I want to create a link or a bookmark in pdf that take me to the another pdf with PDFLib. For that I have used following code:
String optlist = "filename=paper_planes_catalog.pdf " +"destination={page 2 type fixed left 50 top 200 zoom 2}";
Now I have created the action for that as follow:
goto_action = p.create_action("GoToR", optlist);
But how can I apply that ?
You have to create the bookmark for that.
String optlist = "action={activate " + goto_action + "} fontstyle=bold textcolor={rgb 0 0 1}";
catalog_bookmark = p.create_bookmark("Our Paper Planes Catalog", optlist);
That will do the remaining.
Related
I am writing a script to change the formatting of the text from one file, and create a new text file with the changes in formatting.
I have been able to remove unwanted characters, but haven't found a way to append text to the beginning of every line in the file.
Content from the original file looks like:
DMA 123 USA 12345
What I need it to look like after appending data to the start, middle, and end of the string:
<option label="DMA 123 USA" value="123"></option>
I have almost 100 lines that vary some, but follow the above formatting. I am trying to automate this as it will be a frequent task to adjust the original file to the new format for web publishing
I have been searching and haven't found any way to do it yet. Here is my current code:
path = 'file.txt'
tvfile = open(path,'r')
days = tvfile.read()
new_path = 'tvs.txt'
new_days = open(new_path,'w')
replace_me = ['-' ,'(' ,')' ,',' , '"' , ]
for item in replace_me:
days = days.replace(item,'')
days = days.strip()
new_days.write(days)
print(days)
tvfile.close()
new_days.close()
Nit: you need to prepend, not append. That said, try something along these lines:
buffer = ""
for item in replace_me:
line = "<option label=\""
line = line + days.replace(item,'').strip()
line = line + "\"></option>"
buffer = buffer + line
new_days.write(buffer)
Hello I am currently using Python 3, BeautifulSoup 4 and, requests to scrape some information from supremenewyork.com UK. I have implemented a proxy script (that I know works) into the script. The only problem is that this website does not like programs to scrape this information automatically and so they have decided to scramble this script which I think makes it unusable as text.
My question: is there a way to get the text without using the .text thing and/or is there a way to get the script to read the text? and when it sees a special character like # to skip over it or to read the text when it sees & skip until it sees ;?
because basically how this website scrambles the text is by doing this. Here is an example, the text shown when you inspect element is:
supremetshirt
Which is supposed to say "supreme t-shirt" and so on (you get the idea, they don't use letters to scramble only numbers and special keys)
this is kind of highlighted in a box automatically when you inspect the element using a VPN on the UK supreme website, and is different than the text (which isn't highlighted at all). And whenever I run my script without the proxy code onto my local supremenewyork.com, It works fine (but only because of the code, not being scrambled on my local website and I want to pull this info from the UK website) any ideas? here is my code:
import requests
from bs4 import BeautifulSoup
categorys = ['jackets', 'shirts', 'tops_sweaters', 'sweatshirts', 'pants', 'shorts', 't-shirts', 'hats', 'bags', 'accessories', 'shoes', 'skate']
catNumb = 0
#use new proxy every so often for testing (will add something that pulls proxys and usses them for you.
UK_Proxy1 = '51.143.153.167:80'
proxies = {
'http': 'http://' + UK_Proxy1 + '',
'https': 'https://' + UK_Proxy1 + '',
}
for cat in categorys:
catStr = str(categorys[catNumb])
cUrl = 'http://www.supremenewyork.com/shop/all/' + catStr
proxy_script = requests.get(cUrl, proxies=proxies).text
bSoup = BeautifulSoup(proxy_script, 'lxml')
print('\n*******************"'+ catStr.upper() + '"*******************\n')
catNumb += 1
for item in bSoup.find_all('div', class_='inner-article'):
url = item.a['href']
alt = item.find('img')['alt']
req = requests.get('http://www.supremenewyork.com' + url)
item_soup = BeautifulSoup(req.text, 'lxml')
name = item_soup.find('h1', itemprop='name').text
#name = item_soup.find('h1', itemprop='name')
style = item_soup.find('p', itemprop='model').text
#style = item_soup.find('p', itemprop='model')
print (alt +(' --- ')+ name +(' --- ')+ style)
#print(alt)
#print(str(name))
#print (str(style))
When I run this script I get this error:
name = item_soup.find('h1', itemprop='name').text
AttributeError: 'NoneType' object has no attribute 'text'
And so what I did was I un-hash-tagged the stuff that is hash-tagged above, and hash-tagged the other stuff that is similar but different, and I get some kind of str error and so I tried the print(str(name)). I am able to print the alt fine (with every script, the alt is not scrambled), but when it comes to printing the name and style all it prints is a None under every alt code is printed.
I have been working on fixing this for days and have come up with no solutions. can anyone help me solve this?
I have solved my own answer using this solution:
thetable = soup5.find('div', class_='turbolink_scroller')
items = thetable.find_all('div', class_='inner-article')
for item in items:
alt = item.find('img')['alt']
name = item.h1.a.text
color = item.p.a.text
print(alt,' --- ', name, ' --- ',color)
I need to update two information on one object: the quantity (PLAF-gsmng) and refresh the planned order via the module function 'MD_SET_ACTION_PLAF'.
I successfully find a way to update each data separately. But when I execute the both solutions the second modification is not saved on the database.
Do you know how I can change the quantity & set the action on PLAF (Planned order) table ?
Do you know other module function to update only the quantity ?
Maybe a parameter missing ?
It's like if the second object is locked (sm12 empty, no sy-subrc = locked) ... and the modification is not committed.
I tried to:
change the order of the algorithm (refresh and after, change PLAF)
add, remove, move the COMMIT WORK & COMMIT WORK AND WAIT
add DEQUEUE_ALL or DEQUEUE_EMPLAFE
This is the current code:
1) Read the data
lv_plannedorder = '00000000001'
"Read PLAF data
SELECT SINGLE * FROM PLAF INTO ls_plaf WHERE plnum = lv_plannedorder.
2) Update Quantity data
" Standard configuration for FM MD_PLANNED_ORDER_CHANGE
CLEAR ls_610.
ls_610-nodia = 'X'. " No dialog display
ls_610-bapco = space. " BAPI type. Do not use mode 2 -> Action PLAF-MDACC will be autmatically set up to APCH by the FM
ls_610-bapix = 'X'. " Run BAPI
ls_610-unlox = 'X'. " Update PLAF
" Customize values
MOVE p_gsmng TO ls_plaf-gsmng. " Change quantity value
MOVE sy-datlo TO ls_plaf-mdacd. " Change by/datetime, because ls_610-bapco <> 2.
MOVE sy-uzeit TO ls_plaf-mdact.
CALL FUNCTION 'MD_PLANNED_ORDER_CHANGE'
EXPORTING
ecm61o = ls_610
eplaf = ls_plaf
EXCEPTIONS
locked = 1
locking_error = 2
OTHERS = 3.
" Already committed on the module function
" sy-subrc = 0
If I go on the PLAF table, I can see that the quantity is edited. It's working :)
3) Refresh BOM & change Action (MDACC) and others fields
CLEAR ls_imdcd.
ls_imdcd-pafxl = 'X'.
CALL FUNCTION 'MD_SET_ACTION_PLAF'
EXPORTING
iplnum = lv_plannedorder
iaccto = 'BOME'
iaenkz = 'X'
imdcd = ls_imdcd
EXCEPTIONS
illegal_interface = 1
system_failure = 2
error_message = 3
OTHERS = 4.
IF sy-subrc = 0.
COMMIT WORK.
ENDIF.
If I go on the table, no modification (only the modif. of the part 2. can be found on it).
Any idea ?
Maybe because the ls_610-bapco = space ?
It should be possible to update planned order quantity with MD_SET_ACTION_PLAF too, at least SAP Help tells us so. Why don't you use it like that?
Its call for changing the quantity should possibly look like this:
DATA: lt_acct LIKE TABLE OF MDACCTO,
ls_acct LIKE LINE OF lt_acct.
ls_acct-accto = 'BOME'.
APPEND lt_acct.
ls_acct-accto = 'CPOD'.
APPEND lt_acct.
is_mdcd-GSMNG = 'value' "updated quantity value
CALL FUNCTION 'MD_SET_ACTION_PLAF'
EXPORTING
iplnum = iv_plnum
iaenkz = 'X'
IVBKZ = 'X'
imdcd = is_mdcd "filled with your BOME-related data + new quantity
TABLES
TMDACCTO = lt_accto
EXCEPTIONS
illegal_interface = 1
system_failure = 2
error_message = 3.
So there is no more need for separate call of MD_PLANNED_ORDER_CHANGE anymore and no more problems with update.
I used word possibly because I didn't find any example of this FM call in the Web (and SAP docu is quite ambiguous), so I propose this solution just as is, without verification.
P.S. Possible actions are listed in T46AS table, and possible impact of imdcd fields on order can be checked in MDAC transaction. It is somewhat GUI equivalent of this FM for single order.
I'm writing a script to login to an internal html site, click around to the appropriate place, click on a specific row in an HTML table, and click a submit button. I'm pretty much there, except I can't figure out how to click the correct row - or any row for that matter.
Here is the source of the table: HTML Source
Here is what I've tried so far after navigating to the page with the table of interest (with no results, but no errors):
Set mainTable = IE.Document.getElementByID("main").contentwindow.document
mainTable.getElementsByName("acq_scenario.acq_scenario_summary").Item(0).getElementsByTagName("tr").Item(0).getElementsByTagName("td").Item(3).focus
mainTable.getElementsByName("acq_scenario.acq_scenario_summary").Item(0).getElementsByTagName("tr").Item(0).getElementsByTagName("td").Item(3).click
The code below tries to change the attributes in the HTML table based on changes that I've observed when manually clicking on a cell, but these changes have no effect on the view of the table (the row should be highlighted when a cell within it is clicked) and still don't allow me to click the submit button, which requires a row to be selected:
currScenario = mainTable.getElementsByName("acq_scenario.acq_scenario_summary").Item(0).getElementsByTagName("tr").Item(1).getElementsByTagName("td").Item(2).realValue 'gets string value for "Current Scenario" field, which I've unsuccessfully tried to use to manually update the "selected" attribute in the table
mainTable.getElementsByName("acq_scenario.acq_scenario_summary").Item(0).setAttribute "selected", "ScenarioName=" & currScenario
mainTable.getElementsByName("acq_scenario.acq_scenario_summary").Item(0).getElementsByTagName("tr").Item(0).setAttribute "class", "Skin_Selection_Color"
mainTable.getElementsByName("acq_scenario.acq_scenario_summary").Item(0).getElementsByTagName("tr").Item(0).style.setAttribute "highlight", "true"
I am a little fuzzy on what you need, but I think that using css for the row highlight and a onClick for the cell selection..
"the row should be highlighted when a cell within it is clicked"
CSS:
#msg_table tr:hover{background-color:white; }
Javascript:
/* create HTML table in Javascript */
for (var j = 0; j < search_results_length; j++){
// get zebra striping
if (j % 2 == 0){
//even
zebra = "zebra_0";
}else{
//odd
zebra = "zebra_1";
}
...
myTable+="<tr class='" + zebra + "' onClick='collapse_section_switch(" + j + ")'>"
/* row click here */
myTable+="<td align='right' onClick='balance_stuff(\"search_results[j].customer_number\")'>" + search_results[j].customer_balance + "</td>"
/* cell click here */
...
}
Does this help at all?
I still don't understand why the .click() command wouldn't click on the cell, but it turns out the answer was to use .FireEvent("onmouseup").
I have an image uploaded to a server with location like : opt/glassfish/domains/domain1/applications/j2ee-modules/SmartbadgePortal/images/2badge.jpg
I am trying to read the contents of the image rather than the image information. I searched a lot and could get the following solution for it :
File uploadedFile = new File(path);
System.out.println("Uploaded File is *** : " + uploadedFile);
item.write(uploadedFile);
Image image = null;
image = ImageIO.read(uploadedFile);
System.out.println("Image Contents is *** : " + image);
However, the when I used System.out to print "image". I get :
Image Contents is * : BufferedImage#10d7a81: type = 5 ColorModel: #pixelBits = 24 numComponents = 3 color space = java.awt.color.ICC_ColorSpace#722270 transparency = 1 has alpha = false isAlphaPre = false ByteInterleavedRaster: width = 418 height = 387 #numDataElements 3 dataOff[0] = 2|#]
But , this is not what I need. I need the contents of the image and need to store it in a BLOB column in MySQL. Please help as I am been trying various methods like ByteArrayInputStream ,but every time I see only this info rather than image itself.
Although it's not the answer you're looking for, my recommendation is to store the image in your server's file system and saving the file name (and maybe directory) in your DB. Storing an image in a BLOB cell is usually not a good idea unless there's a specific reason.