have accidentally deleted all rows of the database is there a way to retrieve them back. Since I am working of department server I wont be take backup. But I know in oracle I could rollback the DML commands. I tried to use rollback but its not working?
or I have to create whole data base again?
Sorry, but if the transaction with the delete statement has already been committed then I don't think you can recover the lost data unless you have a backup.
To avoid this accident, I'd advise always testing your WHERE clause using a SELECT query first, before running a DELETE statement. Then you will notice if it will delete rows that you didn't intend to delete.
I want to write a procedure that will handle the insert of data into 2 tables. If the insert should fail in either one then the whole procedure should fail. I've tried this many different ways and cannot get it to work. I've purposefully made my second insert fail but the data is inserted into the first table anyway.
I've tried to nest IF statements based on the rowcount but even though the data fails on the second insert, the data is still being inserted into the first table. I'm looking for a total number of 2 affected rows.
Can someone please show me how to handle multiple inserts and rollback if one of them fails? A short example would be nice.
If you are using InnoDB tables (or other compatible engine) you can use the Transaction feature of MySQL that allows you to do exactly what you want.
Basically you start the transaction
do the queries checking for the result
If every result is OK you call the CONMIT
else you call the ROLLBACK to void all the queries within the transaction.
You can read and article about with examples here.
HTH!
You could try turning autocommit off. It might be automatically committing your first insert even though you haven't explicitly committed the transaction that's been started:
SET autocommit = 0;
START TRANSACTION
......
I made a wrong update query in my table.
I forgot to make an id field in the WHERE clause.
So that updated all my rows.
How to recover that?
I didn't have a backup....
There are two lessons to be learned here:
Backup data
Perform UPDATE/DELETE statements within a transaction, so you can use ROLLBACK if things don't go as planned
Being aware of the transaction (autocommit, explicit and implicit) handling for your database can save you from having to restore data from a backup.
Transactions control data manipulation statement(s) to ensure they are atomic. Being "atomic" means the transaction either occurs, or it does not. The only way to signal the completion of the transaction to database is by using either a COMMIT or ROLLBACK statement (per ANSI-92, which sadly did not include syntax for creating/beginning a transaction so it is vendor specific). COMMIT applies the changes (if any) made within the transaction. ROLLBACK disregards whatever actions took place within the transaction - highly desirable when an UPDATE/DELETE statement does something unintended.
Typically individual DML (Insert, Update, Delete) statements are performed in an autocommit transaction - they are committed as soon as the statement successfully completes. Which means there's no opportunity to roll back the database to the state prior to the statement having been run in cases like yours. When something goes wrong, the only restoration option available is to reconstruct the data from a backup (providing one exists). In MySQL, autocommit is on by default for InnoDB - MyISAM doesn't support transactions. It can be disabled by using:
SET autocommit = 0
An explicit transaction is when statement(s) are wrapped within an explicitly defined transaction code block - for MySQL, that's START TRANSACTION. It also requires an explicitly made COMMIT or ROLLBACK statement at the end of the transaction. Nested transactions is beyond the scope of this topic.
Implicit transactions are slightly different from explicit ones. Implicit transactions do not require explicity defining a transaction. However, like explicit transactions they require a COMMIT or ROLLBACK statement to be supplied.
Conclusion
Explicit transactions are the most ideal solution - they require a statement, COMMIT or ROLLBACK, to finalize the transaction, and what is happening is clearly stated for others to read should there be a need. Implicit transactions are OK if working with the database interactively, but COMMIT statements should only be specified once results have been tested & thoroughly determined to be valid.
That means you should use:
SET autocommit = 0;
START TRANSACTION;
UPDATE ...;
...and only use COMMIT; when the results are correct.
That said, UPDATE and DELETE statements typically only return the number of rows affected, not specific details. Convert such statements into SELECT statements & review the results to ensure correctness prior to attempting the UPDATE/DELETE statement.
Addendum
DDL (Data Definition Language) statements are automatically committed - they do not require a COMMIT statement. IE: Table, index, stored procedure, database, and view creation or alteration statements.
Sorry man, but the chances of restoring an overwritten MySQL database are usually close to zero. Different from deleting a file, overwriting a record actually and physically overwrites the existing data in most cases.
To be prepared if anything comes up here, you should stop your MySQL server, and make a copy of the physical directory containing the database so nothing can get overwritten further: A simple copy+paste of the data folder to a different location should do.
But don't get your hopes up - I think there's nothing that can be done really.
You may want to set up a frequent database backup for the future. There are many solutions around; one of the simplest, most reliable and easiest to automate (using at or cron in Linux, or the task scheduler in Windows) is MySQL's own mysqldump.
Sorry to say that, but there is no way to restore the old field values without a backup.
Don't shoot the messenger...
Do you have binlogs enabled? You can recover by accessing the binlogs.