Let me begin by saying, I am aware of this thread and others around the web that seek to trouble shoot this issue.
The solutions posted there do not apply to my issue. I have spent 5 hours trying to resolve this before deciding to ask the question.
The problem:
When I attempt to log into SSMS (or connect from a java application) using SQL Authentication I get this error:
A connection was successfully established with the server, but then an
error occurred during the login process. (provider: Shared Memory
Provider, error: 0 - No process is on the other end of the pipe.)
(Microsoft SQL Server, Error: 233)
Although it does work, it is not an option for me to use integreated authentication.
The database I am attempting to connect to is on the same machine as my SSMS instance. There is no network, this is a stand-alone system.
NAMED PIPES is ENABLED in my configuration, I HAVE rebooted since, TCP IP is a higher priority than named pipes in my configuration.
I have even gone as far as to uninstall SQL Server and reinstall it, to no avail.
The details of my SQL Server instance are as follows:
Microsoft SQL Server Management Studio - 10.0.2531.0
Microsoft Analysis Services Client Tools - 10.0.1600.22
Microsoft Data Access Components (MDAC) - 6.1.7601.17514
Microsoft MSXML - 3.0 5.0 6.0
Microsoft Internet Explorer - 9.0.8112.16421
Microsoft .NET Framework - 2.0.50727.5466
Operating System - 6.1.7601
Configuration details are as follows:
http://i45.tinypic.com/vxdz7c.png
http://i45.tinypic.com/vxdz7c.jpg
I connect from java using this code.
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
String connectionUrl = "jdbc:sqlserver://localhost;database=AdventureWorks;integratedSecurity=false;User=JIMBO; Password=JIMBO;";
Connection con = DriverManager.getConnection(connectionUrl);
But please remember, this error also occurs when I atttempt to log in to SSMS directly.
Thanks in advance.
-Jim
To force TCP/IP being used replace localhost with 127.0.0.1 in your connection string.
As you are using a username and password make sure SQL authentication is enabled. By default only Windows integrated is enabled on sqlserver 2008.
With SqlServer authentication keep in mind that a password policy is in place to enforce security.
Forcing the TCP/IP connection (by providing 127.0.0.1 instead of localhost or .) can reveal the real reason for the error. In my case, the database name specified in connection string was incorrect.
So, here is the checklist so far:
Make sure Named Pipe is enabled in configuration manager (don't forget to restart the server).
Make sure SQL Server Authentication (or Mixed Mode) is enabled.
Make sure your user name and password are correct.
Make sure the database you are connecting to exists.
My resolution was to login using the Windows Login then go to security>Logins locate the troubled ID And retype the used password. The restart the services...
Adding "user instance=False" to connection string solved the problem for me.
<connectionStrings>
<add name="NorthwindEntities" connectionString="metadata=res://*/Models.Northwind.csdl|res://*/Models.Northwind.ssdl|res://*/Models.Northwind.msl;provider=System.Data.SqlClient;provider connection string="data source=.\SQLEXPRESS2008R2;attachdbfilename=|DataDirectory|\Northwind.mdf;integrated security=True;user instance=False;multipleactiveresultsets=True;App=EntityFramework"" providerName="System.Data.EntityClient" />
</connectionStrings>
This problem was caused for me by this error which appeared just prior in the application error log.
"A read operation on a large object failed while sending data to the client. A common cause for this is if the application is running in READ UNCOMMITTED isolation level. This connection will be terminated."
I was storing PDFs in a SQL table and when attempting to SELECT from that table it spit out that error, which resulted in the error mentioned in your question.
The solution was to delete the columns that had large amounts of text, in my case Base64 encoded files.
perhaps this comes too late, but still it could be nice to "document it" for others out there.
I received the same error after experimenting and testing with Remote Desktop Services on a MS Server 2012 with MS SQL Server 2012.
During the Remote Desktop Services install one is asked to create a (local) certificate, and so I did. After finishing the test/experiments I removed the Remote Desktop Services. That's when this error appeared (I cannot say whether the error occured during the test with RDS, I don't remember if I used/tried the SQL Connection during the RDS test).
I am not sure how to solve this since the default certificate does not work for me, but the "RDS" certificate does.
BTW, the certificates are found in App: "SQL Server Configuration Manager" -> "SQL Server Network Configuration" -> Right click: "Protocols for " -> Select "Properties" -> Tab "Certificate"
My default SQL Certificate is named: ConfigMgr SQL Server Identification Certificate, has expiration date: 2114-06-09.
Hope this can give a hint to others.
/Kim
For me it was because only Windows Authentication was enabled. To change security authentication mode. In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties. On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
Change Server Authentication Mode - MSDN - Microsoft
https://msdn.microsoft.com/en-AU/library/ms188670.aspx
This Might help as reference
I had the same issue, after multiple trial of suggested solution on this site and others, I found a solution for my scenario. The account was locked out
How to Check if the account is Locked out...
Login to the server using higher privileged account (like SA or admin rights)
Expand security ==> select the login name ==>open the property window of the login ==> select the status page on the property window
Make sure This 3 Things
1, permission to connect database is GRANTED
2, Login is ENABLED
3, Status
SQL server authentication
Login is not locked out (Uncheck the box)
Thanks
Tsige
I just executed connection.close() by adding it as first statement and it was solved. Then i removed the line.
One follow up to this. I had installed SQL Server 2014 with only Windows Authentication. After enabling Mixed Mode, I couldn't log in with a SQL user and got the same error message as the original poster. I verified that named pipes were enabled but still couldn't log in after several restarts. Using 127.0.0.1 instead of the hostname allowed me to log in, but interestingly, required a password reset prompt on first login:
Once I reset the password the account worked. What's odd, is I specifically disabled password policy and expiration.
Another cause is if the user's default database is unavailable.
I had an account that was used for backing up two databases. When the backup user's default database was taken off-line, the "no process on the other end of the pipe" error started.
Came here looking for a solution to a similar issue, which I just introduced by changing Schannel settings of our IIS server using "IIS Crypto" by Nartac... By disabling the SHA-1 hash, the local SQL Server was not able to be reached anymore, even though I didn't use an encrypted connection (not useful for an ASP.Net site accessing a local SQL Express instance using shared memory).
Thanks Count Zero for pointing me in the right direction :-)
So, lesson learned: do not disable SHA-1 on your IIS server if you have a local SQL Server instance.
For me the issue seems to have been caused by power failure. Restarting the server computer solved it.
I installed SQL Server 2008 Express on Win 7 64. I can connect to it via SQL Server Management Studio using Windows Auth, but not SQl Server Auth. Following the directions in http://www.linglom.com/2009/03/28/enable-remote-connection-on-sql-server-2008-express/, I feel I have properly configured for remote connections & sql server auth. Yet, when I try to login, I get an error stating that the login failed. Googling hasn't seemed to help for the answers do not make sense, do not seem to apply. One of these was a suggestion to change the dynamic port to blank, hard code the port. Since this tool is by default not installed in such fashion, I have a hard time believing this is the actual problem. Not one post I found explained why that should be changed.
The exact message is:
Cannot connect to bvl-wd-bturner\SQLEXPRess
Additional information:
Login failed for user 'DTN\bill.turner'. (Microsoft SQL Server, Error 18456)
I attempted to login with the following credentials:
Server type: Database Engine
Server name: bvl-wd-bturner\SQLEXPRESS
Authentication: SQL Server Authentication
Login: DTN\bill.turner
Password:
For what its worth, logging on using Windows auth, I look at the connection properties. The User Name complies with the login above. The Server Name is the same (in fact copy/pasted to be sure for both).
=== UPDATE ===
Windows Firewall is off.
I tried also, even with my reservations, to hardcode the port number, removing the "0" on all dynamic ports and setting the port to 1433. No luck. :-(
=== UPDATE 2 ===
I realized I needed to create a SQL Server account and have done so. I can now log in via SSMS with the following credentials. However, I seem to be unable to login through DbVisualizer or a test java file with the follow:
Driver is net.sourceforge.jtds.jdbc.Driver
Connection url is jdbc:jtds:sqlserver://bvl-wd-bturner:1433/host
The credentials I now use successfully in SSMS are:
Server type: Database Engine
Server name: bvl-wd-bturner\SQLEXPRESS
Authentication: SQL Server Authentication
Login: local
Password:
At this point I have to believe it is something obvious I am missing, but have yet to find it.
The login: DTN\bill.turner looks like a Windows login, not a SQL server login which has no domain component. Is DTN your domain name? If so, providing this with the SQL login will probably confuse the client into trying windows authentication, which will then fail if the login doesn't exist.
What is the name of the SQL server login that you have created (within the SQL management studio)? It shouldn't have a domain\username format, it should just be a username on its own. You also need to make sure that you select SQL authentication when connecting.
Try adding your current logged in account (Windows) to the Local Administrators group on your computer.
The link posted at the beginning,
http://www.linglom.com/2009/03/28/enable-remote-connection-on-sql-server-2008-express/
Plus this article on setting the default log on database:
http://blog.sqlauthority.com/2008/11/04/sql-server-fix-error-4064-cannot-open-user-default-database-login-failed-login-failed-for-user/
Solved this problem for me. Hopefully it will help others who wind up here.
When i am creating users in SQL management studio i create them under the server name and then i create them under the database but when i try to log on using the user name and password i cant. getting erro saying
> TITLE: Connect to Server
Cannot connect to LAPTOP-RED\SQLEXPRESS.
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
BUTTONS:
OK
And the suggested solution from the help link is:
User Action
Use the SQL Server Surface Area Configuration tool to allow SQL Server
to accept remote connections. For more information about the SQL
Server Surface Area Configuration Tool, see Surface Area Configuration
for Services and Connections.
Which is what you have to do. By default the SQL Express Server isn't configured to allow remote connections.
hi I faced same issue in MicroSoft sql server 2008.
this error occurs while user limit exceeded, as you have set max connection to 1 and if someone is already logged in (or using any webpage which access your server) then it will not allow anyone to access directly or indirectly. to solve this issue simply follow following steps:
stop all web services.
open services.msc using RUN and ****restart sql server** and do not start any service which uses your sql server, so that you will be able to log in using sql server management studio.
now open sql server management studio and click on New Query button.
It will ask for user name and password use your login name and password.
run these scripts one by one sp_configure 'user connections', 0
go
6.reconfigure with override
after this restart your sql server it will show a confirmation message click on OK.
Bingo
It works. please don't forgot to vote ;-)
I have been unable to configure my SQL Server 2008 Express to allow remote connections. I followed the instructions from this guide: http://www.linglom.com/2009/03/28/enable-remote-connection-on-sql-server-2008-express/ .
I am still getting the following error:
Cannot connect to 00.00.00.000
Additional information:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(Provider: Named Pipes Provider, error 40 - Could not open a connection to SQL Server) ( Microsoft SQL Server, Error: 3)
I also configured the firewall as defined in http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/ . As a test I even turned off the firewall, but nothing changed, so it is not the issue.
Update under server name, it only says the IP address. Do I need something more?
In the Server name field of Connect to Server, I had myipaddress. I changed it to myipaddress\SQLEXPRESS and it works.
In addition, once this was working without the firewall I applied settings as defined in http://www.sevenforums.com/system-security/58817-remote-access-sql-server-express-2008-windows-7-a.html to make the connection work with the firewall turned on.
Do you have sysadmin rights in sql express? It may be that your user account doesn't have the necessary permissions. There is a script on codeplex that will add you logged on account as a sysadmin.
I m creating a new login using sql server authentication.
a new login is created.
when i m tring to login with sql server authentication there is an error
Cannot connect to (SERVER NAME) i.e name\sqlexpress
Additional Information:
"A connection was successfully established with the server, but then an error
occurred during the login process. (provider: Shared Memory Provider,
error: 0 - No process is on the other end of the pipe.) (Microsoft SQL
Server, Error: 223)"
I hv already enabled all the protocols running as administrater. set authentication mode both windows and sql sever authentication
There are a number of reasons this error message appears. Try each of the following to see if it solves the problem:
Restart the SQL Service - sometimes configuration changes require a restart to take effect.
Check that Named Pipes and TCP/IP protocls are enabled from the SQL Server Configuration Manager
Use Surface Area Configuration Manager to ensure that remote connections are allowed if trying to connect from a remote machine.
Ensure your firewall (on the client and the server) is not blocking connections
Ensure the account has a default database defined.
Ensure the account is not disabled - if you have set up the account to enforce password policies then too many failed logins may disabled the account.
Double check that you are using the correct password - even to the extent of reseting it.
Here is the solution of this error which solve this issue i would like to answer here because if anybody find this question than it will also finds its answer and its time not wasted.
Click on Start menu > Programs > Microsoft Sql Server > Configuration Tools
Select Sql Server Surface Area Configuration.
Now click on Surface Area configuration for services and connections
On the left pane of pop up window click on Remote Connections and Select Local and Remote connections radio button.
Select Using both TCP/IP and named pipes radio button.
click on apply and ok.