I am getting an error when I execute the query below and I could not figure out the problem. Can anyone please help?
SELECT shifts.consultant_uid AS consultant_uid, shifts.status AS
status , shifts.pay_roll_no AS pay_roll_no, shifts.week_ending AS week_ending, shifts.shifts_date AS shifts_date, shifts.description AS description, shifts.units AS units, shifts.pay_rate AS pay_rate, shifts.charge_rate AS charge_rate, shifts.pay_amount AS pay_amount, shifts.charge_amount AS charge_amount, shifts.margin_amount AS margin_amount, shifts.client_name AS client_name, consultant.user_name AS consultant_name,
FROM a_shifts AS shifts
LEFT JOIN a_users AS consultant ON shifts.consultant_uid = consultant.user_uid
WHERE 1
AND week_ending >= '2013-03-17'
AND week_ending <= '2013-03-24'
You have an extra comma at the end of your field list in the SELECT clause:
... consultant.user_name AS consultant_name,
As a general word of advice, usually the actual error indicates where in the query the error was encountered. In most cases, the location it indicates is just after the problem, because it's the first thing the query encountered which it was unable to parse (in this case, the FROM keyword) that generates the error.
Remove , before FROM clause
SELECT .........consultant.user_name AS consultant_name,
FROM
try this
SELECT shifts.consultant_uid AS consultant_uid, shifts.status AS
status , shifts.pay_roll_no AS pay_roll_no, shifts.week_ending AS week_ending, shifts.shifts_date AS shifts_date, shifts.description AS description, shifts.units AS units, shifts.pay_rate AS pay_rate, shifts.charge_rate AS charge_rate, shifts.pay_amount AS pay_amount, shifts.charge_amount AS charge_amount, shifts.margin_amount AS margin_amount, shifts.client_name AS client_name, consultant.user_name AS consultant_name
FROM a_shifts AS shifts
LEFT JOIN a_users AS consultant ON shifts.consultant_uid = consultant.user_uid
WHERE 1
AND week_ending >= '2013-03-17'
AND week_ending <= '2013-03-24'
Related
Hello I have this query that i am trying to execute and i keep getting this error "Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.", Kindly help please.
DECLARE #NUMCOUNT BIT
Select #NUMCOUNT = (SELECT
CASE WHEN
(SELECT COUNT(R5REQUISLINES.RQL_REQ)
WHERE R5REQUISLINES.RQL_STATUS IN ('A')
) IN
(SELECT COUNT(R5REQUISLINES.RQL_REQ)
WHERE R5REQUISLINES.RQL_STATUS IN ( 'A','C') ) THEN 1 else 0 END AS NUMCOUNT1
FROM R5REQUISLINES JOIN
R5REQUISITIONS ON R5REQUISLINES.RQL_REQ = R5REQUISITIONS.REQ_CODE
GROUP BY R5REQUISLINES.RQL_REQ, R5REQUISITIONS.REQ_CODE,R5REQUISLINES.RQL_STATUS
)
IF #NUMCOUNT = '1'
begin
UPDATE R5REQUISITIONS
SET R5REQUISITIONS.REQ_STATUS = 'CP'
end
Ok, it sounds like what you actually want to do is update R5REQUISITIONS when there is no RQL_STATUS = 'C' in R5REQUISLINES, since you said you want to count the records where the RQL_STATUS is A and where it's A or C, and then do the update if the counts are the same.. You can greatly simplify this task with the following query:
UPDATE r5
SET r5.REQ_STATUS = 'CP'
FROM R5REQUISITIONS r5
WHERE NOT EXISTS (SELECT 1 FROM R5REQUISLINES r5q WHERE r5q.RQL_REQ = r5.REQ_CODE AND r5q.RQL_STATUS = 'C')
Your 'SELECT CASE' is returning more than 1 record, so it can't be assigned to #NUMBER. Either fix the sub-query to only return the record your looking for or hack it to return only 1 with a 'LIMIT 1' qualification.
I don't know what your data looks like so I can't tell you why your case subquery returns more records than you think it should.
Try running this and see what it returns, that will probably tell you wall you need to know:
SELECT
CASE WHEN
(SELECT COUNT(R5REQUISLINES.RQL_REQ)
WHERE R5REQUISLINES.RQL_STATUS IN ('A')
) IN
(SELECT COUNT(R5REQUISLINES.RQL_REQ)
WHERE R5REQUISLINES.RQL_STATUS IN ( 'A','C')
)
THEN 1
ELSE 0
END AS NUMCOUNT1
FROM R5REQUISLINES JOIN
R5REQUISITIONS ON R5REQUISLINES.RQL_REQ = R5REQUISITIONS.REQ_CODE
GROUP BY R5REQUISLINES.RQL_REQ, R5REQUISITIONS.REQ_CODE,R5REQUISLINES.RQL_STATUS
If there is more than 1 row returned, that's where your problem is.
I'm looking for a way to order my results based on the actual time. In my table yo can see values like:
1,23:45
2,9:45
3,27:43
When I do a query I would like to know how to order them based on their actual 24 hour time.
Ex:
3,3:43
2,9:45
1,23:45
Notice how it changes 27:43 to 3:43, and creates the order.
Where I am using it, in this query:
SELECT *,COALESCE(ADDTIME(s.`departure_time`,SEC_TO_TIME(rt.delay)),s.`departure_time`) as `rt_time` FROM `stop_times` s INNER JOIN `trips` t ON s.`trip_id` = t.`trip_id` INNER JOIN `stops` st ON st.`stop_id` = s.`stop_id` INNER JOIN `routes` r ON r.`route_id` = t.`route_id` LEFT JOIN `rt_trips` rt ON t.`trip_id` = rt.`trip_id` where (s.`stop_id` = 'CB900') and ( ( s.`departure_time` >= '00:50' and s.`departure_time` <= '05:50') OR ( s.`departure_time` >= '24:50' and s.`departure_time` <= '29:50') ) and (s.`pickup_type` = '0') and (t.`service_id` IN ('removed to make it easier')) HAVING (`rt_time` BETWEEN '01:50' and '05:50' ) ) OR ( `rt_time` BETWEEN '25:50' and '29:50' ) ORDER BY `order` ASC
Explanation:
Information is a transit schedule, that may go forward onto the next day which may be a saturday. So, times may become 25:50, where that means 1:50 the next day.
Thanks
Cyrus
Hmmm, if you just want to get a value between 0 and 24 hours, then I would do:
select concat(mod(substring_index(time_column, ':', 1) + 0, 24), ':',
substring_index(time_column, ':', -1)
)
Try this function on the time_column
concat(mod(substr(time_column,1,INSTR(time_column, ':')-1),24)
,substr(time_column,INSTR(time_column, ':'),3)
)
You might need to cast date to string to integer, do the maths, and again cast it to time. But the fiddle version seems to work properly on varchar to integer conversion. Check this
http://sqlfiddle.com/#!9/ff60f9/1
trying to get the following to work, trying to make adjustment for timezone. If I comment out the line AND plan.resetHour=tzHour it shows the column tzHour correctly but can't seem to use the value in the where clause.
SELECT
`issuer`.`tz`
,`account`.`id`
, `plan`.`endDate`
, `plan`.`resetDay`
, `plan`.`resetHour`
, `plan`.`type`
, HOUR(NOW())
, CASE issuer.`tz`
WHEN 'US/Eastern' THEN HOUR(NOW())+1
WHEN 'US/Central' THEN HOUR(NOW())
ELSE HOUR(NOW())
END AS tzHour
FROM
`dvh`.`account`
INNER JOIN `dvh`.`plan`
ON (`account`.`plan` = `plan`.`id`)
INNER JOIN `dvh`.`issuer`
ON (`plan`.`issuer` = `issuer`.`id`)
WHERE plan.type='UNIT'
AND plan.startDate < NOW()
AND plan.endDate >NOW()
AND plan.resetDay=DAYOFWEEK(NOW())
AND plan.resetHour=tzHour
AND account.`active`=1;
Using a column alias in a WHERE clause is illegal. From MySQL docs:
Standard SQL disallows references to column aliases in a WHERE clause. This restriction is imposed because when the WHERE clause is evaluated, the column value may not yet have been determined.
http://dev.mysql.com/doc/refman/5.6/en/problems-with-alias.html
One way to go about this is to move the case into a sub-select.
SELECT
`issuer`.`tz`
,`account`.`id`
, `plan`.`endDate`
, `plan`.`resetDay`
, `plan`.`resetHour`
, `plan`.`type`
, HOUR(NOW())
, tempHour.tzHour
FROM
(
SELECT
CASE `tz`
WHEN 'US/Eastern' THEN HOUR(NOW())+1
WHEN 'US/Central' THEN HOUR(NOW())
ELSE HOUR(NOW())
END AS tzHour
FROM issuer
) AS tempHour,
`dvh`.`account`
INNER JOIN `dvh`.`plan`
ON (`account`.`plan` = `plan`.`id`)
INNER JOIN `dvh`.`issuer`
ON (`plan`.`issuer` = `issuer`.`id`)
WHERE plan.type='UNIT'
AND plan.startDate < NOW()
AND plan.endDate >NOW()
AND plan.resetDay=DAYOFWEEK(NOW())
AND plan.resetHour=tempHour.tzHour
AND account.`active`=1;
solved by moving case to where clause
AND plan.`resetHour` =
CASE
WHEN issuer.`tz`='US/Eastern' THEN HOUR(NOW())+1
WHEN issuer.`tz`='US/Central' THEN HOUR(NOW())
WHEN issuer.`tz`='US/Mountain' THEN HOUR(NOW())-1
WHEN issuer.`tz`='US/Pacific' THEN HOUR(NOW())-2
END
I am trying to use the following query in SQL Server
SELECT [AL].[Subscriptions].Id,
[AL].[Subscriptions].name,
[AL].[Subscriptions].description,
[AL].[Subscriptions].price,
[AL].[Subscriptions].iconFileName,
IIf(a.expiryDate > Now(), 'TRUE', 'FALSE') AS isSubsByUser
FROM [AL].[Subscriptions]
LEFT JOIN (SELECT *
FROM [AL].[UserSubscriptions]
WHERE userId = 13259) AS a
ON Subscriptions.Id = a.itemid;
but always get the error
Error in list of function arguments: '>' not recognized.
Unable to parse query text.
How do I resolve it?
Like Martin Smith said you need to use a case statement. Also it looks like you are only using a couple of fields in the derived table therefor I would suggest not using *. I put a example below.
SELECT [AL].[Subscriptions].Id,
[AL].[Subscriptions].name,
[AL].[Subscriptions].description,
[AL].[Subscriptions].price,
[AL].[Subscriptions].iconFileName,
case when a.expiryDate > GetDate() then 'TRUE' else 'FALSE' end AS isSubsByUser
FROM [AL].[Subscriptions]
LEFT JOIN (SELECT expiryDate, itemid
FROM [AL].[UserSubscriptions]
WHERE userId = 13259) AS a
ON Subscriptions.Id = a.itemid;
I've created this temporal table in my store procedure, as you can see I have more than 1 records for the same ID:
#tmpTableResults
TmpInstallerID TmpConfirmDate TmpConfirmLocalTime
============== ============== ===================
173 2011-11-08 11:45:50
278 2011-11-04 09:06:26
321 2011-11-08 13:21:35
321 2011-11-08 11:44:54
483 2011-11-08 11:32:00
483 2011-11-08 11:31:59
645 2011-11-04 10:03:15
645 2011-11-04 07:03:15
That is the result of the query to create #tmpTableResults
DECLARE #tmpTableResults TABLE
(
TmpInstallerID int,
TmpConfirmDate date,
TmpConfirmLocalTime time
)
DECLARE #tmpTableQuery VarChar(800)
SET #tmpTableQuery = 'select FxWorkorder.INSTALLERSYSID, FxWorkorder.CONFIRMDATE, FxWorkorder.CONFIRMLOCALTIME from FxWorkorder
join install on FxWorkorder.INSTALLERSYSID = install.sysid
join RouteGroupWorkarea on FxWorkorder.WORKAREAGROUPSYSID = RouteGroupWorkarea.IWORKAREA_ID
join RoutingGroup on RouteGroupWorkarea.IRG_ID = RoutingGroup.IRG_IDENTITY
where FxWorkorder.SCHEDULEDDATE > = #StartDate and FxWorkorder.SCHEDULEDDATE <= #EndDate
and FxWorkorder.Jobstatus <> "Unassign"
and FxWorkorder.Jobstatus <> "Route"
and install.FOXTELCODE <> ""
and FxWorkorder.CONFIRMLOCALTIME is not null
and FxWorkorder.CONFIRMDATE <> ""
group by FxWorkorder.INSTALLERSYSID, FxWorkorder.CONFIRMDATE, FxWorkorder.CONFIRMLOCALTIME
order by FxWorkorder.INSTALLERSYSID, FxWorkorder.CONFIRMDATE, FxWorkorder.CONFIRMLOCALTIME desc '
INSERT INTO #tmpTableResults EXEC(#tmpTableQuery)
I'm creating another query to get data from another table and only the first record from the temporal table for the same INSTALLERSYSID
SELECT RoutingGroup.SDESCRIPTION, FxWorkorder.INSTALLERSYSID, FxWorkOrder.JOBSTATUS, Install.FOXTELCODE,
install.NAME, FxWorkOrder.ScheduledDate,
count(*) as TotalJobs, COUNT(CONFIRMDATE) as ConfirmedJobs,
(select TmpInstallerID, TmpConfirmDate, TmpConfirmLocalTime from #tmpTableResults where TmpInstallerID = FxWorkorder.INSTALLERSYSID)
from FxWorkorder
join install on fxworkorder.INSTALLERSYSID = install.sysid
join RouteGroupWorkarea on FxWorkOrder.WORKAREAGROUPSYSID = RouteGroupWorkarea.IWORKAREA_ID
join RoutingGroup on RouteGroupWorkarea.IRG_ID = RoutingGroup.IRG_IDENTITY
where FxWorkorder.SCHEDULEDDATE > = #StartDate and FxWorkorder.SCHEDULEDDATE <= #EndDate
and FxWorkOrder.Jobstatus <> 'Unassign'
and FxWorkOrder.Jobstatus <> 'Route'
and Install.FOXTELCODE <> ''
group by RoutingGroup.SDESCRIPTION,FxWorkOrder.INSTALLERSYSID, FxWorkOrder.JOBSTATUS, Install.FOXTELCODE,install.NAME, FxWorkOrder.ScheduledDate,FxWorkOrder.WORKAREAGROUPSYSID
When I tried to save the sp I got the error
"Only one expression can be specified in the select list when the subquery is not introduced with EXISTS."
I can't see why I got this error. But if I run the query in sql that works. Can someone see the error?
I don't know how your second query works for you ‘in sql’ (where is that supposed to be? do you mean SSMS = SQL Server Management Studio?), but I'm sure it cannot possibly work in any version of SQL Server that exists at the moment. It's because of this subquery in the SELECT list:
(select TmpInstallerID, TmpConfirmDate, TmpConfirmLocalTime from #tmpTableResults where TmpInstallerID = FxWorkorder.INSTALLERSYSID)
The thing is, every expression in the SELECT clause should be scalar, but this subquery returns a row of more than one value. Even if it's only one row, it is illegal there, because it returns several columns. The subquery in that context should return no more than one value, i.e. it should be one column and the result produced should contain either no rows or just one.
You could try this query instead (although I'm not entirely sure without knowing more details about your schema):
SELECT
RoutingGroup.SDESCRIPTION,
FxWorkorder.INSTALLERSYSID,
FxWorkOrder.JOBSTATUS,
Install.FOXTELCODE,
install.NAME, FxWorkOrder.ScheduledDate,
count(*) as TotalJobs, COUNT(CONFIRMDATE) as ConfirmedJobs,
tmp.TmpInstallerID,
tmp.TmpConfirmDate,
tmp.TmpConfirmLocalTime
from FxWorkorder
join install on fxworkorder.INSTALLERSYSID = install.sysid
join RouteGroupWorkarea on FxWorkOrder.WORKAREAGROUPSYSID = RouteGroupWorkarea.IWORKAREA_ID
join RoutingGroup on RouteGroupWorkarea.IRG_ID = RoutingGroup.IRG_IDENTITY
join #tmpTableResults tmp ON tmp.TmpInstallerID = FxWorkorder.INSTALLERSYSID
where FxWorkorder.SCHEDULEDDATE > = #StartDate
and FxWorkorder.SCHEDULEDDATE <= #EndDate
and FxWorkOrder.Jobstatus <> 'Unassign'
and FxWorkOrder.Jobstatus <> 'Route'
and Install.FOXTELCODE <> ''
group by
RoutingGroup.SDESCRIPTION,
FxWorkOrder.INSTALLERSYSID,
FxWorkOrder.JOBSTATUS,
Install.FOXTELCODE,install.NAME,
FxWorkOrder.ScheduledDate,
FxWorkOrder.WORKAREAGROUPSYSID
tmp.TmpInstallerID,
tmp.TmpConfirmDate,
tmp.TmpConfirmLocalTime
That is, I added one more join, the one to #tmpTableResults, as well as added the columns you were trying to pull to the SELECT clause and to the GROUP BY clause.
Also, if I were you I would consider using short aliases for tables, like this:
SELECT
…
wo.INSTALLERSYSID,
wo.JOBSTATUS,
…
from FxWorkorder wo
join …
That might make your queries more readable.