How to perform string mapping for a value stored in a variable?
Example:
I have my output in a variable say "a".
set a "a.b12.d4" (its unknown)
Is it possible to use string map to map contents of $a as "\t" in another variable say b?
like,
set c [string map {"contents of $a" "\t"}$b]
{I know $a cannot be used here. Is there a way to subtitute contents of $a here in string mapping?}
It is possible if you do not use curly braces as they prevent substitution:
set a "a.b12.d4"
set b "$a.123"
puts [string map [list $a \t] $b]
Related
I know how to do the search and replace for one instance, but I was wondering if there is a short way where I am able to replace all of the brackets with X for this specific "statement".
You can use string map to find and replace characters in a string
set a = {dft_scan_si[0] dft_scan_si[1] dft_scan_si[2]}
set b [string map {[ X ] X} $a
puts $b
This should output dft_scan_siX0X dft_scan_siX1X dft_scan_siX2X
I have a piece of code like this
oo::class create class_test {
variable title_text
variable result
method title {t} {
set title_text $t
set result [format "%-6s %-6s" {*}$title_text]
}
method print {} {
return $result
}
}
set a "abcde"
set b "fghij"
class_test create foo
foo title {"$a" "$b"}
puts [foo print]
The real output is
$a $b
While the expected output is
abcde efghi
Could someone help to fix it?
Change
foo title {"$a" "$b"}
to
foo title [list $a $b]
so that the variables get substituted by their values.
You want to expand substitutions inside a {brace-quoted} string (logically) after the point that it is written in the script. This isn't usually recommended (not when you can construct arguments with list correctly), but you can do it.
method title {t} {
set title_text [lmap value $t {
uplevel 1 [list subst $value]
}]
set result [format "%-6s %-6s" {*}$title_text]
}
We do the transform on each word in the argument (lmap) and the transform is to apply subst to it, which must be done in the caller's context (uplevel 1). The use of list in there is so that we guarantee that we make a substitution-free script to run in the outer context, a very strongly recommended practice.
A feature of TclOO is that you don't need to take special precautions to use uplevel (or upvar) when using it, unlike some other older object systems for Tcl. That makes doing this sort of thing in a method no more tricky than doing it in a normal procedure. This is true even when inheritance is present.
Could someone help to fix it?
I fail to see why you, first, pack variable references into a single value and, then, uplevel-substitute them. In addition, the number of value arguments to format seem fixed. Why not just use two separate formal parameters to your title method and use them directly?
method title {v1 v2} {
set result [format "%-6s %-6s" $v1 $v2]
}
Then just call it like so:
foo title $a $b
Update
to generate the title in different length
then better use args like so?
method title {args} {
set result [format [join [lrepeat [llength $args] "%-6s"] " "] {*}$args]
}
args is the natural way of having a method (proc) with variable arguments in Tcl.
I'd like to automatically convert URLs, i.e
"https://sc-uat.ct.example.com/sc/" into "https://invbeta.example.com/sc/"
"https://sc-dev.ct.example.com/sc/" into "https://invtest.example.com/sc/"
"https://sc-qa.ct.example.com/sc/" into "https://invdemo.example.com/sc/"
I've tried following code snippet in TCL
set loc "https://sc-uat.ct.example.com/sc/"
set envs(dev) "test"
set envs(uat) "beta"
set envs(qa) "demo"
puts $envs(uat)
regsub -nocase {://.+-(.+).ct.example.com} $loc {://inv[$envs(\1)].example.com} hostname
puts "new location = $hostname"
But the result is: new location = https://inv[$envs(uat)].example.com/sc/
It seems that [$envs(uat)] is NOT evaluated and substituted further with the real value. Any hints will be appreciated. Thanks in advance
But the result is: new location =
https://inv[$envs(uat)].example.com/sc/ It seems that [$envs(uat)] is eval-ed further.
You meant to say: [$envs(uat)] is not evaluated further?
This is because due to the curly braces in {://inv[$envs(\1)].example.com}, the drop-in string is taken literally, and not subjected to variable or command substitution. Besides, you don't want command and variable substitution ([$envs(\1)]), just one of them: $envs(\1) or [set envs(\1)].
To overcome this, you must treat the regsub-processed string further via subst:
set hostname [subst -nocommands -nobackslashes [regsub -nocase {://.+-(.+).ct.example.com} $loc {://inv$envs(\1).example.com}]]
Suggestions for improvement
I advise to avoid the use of subst in this context, because even when restricted, you might run into conflicts with characters special to Tcl in your hostnames (e.g., brackets in the IPv6 authority parts). Either you have to sanitize the loc string before, or, better work on string ranges like so:
if {[regexp -indices {://(.+-(.+)).ct.example.com} $loc _ replaceRange keyRange]} {
set key [string range $loc {*}$keyRange]
set sub [string cat "inv" $envs($key)]
set hostname [string replace $loc {*}$replaceRange $sub]
}
I havetried to split but still failed.
set strdata "34a64323R6662w0332665323020346t534r66662v43037333444533053534a64323R6662w0332665323020346t534r66662v430373334445330535"
puts [split $strdata "3334445330535"] ;#<---- this command does not work
The result needed as below:
{34a64323R6662w0332665323020346t534r66662v43037} {34a64323R6662w0332665323020346t534r66662v43037}
The split command's optional second argument is interpreted as a set of characters to split on, so it really isn't going to do what you want. However, there are other approaches. One of the simpler methods of doing what you want is to use string map to convert the character sequence into a character that isn't in the input data (Unicode is full of those!) and then split on that:
set strdata "34a64323R6662w0332665323020346t534r66662v43037333444533053534a64323R6662w0332665323020346t534r66662v430373334445330535"
set splitterm "3334445330535"
set items [split [string map [list $splitterm "\uFFFF"] $strdata] "\uFFFF"]
foreach i $items {
puts "==> $i"
}
# ==> 34a64323R6662w0332665323020346t534r66662v43037
# ==> 34a64323R6662w0332665323020346t534r66662v43037
# ==> {}
Note that there is a {} (i.e., an empty-string list element) at the end because that's the string that came after the last split element. If you don't want that, add a string trimright between the string map and the split:
# Doing this in steps because the line is a bit long otherwise
set mapped [string map [list $splitterm "\uFFFF"] $strdata]
set trimmed [string trimright $mapped "\uFFFF"]
set items [split $trimmed "\uFFFF"]
The split command doesn't work like that, see the documentation.
Try making the data string into a list like this:
regsub -all 3334445330535 $strdata " "
i.e. replacing the delimiter with a space.
Documentation:
regsub,
split
I have a string abc.def.ghi.j and I want to remove abc. from that, so that I have def.ghi.j.
1) What would be the best approach to remove such a prefix which has a specific pattern?
2) Since in this case, abc is coincidentally the prefix, that probably makes things easier. What if we wanted abc.ghi.j as the output?
I tried it with the split method like this
set name abc.def.ghi.j
set splitVar [split $name {{abc.}} ]
The problem is that it splits across each of a, b, c and . seperately instead of as a whole.
Well, there's a few ways, but the main ones are using string replace, regsub, string map, or split-lreplace-join.
We probably ought to be a bit careful because we must first check if the prefix really is a prefix. Fortunately, string equal has a -length operation that makes that easy:
if {[string equal -length [string length $prefix] $prefix $string]} {
# Do the replacement
}
Personally, I'd probably use regsub but then I'm happy with using RE engine tricks.
Using string replace
set string [string replace $string 0 [string length $prefix]-1]
# Older versions require this instead:
# set string [string replace $string 0 [expr {[string length $prefix]-1}]]
Using regsub
# ***= is magical and says "rest of RE is simple plain text, no escapes"
regsub ***=$prefix $string "" string
Using string map
# Requires cunning to anchor to the front; \uffff is unlikely in any real string
set string [string map [list \uffff$prefix ""] \uffff$string]
Using split…join
This is about what you were trying to do. It depends on the . being a sort of separator.
set string [join [lrange [split $string "."] 1 end] "."]