I have a form that is linked to a table in Access. I have an additional field which displays the sum of a few fields in the table. This field on the form is not connected to the table. I have the sum displayed on the form but what I noticed is that the sum does not appear until I move away and navigate to another record and come back to the original record. I don't see the addition as soon as I enter values in the respective fields.
Can someone help with this issue?
It sounds like you need to add some code to the After Update events of the controls for the fields used in the sum. That code can call the .Refresh method of the control that performs the calculation and update the total.
Edit
Another possibility is that there could be ambiguity between control values and field values if they have the same name. In Design View for a report if you drag a field from the "Field List" and drop it into a report then Access creates a report control with the same name as the field. This can confuse matters later because if any expressions refer to =[SomeColumn] it's not clear whether that refers to the field or the control. Often simply renaming the controls to something like txtSomeColumn can help if a report is acting strangely.
Related
I have a form with a subform that lists current material information being entered on the main form, like a log/history view.
On the subform there is a field that specifies which skid the product was assigned. I made this field a hyperlink so that I could use the OnClick event to launch a report and be able to extract row information needed to generate the proper summary.
That works great, and I thought it was finished until I attempted to edit the skid number from within the subform.
Allowing edits in the subform is a project requirement. Editing the skid number in the hyperlinked field breaks my code. Access automatically appends #http://# to the end of whatever value I enter into the cell and updates the table with this string. That row then gets omitted from the report because I'm keying off of the skid numbers. By design, this hyperlink has no path or address, I just use it to determine which row is being clicked.
How can I prevent Access from appending the #http://# while keeping the "Is Hyperlink" property to Yes? Is there another property to set this behavior or should I use the AfterUpdate event to undo the addition, which just seems like a waste of resources?
I am running Access 2010.
There is a long and very thorough article here that I will not copy ;) It elaborately states why its a bad idea to even use the hyperlink-field and what to do to get the same result you need without a hyperlink-field.
Basically, the main point of the hyperlink-field is all that behind the scenes shenanigans you cannot do anything about - and thats not what you want as a programmer.
The Hyperlink-field internally consists of three parts: A Text-part, a Link-Part and a Tooltip-Part. And although you can access them separately, access always tries to create a link.
You can try to format the data you have in the internally used format (DisplayText#Address#SubAddress) but I think that is not what you need...
So I think you best take Philipps advice and change your field-type.
I have a checklist that is used to perform QC audits. When a reviewer answers a question that requires an exception, a pop-up form will open with the correct exception detail already populated. They then have to provide some further information, which I have set-up in the format of a combobox for a field named 'Condition_Detail.' Some exceptions have only one condition that would be an option in the drop-down whereas others have multiple possible conditions, which is why I don't have that field automatically populated as well. I have a table of possible exceptions and conditions that I have used to create the combobox query. When the database was created, the field the 'Condition_Detail' combobox is dependent on was labeled 'Exception Detail' with a space and in my new table it is called 'Exception_Detail.' I did this because the old data and tables will eventually become irrelevant and I know that it is easier to write code with underscores instead of spaces. I include this information because I had to create a relationship between those two fields in the combobox query so that the database would know they are the same. When I test the database, the form opens as expected with the exceptions already populated (NOT in combobox format - the data appears as text on the form). The issue is that when I select the combobox, it is blank. If I answer the exact same question the same way to trigger the same exception to open in a new record, the combobox does have the correct data in it. I have tried to requery the field both when the form loads and after it updates. It still won't show the combobox values unless I trigger that the form open twice with the same detail populated. An additional piece of information that likely doesn't affect the problem is that the combobox is set-up as three columns so that I can populate two additional fields when the condition detail has been updated. I used the code below to populate that, which works perfectly when I can get the condition detail to appear in the combobox:
Private Sub Condition_Details_Change()
Me.Responsible_Position.Value = Me.Condition_Details.Column(2)
Me.Severity_Description.Value = Me.Condition_Details.Column(3)
End Sub
Thanks in advance for your help!
I figured it out. The relationship I created within the combo box query was unnecessary. The query was searching for values in the table that stored the actual responses/conditions instead of the table that stored the available response options. Because of this, once I had answered the question it knew what to look for, but in the wrong place. Setting up the combo box the usual way with the look-up control value in the form referenced as follows was sufficient to get the combo box to work properly.
Field: Exception_Text
Table: tblPreCloseExceptionDescEnc
Criteria: [Forms]![frmEncompassExceptions].[Form]![Exception Text]
I am fairly new to Access. I am trying to create a filter pre-report form. On this form, the user will be asked for a start and end date. He will also be given a list of Item names which are found in a different form/table and will have the ability to check off which items the report should filter on.
Do I need to use a subform for this? I tried one out, but I can't see how to add checkboxes, it seems to just give me a list and I can't modify the subform.
What I really think I need to do is to populate a checkbox list with all of the items in the other table. How exactly would I do this (if its really the best solution)?
You can use a regular form for this. You do not need to bind it to a table. Just drop 2 textboxes on the form, and as many checkboxes as you feel you need.
The report will be based on a query, which in turn will be based on this form. All the fields will be brought into the query and will reference the controls on the form.
For instance, let's say you have 2 textboxes on the form; one called txtStartDate and one called txtEndDate. The form will be called frmReportFilter. In the query that's driving the report, pull in your date column and in the Criteria put >=Forms!frmReportFilter!txtStartDate. This will pull in all records where your date field is greater than or equal to whatever is in the Start Date textbox. The rest will be referenced similarly.
this has me pretty confused and I can't find the answer anywhere else so thought I'd post here to see if anyone can help!
I have a form in an Access 2007 database with a subform (sfSubform) embedded in it. The subform control's SourceObject is set to be another form (fForm). fForm's RecordSource starts out as a table.
At one point I want to change the data displayed in the subform to the result of a SQL statement, so I use
sfSubform.Form.RecordSource = strSQL.
This works fine. However, if I ouput the name of the RecordSource for fForm after making this change, it still gives the name of the table that I orginially set.
Does sfSubform.Form.RecordSource not change the source of fForm? Is it a copy of fForm that is embedded in the control?
Hope all that makes sense.
The sub-form and the form each have their own record source (or are unbound). That's the whole point, actually -- the ability to present two different data sets. Typically the two forms have related record sources and this relationship is declared using Master/Child Link, but that also is optional according to the need.
So no, changing one won't cause the other to be changed.
I have an Access database that is used to store basic info in a table such as first and last name. How would I go about adding the functionality to lookup by last name?
Is there a way to type in the last name and then hit like F12 or something like this? Can someone please point me in the right direction or provide me a link?
SELECT tblPatient.LName AS [Last], tblPatient.FName AS [First]
FROM tblPatient
WHERE (((tblPatient.LName)=[Enter Last Name]));
How do I tie this into my form now?
I'd suggest you create a form, with a textbox 'search' at the top, then either a listbox or subform below to display results.
The listbox record source would be:
SELECT tblPatient.LName, tblPatient.FName
FROM tblPatient
WHERE tblPatient.LName LIKE Forms!myForm!search & '*';
You can either add a Search button, which requeries the listbox, or do the requery via the Change event of the search textbox. The later may be slow if you have a large number of records; if that's the case, you could check that at least 3 (?) characters have been entered before calling the requery.
You just need to create a query in which you put =[?] as the "last name" value.
When you open that view, you'll be asked to type in a lookup value for that field.
Not sure if this is what you are trying to archieve, though...
This is probably a bit overkill for what you want to do, but I assume that you want to perform a search by last name. You should be able to glean the information you need from this article:
Build a search criteria form
http://www.everythingaccess.com/tutorials.asp?ID=Build-a-search-criteria-form
You can create queries in Access if the user you're targeting with the searchability has Access themselves.
From the main Access UI (assuming Access 2007), go to the Create tab and then select the "Query Wizard." Here is an article on the subject.
Otherwise you can create a program and connect to the MDB/ACCDB file running the query programmatically.
Seeing you wish to look up a name and populate the form based on the name selected, I suggest you need a combobox. There is even a wizard for doing exactly what you want. To start, you will need a form bound to a table or query, that is a form with a Record Source.
Add a combobox to your form
Select :
Find a record on my form based on the value I select in my combobox
Select the ID (primary key), Last and First name fields.
Access will display an example, suggesting that you hide the Key (id) column. Accept this.
Choose a name and finish.
There are a few other small things that could be done for neatness, but you will end up with a form that find the record you want. In addition, the combo will autocomplete if you type in a few letter.
If this is an mde, which your subsequent post seems to suggest it is, there is little you can do wuth out the original file. However, you could try opening the database while keeping the shift key held down and see if that allows you to edit. If you cannot get the original and the shift does not work, you could try rescuing the data, if it, too, is stored in this file.