All,
I've been working on a custom timesheet report that uses multiple datasets (8 to be exact). Each dataset selects the data by the same ID field which is currently input as a parameter. It works great like that. But now I'm told that the end user wants to input a date and have all the reports printed out for that date rather than having to enter in an ID each time. Each timesheet is 2 - 3 pages. It is intended to emulate a form and contains some data but a lot of blank areas to allow the field people to write in any changes that have occurred.
My question, is this: what is the best way of accommodating the new requirement? Should I build it all as one big dataset and use the date as a parameter?
Should I create a wrapper report that would prompt for the date and then use the existing report as sub report? Would that even work?
Is there any way I can just create a new date parameter and put that ahead of the ID parameter and get them to print out like that? I've got a few hidden parameter fields on the body that get used in the page header and are used to link some of the datasets.
any help is appreciated.
Easiest way to achieve this is indeed by creating a wrapper report with the date parameter. The data set in this report will then fetch all items (with ID) that match the query by the user. The report can then have a list for that dataset, with the original report as a subreport. If you pass the ID parameter from the dataset to the subreport you wouldn't need to change hardly anything in the original report.
Two things to watch out for:
the Report Header and Footer in a subreport are not rendered - these are only rendered for the wrapper report
you may need to tweak your page breaks in the subreport and on the new list in the wrapper report so each new form starts on a fresh page
Related
I have a query that returns relevant data about inspectors and how long it takes them to respond to issues. The only parameters are a BeginDate and EndDate so for any given date range there could be anywhere from 0 to 100 inspectors.
I am using only one dataset and it contains an "Inspector" field that I'm hoping can be used as a filter to create as many tables as there are inspectors.
I know you can set filters on tables but from my (limited) SSRS knowledge, you must already have the tables created and the filters are typically hard-coded. What I need, is some way for the report to see how many Inspectors there are in the dataset and group those records into their own tables, repeating the same one created tablix over and over as needed.
This is being done strictly in SSRS 2012, not using a ReportViewer where back-end code could help me out unfortunately...
I don't have any code examples to provide, like I said I know you can do filtering but I am at a loss when it comes to doing something like this dynamically based on data... Sorry.
Depending on the report design you could either...
Single report with grouping
1. Create a single tablix.
2. Create a row group by Inspector and then add whatever fields you need to the details section.
3. You can optionally set page breaks between instances of your Inspector rowgroup from the rowgroup properties.
Sub report method
1. Create a subreport that accepts a parameter (InspectorID for example).
2. In the subreport filter the dataset using the parameter passed in so it only return data for a single inspector.
3. Add whatever controls you need to the report to handle a single Inspector
4. Create a main report
5. Add a dataset that gives you a simple distinct list of Inspectors, this will be used to pass parameters to the subreport.
Lets assume it just contains a list of InspectorIDs.
6. Add a list control to the report and set it's dataset property to the dataset that contains your list of InspectorIDs
7. Right-click in the list control's 'cell' and insert a subreport.
8. Set the subreport property to the subreport you created earlier and set that parmameter IsnpectorID to your InpsectorID field.
This will produce a subreport for each instance of inspector it finds.
Sorry about the format of this answer, in a rush!
I need to create student certificate using SSRS. I created new .rdl file did designed and associated with data source.
It works for single student as expected. But it does not creates report with multiple certificate while my data source returns multiple student details.
I am new for SSRS, please help me out to achieve this.
If you want to generate a certificate for each row of your dataset in the same report, you can do this with a tablix:
Add a Tablix to you your report that lists your dataset data
Drag a Rectangle into one of the Details row cells
Make the cell you dragged the Rectangle into large enough to hold all your
certificate report items
Select all your certificate items and move them into the Rectangle
Update any references to your dataset to not include a 'scope'
ie: Change =sum(Fields!ColName.Value, "Your Dataset") to =sum(Fields!ColName.Value)
Run the report
You should now have a certificate for each row in your dataset.
If you want to export multiple separate certificates, you will need to set up a data driven subscription on your report, that runs it once for each row of a returned dataset. Obviously you will need to adjust your report to be able to receive which student to generate the certificate for as a parameter.
Another way is.. if your data set is returning one row per student, then all you need to do you on your tablix is to add a parent row group.. group on StudentID.. or something unique per record.. go to group properties and add a page break at end of group. This should generate one certificate page per student..
You may need to adjust group headings and footer and things like that appear.. You will figure it out... alternatively.. watch a youtube video on how to do a basic ssrs report.
I have a subreport call StudentSub.rdl. This is linked with DataSet (stored procedure) Sp_GetStudentName(#ClassNo int). This works fine it gives always only one certificate.
Since I wanted to generate class wise certifiacte, in that case I wanted to get muliple report page wise in one PDF file. Followed below steps:
Created new RDL file called StudentReports.rdl
Linked with same data set stored procedure Sp_GetStudentName.
Drag a table from tool box to design body.
Set visibility False for table Header and some columns except one td.
Right clicked in that box (td) and inserted sub report
Right clicked sub report properties selected StudentSub subreport.
In the sub report properties added parameter ClassNo then clicked Ok.
Now When I am previewing this StudentReports by passing class no. I am getting correct number of pages.
Hope this will help others.
Thanks!
I have a subreport I am trying to link into my main report. The main report pulls back information from one database and the subreport pulls from another. I could use lookup, but I lose the ability to format so I was hoping to achieve this with a subreport.
I enter a date range via my parameters, and let's say I get 30 client/matter codes back. It page breaks at the end of each row, so the data for each client/matter ends up on its own report. The goal is for me to output a large number of reports based on date ranges. The subreport pulls in folder names, and just like the other information, the folders for only that client/matter should be on that report.
What's currently happening is on each report, it just lists ALL of the folders for ALL of the client matters on each and every report.
I've tried making the subreport an adjacent group (which you can see in the screenshot) and grouping on Client code and then matter code. I've tried making the client code and matter codes internal parameters in both reports in the hope that it help filtered. I also tried just inserting the subreport into a cell inside the matter_code group but not as a group itself.
I apologize in advance if my explanation doesn't make sense. I'm having a hard time trying to put this into words.
From your explanation I would assume that you have a subreport in a group but you are not passing anything through to it. Have you tried passing through parameters to the subreport that uniquely define the customer and the customer folders?
I need to add a filter to a Report, that within anotherreport, the filtered results appear in the drilldown report.
For example: An .rdl file displays the first report, in that report a link can be clicked to access another report (.rdl) file. The report that displays after clicking link should be filtered by option selected from the first report(.rdl).
How could this be done? My thought that two datasets in each report could provide the information for the filter, however the filter expression is not valid this way...? I know this may not be the best way to do this.
So creating a drilldown report would be more acceptable. Creating one report and including a dataset with it by setting parameters to be called in the drilldown.
Does there need to be two datasets for each report to do this? I was assuming that the filter expression be written to do this: Field!.name.value AND Field!.name.value, etc to the whatever value I need to compare to or by.
Could this be a shared dataset to do this?
I was able to solve or partially solve this. I created a new report, with a query with the necessary columns that I needed in report 2. The drillthrough report(report 2) is linked from a textbox from a report allowing a user to view the information they need by clicking a link that displays the new report(passing the parameters from report 2 to the new report). If anyone has trouble with this, the simplest way would be to create one report and pass parameters to report two with parameters created from whatever query you want to use that has the values you want as columns in the report.
I would like to create a report which I can use as a sub-report multiple times on the same parent report. However, each occurrence of the subreport should have different values.
For instance, there is a table called DailyReport.
Records in this table contain:
Date, member, team, description
The sub reports should be for each team within a certain date range. However, the date range per subreport/team will not be the same.
So, if the date range for all teams was consistent, then I could create a single subreport, and do some Ordering on the resulting records to separate things out into teams.
However, with inconsistent date ranges, I can't utilize a single query, so the most straight forward solution I see is to create separate subreports and queries for each range of each team.
The problem with this solution is that if I decide to change the format of the subreports I must do so in each specific subreport--a lot of duplicate work.
I would like to create a generic query and subreport. The query and sub report would call VB functions which would return the relevant value.
This means my parent report has the same generic report on it multiple times. As each subreport is rendered, I would like to increment a value behind the scenes so that the functions which the generic query and subreport call know to return a different value.
However, it seems that's not how things work in Access. The subreports on a report are not rendered linearly. A subreport is created, and then "stamped" onto a report where ever required. This means that all of my generic subreports have the same data.
How can I define a generic report and query? Then plug in different values into the report and query while the report is being reused multiple times on the same parent report.
You need to look into the LinkMasterFields and LinkChildFields property of reports. They are designed for exactly this purpose -- to filter a subreport based on current data in the main report, without needing any code or even queries.
You are correct that LMF/LCF do not work on date ranges, only values. So use LMF/LCF for the team filter.
For the date range filtering, you can use an unbound form that launches the report as two parameters defined in the base query. Create frmLaunch, and add two text boxes minDate and maxDate. Set their Format property to Short Date so Access with interpret them correctly and provide the date pickers. Now modify the base query, adding two Date/Time parameters [Forms]![frmLaunch]![minDate] and [Forms]![frmLaunch]![maxDate]. Now, find your date field and set its criterion to Between [Forms]![frmLaunch]![minDate] and [Forms]![frmLaunch]![maxDate]. Add a button to frmLaunch that runs the code DoCmd.OpenReport "YourReportName", acViewPreview.
So, the goal was to make it possible to re-use the same sub-report multiple times on the same parent report, with full flexibility on how the subreport retrieves data.
I placed multiple instances of the same subreport on a parent report. On the subreports Open event I placed a line like
Me.Report.RecordSource = "SELECT * FROM someTable WHERE " & getCriteria()
nextCriteria()
Maybe its possible to pass a value that identifies which instance of the subreport is opening to the getCriteria function. Probably like a getCriteria(Me.Report.Name). But in this case I kept track of how many subreports had been produced in vb.
Unfortunately, if your subreport has controls which have a data source which is a vb function, all reports will show the same value for that control. To get around this I added something like getSomeValue() & "As [Some Value]" into the SELECT of the SQL statement above. Don't forget to add single quotes or hashes around getSomeValue() if you are passing a String or date.
That's basically it, it's a pain. But I couldn't find a more elegant way to do it.
Edit:
One major caveat I experience with doing this, is that although the print preview works correctly, when actually printing or exporting to PDF, some subreports would not be included. Maybe there is something else causing this...