I had just barely gotten the Mercurial-Reviewboard plugin working with TortoiseHG 2.4.2 when I upgraded to TortoiseHG 2.4.3 and it stopped working.
It's now throwing the following error when I click the "Post Review" button.
"postreview plugin version 4.1.0"
"'module' object has no attribute 'findoutgoing'"
I've tried many different branches of the plugin and have had zero luck. The one I have right now is Fredrik Haard's and can be found here:https://bitbucket.org/haard/mercurial-reviewboard
Unfortunately he hasn't updated it in some time.
I've tried looking through the source for the plugin but know next to nothing about Python in general and Mercurial plugins in specific.
If anyone can help in any way I'd greatly appreciate it.
I had this same error "'module' object has no attribute 'findoutgoing'", using the following:
TortoiseHG: 2.4.3 (with Mercurial-2.3.2, Python-2.7.3, PyQt-4.9.3, Qt-4.8.2)
Reviewboard: 1.6.13
Mercurial-reviewboard plugin: windix-mercurial-reviewboard (4.1.0) from 2012-08-30 and with the following change in reviewboard.py at line 400:
self._api_post('/account/login/', {
instead of
self._api_post('/api/json/accounts/login/', {
I only have a local repository, towards which Reviewboard points using the path on the disk.
The problem was fixed as soon as I added in the .hg/hgrc file of that repository, the following:
[paths]
default = http://localhost:8003
where 8003 is the port I configured for the same repo, in the same file inside that repo.
I have two more local repos, in the same situation - no remote base - configured for 8000 and 8005 respectively, I am now able to post review requests from the TortoiseHG user interface for all of them (after having added for each of these repos, the [paths] section and the default url like above).
I hope this helps!
While still having some problems, 'my' fork works for me right now although there are encoding errors for source files that are non-ascii. If it does not work for you (commit from 2012-24-10), and the problems you have are not related to encoding (working on those), could you please describe what is happening/provide log messages?
Related
I'm having difficulty cloning a repository in Mercurial.
The repository is stored at Kiln on demand, though I'm not sure that makes much difference.
I have a new install of Tortoise HG, which has of course installed the hg command line onto my machine.
When I attempt to clone the repository, I immediately receive the error:
abort: The system cannot find the path specified: 'F:\backups\_hgcookies'
Code: 255
I don't know where it's getting this path from - there is an 'F' drive on my machine that is completely empty aside from hidden system volume files.
The Kiln Tortoise install contains a couple of plugins bundled with it, including kilnauth, which I assume is using a cookie to store authentication information.
I've looked in the mercurial.ini file, however it contains no mention of this folder or hgcookies - that I can see.
I'm wondering if there's a permissions issue somewhere - I'm in the administrators group on the machine, but am on a company network with quite a bit of lockdown which has caused problems before.
I've not found any similar problems through googling, though it's been difficult to get relevent results with the word 'backup' and 'hgcookies' in my terms!
Any help, greatly appreciated.
Seems this was an issue with the KilnAuth extension. I'm not sure why it decided to store the cookies on the F: drive, but I manually created a 'backups' folder on that drive and that allowed it to store the cookie there with no problems.
I had some help from the FogCreek guys diagnosing this - I have to say I've never experienced such awesome customer service, really. Hats off to those guys!
I keep getting an "Executable '['git']' was not found in PATH. Current PATH" error message when trying GIT STATUS in Sublime Text 3. I have the SublimeGit plugin installed.
I have the following in my Package Settings > Settings - User
"git_executables": {
"git": ["/usr/local/bin/git"],
"git_flow": ["/usr/local/bin/git", "flow"],
"legit": ["legit"]
}
I have read https://docs.sublimegit.net/quickstart.html, but it does not go through windows paths.
Any help would be appreciated.
That error message can happen because of operations on a missing or moved file:
See issue 212 (for ST2, but possibly relevant for ST3).
Ok, I think why this bug happened.
There was a file that was moved to another location form outside ST2, and Git plugin failed to do something to the file because it no longer existed, but that situation was interpreted as missing git command.
Another workaround mentions:
Installing python via homebrew and restarting ST2 fixed this problem for me:
brew install python
Also, by David Gee -- davidagee :
On OS X Mountain Lion, the only way I was able to fix this, after trying everything in this thread, and additional mucking around with path settings, was to open "/Users/[me]/Library/Application Support/Sublime Text 2/Packages/Git/Git.sublime-settings" and to change git_command to "/usr/local/git/bin/git".
Adding a git_command setting to user prefs doesn't work.
The plugin seems to ignore the value when set in Preferences.sublime-settings.
I'm using easy mercurial. I have changed a computer, but still use same account for my repository. when I pushing things to my repository, it always failed.
The prompt said: A Mercurial command failed to run correctly. This may indicate an installation problem or some other problem with EasyMercurial.
More Detail showed: warning: code.soundsoftware.ac.uk certificate with fingerprint 74:51:c7:c4:9b:85:de:05:02:2f:9f:ec:7f:16:25:4c:68:48:74:7c not verified (check host finger prints or web.cacerts config setting)
I use windows 7 and the installation is correct. I re-installed it many times, but it always failed to push. Then I used my old computer, re-installed the Mercurial, but it also fail to push. But I can push things correctly in my old computer before I uninstalled Mercurial in it. And I didn't find solution in wiki for my problem. Could anyone help me? What should I do? That's an emergency, I need to solve this as soon as possible!
Thanks!
Based on your error message it seems that mercurial is not trusting the host you are trying to push to.
Try add this to your .hg/hgrc file in the top level of your repository (if it doesn't exist, create a file called hgrc (no extension) in the .hg directory and open it with a text editor and add this):
[hostfingerprints]
code.soundsoftware.ac.uk = 74:51:c7:c4:9b:85:de:05:02:2f:9f:ec:7f:16:25:4c:68:48:74:7c
If that works, you may want to add the same to %USERPROFILE%\Mercurial.ini if you are pushing to that server from multiple repositories.
reference: mercurial hgrc files hostfingerprints
Trying to configure Jenkins CI. Currently just running it from the .war (eventual intention as a service). Jenkins is aware of the CVS executable (i.e. will read the version [Concurrent Versions System (CVSNT) 2.0.62.1817 (client/server)]).
The .cvspass is not specified, because they apparently do not play nice with CVSNT (which prefers to keep passwords in the registry.) I've specified the password in the job config by using the :pserver:user:passg#server:/dir pattern for CVSROOT, which I found suggested in some places. Regardless of whether I run using that, or :pserver:userg#server:/dir as the CVSROOT I get the blinking red ball, jenkins stuck with a nearly full progress bar for 2 and a half minutes. It then fails. The console output yells with something like
FATAL: hudson.scm.ChangeLogSet.iterator()Ljava/util/Iterator;
java.lang.AbstractMethodError: hudson.scm.ChangeLogSet.iterator()Ljava/util/Iterator;
at hudson.model.AbstractBuild.getCulprits(AbstractBuild.java:282)
at hudson.model.AbstractBuild.getCulprits(AbstractBuild.java:279)
at hudson.model.AbstractBuild$AbstractRunner.post(AbstractBuild.java:596)
at hudson.model.Run.run(Run.java:1400)
at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46)
at hudson.model.ResourceController.execute(ResourceController.java:88)
at hudson.model.Executor.run(Executor.java:175)
Both CVSROOTs I'm using provide no trouble with TortoiseSVN. I've found some mention of difficult of logging into SVN from jenkins as a service and related user/system issues, but considering I'm running it from the .war I don't think that's the issue.
EDIT:
Interestingly the console log if I use an invalid user or password recognizes such.
cvs [checkout aborted]: authorization failed: server rejected access to /dir for user FOO
FATAL: CVS failed. exit code=1
Finished: FAILURE
which indicates that Hudson is talking to the CVS server and authenticating, but something else goes wrong.
/EDIT
Cheers
Answer to the question found, thanks to rpetti on #jenkins on freenode. Problem was I had switched between Hudson and Jenkins and there were some incompatible configuration files that were mucking things up. Deleting and recreating the home directory solved the problem.
CVSNT 2.0.62.1817 is very very old and has several known security issues. Please upgrade to the latest 2.8.01.
This is probably a simple problem and I'm feeling exceptionally dumb because I can't find a any kind of documentation.
I've just installed TeamCity 5 and I want to get files from my Mercurial hosting and there is two fields I just can't figure out.
HG Command path. What should I put here? The path to a file containing what? Can I get an example of that file somewhere?
The host is using Mercurial over SSH where do I define my private key?
Pull changes from? Should I put the address I'm cloning from i.e. ssh://username#myhost.something/project
I figured this out for my TeamCity 5 server last week.
HG Command path: HG
Pull changes from: https://bitbucket.org/.../.../
Don't put the username# in the URL. This is specificed as in the Username/Password fields. If you include the username in the URL it'll fail as there is a bug in the configuration tool. You'll also see a screenshot of the configuration attached to the thread:
http://www.jetbrains.net/devnet/message/5254640#5254640
I'd suggest getting things working with HTTPS and then moving to SSH if possible. This breaks things down into two easier to solve configuration problems. I used the following tutorial to get SSH going on my Windows client machine.
http://www.codza.com/mercurial-with-ssh-setup-on-windows
I've not set this up on my TeamCity server yet. However I did get TeamCity to pick up my Mercurial.ini settings by putting the ini file in \Documents and Settings\TeamCity, which is the account the service runs under.
I've not used team city, but I think hg command path is probably the full path to your local mercurial executable. For me (on linux) that's:
$ type hg
hg is /usr/bin/hg
On windows it's where the 'hg' executable in your system path was placed by whichever (of the many) windows installers for mercurial you used.
Pull changes from sounds like the URL to the repo, so:
ssh://username#myhost.something/project
or
ssh://username#myhost.something//project # note the _two_ double slashes
if you're using absolute paths on the server side.
Your private key location/specification depends on what you're using for ssh and whether or not you're running ssh-agent, but here's a links that explicitly points from within mercurial.ini, which seems sound:
http://dev.openttdcoop.org/projects/home/wiki/Configuring_TortoiseHg_(Windows)#Pointing-to-you-Private-key