With the admin user I can do everything, add, delete, modify, etc. As it should be.
Then using this user added a new one, with full access to sales and accounting options as some other ones needed for sales operations. Then tried to add a new supplier and it throws a warning:
Access Denied
The requested operation cannot be completed due to security restrictions.
Please contact your system administrator.
(Document type: Pricelist, Operation: read)
Tested all the possible combinations on user rights and ended up giving full access to all options. Nevertheless I'm unable to create any new contact/customer/supplier/etc with this user. I'm running out of options, I don't know what else to test or where to look.
EDIT
Got an answer on the brand new OpenERP discussion site recommending to uncheck the Portal user rights for the user. Uncheking it partially worked. The warning still appears but when I click OK, fill the supplier and save, the new supplier is added without errors. Any recommendation?
I really think that's not a bug.
it's a conflict of "Rights" (in Access rules and ACL).
A "Portal or Anonymous" user, is an external user (from the company) and have only some limited rights for accessing some public informations or it can be an exteranl partner which can access his private documents and informations related to his relation with this company.
A normal OpenERP user (a company employee with some or all rights "let's call it an internal user") can't be and should not be in the same time a "Portal or Anonymous" user (with very limited rights), and vice-versa.
Just uncheck these two options for an internal OpenERP user.
Is a reported bug that seems to be related to multi-company option selection and user rights.
Go to multi company Access Denied Document type: Partner, Operation: read where the bug was reported and is followed up by other users. Hope a patch is created soon.
I agree, I don't think that's a bug.
I got that error with a user when I created an employee linked to this user.
You have to be at least an employee from the society to add a new client.
Link to create a new employee :
http://yoururl:PORT/?ts=1369948181483#view_type=kanban&model=hr.employee&menu_id=273&action=328
I got the error when I granted Portal rights to a contact/customer, then when a Quotation is sent (testing), opeing the Quotation yields the error message:
Access Denied
The requested operation cannot be completed due to security
restrictions. Please contact your system administrator.
(Document type: Partner, Operation: read)
However, clicking OK, can get past it and proceed to pay. This is a major ongoing sort of issue with OPENERP. It should be fixed by now...
I just faced a similar problem, may solution was to add a record rule for the Administration / Settings group, here is how:
1- Go to Settings->Groups and select Administration / Settings. (Make sure this group is assigned to de new user)
2- Click the Edit button and go to the Rules tab. (It should be empty)
3- Click the Add button, this action open a modal window, click the Create button on it.
4- Give the new rule a semantic name - e.g. Partner: administration settings: see all - and make sure all the access rights are selected.
5- In the object drop down type res.partner, it will allow you to select the object named Partner referenced in the error.
6- Click the Add button in the Groups section and select the Administration / Settings group.
7- Finally click the Save & Close button and save the group changes by clicking the Save button.
Hope this is helpful for beginners in OpenERP. Actually I already have used this solution patter more than once for similar error related to permissions a given user was expected to have.
Its a rules issue. Deactivate the rule Product Template . Rules overrule access writes setup under the user setup. So it looks like users have identical access but these rules bypass your customisations.
i think you should active developer mode, and go to setting/user -> select the user have this error. Then click edit and uncheck public in "Other Extra Rights" section. After that, click save.
Related
I want to allow user to update data from form, but not from direct table. I added Before Change event on table, and raising error if the user group is 'basic'. This is working as expected if I enter data in table. But, it is also raising error even if saving data from form. Can anyone help me to resolve this issue?
Thanks in advance!
In general the way to deal with permissions in Access is to only ever show your users the forms; they should never directly interact with a table or query. So instead of adding Before Change code to your table, you instead want to hide the table.
The things you need are in the Current Database section of the Access options. For this example I'll assume you just have the one form, but the same applies if you have many forms and a "Home" form.
Use the "Display Form" dropdown to select the form you want the user to see when they open the application.
Un-check "Use Access Special Keys" to prevent keyboard shortcuts showing objects you don't want shown.
Un-check "Display Navigation Pane" to hide the object list.
Un-check "Allow Full Menus" to prevent users from creating new objects (or use other database development functions)
With this done, the user will see only the form interface you selected and the basic data entry toolbar.
Note that when you want to make changes to the file as a developer you must hold down Shift when opening the application, which will display the navigation pane etc. Of course, any user who knows about the Shift override could do the same. Which is why distributing in a compiled accde, which cannot be unlocked, is a good idea. But you need to set up the application using the above options before that matters.
hi i am working on SSRS report and all my reports are deployed in server with all the user permission but not sure why permission is not working sometimes when new user is providing permission.
as per my knowledge i know that i can set permission with 3 different ways.
1. Site level
2. folder Level
3. Report Level
when ever a new user need permisson to view the report, i follows the below.
Step: 1 opened the Reportmanager URL(http://toshiba-pc/MyReports) and click Home
Step : 2 clicking on "Folder Settings"
Step 3: Click on "New Role Assignment" and enter the domainname\TestUser with "Browser" role and click ok and TestUser user is automatically adding into all the folder
problem : some of user is not appearing into all folders some of the user is appearing into all folders.
to avoid above problem, i added DomainName\TestUser into folder security and it's again not appearing for all reports security , so again i have to add this user into the reports where use has not added.
this is very difficult to go each report to check whether reports has permission or not?
is there anything i am missing to configure , please let me know.
do i need to set role(system user, system administrator) for all the users to site setting. i never add user into site setting..
Please any one let me know what i am missing to configure.
Thanks
By default all permissions cascade to every item contained within the folder. This means that providing someone Browser access on the Home folder will give them Browser access to everything on the site.
This inheritance stops if at any point you have individually changed the security context of any item in the Report Manager. If you have ever done this, you will see the option to Revert to Parent Security when looking at that item's security settings:
Clicking this will remove the custom security context on that item and reset it to match the security context of the containing folder.
To find all items that have a security context different to that of your home directory so you can change them in the Report Manager (You can change this in the ReportServer database, but you run the risk of breaking your entire reporting catalogue and Microsoft will offer you no support for editing the database directly) run this query on the server which holds your ReportServer database:
select *
from ReportServer.dbo.Catalog
where PolicyID not in(select PolicyID
from ReportServer.dbo.Catalog
where Path = '' -- Home Path
and Name = '' -- Home Folder
)
I suspect this is a simple/silly/trivial problem - but I've spent ages without finding a solution.
I have a vanilla MediaWiki instance - a few months old - on an Ubuntu server recently upgraded to 14.04. There is a single "user" - this user is in the "administrator" and "bureaucrat" groups when I look at the "User rights management" special page.
I need to rename some pages... I understand, from the FAQ, that I need to use the "Move" tab - and know that this tab is only shown for logged-in users. (The wiki is configured not to require users to be logged in to do edits.... I don't really need/want any access control.)
Even when logged in, I don't see a "Move" tab... Please can someone give me a hint - What am I doing wrong?
In the Vector skin, the Move tab is by default collapsed into a More tab. Depending on the version of your installation, that might only be an easy-to-overlook triangle:
^^^^
I created new user - 'exampleuser' and new role - 'examplerole' in JasperReports Server version 5.6.
The new user - 'exampleuser' has 2 roles: 'examplerole' and 'ROLE_USER' that is attached to the user by default in the JR Server.
For every folder in jasper I gave the 'examplerole' and 'ROLE_USER' the permissions - Execute only.
According to my understanding, if I will login with the 'exampleuser' user I won't be able to see any folder, of course not be able to delete any file inside that folder.
What actually happens is that I'm able to see all the files inside any folder, add and delete files as I wish and change permissions to the files.
Could not find any information about it - according to the JasperReports Server manual I'm not doing anything wrong or do I?
The 'exampleuser' doesn't have any permissions to the folder e.g. 'NO ACCESS' permission.
And there were no errors in the logs.
Is someone ran into this situation before? Is it fixable or it is some bug of JasperReports Server?
-----------------------------EDIT---------------------------------------
I've found out that this situation happens only in Google chrome browser. If I use IE for example, everything is as it should be.
Anyone? Any idea?
Edit user(exampleuser) and assign only new role(examplerole) which you created for new user remove ROLE_USER and save.
Now right click on the folder on which you want to give permission to new user(exampleuser) and select "Permission" , there you can see all the roles and there access permission.
Change permission No Access to Read only for examplerole and remove the access form other roles i.e. select No Access option.
Now after that you need to check remaining other directories whether they have ROLE_USER access or not , if they have remove permission from ROLE USER i.e set it to No Access.
I'm trying to configure a Bugzilla instance, which will allow my clients to login, and file bugs for their website under development/maintenance.
For e.g: I have created 2 products called "TestProject", "TestProject2" and a user called "TestClient". What I'm trying to achieve is when TestClient logs in, he can only see TestProject, TestProject2 and only add/modify bugs in there.
TestProject, TestProject2 should not be listed for any other client.
I believe this has do with granular controls in the 'Groups' administration section, however I'm unable to figure it out.
Thanks
You are on the right track. This is the process I use and it works well for me.
Create a group for each of you clients.
Create or edit the product the client will use.
On the edit products page click "Edit Group Access Controls"
Select the following for the Group you want to have access
Enable entry, member control = mandatory, other control = mandatory, enable can edit.
Create a user and add them as a member of the new group.
To use this method all bugs have to be associated with a group like this or the users would see their bugs and any non group specific tickets.