I am currently designing a database structure for the products section of an ecommerce platform. It needs to be designed in such a way that makes it possible to sell an infinite number of different types of products with an infinite number of different attributes.
E.g. The attributes of a laptop would be RAM, Screen Size, Weight, etc. The attributes of a book would be Author, ISBN, Publisher, etc.
It seems like an EAV structure would be most suitable.
Select a product
Product belongs to attribute set
Attribute set contains attributes x and y
Attribute x is data type datetime (values stored in attribute_values_datetime)
Attribute y is data type int (values stored in attribute_values_int)
Each attribute definition denotes the type (i,e, x has column type -> datetype)
Assuming the above, could I join the selection to the attribute_values_datetime table to get the right data without getting the result set and building a second query now that the table is known? Would there be a large performance hit constructing a query of this type or would the below be more suitable (although less functional)
Select a product
Product belongs to attribute set
Attribute set contains attributes x and y
Attribute x is data type datetime but stored as TEXT in attribute_values
Attribute y is data type int but stored as TEXT in attribute_values
I'm going to offer a contrary opinion to most of the comments on this question. While EAV is EVIL for all of the reasons that you can find thoroughly explained many times here on SO and DBA.SE and elsewhere, there is one really common application for which most of the things that are wrong with EAV are largely irrelevant and the (few) advantages of EAV are very much germane. That application is online product catalogs.
The main problem with EAV is that it doesn't let the database do what it is really good at doing, which is helping to give proper context to different attributes of information about different entities by arranging them in a schema. Having a schema brings many, many advantages around accessing, interpreting and enforcing integrity of your data.
The fact about product catalogs is that the attributes of a product are almost entirely irrelevant to the catalog system itself. Product catalog systems do (at most) three things with product attributes.
Display the product attributes in a list to end users in the form: {attribute name}: {attribute value}.
Display the attributes of multiple products in a comparison grid where attributes of different products line up against each other (products are usually columns, attributes are usually rows)
Drive rules for something (e.g. pricing) based on particular attribute/value combinations.
If all your system does is regurgitate information that is semantically irrelevant (to the system) then the schema for this information is basically unhelpful. In fact the schema gets in the way in an online product catalog, especially if your catalog has many diverse types of products, because you're always having to go back into the schema to tinker with it to allow for new product categories or attribute types.
Because of how it's used, even the data type of an attribute value in a product catalog is not necessarily (vitally) important. For some attributes you may want to impose contraints, like "must be a number" or "must come from this list {...}". That depends on how important attribute consistency is to your catalog and how elaborate you want your implementation to be. Looking at the product catalogs of several online retailers I'd say most are prepared to trade off simplicity for consistency.
Yes, EAV is evil, except when it isn't.
Yes, there is typically a large penalty in assembling the queries for an EAV model. There are bigger performance penalties for checking the self-consistency of the data, because the DBMS is not going to be able to do it for you. If something goes wrong, the DBMS cannot tell you.
With a more orthodox database design, as recommended by Oded in comments, the DBMS ensures that the data in the database is more nearly consistent. I would strongly counsel the use of a regular (non-EAV) design.
I do not know if this should be a comment or answer. Nevertheless here I go.
I do not know exactly what are you building. But have you taken a look into Magento EAV database structure? Yes, it can be slow, queries can be huge but for us the pluses are more than the minus. And on the other hand magento takes care of the queries.
We are in the middle of a migration of our online store (medium-big size store) to use Magento and for now we are very happy with the EAV approach.
Related
I do not have much experience in table design. My goal is to create one or more product tables that meet the requirements below:
Support many kinds of products (TV, Phone, PC, ...). Each kind of product has a different set of parameters, like:
Phone will have Color, Size, Weight, OS...
PC will have CPU, HDD, RAM...
The set of parameters must be dynamic. You can add or edit any parameter you like.
How can I meet these requirements without a separate table for each kind of product?
You have at least these five options for modeling the type hierarchy you describe:
Single Table Inheritance: one table for all Product types, with enough columns to store all attributes of all types. This means a lot of columns, most of which are NULL on any given row.
Class Table Inheritance: one table for Products, storing attributes common to all product types. Then one table per product type, storing attributes specific to that product type.
Concrete Table Inheritance: no table for common Products attributes. Instead, one table per product type, storing both common product attributes, and product-specific attributes.
Serialized LOB: One table for Products, storing attributes common to all product types. One extra column stores a BLOB of semi-structured data, in XML, YAML, JSON, or some other format. This BLOB allows you to store the attributes specific to each product type. You can use fancy Design Patterns to describe this, such as Facade and Memento. But regardless you have a blob of attributes that can't be easily queried within SQL; you have to fetch the whole blob back to the application and sort it out there.
Entity-Attribute-Value: One table for Products, and one table that pivots attributes to rows, instead of columns. EAV is not a valid design with respect to the relational paradigm, but many people use it anyway. This is the "Properties Pattern" mentioned by another answer. See other questions with the eav tag on StackOverflow for some of the pitfalls.
I have written more about this in a presentation, Extensible Data Modeling.
Additional thoughts about EAV: Although many people seem to favor EAV, I don't. It seems like the most flexible solution, and therefore the best. However, keep in mind the adage TANSTAAFL. Here are some of the disadvantages of EAV:
No way to make a column mandatory (equivalent of NOT NULL).
No way to use SQL data types to validate entries.
No way to ensure that attribute names are spelled consistently.
No way to put a foreign key on the values of any given attribute, e.g. for a lookup table.
Fetching results in a conventional tabular layout is complex and expensive, because to get attributes from multiple rows you need to do JOIN for each attribute.
The degree of flexibility EAV gives you requires sacrifices in other areas, probably making your code as complex (or worse) than it would have been to solve the original problem in a more conventional way.
And in most cases, it's unnecessary to have that degree of flexibility. In the OP's question about product types, it's much simpler to create a table per product type for product-specific attributes, so you have some consistent structure enforced at least for entries of the same product type.
I'd use EAV only if every row must be permitted to potentially have a distinct set of attributes. When you have a finite set of product types, EAV is overkill. Class Table Inheritance would be my first choice.
Update 2019: The more I see people using JSON as a solution for the "many custom attributes" problem, the less I like that solution. It makes queries too complex, even when using special JSON functions to support them. It takes a lot more storage space to store JSON documents, versus storing in normal rows and columns.
Basically, none of these solutions are easy or efficient in a relational database. The whole idea of having "variable attributes" is fundamentally at odds with relational theory.
What it comes down to is that you have to choose one of the solutions based on which is the least bad for your app. Therefore you need to know how you're going to query the data before you choose a database design. There's no way to choose one solution that is "best" because any of the solutions might be best for a given application.
#StoneHeart
I would go here with EAV and MVC all the way.
#Bill Karvin
Here are some of the disadvantages of
EAV:
No way to make a column mandatory (equivalent of NOT NULL).
No way to use SQL data types to validate entries.
No way to ensure that attribute names are spelled consistently.
No way to put a foreign key on the values of any given attribute, e.g.
for a lookup table.
All those things that you have mentioned here:
data validation
attribute names spelling validation
mandatory columns/fields
handling the destruction of dependent attributes
in my opinion don't belong in a database at all because none of databases are capable of handling those interactions and requirements on a proper level as a programming language of an application does.
In my opinion using a database in this way is like using a rock to hammer a nail. You can do it with a rock but aren't you suppose to use a hammer which is more precise and specifically designed for this sort of activity ?
Fetching results in a conventional tabular layout is complex and
expensive, because to get attributes
from multiple rows you need to do JOIN
for each attribute.
This problem can be solved by making few queries on partial data and processing them into tabular layout with your application. Even if you have 600GB of product data you can process it in batches if you require data from every single row in this table.
Going further If you would like to improve the performance of the queries you can select certain operations like for e.g. reporting or global text search and prepare for them index tables which would store required data and would be regenerated periodically, lets say every 30 minutes.
You don't even need to be concerned with the cost of extra data storage because it gets cheaper and cheaper every day.
If you would still be concerned with performance of operations done by the application, you can always use Erlang, C++, Go Language to pre-process the data and later on just process the optimised data further in your main app.
If I use Class Table Inheritance meaning:
one table for Products, storing attributes common to all product types. Then one table per product type, storing attributes specific to that product type.
-Bill Karwin
Which I like the best of Bill Karwin's Suggestions.. I can kind of foresee one drawback, which I will try to explain how to keep from becoming a problem.
What contingency plan should I have in place when an attribute that is only common to 1 type, then becomes common to 2, then 3, etc?
For example: (this is just an example, not my real issue)
If we sell furniture, we might sell chairs, lamps, sofas, TVs, etc. The TV type might be the only type we carry that has a power consumption. So I would put the power_consumption attribute on the tv_type_table. But then we start to carry Home theater systems which also have a power_consumption property. OK its just one other product so I'll add this field to the stereo_type_table as well since that is probably easiest at this point. But over time as we start to carry more and more electronics, we realize that power_consumption is broad enough that it should be in the main_product_table. What should I do now?
Add the field to the main_product_table. Write a script to loop through the electronics and put the correct value from each type_table to the main_product_table. Then drop that column from each type_table.
Now If I was always using the same GetProductData class to interact with the database to pull the product info; then if any changes in code now need refactoring, they should be to that Class only.
You can have a Product table and a separate ProductAdditionInfo table with 3 columns: product ID, additional info name, additional info value. If color is used by many but not all kinds of Products you could have it be a nullable column in the Product table, or just put it in ProductAdditionalInfo.
This approach is not a traditional technique for a relational database, but I have seen it used a lot in practice. It can be flexible and have good performance.
Steve Yegge calls this the Properties pattern and wrote a long post about using it.
I do not have much experience in table design. My goal is to create one or more product tables that meet the requirements below:
Support many kinds of products (TV, Phone, PC, ...). Each kind of product has a different set of parameters, like:
Phone will have Color, Size, Weight, OS...
PC will have CPU, HDD, RAM...
The set of parameters must be dynamic. You can add or edit any parameter you like.
How can I meet these requirements without a separate table for each kind of product?
You have at least these five options for modeling the type hierarchy you describe:
Single Table Inheritance: one table for all Product types, with enough columns to store all attributes of all types. This means a lot of columns, most of which are NULL on any given row.
Class Table Inheritance: one table for Products, storing attributes common to all product types. Then one table per product type, storing attributes specific to that product type.
Concrete Table Inheritance: no table for common Products attributes. Instead, one table per product type, storing both common product attributes, and product-specific attributes.
Serialized LOB: One table for Products, storing attributes common to all product types. One extra column stores a BLOB of semi-structured data, in XML, YAML, JSON, or some other format. This BLOB allows you to store the attributes specific to each product type. You can use fancy Design Patterns to describe this, such as Facade and Memento. But regardless you have a blob of attributes that can't be easily queried within SQL; you have to fetch the whole blob back to the application and sort it out there.
Entity-Attribute-Value: One table for Products, and one table that pivots attributes to rows, instead of columns. EAV is not a valid design with respect to the relational paradigm, but many people use it anyway. This is the "Properties Pattern" mentioned by another answer. See other questions with the eav tag on StackOverflow for some of the pitfalls.
I have written more about this in a presentation, Extensible Data Modeling.
Additional thoughts about EAV: Although many people seem to favor EAV, I don't. It seems like the most flexible solution, and therefore the best. However, keep in mind the adage TANSTAAFL. Here are some of the disadvantages of EAV:
No way to make a column mandatory (equivalent of NOT NULL).
No way to use SQL data types to validate entries.
No way to ensure that attribute names are spelled consistently.
No way to put a foreign key on the values of any given attribute, e.g. for a lookup table.
Fetching results in a conventional tabular layout is complex and expensive, because to get attributes from multiple rows you need to do JOIN for each attribute.
The degree of flexibility EAV gives you requires sacrifices in other areas, probably making your code as complex (or worse) than it would have been to solve the original problem in a more conventional way.
And in most cases, it's unnecessary to have that degree of flexibility. In the OP's question about product types, it's much simpler to create a table per product type for product-specific attributes, so you have some consistent structure enforced at least for entries of the same product type.
I'd use EAV only if every row must be permitted to potentially have a distinct set of attributes. When you have a finite set of product types, EAV is overkill. Class Table Inheritance would be my first choice.
Update 2019: The more I see people using JSON as a solution for the "many custom attributes" problem, the less I like that solution. It makes queries too complex, even when using special JSON functions to support them. It takes a lot more storage space to store JSON documents, versus storing in normal rows and columns.
Basically, none of these solutions are easy or efficient in a relational database. The whole idea of having "variable attributes" is fundamentally at odds with relational theory.
What it comes down to is that you have to choose one of the solutions based on which is the least bad for your app. Therefore you need to know how you're going to query the data before you choose a database design. There's no way to choose one solution that is "best" because any of the solutions might be best for a given application.
#StoneHeart
I would go here with EAV and MVC all the way.
#Bill Karvin
Here are some of the disadvantages of
EAV:
No way to make a column mandatory (equivalent of NOT NULL).
No way to use SQL data types to validate entries.
No way to ensure that attribute names are spelled consistently.
No way to put a foreign key on the values of any given attribute, e.g.
for a lookup table.
All those things that you have mentioned here:
data validation
attribute names spelling validation
mandatory columns/fields
handling the destruction of dependent attributes
in my opinion don't belong in a database at all because none of databases are capable of handling those interactions and requirements on a proper level as a programming language of an application does.
In my opinion using a database in this way is like using a rock to hammer a nail. You can do it with a rock but aren't you suppose to use a hammer which is more precise and specifically designed for this sort of activity ?
Fetching results in a conventional tabular layout is complex and
expensive, because to get attributes
from multiple rows you need to do JOIN
for each attribute.
This problem can be solved by making few queries on partial data and processing them into tabular layout with your application. Even if you have 600GB of product data you can process it in batches if you require data from every single row in this table.
Going further If you would like to improve the performance of the queries you can select certain operations like for e.g. reporting or global text search and prepare for them index tables which would store required data and would be regenerated periodically, lets say every 30 minutes.
You don't even need to be concerned with the cost of extra data storage because it gets cheaper and cheaper every day.
If you would still be concerned with performance of operations done by the application, you can always use Erlang, C++, Go Language to pre-process the data and later on just process the optimised data further in your main app.
If I use Class Table Inheritance meaning:
one table for Products, storing attributes common to all product types. Then one table per product type, storing attributes specific to that product type.
-Bill Karwin
Which I like the best of Bill Karwin's Suggestions.. I can kind of foresee one drawback, which I will try to explain how to keep from becoming a problem.
What contingency plan should I have in place when an attribute that is only common to 1 type, then becomes common to 2, then 3, etc?
For example: (this is just an example, not my real issue)
If we sell furniture, we might sell chairs, lamps, sofas, TVs, etc. The TV type might be the only type we carry that has a power consumption. So I would put the power_consumption attribute on the tv_type_table. But then we start to carry Home theater systems which also have a power_consumption property. OK its just one other product so I'll add this field to the stereo_type_table as well since that is probably easiest at this point. But over time as we start to carry more and more electronics, we realize that power_consumption is broad enough that it should be in the main_product_table. What should I do now?
Add the field to the main_product_table. Write a script to loop through the electronics and put the correct value from each type_table to the main_product_table. Then drop that column from each type_table.
Now If I was always using the same GetProductData class to interact with the database to pull the product info; then if any changes in code now need refactoring, they should be to that Class only.
You can have a Product table and a separate ProductAdditionInfo table with 3 columns: product ID, additional info name, additional info value. If color is used by many but not all kinds of Products you could have it be a nullable column in the Product table, or just put it in ProductAdditionalInfo.
This approach is not a traditional technique for a relational database, but I have seen it used a lot in practice. It can be flexible and have good performance.
Steve Yegge calls this the Properties pattern and wrote a long post about using it.
I do not have much experience in table design. My goal is to create one or more product tables that meet the requirements below:
Support many kinds of products (TV, Phone, PC, ...). Each kind of product has a different set of parameters, like:
Phone will have Color, Size, Weight, OS...
PC will have CPU, HDD, RAM...
The set of parameters must be dynamic. You can add or edit any parameter you like.
How can I meet these requirements without a separate table for each kind of product?
You have at least these five options for modeling the type hierarchy you describe:
Single Table Inheritance: one table for all Product types, with enough columns to store all attributes of all types. This means a lot of columns, most of which are NULL on any given row.
Class Table Inheritance: one table for Products, storing attributes common to all product types. Then one table per product type, storing attributes specific to that product type.
Concrete Table Inheritance: no table for common Products attributes. Instead, one table per product type, storing both common product attributes, and product-specific attributes.
Serialized LOB: One table for Products, storing attributes common to all product types. One extra column stores a BLOB of semi-structured data, in XML, YAML, JSON, or some other format. This BLOB allows you to store the attributes specific to each product type. You can use fancy Design Patterns to describe this, such as Facade and Memento. But regardless you have a blob of attributes that can't be easily queried within SQL; you have to fetch the whole blob back to the application and sort it out there.
Entity-Attribute-Value: One table for Products, and one table that pivots attributes to rows, instead of columns. EAV is not a valid design with respect to the relational paradigm, but many people use it anyway. This is the "Properties Pattern" mentioned by another answer. See other questions with the eav tag on StackOverflow for some of the pitfalls.
I have written more about this in a presentation, Extensible Data Modeling.
Additional thoughts about EAV: Although many people seem to favor EAV, I don't. It seems like the most flexible solution, and therefore the best. However, keep in mind the adage TANSTAAFL. Here are some of the disadvantages of EAV:
No way to make a column mandatory (equivalent of NOT NULL).
No way to use SQL data types to validate entries.
No way to ensure that attribute names are spelled consistently.
No way to put a foreign key on the values of any given attribute, e.g. for a lookup table.
Fetching results in a conventional tabular layout is complex and expensive, because to get attributes from multiple rows you need to do JOIN for each attribute.
The degree of flexibility EAV gives you requires sacrifices in other areas, probably making your code as complex (or worse) than it would have been to solve the original problem in a more conventional way.
And in most cases, it's unnecessary to have that degree of flexibility. In the OP's question about product types, it's much simpler to create a table per product type for product-specific attributes, so you have some consistent structure enforced at least for entries of the same product type.
I'd use EAV only if every row must be permitted to potentially have a distinct set of attributes. When you have a finite set of product types, EAV is overkill. Class Table Inheritance would be my first choice.
Update 2019: The more I see people using JSON as a solution for the "many custom attributes" problem, the less I like that solution. It makes queries too complex, even when using special JSON functions to support them. It takes a lot more storage space to store JSON documents, versus storing in normal rows and columns.
Basically, none of these solutions are easy or efficient in a relational database. The whole idea of having "variable attributes" is fundamentally at odds with relational theory.
What it comes down to is that you have to choose one of the solutions based on which is the least bad for your app. Therefore you need to know how you're going to query the data before you choose a database design. There's no way to choose one solution that is "best" because any of the solutions might be best for a given application.
#StoneHeart
I would go here with EAV and MVC all the way.
#Bill Karvin
Here are some of the disadvantages of
EAV:
No way to make a column mandatory (equivalent of NOT NULL).
No way to use SQL data types to validate entries.
No way to ensure that attribute names are spelled consistently.
No way to put a foreign key on the values of any given attribute, e.g.
for a lookup table.
All those things that you have mentioned here:
data validation
attribute names spelling validation
mandatory columns/fields
handling the destruction of dependent attributes
in my opinion don't belong in a database at all because none of databases are capable of handling those interactions and requirements on a proper level as a programming language of an application does.
In my opinion using a database in this way is like using a rock to hammer a nail. You can do it with a rock but aren't you suppose to use a hammer which is more precise and specifically designed for this sort of activity ?
Fetching results in a conventional tabular layout is complex and
expensive, because to get attributes
from multiple rows you need to do JOIN
for each attribute.
This problem can be solved by making few queries on partial data and processing them into tabular layout with your application. Even if you have 600GB of product data you can process it in batches if you require data from every single row in this table.
Going further If you would like to improve the performance of the queries you can select certain operations like for e.g. reporting or global text search and prepare for them index tables which would store required data and would be regenerated periodically, lets say every 30 minutes.
You don't even need to be concerned with the cost of extra data storage because it gets cheaper and cheaper every day.
If you would still be concerned with performance of operations done by the application, you can always use Erlang, C++, Go Language to pre-process the data and later on just process the optimised data further in your main app.
If I use Class Table Inheritance meaning:
one table for Products, storing attributes common to all product types. Then one table per product type, storing attributes specific to that product type.
-Bill Karwin
Which I like the best of Bill Karwin's Suggestions.. I can kind of foresee one drawback, which I will try to explain how to keep from becoming a problem.
What contingency plan should I have in place when an attribute that is only common to 1 type, then becomes common to 2, then 3, etc?
For example: (this is just an example, not my real issue)
If we sell furniture, we might sell chairs, lamps, sofas, TVs, etc. The TV type might be the only type we carry that has a power consumption. So I would put the power_consumption attribute on the tv_type_table. But then we start to carry Home theater systems which also have a power_consumption property. OK its just one other product so I'll add this field to the stereo_type_table as well since that is probably easiest at this point. But over time as we start to carry more and more electronics, we realize that power_consumption is broad enough that it should be in the main_product_table. What should I do now?
Add the field to the main_product_table. Write a script to loop through the electronics and put the correct value from each type_table to the main_product_table. Then drop that column from each type_table.
Now If I was always using the same GetProductData class to interact with the database to pull the product info; then if any changes in code now need refactoring, they should be to that Class only.
You can have a Product table and a separate ProductAdditionInfo table with 3 columns: product ID, additional info name, additional info value. If color is used by many but not all kinds of Products you could have it be a nullable column in the Product table, or just put it in ProductAdditionalInfo.
This approach is not a traditional technique for a relational database, but I have seen it used a lot in practice. It can be flexible and have good performance.
Steve Yegge calls this the Properties pattern and wrote a long post about using it.
I do not have much experience in table design. My goal is to create one or more product tables that meet the requirements below:
Support many kinds of products (TV, Phone, PC, ...). Each kind of product has a different set of parameters, like:
Phone will have Color, Size, Weight, OS...
PC will have CPU, HDD, RAM...
The set of parameters must be dynamic. You can add or edit any parameter you like.
How can I meet these requirements without a separate table for each kind of product?
You have at least these five options for modeling the type hierarchy you describe:
Single Table Inheritance: one table for all Product types, with enough columns to store all attributes of all types. This means a lot of columns, most of which are NULL on any given row.
Class Table Inheritance: one table for Products, storing attributes common to all product types. Then one table per product type, storing attributes specific to that product type.
Concrete Table Inheritance: no table for common Products attributes. Instead, one table per product type, storing both common product attributes, and product-specific attributes.
Serialized LOB: One table for Products, storing attributes common to all product types. One extra column stores a BLOB of semi-structured data, in XML, YAML, JSON, or some other format. This BLOB allows you to store the attributes specific to each product type. You can use fancy Design Patterns to describe this, such as Facade and Memento. But regardless you have a blob of attributes that can't be easily queried within SQL; you have to fetch the whole blob back to the application and sort it out there.
Entity-Attribute-Value: One table for Products, and one table that pivots attributes to rows, instead of columns. EAV is not a valid design with respect to the relational paradigm, but many people use it anyway. This is the "Properties Pattern" mentioned by another answer. See other questions with the eav tag on StackOverflow for some of the pitfalls.
I have written more about this in a presentation, Extensible Data Modeling.
Additional thoughts about EAV: Although many people seem to favor EAV, I don't. It seems like the most flexible solution, and therefore the best. However, keep in mind the adage TANSTAAFL. Here are some of the disadvantages of EAV:
No way to make a column mandatory (equivalent of NOT NULL).
No way to use SQL data types to validate entries.
No way to ensure that attribute names are spelled consistently.
No way to put a foreign key on the values of any given attribute, e.g. for a lookup table.
Fetching results in a conventional tabular layout is complex and expensive, because to get attributes from multiple rows you need to do JOIN for each attribute.
The degree of flexibility EAV gives you requires sacrifices in other areas, probably making your code as complex (or worse) than it would have been to solve the original problem in a more conventional way.
And in most cases, it's unnecessary to have that degree of flexibility. In the OP's question about product types, it's much simpler to create a table per product type for product-specific attributes, so you have some consistent structure enforced at least for entries of the same product type.
I'd use EAV only if every row must be permitted to potentially have a distinct set of attributes. When you have a finite set of product types, EAV is overkill. Class Table Inheritance would be my first choice.
Update 2019: The more I see people using JSON as a solution for the "many custom attributes" problem, the less I like that solution. It makes queries too complex, even when using special JSON functions to support them. It takes a lot more storage space to store JSON documents, versus storing in normal rows and columns.
Basically, none of these solutions are easy or efficient in a relational database. The whole idea of having "variable attributes" is fundamentally at odds with relational theory.
What it comes down to is that you have to choose one of the solutions based on which is the least bad for your app. Therefore you need to know how you're going to query the data before you choose a database design. There's no way to choose one solution that is "best" because any of the solutions might be best for a given application.
#StoneHeart
I would go here with EAV and MVC all the way.
#Bill Karvin
Here are some of the disadvantages of
EAV:
No way to make a column mandatory (equivalent of NOT NULL).
No way to use SQL data types to validate entries.
No way to ensure that attribute names are spelled consistently.
No way to put a foreign key on the values of any given attribute, e.g.
for a lookup table.
All those things that you have mentioned here:
data validation
attribute names spelling validation
mandatory columns/fields
handling the destruction of dependent attributes
in my opinion don't belong in a database at all because none of databases are capable of handling those interactions and requirements on a proper level as a programming language of an application does.
In my opinion using a database in this way is like using a rock to hammer a nail. You can do it with a rock but aren't you suppose to use a hammer which is more precise and specifically designed for this sort of activity ?
Fetching results in a conventional tabular layout is complex and
expensive, because to get attributes
from multiple rows you need to do JOIN
for each attribute.
This problem can be solved by making few queries on partial data and processing them into tabular layout with your application. Even if you have 600GB of product data you can process it in batches if you require data from every single row in this table.
Going further If you would like to improve the performance of the queries you can select certain operations like for e.g. reporting or global text search and prepare for them index tables which would store required data and would be regenerated periodically, lets say every 30 minutes.
You don't even need to be concerned with the cost of extra data storage because it gets cheaper and cheaper every day.
If you would still be concerned with performance of operations done by the application, you can always use Erlang, C++, Go Language to pre-process the data and later on just process the optimised data further in your main app.
If I use Class Table Inheritance meaning:
one table for Products, storing attributes common to all product types. Then one table per product type, storing attributes specific to that product type.
-Bill Karwin
Which I like the best of Bill Karwin's Suggestions.. I can kind of foresee one drawback, which I will try to explain how to keep from becoming a problem.
What contingency plan should I have in place when an attribute that is only common to 1 type, then becomes common to 2, then 3, etc?
For example: (this is just an example, not my real issue)
If we sell furniture, we might sell chairs, lamps, sofas, TVs, etc. The TV type might be the only type we carry that has a power consumption. So I would put the power_consumption attribute on the tv_type_table. But then we start to carry Home theater systems which also have a power_consumption property. OK its just one other product so I'll add this field to the stereo_type_table as well since that is probably easiest at this point. But over time as we start to carry more and more electronics, we realize that power_consumption is broad enough that it should be in the main_product_table. What should I do now?
Add the field to the main_product_table. Write a script to loop through the electronics and put the correct value from each type_table to the main_product_table. Then drop that column from each type_table.
Now If I was always using the same GetProductData class to interact with the database to pull the product info; then if any changes in code now need refactoring, they should be to that Class only.
You can have a Product table and a separate ProductAdditionInfo table with 3 columns: product ID, additional info name, additional info value. If color is used by many but not all kinds of Products you could have it be a nullable column in the Product table, or just put it in ProductAdditionalInfo.
This approach is not a traditional technique for a relational database, but I have seen it used a lot in practice. It can be flexible and have good performance.
Steve Yegge calls this the Properties pattern and wrote a long post about using it.
I do not have much experience in table design. My goal is to create one or more product tables that meet the requirements below:
Support many kinds of products (TV, Phone, PC, ...). Each kind of product has a different set of parameters, like:
Phone will have Color, Size, Weight, OS...
PC will have CPU, HDD, RAM...
The set of parameters must be dynamic. You can add or edit any parameter you like.
How can I meet these requirements without a separate table for each kind of product?
You have at least these five options for modeling the type hierarchy you describe:
Single Table Inheritance: one table for all Product types, with enough columns to store all attributes of all types. This means a lot of columns, most of which are NULL on any given row.
Class Table Inheritance: one table for Products, storing attributes common to all product types. Then one table per product type, storing attributes specific to that product type.
Concrete Table Inheritance: no table for common Products attributes. Instead, one table per product type, storing both common product attributes, and product-specific attributes.
Serialized LOB: One table for Products, storing attributes common to all product types. One extra column stores a BLOB of semi-structured data, in XML, YAML, JSON, or some other format. This BLOB allows you to store the attributes specific to each product type. You can use fancy Design Patterns to describe this, such as Facade and Memento. But regardless you have a blob of attributes that can't be easily queried within SQL; you have to fetch the whole blob back to the application and sort it out there.
Entity-Attribute-Value: One table for Products, and one table that pivots attributes to rows, instead of columns. EAV is not a valid design with respect to the relational paradigm, but many people use it anyway. This is the "Properties Pattern" mentioned by another answer. See other questions with the eav tag on StackOverflow for some of the pitfalls.
I have written more about this in a presentation, Extensible Data Modeling.
Additional thoughts about EAV: Although many people seem to favor EAV, I don't. It seems like the most flexible solution, and therefore the best. However, keep in mind the adage TANSTAAFL. Here are some of the disadvantages of EAV:
No way to make a column mandatory (equivalent of NOT NULL).
No way to use SQL data types to validate entries.
No way to ensure that attribute names are spelled consistently.
No way to put a foreign key on the values of any given attribute, e.g. for a lookup table.
Fetching results in a conventional tabular layout is complex and expensive, because to get attributes from multiple rows you need to do JOIN for each attribute.
The degree of flexibility EAV gives you requires sacrifices in other areas, probably making your code as complex (or worse) than it would have been to solve the original problem in a more conventional way.
And in most cases, it's unnecessary to have that degree of flexibility. In the OP's question about product types, it's much simpler to create a table per product type for product-specific attributes, so you have some consistent structure enforced at least for entries of the same product type.
I'd use EAV only if every row must be permitted to potentially have a distinct set of attributes. When you have a finite set of product types, EAV is overkill. Class Table Inheritance would be my first choice.
Update 2019: The more I see people using JSON as a solution for the "many custom attributes" problem, the less I like that solution. It makes queries too complex, even when using special JSON functions to support them. It takes a lot more storage space to store JSON documents, versus storing in normal rows and columns.
Basically, none of these solutions are easy or efficient in a relational database. The whole idea of having "variable attributes" is fundamentally at odds with relational theory.
What it comes down to is that you have to choose one of the solutions based on which is the least bad for your app. Therefore you need to know how you're going to query the data before you choose a database design. There's no way to choose one solution that is "best" because any of the solutions might be best for a given application.
#StoneHeart
I would go here with EAV and MVC all the way.
#Bill Karvin
Here are some of the disadvantages of
EAV:
No way to make a column mandatory (equivalent of NOT NULL).
No way to use SQL data types to validate entries.
No way to ensure that attribute names are spelled consistently.
No way to put a foreign key on the values of any given attribute, e.g.
for a lookup table.
All those things that you have mentioned here:
data validation
attribute names spelling validation
mandatory columns/fields
handling the destruction of dependent attributes
in my opinion don't belong in a database at all because none of databases are capable of handling those interactions and requirements on a proper level as a programming language of an application does.
In my opinion using a database in this way is like using a rock to hammer a nail. You can do it with a rock but aren't you suppose to use a hammer which is more precise and specifically designed for this sort of activity ?
Fetching results in a conventional tabular layout is complex and
expensive, because to get attributes
from multiple rows you need to do JOIN
for each attribute.
This problem can be solved by making few queries on partial data and processing them into tabular layout with your application. Even if you have 600GB of product data you can process it in batches if you require data from every single row in this table.
Going further If you would like to improve the performance of the queries you can select certain operations like for e.g. reporting or global text search and prepare for them index tables which would store required data and would be regenerated periodically, lets say every 30 minutes.
You don't even need to be concerned with the cost of extra data storage because it gets cheaper and cheaper every day.
If you would still be concerned with performance of operations done by the application, you can always use Erlang, C++, Go Language to pre-process the data and later on just process the optimised data further in your main app.
If I use Class Table Inheritance meaning:
one table for Products, storing attributes common to all product types. Then one table per product type, storing attributes specific to that product type.
-Bill Karwin
Which I like the best of Bill Karwin's Suggestions.. I can kind of foresee one drawback, which I will try to explain how to keep from becoming a problem.
What contingency plan should I have in place when an attribute that is only common to 1 type, then becomes common to 2, then 3, etc?
For example: (this is just an example, not my real issue)
If we sell furniture, we might sell chairs, lamps, sofas, TVs, etc. The TV type might be the only type we carry that has a power consumption. So I would put the power_consumption attribute on the tv_type_table. But then we start to carry Home theater systems which also have a power_consumption property. OK its just one other product so I'll add this field to the stereo_type_table as well since that is probably easiest at this point. But over time as we start to carry more and more electronics, we realize that power_consumption is broad enough that it should be in the main_product_table. What should I do now?
Add the field to the main_product_table. Write a script to loop through the electronics and put the correct value from each type_table to the main_product_table. Then drop that column from each type_table.
Now If I was always using the same GetProductData class to interact with the database to pull the product info; then if any changes in code now need refactoring, they should be to that Class only.
You can have a Product table and a separate ProductAdditionInfo table with 3 columns: product ID, additional info name, additional info value. If color is used by many but not all kinds of Products you could have it be a nullable column in the Product table, or just put it in ProductAdditionalInfo.
This approach is not a traditional technique for a relational database, but I have seen it used a lot in practice. It can be flexible and have good performance.
Steve Yegge calls this the Properties pattern and wrote a long post about using it.