Access denied for root user in MySQL command-line - mysql

I've just installed xampp, and am using command line to write mySQL.
I am using 'root' with no password and can connect to mysql but cannot CREATE DATABASE as I get the error 1044 access denied for user '' # 'localhost'. I am logged in as -uroot.
I have privileges in phpMyadmin to do what I want, but, in command line I seem to have no write privileges. I've looked at all the other related posts on this topic but to no avail. I cannot GRANT privileges as I have none anyway.

Are you logging into MySQL as root? You have to explicitly grant privileges to your "regular" MySQL user account while logged in as MySQL root.
First set up a root account for your MySQL database.
In the terminal type:
mysqladmin -u root password 'password'
To log into MySQL, use this:
mysql -u root -p
To set the privileges manually start the server with the skip-grant-tables option, open mysql client and manually update the mysql.user table and/or the mysql.db tables. This can be a tedious task though so if what you need is an account with all privs I would do the following.
Start the server with the skip-grant-tables option
Start mysql client (without a username/password)
Issue the command
flush privileges;
which forces the grant tables to be loaded.
Create a new account with the GRANT command something like this (but replacing username and password with whatever you want to use.
GRANT ALL on *.* to 'username'#'localhost' identified by 'password';
Restart the server in normal mode (without skip-grant-tables) and log in with your newly created account.
Refer this MySQL docs.

navigate do C:\xampp\mysql\bin\ and make sure the file mysql.exe is in that folder.
mysql -uroot -p
if dont have a password just press enter.
the prompt changes to
mysql>
do your mysql commands

By default there is no password is set for root user in XAMPP.
You can set password for root user of MySQL.
Navigate to
localhost:80/security/index.php
and set password for root user.
Note:Please change the port number in above url if your Apache in on different port.
Open XAMPP control panel Click "Shell" button
Command prompt window will open now in that window type
mysql -u root -p;
It will ask for password type the password which you have set for root user.
There you go ur logged in as root user :D Now do what u want to do :P

Gain access to a MariaDB 10 database server
After stopping the database server, the next step is to gain access to the server through a backdoor by starting the database server and skipping networking and permission tables. This can be done by running the commands below.
sudo mysqld_safe --skip-grant-tables --skip-networking &
Reset MariaDB root Password
Now that the database server is started in safe mode, run the commands below to logon as root without password prompt. To do that, run the commands below
sudo mysql -u root
Then run the commands below to use the mysql database.
use mysql;
Finally, run the commands below to reset the root password.
update user set password=PASSWORD("new_password_here") where User='root';
Replace new_password _here with the new password you want to create for the root account, then press Enter.
After that, run the commands below to update the permissions and save your changes to disk.
flush privileges;
Exit (CTRL + D) and you’re done.
Next start MariaDB normally and test the new password you just created.
sudo systemctl stop mariadb.service
sudo systemctl start mariadb.service
Logon to the database by running the commands below.
sudo mysql -u root -p
source: https://websiteforstudents.com/reset-mariadb-root-password-ubuntu-17-04-17-10/

I had the same issue, and it turned out to be that MariaDB was set to allow only root to log in locally via the unix_socket plug-in, so clearing that setting allowed successfully logging in with the user specified on the command line, provided a correct password is entered, of course.
See this answer on Ask Ubuntu

I re-installed the ODBC connector msi and re-installed mySQL directly (aside from xampp) and it now works. It was a connector problem I think, as SHOW DATABASES wasn't actually showing my databases at all.
My 'root' login wasn't getting access to the DB, which made it seem like it had limited priviliges but it actually wasn't connected properly.

Server file only change name folder
etc/mysql
rename
mysql-

this might help on Ubuntu:
go to /etc/mysql/my.cnf and comment this line:
bind-address = 127.0.0.1
Hope this helps someone, I've been searching for this a while too
Cheers

You mustn't have a space character between -u and the username:
mysql -uroot -p
# or
mysql --user=root --password

Related

Mysql : using mysql_secure_installation on Ubuntu 22 while keeping auth_socket authentication plugin for the root user

So, I'm trying to install Mysql on an Ubuntu 22, and after installing the packages and running the server, I'm at the point where it's recommended to use the mysql_secure_installation command.
This command automates some security steps. Amongst others, it drops the test database and asks for a password for the root user.
However, the latest Mysql version I'm trying to install (8.0.29), has the "auth_socket" plugin, by default, for root user authentication, and it's a good thing, which I'd like to keep.
But, when I launch mysql_secure_installation, I'm asked for a root password, and when I try to give one, I get :
Failed! Error: SET PASSWORD has no significance for user 'root'#'localhost' as the authentication method used doesn't store authentication data in the MySQL server.
Which is normal because I try to give a password for an authentication method that doesn't require one.
But then, I'm stuck, because mysql_secure_installation cannot proceed further.
I know that I can ALTER my root user in the relevant Mysql table, giving it a password and a "mysql_native_password" authentication plugin, but I don't want to do that.
I'd like to keep the "auth_socket" authentication plugin while executing mysql_secure_installation until the end.
Is there any way to do that ?
---TL;DR:
# Login to MySQL
mysql
ALTER USER 'root'#'localhost' IDENTIFIED BY 'Insert Very Secret Here';
mysql_secure_installation;
echo "plugin-load-add=auth_socket.so" >> /etc/mysql/mysql.conf.d/mysqld.cnf;
systemctl restart mysql;
mysql -u root -p
# Use password previously chosen, a.k.a. 'Insert Very Secret Here'
ALTER USER root#localhost IDENTIFIED WITH auth_socket;
---Explanation
Try the following:
ALTER your root user to have a password (temporarily);
Run mysql_secure_installation and complete it successfully;
At this point, you should have a MySQL root account with a password and a server with the required security measures implemented.
Edit /etc/mysql/mysql.conf.d/mysqld.cnf and add towards its end the line:
plugin-load-add=auth_socket.so
This will allow the "passwordless" socket authentication.
Restart MySQL systemctl restart mysql.
Login to MySQL, using the root password you previously specified by running mysql -p (Provided you're logged in as root, otherwise run mysql -u root -p).
Execute the following query:
ALTER USER root#localhost IDENTIFIED WITH auth_socket;
You're all set: you have a password-enabled MySQL root account that uses socket authentication as well.

MySQL Workbench on Linux

I installed MySQL on Ubuntu 16.04. I can login to MySQL shell by typing the command:
sudo mysql -u root
However, I also want to see the DB via MySQL Workbench. I installed it on my computer, and when I go to Database -> Connect to Database I get the following window:
When I click 'OK' I get the following dialog:
I checked 1 and 2. 3 I don't know how to check and as for 4, I don't know what is the password at all (I don't have to use it to login via the console).
Do you know how to resolve it?
Firstly never work with root on a server. Period it is a bad habit. So first things first would be to log into the command line and create a user that is the root equivalent and then use that user.
So use the command line and then execute the following steps:
CREATE USER 'username'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'username'#'%'
WITH GRANT OPTION;
FLUSH PRIVILEGES;
This will create an administrative user called username. You can then use this account to log in. Get in the habit of doing this.
Use terminal login mysql
sudo mysql -u root
Initial root password
update user set password=PASSWORD(‘123456’) where User='root';
And then try workbench login again.
If you want to connect mysql service from any others host except localhost,
you need set root host to %
mysql -u root –p
mysql>use mysql;
mysql>update user set host = '%' where user = 'root';
mysql>select host, user from user; --check result,init value maybe 127.0.0.1 or localhost
I think that I found the problem. When I installed MySQL, I skipped the option to give a password to root user. Therefore, I decided to remove MySQL from my linux by using the command:
apt-get purge mysql mysql-server mysql-common mysql-client
and then re-install it by:
apt-get install mysql-server
This time, I gave a password to root user during the installation, and after the installation had been finished, I opened MySQL Workbench and used the password I gave during the installation.

Mysql and phpmyadmin installation in RaspberryPi 3

I am trying to install mysql and phpmyadmin in my raspberrypi 3. I have followed many tutorials on the internet and specifically this link
https://www.youtube.com/watch?v=ozo_npQMQS8
now the problem is that while installing mysql i dont get any window in the command line asking for the password hence i am not able to set the root password..
I am able to get into mysql by "sudo"
sudo mysql -u root
but i am not able to login through the password.
the situation is same for the phpmyadmin. the installation is correct but i am not able to login with the password.
Thanks
So i figure out the problem is with the plugin. so i have to set the plugin to mysql_native_password.
To check the plugin type
USE mysql;
SELECT User, Host, plugin FROM mysql.user;
You may see that mysql_native_password is not there..
so to setup you may write these commands..
sudo mysql -u root
mysql> USE mysql;
mysql> UPDATE user SET
plugin='mysql_native_password' WHERE User='root'; mysql> FLUSH
PRIVILEGES; mysql> exit;
$ service mysql restart
So now you will be able to login both in phpmyadmin and in console through root password.
You shouldn't need 'sudo' because the -u in mysql -u root specifies the user account with which to connect (and the 'mysql' command should be available for all users, not just root; if not check your path). The reason you're not being prompted for a password is because you haven't told MySQL to use a password when connecting, to do that use -p like mysql -u root -p.
If you didn't set a password during installation, then there shouldn't be a password in which case mysql -u root should have worked for you. Once you've connected, you could set a password (which you probably ought to do for the two user accounts with username root and host '%' and 'localhost' (there may also be one for an IPv6 address). After setting the password, of course you'll need to use it when logging in with the -p flag.
If you're having trouble with phpMyAdmin, show us the error message and relevant part of your configuration file (config.inc.php).

Unable to access MySQL after it automatically generated a temporary password

I have erased and installed OSX 10.11 El Capitan and I have been following through this tutorial to get MySQL up and running on the new OS X. The first step was to download MySQL For Mac OS X 10.9 (x86, 64-bit), DMG Archive (works on 10.11, they recommended in the tutorial). While I were finishing installing the MySQL, I got the message saying that :
2015-10-25T02:10:54.549219Z 1 [Note] A temporary password is generated for root#localhost: R>gFySuiu23U
If you lose this password, please consult the section How to Reset the Root Password in the MySQL reference manual.
That was weird, I have never seen that kind of message. After that, I started MySQL via the Preference Pane and then use /usr/local/mysql/bin/mysql -v command on the terminal for another step. I got an error message saying that :
ERROR 1045 (28000): Access denied for user 'cheetah'#'localhost' (using password: NO)
I have also tried to access database through Sequel Pro using root as username and blank password, I got access denied message saying that :
Unable to connect to host 127.0.0.1 because access was denied.
Double-check your username and password and ensure that access from your current location is permitted.
MySQL said: Access denied for user 'root'#'localhost' (using password: NO)
Okay, I also tried this again using root as a username but 'R>gFySuiu23U' as a password (which was generated from MySQL). I got connection failed message saying that :
Unable to connect to host 127.0.0.1, or the request timed out.
Be sure that the address is correct and that you have the necessary privileges, or try increasing the connection timeout (currently 10 seconds).
MySQL said: Your password has expired. To log in you must change it using a client that supports expired passwords.
How could I solve this problem? I remember that MySQL has never got automatically generated a temporary password like this, hasn't it ?
Try this:
mysql -u root -h 127.0.0.1 -p
Enter password: (enter the random password here)
Ref:https://dev.mysql.com/doc/refman/5.7/en/data-directory-initialization-mysqld.html
Following this, you may reset your password using
ALTER USER 'root'#'localhost' IDENTIFIED BY 'new-password';
This is what worked for me on OS X Yosemite running MySql v5.7 (installed from the .dmg).
cd /usr/local/mysql/bin
./mysql -u root -p --connect-expired-password
(Enter the temporary password generated by the installer.)
This gets you into sandbox mode and mysql> prompt. Then set desired root password with SET PASSWORD:
SET PASSWORD FOR 'root'#'localhost' = PASSWORD('mySuperSecretPassword');
Now that the password MySQL had generated is expired, the problem is reduced to getting this password to work again (1) or generate a new one (2). This can be accomplished by running MySQL with the skip-grant-tables option which would make it ignore the access rights:
Stop your MySQL server.
Add the below at the end of the [mysqld] section of my.cnf file and save it.
skip-grant-tables
Start MySQL server.
In terminal, type
mysql -u root -p
to get into MySQL command prompt.
In the command prompt, type
USE mysql;
to get into the mysql database where it keeps database users.
Type
UPDATE user SET password_expired = 'N' WHERE User = 'root';
to let MySQL know the password is not expired (1) or
UPDATE user SET authentication_string = PASSWORD('YourNewPassword'), password_expired = 'N' WHERE User = 'root';
to assign a new password YourNewPassword to root (2).
Doing these steps under OSX 10.11 El Capitan and MySQL 5.7.X, should do the trick.
Considering that you already have MySQL installed then..
Open a terminal window and type:
sudo /usr/local/mysql/support-files/mysql.server stop
sudo mysqld_safe --skip-grant-tables
Since the command fired in the step 2 will be under on going state, you need to open another terminal window and then type:
mysql -u root -p
UPDATE mysql.user SET password_expired='N', authentication_string=PASSWORD('') WHERE User='root';
quit;
sudo /usr/local/mysql/support-files/mysql.server restart
Important: in the step 2 you must replace for your password.
Hope it will wok for you.
MySQL password expired
Resetting the password will solve the problem temporarily, however, from MySQL 5.7.4 to 5.7.10 (I think to encourage better security) the default value for the default_password_lifetime variable is 360 (about a year). For those versions, if you make no changes to this variable (or to individual user accounts) all user passwords expire after 360 days.
Typically, from a script you might get the message: "Your password has expired. To log in you must change it using a client that supports expired passwords."
So, to prevent automatic password expiry, log in as root (mysql -u root -p), then, for clients that automatically connect to the server (e.g. scripts.) change the password expiration settings for those clients:
ALTER USER 'script'#'localhost' PASSWORD EXPIRE NEVER;
or you can disable automatic password expiration for all users:
SET GLOBAL default_password_lifetime = 0;
Links:
MySQL: Password Expiration and Sandbox Mode
MySQL: Password Expiration Policy
Password expiration policy in MySQL Server 5.7
I'm running macOS Sierra(10.12.3) and I installed mysql-5.7.17-macos10.12-x86_64.dmg.
The answer from #lesley worked for me with the exception that I needed to add ./ to ensure I was calling the mysql binary in my current working directory. Which is where the aforementioned package was installed.
If you cd to /usr/local/mysql/bin and run mysql -u root -p --connect-expired-password, you could receive the following error.
mysql: unknown option '--connect-expired-password'
I did. Because simply running mysql without providing a path, called a previously installed version of the MariaDB client.
So to ensure you are executing the correct binary, you can either
provide the absolute path
/usr/local/mysql/bin/mysql -u root -p --connect-expired-password
or the relative path after changing directories
cd /usr/local/mysql/bin
./mysql -u root -p --connect-expired-password
Both ways should work. Once you are connected to the client, the instruction are the same as above from #lesley.
Enter your temporary password generated by the installer and set your new password.
SET PASSWORD FOR 'root'#'localhost' = PASSWORD('yourNewPassword');
I faced the same problem. I followed the installation process guide from https://www.ntu.edu.sg/home/ehchua/programming/sql/MySQL_HowTo.html and downloaded DMG archive and installed MySQL on my MAC OS X 10.12.2.
Finally executed the following commands on new Terminal.
cd /usr/local/mysql/bin
./mysql -u root -p --connect-expired-password
It worked.
Answer 7 worked for me: El capitan, MySQL installed from dmg and autogenerated password, but made sure to cd to /usr/local/bin/mysql before entering ./mysql -root -p Obvious, but I didn't the first time.
Now to find where all my databases and tables are and how to link them in.
For Mysql 5.7 I use
shell $ > sudo grep 'temporary password' /var/log/mysqld.log
This particular one did the trick for me:
As specified in this link: https://www.variphy.com/kb/mac-os-x-reset-mysql-root-password
Do all the steps except executing
UPDATE mysql.user SET Password=PASSWORD('NewPassword') WHERE User='root';
Execute
UPDATE mysql.user
SET authentication_string = PASSWORD('MyNewPass'), password_expired = 'N'
WHERE User = 'root' AND Host = 'localhost';
And then execute
FLUSH PRIVILEGES;
The another way to solve this issue is to use an older version of MySQL instead.
I have uninstalled MySQL version 5.7.9 for Mac OS X 10.9 (x86, 64-bit), DMG Archive and then install the older version, MySQL version 5.6.7 for Mac OS X 10.9 (x86, 64-bit), DMG Archive. This issue is solved. The given autogenerated password before finishing installation of this older version is gone and I can ultimately access the database using root as username and a blank password. Everything is working like a charm!
I installed view brew, and I had the same error message until I noticed this caveat:
We've installed your MySQL database without a root password. To secure it run:
mysql_secure_installation
To connect run:
mysql -uroot
To have launchd start mysql now and restart at login:
brew services start mysql
Or, if you don't want/need a background service you can just run:
mysql.server start
I got around this problem by running
'mysql -u root -p --connect-expired-password'
Then input the expired auto-gen password from mysql. Finally got in. Selected mysql db with
'use mysql'
and then updated user 'root' pw with
'ALTER USER 'root'#'localhost' IDENTIFIED BY 'your new password'
Installing MySQL manually by downloading packages for the first time generates a default password for root. Copy and save that. If not done somehow on successive re-installations it does not show that password.
Thus you cannot login to root.
Do the following :
Find mysql related entries from system
sudo find / -name mysql
Remove all mysql related entries by doing rm -rf <mysql_entries_above>
Download latest mysql-server and intall it.
You will be promted with a default password which you need to copy.
Run mysql_secure_installation and paste that password when asked for root.
Subsequently follow the steps and change admin password when prompted for.
Restarting Mysql server worked for me.
But in Mysql80-Server, it is more complicated than 5.7. In MySQL80 not allow you to update or change password during the config in my.cnf in state "skip grant table". So you need 3 big steps to do
I) change my.cnf to skip-grant-table
II) login MySQL with blank password & update table to blank password
III) restart mysql and login with blank password and update to new password
Step to do: (whatever, you forgot root password, temporary password gen by installation not work, etc. please follow the steps below) In my case on FreeBSD 12.2
stop your mysql server by
/usr/local/etc/rc.d/mysql-server stop
recheck again whether it is really stop (in case more serious problem than that)
/usr/local/etc/rc.d/mysql-server status
mysql is not running.
find your my.cnf file and add "skip-grant-tables" to it.
(normally before [Mysqldump] head)
restart mysql
/usr/local/etc/rc.d/mysql-server start
login to mysql
mysql -u root -p
when it ask for password, just press enter and you will log into mysql
select DB to use
use mysql
look at the table user
select user, authentication_string,password_expired from user;
update to blank password
UPDATE user SET authentication_string = '', password_expired='N' WHERE User = 'root';
quit mysql and make mysql stop
goto file my.cnf then take "skip-grant-tables" out of file.
restart mysql again with "mysql -u root -p" enter the blank password
then
ALTER USER 'root'#'localhost' IDENTIFIED WITH
caching_sha2_password BY 'YourNewPassword';
quit mysql and make mysql stop
restart mysql again then you will login with your new password
This may happens when you have installed mysql before.
Try the password you set for the last version of mysql.
This did work for me.

How to change the mysql root password

I have installed MySQL server 5 on redhat linux. I can't login as root so I can't change the root password.
mysql -u root -p
Enter password: <blank>
ERROR 1045 (28000): Access denied for user 'root'#'localhost'
(using password: NO)
When I try to set one like this:
mysqladmin -u root password 'newpass'
I get an error:
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'#'localhost'
(using password: NO)'
As if there is a root password set.
I have also tried resetting the password using (described here)
/sbin/service mysqld start --skip-grant-tables
And then making:
mysql> UPDATE mysql.user SET Password=PASSWORD('newpass')
-> WHERE User='root';
ERROR 1142 (42000): UPDATE command denied to user ''#'localhost' for table 'user'
I even uninstalled mysql-server (using yum) and then reinstalled it but that did not help.
How do I force reset the root password?
One option is to save UPDATE mysql.user SET Password=PASSWORD('newpass') WHERE User='root'; into a file and then manually start mysqld with --init-file=FILENAME. Once the server starts, it should reset your password, and then you should be able to log in. After this, you should shut down the server and start it normally.
A little late to the game, but I had the same issue on a raspberry pi install and found out that it needs elevation. Adding a sudo to the front of the password change allowed it to work.
sudo mysqladmin -u root password 'newpass'
followed by an elevated sql access
sudo mysql -u root -p
If either are not run as sudo, it will fail.
The root user password is an empty string by default.
And (using password: NO) says that there is no password.
Do you try to login from another system? I imagine you can only login as root user locally.
I removed the MySQL installation and deleted the data files, and then reinstalled it.
Then I was able to set the root password. Once you set the root password to something. mysqladmin won't let you reset it if you don't know it.
To reset it, you've got to have ownership over how mysqld is executed, and feed it an init file to change the root password:
https://dev.mysql.com/doc/refman/5.0/en/resetting-permissions.html
This helped me on Windows with MySQL Server 5.6. Make sure you change the mysqld path to point to where you have installed MySql Server, for me it was "C:\Program Files\mysql\MySQL Server 5.6\bin\mysqld.exe":
Log on to your system as Administrator.
Stop the MySQL server if it is running. For a server that is
running as a Windows service, go to the Services manager:
From the Start menu, select Control Panel, then
Administrative Tools, then Services. Find the MySQL
service in the list and stop it.
If your server is not running as a service, you may need to use
the Task Manager to force it to stop.
Create a text file containing the following statements.
Replace the password with the password that you want to use.
UPDATE mysql.user SET Password=PASSWORD('MyNewPass') WHERE User='root';
FLUSH PRIVILEGES;
Write the UPDATE and FLUSH statements each on a single line. The UPDATE statement resets the password for all root accounts, and the FLUSH statement tells the server to reload the grant tables into memory so that it notices the password change.
Save the file. For this example, the file will be named C:\mysql-init.txt.
Open a console window to get to the command prompt: From the Start menu, select Run, then enter cmd as the command to be run.
Start the MySQL server with the special --init-file option (notice that the backslash in the option value is doubled):
C:\> C:\mysql\bin\mysqld --init-file=C:\\mysql-init.txt
If you installed MySQL to a location other than C:\mysql, adjust the command accordingly.
The server executes the contents of the file named by the --init-file option at startup, changing each root account password.
You can also add the --console option to the command if you want server output to appear in the console window rather than in a log file.
If you installed MySQL using the MySQL Installation Wizard, you may need to specify a --defaults-file option:
C:\> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld.exe"
--defaults-file="C:\\Program Files\\MySQL\\MySQL Server 5.5\\my.ini"
--init-file=C:\\mysql-init.txt
The appropriate --defaults-file setting can be found using the Services Manager: From the Start menu, select Control Panel, then Administrative Tools, then Services. Find the MySQL service in the list, right-click it, and choose the Properties option. The Path to executable field contains the --defaults-file setting.
After the server has started successfully, delete C:\mysql-init.txt.
http://docs.oracle.com/cd/E17952_01/refman-5.5-en/resetting-permissions.html
Remove the -p from your command. -p forces the prompt for password.
Use :
mysql -u root
This will resolve your problem.
Probably a bit late here , but here is what I did :
create file resetpass.sh which has :
UPDATE mysql.user SET Password=PASSWORD('newpassword') WHERE User='root';
# mysqld_safe --init-file=resetpass.sh
# service mysqld start --skip-grant-tables
# mysql -u root -p
Enter pass
mysql > change root pass ; flush privs;
quit
# restart mysql service
The MySQL version I was using was 5.1.73 under centos6
Try do this:
mysql -u root
and then:
mysql> UPDATE mysql.user SET Password=PASSWORD('MyNewPass')
-> WHERE User='root';
mysql> FLUSH PRIVILEGES;
Worked fine for me!
According to the docs, in MySQL 5.7 the temp password gets put in /var/log/mysqld, but this is evidently not the case in 5.6.
With MySQL version 5.6 installed on RHEL 6.7, I finally found the temporary root password set during install was placed in the file /root/.mysql_secret.
open mysql
now enter the following commands :
use mysql;
update user set PASSWORD=password("updated password") where User='root';
flush privileges;