MYSQL loop shows only first record - mysql

I'm trying to create a procedure with a loop inside, but when i call it just show the first record and dont interate.
delimiter //
create procedure load_foo_test_data()
begin
declare v_max int unsigned default 10;
declare v_counter int unsigned default 1;
select COUNT(*) into v_max FROM emp;
start transaction;
while v_counter < v_max do
select * from emp where emp_id = v_counter;
set v_counter=v_counter+1;
end while;
commit;
end
//
delimiter ;
when i call the procedure, it shows me just the first record (with ID 1).
I tried with "select v_counter" and only shows 1 too.
and tried with loop instead while and same thing.
i'm working with sequel pro in mysql 5.5
Thanks!


I think you should use
while ( ) {
// do this
}


Try to use
SET v_counter = 0;
REPEAT
IF v_counter < v_max do THEN
select * from emp where emp_id = v_counter;
set v_counter=v_counter+1;
END IF;
UNTIL v_counter END REPEAT;

Related

MySQL Set Variables in While-Loop with If-Condition

I am working on a procedure which is doing the following:
With a cursor declared I want to go through all entries of a table to find entries where the given period is covering the one from the cursor.
Example: a student A went to school at grade x from date 3 to date 6. Let's find all who studied with him at least one time for the same class.
The while-loop would be applied to the same table. But I want to just find out if there is at least one entry or not. So the while loop should stop if the first entry appears.
Example: A student B could have visited the same class as A did. But for a year he has been in another class. Just for example.
And here is my problem. I have two variables to set and I get a syntax error.
DELIMITER $$
DROP PROCEDURE IF EXISTS coworkers$$
CREATE PROCEDURE coworkers(
IN gus INT,
IN rus INT,
OUT gto INT
)
BEGIN
DECLARE recCID INT;
DECLARE recSDT DATE;
DECLARE recEDT DATE;
DECLARE done INT DEFAULT FALSE;
DECLARE ctr INT;
DECLARE cwrk CURSOR FOR
SELECT comp_id, start_date, end_date FROM skill_cv_test WHERE usr_id = rus;
DECLARE CONTINUE HANDLER
FOR NOT FOUND
SET done = TRUE;
OPEN cwrk;
SET ctr = 0;
loop_cwrk: WHILE(ctr<1) DO
FETCH cwrk INTO recCID, recSDT, recEDT;
IF EXISTS
(SELECT *
FROM skill_cv_test AS m
WHERE m.usr_Id = gus AND m.usr_id != rus AND (m.start_date < recSDT OR m.end_date <= recEDT) AND m.comp_id = recCID)
THEN
SET ctr = 1,
SET gto = 1;
IF done THEN
LEAVE loop_cwrk;
END IF;
END WHILE loop_cwrk;
CLOSE cwrk;
end $$
delimiter ;
CALL coworkers(2,1,#gto);
I have tried different formats for the section THEN SET... which is the problem.
Here is the error code:
You have an error in your SQL syntax; check the manual that
corresponds to your MySQL server version for the right syntax to use
near ''ctr' := 1,
SET 'gto' ;= 1;
Here you can see what else I have tried (among others). Probably it's a totally wrong approach.
Btw: the Select within the loop is only a placeholder to get the whole procedure work.
But now, what am I doing wrong?
Thanks in advance.
SOLUTION
DELIMITER $$
DROP PROCEDURE IF EXISTS coworkers$$
CREATE PROCEDURE coworkers(
IN gus INT,
IN rus INT,
OUT gto INT
)
BEGIN
DECLARE recCID INT;
DECLARE recSDT DATE;
DECLARE recEDT DATE;
DECLARE done INT DEFAULT FALSE;
DECLARE ctr INT;
DECLARE cwrk CURSOR FOR
SELECT comp_id, start_date, end_date FROM skill_cv_test WHERE usr_id = rus;
DECLARE CONTINUE HANDLER
FOR NOT FOUND
SET done = TRUE;
OPEN cwrk;
SET ctr = 0;
loop_cwrk: WHILE(ctr<1) DO
FETCH cwrk INTO recCID, recSDT, recEDT;
IF EXISTS
(SELECT *
FROM skill_cv_test AS m
WHERE m.usr_Id = gus AND m.usr_id != rus AND (m.start_date < recSDT
OR m.end_date <= recEDT) AND m.comp_id = recCID)
THEN
SET ctr = 1;
SET gto = 1;
END IF;
IF done THEN
LEAVE loop_cwrk;
END IF;
END WHILE loop_cwrk;
CLOSE cwrk;
end $$
delimiter ;
CALL coworkers(2,1,#gto);

You need add END IF for your first IF
IF EXISTS
(SELECT *
FROM skill_cv_test AS m
WHERE m.usr_Id = gus AND m.usr_id != rus AND (m.start_date < recSDT
OR m.end_date <= recEDT) AND m.comp_id = recCID)
THEN
SET ctr = 1;
SET gto = 1;
END IF; -- Add END IF here
IF done THEN
LEAVE loop_cwrk;
END IF;

Return empty table after rollback

Im writing a procedure, I want it to return table if there wasnt any rollbacks, and return empty table / nothing if there was at least 1 rollback.
DELIMITER $$
CREATE PROCEDURE payment(IN amount int, IN profession varchar(50))
BEGIN
DECLARE done BOOL DEFAULT FALSE;
DECLARE salary INT;
DECLARE pes VARCHAR(11);
DECLARE summary INT DEFAULT 0;
DECLARE employee_cursor CURSOR FOR (SELECT RIGHT(PESEL,3), pensja FROM Pracownicy WHERE zawod=profession);
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = TRUE;
DROP TEMPORARY TABLE IF EXISTS tmp1;
CREATE TEMPORARY TABLE tmp1(pesel char(11), status varchar(20) DEFAULT 'wyplacono');
SET AUTOCOMMIT =0;
START TRANSACTION;
OPEN employee_cursor;
readLoop : LOOP
FETCH employee_cursor INTO pes,salary;
IF done THEN
LEAVE readLoop;
END IF;
SET summary = summary + salary;
IF( summary > amount ) THEN
ROLLBACK;
END IF;
INSERT INTO tmp1(pesel) VALUES(CONCAT('********',pes));
END LOOP;
CLOSE employee_cursor;
COMMIT;
SELECT * from tmp1;
END $$
DELIMITER ;
As far it works fine when it doesnt rollback, but
INSERT INTO tmp1(pesel) VALUES(CONCAT('********',pes));
seems to ignore transaction :/

move the rollback test to outside the loop.

Select into multiple varibales with MySQL

I need to write a stored procedure using mysql.
In the repeat loop showing below, if I use something as:
SET VDATEI=(SELECT A.DATEI FROM STAFF_CONVENIOS A WHERE
A.CONV_ID=CONVE AND A.STAFF_ID=MED LIMIT 1);
the stored procedure works well and I get a result set.
But, I need select into multiple variables. Something as:
SELECT
A.DATEI, A.DIAI, A.HORAI
INTO
VDATEI, VDIAI, VHORAI
FROM
STAFF_CONVENIOS A
WHERE
A.CONV_ID = CONVE AND A.STAFF_ID = MED
LIMIT 1;
In this case my stored procedure is broken I get no result set.
How to use select into to multiple variables into stored procedure with temporary tables?
My stored procedure is similar to:
CREATE PROCEDURE P_GETHORARIOS(
IN `MED` BIGINT,
IN `DATAREF` DATE,
IN `ESPEC` BIGINT,
IN `CONVE` BIGINT
)
BEGIN
DECLARE BDONE,BTEMP, BOCUP INT;
DECLARE DIA;
DECLARE VDIA,OK TINYINT;
DECLARE VDURACAO TINYINT;
DECLARE VDATEI DATE;
DECLARE VDIAI TINYINT;
DECLARE VHORAI TIME;
DECLARE VHORA, VHORAI,VHORAF TIME;
DECLARE CURS CURSOR FOR SELECT DIA,COALESCE(A.DURACAO,30) AS DURACAO, A.HINI FROM STAFF_ESCALA A
WHERE A.DIA=DIA;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET BDONE = 1;
DROP TEMPORARY TABLE IF EXISTS TBLRESULTS;
CREATE TEMPORARY TABLE IF NOT EXISTS TBLRESULTS (
DATA_AG DATE,
DIA TINYINT,
HORA TIME );
SET DIA=DAYOFWEEK(DATAREF);
OPEN CURS;
SET BDONE = 0;
REPEAT
SET OK=TRUE;
FETCH CURS INTO VDIA,VDURACAO,VHORAI;
-- SET VDATEI=(SELECT A.DATEI FROM STAFF_CONVENIOS A WHERE A.CONV_ID=CONVE AND A.STAFF_ID=MED LIMIT 1);
SELECT A.DATEI, A.DIAI,A.HORAI INTO VDATEI, VDIAI,VHORAI FROM STAFF_CONVENIOS A WHERE A.CONV_ID=CONVE AND A.STAFF_ID=MED LIMIT 1;
SET BTEMP=IF(VDATEI IS NULL,TRUE,FALSE);
SET OK=OK AND BTEMP ;
IF (OK) THEN
INSERT INTO TBLRESULTS VALUES (DATAREF,VDIA,VHORA);
ELSE INSERT INTO TBLRESULTS VALUES (VDATEI,VDIAI,VHORAI);
END IF;
UNTIL BDONE END REPEAT;
CLOSE CURS;
SELECT A.* FROM TBLRESULTS;
END
I have posted a sample of my problem. Here is the real stored procedure:
CREATE DEFINER=`SYSDBA`#`%` PROCEDURE `P_GETHORARIOS`(
IN `MED` BIGINT,
IN `DATAREF` DATE,
IN `ESPEC` BIGINT,
IN `CONVE` BIGINT
)
LANGUAGE SQL
NOT DETERMINISTIC
MODIFIES SQL DATA
SQL SECURITY DEFINER
COMMENT ''
BEGIN
DECLARE BDONE INT;
DECLARE BTEMP TINYINT;
DECLARE BOCUP TINYINT;
DECLARE DIA BIGINT;
DECLARE VDIA TINYINT;
DECLARE VDURACAO TINYINT;
DECLARE VHORA, VHORAI,VHORAF TIME;
DECLARE VMED_ID BIGINT;
DECLARE VESPEC_ID BIGINT;
DECLARE VCONV_ID BIGINT;
DECLARE OK TINYINT;
DECLARE VNOMEESPEC,VNOMEMED VARCHAR(100);
DECLARE CURS CURSOR FOR SELECT DIA,COALESCE(A.DURACAO,30) AS DURACAO, A.HINI, A.HFIM, A.STAFF_ID,B.NOME AS NOMESTAFF, A.ESPEC_ID,C.NOME AS NOMEESPEC
FROM STAFF_ESCALA A
LEFT JOIN STAFF B ON B.ID=A.STAFF_ID
LEFT JOIN ESPECIALIDADES C ON C.ID=A.ESPEC_ID
WHERE A.DIA=DIA;
-- DECLARE CURS CURSOR FOR SELECT HINI, HFIM FROM STAFF_ESCALA;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET BDONE = 1;
DROP TEMPORARY TABLE IF EXISTS TBLRESULTS;
CREATE TEMPORARY TABLE IF NOT EXISTS TBLRESULTS (
DATA_AG DATE,
DIA TINYINT,
HORA TIME,
MED_ID BIGINT,
NOME_MED VARCHAR(100),
ESPEC_ID BIGINT,
NOME_ESPEC VARCHAR(100)
);
SET DIA=DAYOFWEEK(DATAREF);
OPEN CURS;
SET BDONE = 0;
REPEAT
SET OK=TRUE;
FETCH CURS INTO VDIA,VDURACAO,VHORAI,VHORAF,VMED_ID,VNOMEMED,VESPEC_ID,VNOMEESPEC;
IF (MED IS NOT NULL) THEN
SET OK=IF(MED=VMED_ID,TRUE,FALSE) ;
END IF;
IF (ESPEC IS NOT NULL) THEN
SET OK=OK AND IF(ESPEC=VESPEC_ID,TRUE,FALSE) ;
END IF;
IF (CONVE IS NOT NULL) THEN
-- SET #EOK=(SELECT 1 FROM STAFF_CONVENIOS A WHERE A.CONV_ID=CONVE AND A.STAFF_ID=MED LIMIT 1);
SELECT 1 INTO #EOK FROM STAFF_CONVENIOS A WHERE A.CONV_ID=CONVE AND A.STAFF_ID=MED LIMIT 1;
SET BTEMP=IF(#EOK IS NULL,TRUE,FALSE);
SET OK= OK AND BTEMP ;
END IF;
IF (OK) THEN
SET VHORA=VHORAI;
IF (VDURACAO IS NULL) THEN
SET VDURACAO=30;
END IF;
WHILE (VHORA <= VHORAF) DO
SET BOCUP=(SELECT 1 FROM AGENDA_STAFF A WHERE A.DATA_MARCADA=DATAREF AND A.HORA_MARCADA=VHORA);
IF (BOCUP IS NULL) THEN
INSERT INTO TBLRESULTS VALUES (DATAREF,VDIA,VHORA,VMED_ID,VNOMEMED,VESPEC_ID,VNOMEESPEC);
END IF;
SET VHORA=ADDTIME(VHORA, VDURACAO * 100);
END WHILE;
SET VHORA=ADDTIME(VHORA, VDURACAO * (-100));
IF (VHORA < VHORAF) THEN
SET VHORA=VHORAF;
SET BOCUP=(SELECT 1 FROM AGENDA_STAFF A WHERE A.DATA_MARCADA=DATAREF AND A.HORA_MARCADA=VHORA);
IF (BOCUP IS NULL) THEN
INSERT INTO TBLRESULTS VALUES (DATAREF,VDIA,VHORA,VMED_ID,VNOMEMED,VESPEC_ID,VNOMEESPEC);
END IF;
END IF;
END IF;
UNTIL BDONE END REPEAT;
CLOSE CURS;
SELECT A.* FROM TBLRESULTS A LEFT JOIN AGENDA_STAFF B ON B.STAFF_ID=A.MED_ID AND B.HORA_MARCADA=A.HORA AND B.DATA_MARCADA=A.DATA_AG;
END
//
The problem is with the lines:
-- SET #EOK=(SELECT 1 FROM STAFF_CONVENIOS A WHERE A.CONV_ID=CONVE AND A.STAFF_ID=MED LIMIT 1);
SELECT 1 INTO #EOK FROM STAFF_CONVENIOS A WHERE A.CONV_ID=CONVE AND A.STAFF_ID=MED LIMIT 1;
If I use "SET #EOK..." all works well.
If I use SELECT 1 INTO #EOK.. the problem appears.
More info with data
Expected result from call p_gethorarios(7,'2017-11-20',47,21)
"data_ag";"dia";"hora";"med_id";"nome_med";"espec_id";"nome_espec"
"2017-11-20";"2";"08:30:00";"7";"Paulo Renato Scofano";"47";"Pediatria/Neonatologia"
"2017-11-20";"2";"09:00:00";"7";"Paulo Renato Scofano";"47";"Pediatria/Neonatologia"
"2017-11-20";"2";"09:30:00";"7";"Paulo Renato Scofano";"47";"Pediatria/Neonatologia"
"2017-11-20";"2";"10:00:00";"7";"Paulo Renato Scofano";"47";"Pediatria/Neonatologia"
"2017-11-20";"2";"08:30:00";"7";"Paulo Renato Scofano";"47";"Pediatria/Neonatologia"
"2017-11-20";"2";"09:00:00";"7";"Paulo Renato Scofano";"47";"Pediatria/Neonatologia"
"2017-11-20";"2";"09:30:00";"7";"Paulo Renato Scofano";"47";"Pediatria/Neonatologia"
"2017-11-20";"2";"10:00:00";"7";"Paulo Renato Scofano";"47";"Pediatria/Neonatologia"
STAFF-ESCALA TABLE
ID;STAFF_ID;DIA;HINI;HFIM;ESPEC_ID;DURACAO;CREATION_TIME;MODIFICATION_TIME;LAST_USER_MODIF
25;7;2;08:00:00;10:00:00;50;;18/11/2017 21:44:02;;1
26;7;6;08:00:00;10:00:00;50;;18/11/2017 21:55:27;;1
27;7;4;08:00:00;10:00:00;50;;18/11/2017 21:55:27;;1
28;7;5;08:00:00;10:00:00;50;;18/11/2017 21:56:36;;1
35;7;3;08:00:00;10:00:00;47;;19/11/2017 19:10:29;;1
36;7;5;08:00:00;10:00:00;47;;19/11/2017 19:10:29;;1
38;7;2;08:00:00;10:00:00;47;;19/11/2017 19:10:29;;1

You may have to use user/session variables (the #xyz kind). The documentation does not explicitly state such, but it only shows examples with them.
https://dev.mysql.com/doc/refman/5.7/en/select-into.html
If it is an issue with the NOT FOUND handler getting triggered from something other than the cursor, you could try structuring your code something like this (very pseudocode):
FETCH
WHILE( NOT DONE )
BEGIN
DO STUFF
SET DONE = FALSE
FETCH
END

how to do a split on a sql table column

I have a table that stores some comma separated strings. Is there a way to write a sql to
return me a separate rows for each token string obtained by splitting across commas.

You can simply write and call a stored procedure
DELIMITER $$
DROP PROCEDURE IF EXISTS explode_table $$
CREATE PROCEDURE explode_table(bound VARCHAR(255))
BEGIN
DECLARE id INT DEFAULT 0;
DECLARE value TEXT;
DECLARE occurance INT DEFAULT 0;
DECLARE i INT DEFAULT 0;
DECLARE splitted_value INT;
DECLARE done INT DEFAULT 0;
DECLARE cur1 CURSOR FOR SELECT table1.id, table1.value
FROM table1
WHERE table1.value != '';
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = 1;
DROP TEMPORARY TABLE IF EXISTS table2;
CREATE TEMPORARY TABLE table2(
`id` INT NOT NULL,
`value` VARCHAR(255) NOT NULL
) ENGINE=Memory;
OPEN cur1;
read_loop: LOOP
FETCH cur1 INTO id, value;
IF done THEN
LEAVE read_loop;
END IF;
SET occurance = (SELECT LENGTH(value)
- LENGTH(REPLACE(value, bound, ''))
+1);
SET i=1;
WHILE i <= occurance DO
SET splitted_value =
(SELECT REPLACE(SUBSTRING(SUBSTRING_INDEX(value, bound, i),
LENGTH(SUBSTRING_INDEX(value, bound, i - 1)) + 1), ',', ''));
INSERT INTO table2 VALUES (id, splitted_value);
SET i = i + 1;
END WHILE;
END LOOP;
SELECT * FROM table2;
CLOSE cur1;
END; $$
-------------------
CALL explode_table(',');

MySQl storage procedures

I have a little problem. Looks like the procedure does not exist. Somehow it's dropped after the creation. I get different error each time i change something. I'm not really sure what's causing the error, maybe I'm not allowed to drop procedures and creating them in the same query.
I hope you guys can help me out.
drop procedure if exists refIntChk;
DELIMITER //
CREATE PROCEDURE refIntChk(IN district INT(11), OUT b INT(1))
BEGIN
DECLARE b INT(1);
IF district IN (select dist FROM t13)
THEN
SET b = 1;
ELSE
SET b = 0;
END IF;
END; //
DELIMITER ;
drop procedure gen if exists ;
DELIMITER //
CREATE PROCEDURE gen()
BEGIN
DECLARE rows INT(11) DEFAULT (SELECT COUNT(dist) FROM t13);
DECLARE district INT(11);
DECLARE custname VARCHAR(16);
DECLARE revenue FLOAT;
DECLARE x INT DEFAULT 10000;
DECLARE outvar INT(11);
WHILE x > 0
DO
SET district = FLOOR(RAND()*rows)+1;
CALL refIntChk(district, outvar);
IF outvar = 1
THEN
SET custname = substring(MD5(RAND()), -16);
SET revenue = (RAND() * 10);
INSERT INTO t14 VALUES(NULL, custname, district, revenue);
SET x = x - 1;
END IF;
END WHILE;
END;//
DELIMITER ;
CALL gen();

When you get errors, it's usually good to run each statement, one by one, and see which one is producing the error.
The second DROP procedure statement should be:
drop procedure if exists gen;