I am running Delphi XE3 (Ultimate Edition), MySQL database and this is the error I get when a click Test Connection.
As a response, I located the libmysql library in my xampp directory and copied it over to my System32 directory. This does not work however.
Which libraries/drivers is this message referring to and what is the correct directory to place them in?
libmysql version - 5.5.16.0
The message states that the library could be:
missing;
not properly installed; or
of the wrong version
I googled for the library and came across this blog post which discusses that aforementioned error message and provides a more recent version of the libmysql library which is to be placed in the bin directory (Embarcadero\RAD Studio\10.0\bin).
libmysql Library Download Link
You should never place any 3rd party files in the bin directory - XE3 does not allow this
Please Read this document
Related
What we are trying to do is to get SonarQube to analyze our Typescript (Node.JS) project on a Docker image, but we are running into an error. If it helps, we are trying to use the sonarqube-scanner module from Node.JS.
The error is as encountered below:
[17:57:23] Starting analysis...
[17:57:24] Getting info from "package.json" file
[17:57:24] Checking if executable exists: /root/.sonar/native-sonar-scanner/sonar-scanner-4.5.0.2216-linux/bin/sonar-scanner
[17:57:24] Could not find executable in "/root/.sonar/native-sonar-scanner".
[17:57:24] Proceed with download of the platform binaries for SonarScanner...
[17:57:24] Creating /root/.sonar/native-sonar-scanner
[17:57:24] Downloading from https://binaries.sonarsource.com/Distribution/sonar-scanner-cli/sonar-scanner-cli-4.5.0.2216-linux.zip
[17:57:24] (executable will be saved in cache folder: /root/.sonar/native-sonar-scanner)
[91m[18:03:53] [0m[91mERROR: impossible to download and extract binary: connect ETIMEDOUT 91.134.125.245:443
[0m[91m[18:03:53] [0m[91m SonarScanner binaries probably don't exist for your OS (linux).
[0m[91m[18:03:53] In such situation, the best solution is to install the standard SonarScanner (requires a JVM).
[0m[91m[18:03:53] Check it out at https://redirect.sonarsource.com/doc/install-configure-scanner.html
Now if you notice from the error, the binaries server encounters an ETIMEDOUT error, and this is because the server that accesses it comes from an internal network that cannot access external sites.
Would it be possible to configure SonarQube to pull from an internal server? And if so how would we go about configurating this?
Many thanks in advance!
I was able to find documentation through the SonarQube Javascript module here (https://www.npmjs.com/package/sonarqube-scanner)
By default, the scanner binaries are downloaded from https://binaries.sonarsource.com/Distribution/sonar-scanner-cli/. To use a custom mirror, set $SONAR_SCANNER_MIRROR. Or download precise version with $SONAR_SCANNER_VERSION
Example:
export SONAR_SCANNER_MIRROR=https://npm.taobao.org/mirrors/sonar-scanner/
export SONAR_SCANNER_VERSION=3.2.0.1227
I have attempted to install Psychtoolbox for Octave on Windows 10, per the installation instructions. Before the installation completes, I get this warning:
Screen() failed to work for some reason:
Check the troubleshooting instructions on our Wiki (Download section
and FAQ section, maybe also the Bugs section).
You may need to delete (or rename) the following DLL files in your Octave-4.4.1 installations
bin folder to make this work, then restart Octave:
C:\Octave\4.4.1\bin\libglib-2.0.0.dll
C:\Octave\4.4.1\bin\libgmodule-2.0.0.dll
C:\Octave\4.4.1\bin\opengl32.dll
Once you manage to fix the problem (simply type 'AssertOpenGL' to verify
that stuff works now), you do not need to run the installation routine again,
but can start working immediately.
I had already deleted the named DLL files, which I confirmed. I then ran AssertOpenGL and received this error:
Last Error: could not find library or dependencies: D:\Coding\PTB\Psychtoolbox\PsychBasic\Octave4WindowsFiles64\Screen.mex
Simply calling Screen directly gives this error:
error: library open failed: D:\Coding\PTB\Psychtoolbox\PsychBasic\Octave4WindowsFiles64\Screen.mex
However, the directory containing Screen.mex is at the very top of my path:
Octave's search path contains the following directories:
.
D:\Coding\PTB\Psychtoolbox\PsychBasic\Octave4WindowsFiles64
D:\Coding\PTB\Psychtoolbox
<etc>
As such, the solution to this similar question is of no use. What might I be able to do to correctly configure PTB on Octave?
What version of gstreamer are you using? I had a similar problem recently and fixed it by installing gstreamer 1.14.4. The latest version of gstreamer will not work, nor will versions earlier than 1.14.4.
To learn MySQL I installed PopSQL using .deb package but it's not working, when I launch PopSQL from terminal with sudo popsql I get these error in the terminal and PopSQL ui shows blank screen.
{"name":"PopSQL","hostname":"ivyRose","pid":16621,"level":30,"msg":"Starting app. Look for crash reports in /tmp and error logs in /home/neon/.config/PopSQL/error.log","time":"2018-11-22T12:15:27.927Z","v":0}
(popsql:16621): IBUS-WARNING **: 18:00:28.174: The owner of /home/neon/.config/ibus/bus is not root!
[Oracle] NJS-045: cannot load the oracledb add-on binary for Node.js 8.2.1 (linux, x64)
Node.js require() error was:
DPI-1047: 64-bit Oracle Client library cannot be loaded: "libclntsh.so: cannot open shared object file: No such file or directory". See https://oracle.github.io/odpi/doc/installation.html#linux for help
Node.js require() mapped to /opt/PopSQL/resources/app.asar/node_modules/oracledb/build/Release/oracledb.node
Node-oracledb installation instructions: https://github.com/oracle/node-oracledb/blob/master/INSTALL.md
You must have 64-bit Oracle client libraries in LD_LIBRARY_PATH, or configured with ldconfig.
If you do not have Oracle Database on this computer, then install the Instant Client Basic or Basic Light package from
http://www.oracle.com/technetwork/topics/linuxx86-64soft-092277.html
[ODBC] libodbc.so.1: cannot open shared object file: No such file or directory
You don't need PopSQL to learn MySQL.
But, if you want it, to get it going, follow the error message instructions:
download the Instant Client Basic Light package from
http://www.oracle.com/technetwork/topics/linuxx86-64soft-092277.html
unzip it
add the directory to your library search path, either via LD_LIBRARY_PATH or using ldconfig (I recommend the latter), as shown at
https://www.oracle.com/technetwork/topics/linuxx86-64soft-092277.html#ic_x64_inst
PopSQL should use a try/catch block when it requires oracledb so you don't see the error.
It looks like you are missing the required driver from mysql. You can download and install this from
https://dev.mysql.com/downloads/connector/odbc/
The answer here should help.
https://askubuntu.com/questions/800216/installing-ubuntu-16-04-lts-how-to-install-odbc?answertab=votes#tab-top
When I run the project I get an error:
C:\Users\admin\Documents\NetBeansProjects\project\nbproject\build-impl.xml:1007:
Warning: Could not find file
C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar to
copy. BUILD FAILED (total time: 0 seconds)
Previously Database I used was Oracle but now I want use Mysql Server. I've already changed the code accordingly, also put mysql connector inside libraries.
Where have I stuck? Why it is giving error concerning oracle driver even if mysql server used?
P.S.
Server used: Apache Tomcat 7.0
Netbeans version: 7.4
You probably still have references to the old jar in Netbeans' build script. Right click on your project, select Properties, and look under the Build section for any reference to the old jar.
You can also edit the ant build script manually. The file path is given in the error message your provided.
You probably still have references to the old jar in Netbeans' build script. Right click on your project, select Properties, and look under the library section for any reference to the old jar.
After installing from the RPM and then trying the Binary versions of APE (AJAX Push Engine) I am getting this error (on both versions) when I try to run the APE server:
[Module] Failed to load ../modules/libmod_spidermonkey.so [Invalid library] (libmysqlclient_r.so.15: cannot open shared object file: No such file or directory)
I am using Fedora Linux, with MySql and apache installed. How can I get this libmysqlclient file? I have found this RPM: http://rpm.pbone.net/index.php3/stat/4/idpl/12471829/dir/fedora_4/com/mysqlclient15-5.0.67-1.fc4.remi.i386.rpm.html
And it says it includes this file, so I downloaded it to the box, attempted to install and tells me that it's already installed.
Any advice would help thanks!
Inside the ape.conf there's a module working directory which must be altered.