I'm quite new to VBA and I've been looking around but cannot seem to find a solution to my problem.
I have made a navigation form (frmNavigation) with 3 buttons, each referring to a different form, let's call them frm1, frm2 and frm3. In the navigationform the control buttons to switch between tabs are all named differently (btn1, btn2, btn3), but the subform that shows either frm1, frm2, or frm3 has the same name: “NavigationSubform” (this shows a different form depending on which tab is clicked on, based on the 'navagation target name' referring to frm1, frm2 and frm3).
When I want to refer to a textbox (txtBox1) on form 1 (first tab) and insert a value i can do this by:
Forms!frmNavigation!NavigationSubform.Form!txtBox1.Value = "insert awesome text"
But how would I refer to txtbox10 on the second tab (frm2)? Just using the following does not work:
Forms!frmNavigation!NavigationSubform.Form!txtBox10.Value
You then get the error 2465 (can't find the field).
I’ve been trying many different things, but can’t seem to get it right. So how do I refer to a textbox on a different tab than the first one?
Help us much appreciated!
Only one subform can be loaded at once. So you've just got to break this process into two steps.
Store the value from txtBox1 somewhere outside of the NavigationSubforms (a textbox on the parent form with visible = no, a global variable or a table works).
In frm2's On Load event, set txtbox10 to be the value you stored.
Just note, that you will need to add conditions in the On Load event if you want to avoid that textbox being set to an empty string or a wrong value if you have a setup where your filter is changing.
I set up my TextBoxes to be close together:
Yet when the report is generated, they are barely in the same zip code:
How can I prevent this AWOListic behavior of the ExecutionTime (and, to a lesser extent, UserID) TextBoxes?
UPDATE
I'm sure the answer is correct, but getting it to work is another matter. When I right-click in the Textbox and select "", I am able to navigate to the Date format I want:
...but after I mash the "OK" button, I get:
So it's another case of non-intuitive/non-user-friendly software. I guess the Redmondians are standing in the bread line and can't afford to make it work as it should.
just use 1 text box, just right click inside textbox select "create placeholder"..
I would like to know if it is possible to open a combo box and see it's elements listed from another object on the form. I do not like the 'down arrow' on the combo box and would like to create something more 'stylish' if it is possible. I am wondering if there is a routine one could write and put on another object so that upon the 'on click' event, the user will see all the elements listed within the combo box and have the opportunity to select one of them.
For that you can use the Dropdown method of Combobox object.
Example:
Dim cmb1 As ComboBox: Set cmb1 = Me.Combo1
cmb1.SetFocus ' necessary
cmb1.Dropdown
Note: The control needs to have focus so you have to set it programmatically first.
I have a combo box on a form that is linked to a SharePoint field, the combo box populates correctly however I am having difficulty trying to add VBA code to select all of the options or to unselect all options.
With a standard combo box you can use:
cmbBox1.value = ""
and that will reset the field. The same thing can be done with a list box that has multi-select enabled however this tosses an error, "This control is read-only and cannot be modified", with the combo box that has multi-select because of the lookup.
I have done some searching however no one seems to have a real answer other than to use a listbox instead and that isn't a solution here.
Has anyone worked with one of these fields and know how to select all of the options using VBA?
Here is a link describing this type of field but it does not discuss how to interact with it using VBA - http://office.microsoft.com/en-us/access-help/use-a-list-that-stores-multiple-values-HA010031117.aspx.
UPDATE:
There has been some confusion about the type of field I was describing so I have added some screen captures to show the difference between a combo box that allows multiselect, a list box that allows multiple options and a combo box with the option added.
First the field I was describing:
Second the list box:
Lastly the combobox:
These images visualize the issue that was described. As you can see there are multiple check boxes that need to be selected or unselected. Normally I would not create a field like this but as described above this is how Access interprets a combobox from SharePoint that allows for multiple selections.
After a ton of searching and trial and error I figured it out.
To unselect all of the check boxes it is
cmbBox1.Value = Array()
So with this information I figured that to select items they have to be in an array. Creating an array with all of the items that are in the combo box and then setting the combo box equal to the array will select all of the items.
I used a basic loop to set each element of the array
Dim SelVals(), i
ReDim SelVals(0 to cmbBox1.ListCount - 1)
For i = 0 to cmbBox1.ListCount - 1
SelVals(i) = cmbBox1.Column(1,i)
Next i
cmbBox1.Value = SelVals
Obviously then you aren't limited to only using the entire contents - you could assign any array and those would be the values selected.
http://msdn.microsoft.com/en-us/library/office/aa140084(v=office.10).aspx
I beleive this covers what you are asking
One of the many quirks of Reporting Services we've run across is the complete and utter lack of a CheckBox control or even something remotely similar.
We have a form that should appear automatically filled out based on information pulled from a database. We have several bit datatype fields. Printing out "True" or "False" just looks silly, as this is supposed to look like a form that has been auto-filled out, so we want to have a series of checkboxes and labels that are either checked or unchecked.
We are running SSRS 2005 but I'm not aware of SSRS 2008 having added a CheckBox control. Even if it did, we'd need to have an alternative for the time being. The best we've found so far is:
use Wingdings
use images
use text boxes with borders and print a blank/space or a capital X
All three approaches require IIF expression shenanigans.
The Wingdings approach seemed to work acceptably, and was the most aesthetically pleasing except that for whatever reason it didn't always print correctly. More importantly, PDF exports, also for whatever reason, converted all fonts (generally) to Arial and so we got funky letters instead of the Windings dingbats.
Images, being a pixel-based raster, don't do so well when printed along side vector stuff like text. Unless handled carefully, they tend to stretch, pixelate, and do other unprofessional looking things.
While these methods do work (some with limitations as mentioned above) none of them are particularly elegant.
Are we missing something obvious? Not so obvious? Does someone at Microsoft have a good reason why such a control was not provided in SSRS 2000, let alone 2 versions and 8 years later? This can't be the first time this issue has come up...
I, along with others in my shop, have used images, toggling the hidden attribute based on the field value (true or false). We haven't had any problems with blurring or scaling, unless we tried to increase the scale of the image beyond 100% obviously.
Another option I've used is similar to the wingdings idea, but I just use a plain old "X". On our forms at least, it is not uncommon for someone to use an X in a box instead of a check mark, so it looks completely acceptable. Plus, you don't have to worry about strange characters when printing.
As for why Microsoft does not include a checkbox control, I can't answer that as I've been wondering the same thing myself for a long time now.
I just wanna share the idea on this blog. SSRS: How to Display Checkbox on Report
First create a textbox
Then change the font family to Wingdings
Insert an expression on the textbox and write this expressions.
=IIF(Fields!Active.Value,chr(254),"o")
Fields!Active.Value could be anything from your query that should return a boolean value 1 or 0.
Then click Preview and see the checkbox ;)
More styles can be selected on the blog that I shared above.
Here is an example of my output
What I have used to display a check box (or ballot box):
1- create textbox (that will become your check box)
2- change font to Arial Unicode MS
3- in the expression window use:
ChrW(&H2611) for a filled-in checkbox
ChrW(&H2610) for an empty checkbox
Besides the different methods already presented, as of SQL Server 2008 R2 there's a built-in control that can be used for checkbox-alike functionality: the Indicator!
Have a look here for details on how to use it: https://web.archive.org/web/20190916105459/http://blog.hoegaerden.be/2012/08/04/displaying-checkboxes-in-an-ssrs-report/
To be able to use a field of type bit, you'll have to cast it to int first. This can be done either in the dataset query or by adding a calculated field to the dataset.
If you want the NULLs to come up as yellow, then you'll need to build the expression that way so it takes that requirement into account as well.
Here's a possible expression for a calculated field:
=Switch(
IsNothing(Fields!YourBoolean.Value), 50,
Fields!YourBoolean.Value = False, 0,
Fields!YourBoolean.Value = True, 100)
Depending on the meaning of your fields - is False good or bad - you may need to swap the zero and 100.
Another way to do thisd is go to "Placeholder properties" of TextBox and check Html - Interpret HTML tag as styles
Then in the Value - Expression put this line of code for checked:
="<font face=""Wingdings 2"" color=""green"">" & Chr(81) &"</font>" & "some other text"
Or this code sample for unchecked:
="<font face=""Wingdings 2"" color=""red"">" & Chr(163) &"</font>" & "some other text"
This way you can have checkbox and text in the same textbox.
Later edit:
If you are having problem displaying Wingdings 2 on Azure, then use Wingdings.
Apparently it works.
="<font face=""Wingdings"" color=""green"">" & Chr(253) &"</font>" & "some other text"
Or this code sample for unchecked:
="<font face=""Wingdings"" color=""red"">" & Chr(168) &"</font>" & "some other text"
You can also use a string calculated field like "[X]" or "[ ]". It's less pretty than the textbox with border but you don't have to put a specific control for the value and you can fill table or matrix with this.
At least there is some solution for the checkbox. I'm still looking for full justification for my text (In fact I'm looking for another solution than SSRS know).
ACCESS 97 could make this kind of thing but not SQL SERVER 2012.
I think there is a bug with SSRS and embedding font characters above 128 (some thing todo with ANSI encoding). Basically you can use 1-128 fine, the rest show up as tall rectangular blocks.
I like NY's idea of the textbox with a border and an optional X - this sounds simple and effective.
This is building on Dragos Durlut's answer. I don't have a high enough reputation to comment but I can answer...
I needed a checkbox as part of text that is passed as a parameter. The parameter contains HTML and is used in a placeholder set up just like Dragos suggests: HTML - Interpret HTML tags as styles.
Instead of having to switch between the HTML and the strings, you can use the HTML Escape Codes (& + # + CharCode + ; --> ¨)
="<font face='Wingdings'>¨</font> Empty checkbox"
Since mine is a parameter, it just pass in the string:
<font face='Wingdings'>¨</font> Empty checkbox
If you need the checkbox selected, you would pass in either ý or þ instead:
<font face='Wingdings'>ý</font> filled with an x
<font face='Wingdings'>þ</font> filled with a checkmark