I have found the sample configuration files provided with mysql 5.0, but I am not able to save them, when I edit them. I also tried saving using a different file name but I received an error by windows saying that I don't have permission to save file in that location (I am an administrator).
I need to edit the configuration file so I am able to save more data. I really can't figure out how to do it and have been struck on this problem since hours. anyone who can figure out whats going on?
to edit my.cnf file in linux opensuse 11.3
first of all open terminal window in su mode
then go to the directory /etc
then open my.cnf file in any of the text editor(kwrite);
now just insert the following two parameters after the line [mysqld]
wait_timeout=50
interactive_timeout=50
save and exit;
restart mysql;
now u can set your session time out by using the following:
set wait_timeout=5000;<br>
it is persistent
You need to have root permissions on my.cnf file to edit it.
So login using root user and then you will be able to edit my.cnf and then you need to restart MySQL server in order to reflect changes.
I see that the basic information was included in directing someone to edit the my.cnf; however, there is no step by step available for beginners. I have a great article with step by step instructions and graphics that explains how to get the MySQL settings and how to change the my.cnf as root through shell. Hope the article helps.
How to edit the MySQL my.cnf file
Regards,
James R
Related
I wanted to disable some options in the MySql server strict mode, but for some reason I'm not even able to find its configuration file (my.cnf)
Currently installed MySql:
Ver 14.14 Distrib 5.7.20, for macos10.12 (x86_64)
Output generated by
mysql --help
Default options are read from the following files in the given order:
/etc/my.cnf
/etc/mysql/my.cnf
/usr/local/mysql/etc/my.cnf
~/.my.cnf
But there is no such file as my.conf
I had done some research work on SO but none of the advises has worked for me.
What I'm supposed to do?
There are defaults built into MySQL. The configuration file(s), if any, override the defaults.
Note that the config files are not looked at except during startup. So, editing or creating such a file has no effect until you restart mysqld.
If you mess up the syntax, mysqld will not start. Then you need to find the error, either during startup, or in a log file. (Or you could ask here "what is my syntax error".)
As for the location, and name, of the config files that will be used:
$ mysql --help
gives you the list for mysql, but perhaps you need it for the server, so try
$ mysqld --help --verbose
gives you long output; maybe 50 lines from the top, you should see something like:
Usage: mysqld [OPTIONS]
Default options are read from the following files in the given order:
/etc/my.cnf /etc/mysql/my.cnf /usr/etc/my.cnf ~/.my.cnf
You asked about my.conf; was that a typo?
Regardless, If those files are missing, you can create them, make them readable by mysql, and put things into it preceded by [mysqld] so that the server will see them.
Personal override
Regardless of what is in the defaults and/or config files, you can add to the last file given. In the examples above that is 'hidden' .my.cnf in your home directory. All you need to do is create a few lines:
[mysql]
some_setting = somevalue
[client]
some_setting = somevalue
That helps for the "mysql" commandline tool and/or other clients (maybe).
But if you need to make changes to the server mysqld, it needs to be in one of the other files. Again, the minimum is something like
[mysqld]
some_setting = somevalue
Note the mysqld to refer to the server. And remember to restart the service.
Another note: If you see (in an existing config file), !includedir ..., then go to that directory to find any number of further files. You could add your own file, say z.cnf (so it would be picked last) with the two (or more) lines as indicated above.
If you have installed Mysql 8 or Above using the package installer from mysql website, then follow what i did
Create the config file in your home directory vim ~/.my.cnf
Do open System preferences in mac
Then Select the configuration file you created on the option.
The content in this website says.
I had the urgent need to configure some specific stuff in MySQL 5.7 on my developer machine, a MacBook Pro running Mac OS Sierra. Unfortunately, I did not find a my.cnf file that could be customized anywhere?
Internet research showed that MySQL Database Server on Mac OS runs without a my.cnf config file by default, simply started with default values.
Luckily, it is pretty simple to customize the MySQL Server installation by creating and editing a custom my.cnf file like this:
sudo cp /usr/local/mysql/support-files/my-default.cnf /etc/my.cnf
Then edit / customize the /etc/my.cnf file as required and restart your MySQL Server.
Or you can refer to this answer
You could try:
$ locate mysql | grep my.cnf
It should reveal the location(s) if it exists.
Location of MySQL configuration file (ie: my.cnf) not specified
How can I fixed this thing?
I been trying to reinstall mysqlserver 5.5 / 5.7 and workbench countless of time. But I still not able to fix this issue.
I solved this problem. Step one: click here
Step two: and then click here to choose your path
Step three: my path is C:\ProgramData\MySQL\MySQL Server 5.7\my.ini
If you already know where your configuration file is located, but just don't know how to specify it in mySQLWorkbench, you can skip steps 1-3 and just follow step 4 in these instructions.
Step 1: Make sure which mysql is running (just in case you have multiple installations on your system) and how:
$ ps aux | grep mysql
may result in something like:
_mysql 120 0,0 3,4 5122736 565108 ?? Ss Fr01pm 61:05.93 /usr/local/mysql/bin/mysqld --user=_mysql --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --log-error=/usr/local/mysql/data/mysqld.local.err --pid-file=/usr/local/mysql/data/mysqld.local.pid
If, in this output, you see that mysqld has been started with the --defaults-file option, that option specifies the configuration file used by msql. If so, you have found the configuration file and can skip to step 4.
If not, check if this returns the same binary location as above command:
$ which mysqld
If not, then make sure you use the full path for mysqld from the first output in the following step.
Step 2: Ask mySQL which configuration files it is using:
$ mysqld --verbose --help | grep -A 1 "Default options"
should output something like:
Default options are read from the following files in the given order:
/etc/my.cnf /etc/mysql/my.cnf /usr/local/mysql/etc/my.cnf ~/.my.cnf
Step 3: Check the given locations in that order. The first finding should be your mySQL configuration file.
Step 4: In mySQLWorkbench go to Database > Manage Connections, then select the connection, select tab System Profile, and enter the path and file name in Configuration File.
This should be it.
And if still nothing happens, you may have used the installer Package. If you have, then you must select the Installation Type from the drop-down to reflect that before you locate the configuration file.
Here's a screenshot that follows from the above screenshots
Also, there may not be a config file and you can create one here, then get out of the Options File, go back in and you will see all the options.
I changed my setting from Custom to MacOSx (MySQL Package) under: Database → Manage Connections → MySQL Connections → Select DB Connection → System Profile → Installation Type → (default setting) MySQL Package.
Change from custom to default setting:
Reconnect by testing connection:
For maria-db users
back up the original /etc/mysql/my.cnf
copy and rename /etc/mysql/mariadb.conf.d/50-server.cnf to /etc/mysql/my.cnf.
This would fix the problem.
Remember to revert changes after finish.
For those with Mac OS Catalina:
I did not have a my.cnf file. I went to /usr/local/mysql/
and created a directory named etc, which I did not have either.
Then, inside that directory, I created the file (my.cnf).
This is the link that helped me How to fix --secure-file-priv option error
for mysql 5.7 users and MAMP: just create /etc/my.cnf
macOS 13 and MySQL 8 current:
Open MySQL Workbench on your Mac. Connect into your localhost instance of MySQL.
Click the little wrench icon next to INSTANCE on the left pane above Startup / Shutdown.
Select macOS as System Type, macOS as Installation Type, and the rest will default into place. Copy the location it gives you for the my.cnf file.
Click Close
Now click Options File on the left. It will notice that you don't have a file and will show you default values.
Click the Apply... in the bottom right corner.
It will then ask you for a password of your current logged in user of your Mac to create and save the my.cnf file.
Now in the Finder use the keyboard combo of Command-Shift-G and copy in your location we copied early (i.e. /etc/my.cnf)
I'm trying to locate data folder of mysql server 5.7
When I run this query
SHOW GLOBAL VARIABLES LIKE 'datadir';
I got my data dir path, but when I actually go there in c drive its not there.
Checked all hidden properties, all are fine.
Any help ?
It could be hidden. Default datadir on Windows 10 is C:\ProgramData which is normally hidden.
This link describes initializing the data directory on Windows or UNIX-like OSs.
For Windows
Because you have problems with finding the data directory I suggest you define it yourself.
First you have to make sure the following lines are in my.ini file:
[mysqld]
basedir=C:\\Program Files\\MySQL\\MySQL Server 5.7
datadir=D:\\MySQLdata # here you could put
The second line points to your MySQL Server installation. The third line to wherever you want your data directory to be. After saving the file. You could call following command:
C:\> bin/mysqld --defaults-file=C:\my.ini --initialize
With C:\my.ini pointing to your my.ini file. Hope this helps you
So I installed XAMPP (in Ubuntu), and it was successful,
the location of MYSQL is on, /opt/lampp/bin/mysql, and so I have to include the entire path to access mysql as seen below:
$/opt/lampp/bin/mysql -u root -p
And it can login.
But using just "mysql" isn't working; it says not found.
Can you give me an idea on how to set env't variable for mysql?
New in Ubuntu. help? :(
in your home directory there's a file called .bash_profile (use ls -la to see it because files starting with . are by default hidden
There will probably already be a line similar to this one:
PATH=$PATH:$HOME/bin
Change it to
PATH=$PATH:$HOME/bin:/opt/lampp/bin/
This is the easiest way, there are other ways to eg do this so that all users on the system will automatically get this directory in their path, for more detailed answers go to our sister site askubuntu.com
I have MySQL set up correctly on my linux computer, however I want a better way to input data into the database besides terminal. For this reason, I downloaded phpMyAdmin. However, when I try to log in to the phpMyAdmin from index.php, it doesnt do anything. It seems to just refresh the page without doing anything. I am putting in the correct MySQL username and password. What is the issue?
Here is a screen shot of what it shows after I click "go".
This is a possible issue when the path to save php_session is not correctly set :
The directory for storing session does not exists or php do not have sufficient rights to write to it.
To define the php_session directory simply add the following line to the php.ini :
session.save_path="/tmp/php_session/"
And give write rights to the http server.
usually, the http server run as user daemon in group daemon. If it is the case, the following commands will make it :
chown -R :daemon /tmp/php_session
chmod -R g+wr /tmp/php_session
service httpd restart
Login fails if session folder in not writeable. To check that, create a PHP file in your web directory with:
<?php
$sessionPath = 'undefined';
if (!($sessionPath = ini_get('session.save_path'))) {
$sessionPath = isset($_ENV['TMP']) ? $_ENV['TMP'] : sys_get_temp_dir();
}
if (!is_writeable($sessionPath)) {
echo 'Session directory "'. $sessionPath . '"" is not writeable';
} else {
echo 'Session directory: "' . $sessionPath . '" is writeable';
}
If session folder is not writeable do either
sudo setfacl -R -m u:www-data:rwx <session directory> or chmod 777 sudo setfacl -R -m u:www-data:rwx <session directory>
-
I am late to the game, but on Amazon linux AMI I could not log in to phpmyadmin ... it just kept refreshing the login screen with no errors.
I have fixed with below command
sudo chmod -R 755 /var/lib/php/session
I fixed my issue on CentOS 7 with MariaDB and phpmyadmin I downloaded from offical phpmyadmin site by adding
session.save_path = "/var/lib/php/session"
to /etc/php.ini
and
chown -R :lighttpd /var/lib/php/session
I also restarted php-fpm and lighttpd after
In my case the solution was to set an Apache setting properly:
ProxyPassReverseCookiePath
This was required, because ProxyPass and ProxyPassReverse were in use, but cookie paths are not changed automatically.
It'd be great if PHPMyAdmin had shown something like session not found or anything, when password is sent with POST.
Do you have a .htaccess file in one of the parent directories that strips off index.php from the url by doing a 301 redirect?
301 redirects discard the form data and redirect you as if you didn't submit anything. So you get returned to the login page.
So you should create a local .htaccess file in the phpmyadmin directory with a single line RewriteEngine On. This will overwrite the previous rewrite rule to nothing.
You may need to clear the browser cache as Chrome aggressively caches 301 redirects.
In my case the hard drive was full.
Use df -h to check the space left on your hard drive, and if you want you can free some space by using the command sudo apt-get clean, which removes installation files.
I hope this will help some future users.
I ran these commands and it worked for me:
sudo service httpd restart
sudo service mysqld stop
sudo service mysqld start
Try searching the web for installation or setup guides for phpMyAdmin. Look at two or three of these and make sure you have covered all the required steps. (If you have already done so, please include which guides you have followed it in the question).
See if it helps to edit config.inc.php (acecoder mentioned this as well).
Check if this guide is of any help.
Which distro are you on? Try searching for the name of the distro you are using together with "phpMyAdmin guide" or "phpMyAdmin setup howto".
If you encounter errors along the way, post the error text here, if it's short (or paste via a pastebin-like site if it's long).
Are you sure that mysql is running? I had the same issue after doing a database import and filling up the volume containing the mysql database. After changing various permissions and clearing sessions, I tried to restart mysql (/etc/init.d/mysql restart) and it failed because the volume was full. After increasing /var and starting mysql successfully, I was able to log into phpmyadmin just fine.
If you have an error like:
Host 'host_name' is blocked because of many connection errors.
Login in your mysql as root and run the flush hosts command
1.- mysql -u root -p
2.- mysql > flush hosts
After this I was able to login again in phpmyadmin
phpMyAdmin will show errors when login fails. If it doesn't, it means that your setup has an error.
The most likely place to check is your php.ini settings. Since there doesn't seem to be an official list of phpMyAdmin-compatible settings, it's mostly trial and error.
Make sure you have enabled the stuff that needs to be enabled. Also check that you did not enable uncommon php.ini settings (like enable_post_data_reading = Off) because phpMyAdmin assumes them to be "the usual ones".
To ease debugging, start with a clean default php.ini file then tweak them line by line to see which setting is causing the error. (Don't forget that you need to restart your server after changing the php.ini file for the changes to take place.)
In my case it was due to an old Apache session.
Stop Apache, clear all pending sessions in your sessions.save_path directory (example: /var/lib/php/session) and restart Apache.
Make sure to set a 32 chars long random key in 'config.inc.php' in the $cfg['blowfish_secret'] value. That solved it for me.
Didn't realize I need to restart MariaDB after modifying config.inc.php:
service mariadb restart
Otherwise at least in my case changes didn't come affect. Also make sure your php session directory is writable by webserver (typically session.save_path = "/var/lib/php/session")