Has anyone had any luck using swapping irb out for pry in SublimeREPL? I'm close, I think. I don't get an error however I don't get a response when I enter a command either. It behaves like the buffer is being reset each time I hit return.
I'm using rbenv and have set my SublimeREPL PATH as follows:
"default_extend_env": {"PATH": "{HOME}/.rbenv/bin:{HOME}/.rbenv/shims:{PATH}"}
Try putting Pry.config.auto_indent = false to your .pryrc
Besides Setting PATH in default_extend_env, you have to set GEMPATH as well. Here is my SublimeREPL settingļ¼
{
"default_extend_env": {
"PATH": "{HOME}/.rbenv/shims:{PATH}",
"GEM_PATH": "{HOME}/.rbenv/shims"}
}
You can add the following code at the beginning of pry_repl.py to print out the PATH to check if your setting is in effect.
puts "PATH:#{ENV['PATH']}"
puts "GEM_PATH:#{ENV['GEM_PATH']}"
I use RVM and Ruby 2.1.2. I changed /Users/[my name]/Library/Application Support/Sublime Text 3/Packages/User/SublimeREPL.sublime-settings to:
default_extend_env":
{
"PATH": "/usr/local/bin/:{PATH}",
"GEM_PATH": "{HOME}/.rvm/gems/ruby-2.1.2/"
}
To get your GEM_PATH, type gem env and get path from "INSTALLATION DIRECTORY:" or go into pry and type ENV['GEM_PATH']
Related
Whenever I enter a certain auto-completion suggestions from coc.nvim, it just flashes the suggestion and removes it entirely and it throws an error 'coc.nvim: command not found'. The suggestion tab shows normally and acts normally.
This bug always happens in a gdscript file, all other files work as intended.
I can't find a fix for this, maybe its the language server or the coc configuration file.
Try adding this to your init.vim file.
inoremap complete_info().selected != -1 ?
\ &filetype == "gdscript3" ? (coc#expandable() ? "<C-y>" : "<C-y>a") : "<C-y>"
\ : "<C-g>u<CR>"
I am using a function that I found in YADR which should insert the output of the last command.
# Use Ctrl-x,Ctrl-l to get the output of the last command
zmodload -i zsh/parameter
insert-last-command-output() {
LBUFFER+="$(eval $history[$((HISTCMD-1))])"
}
zle -N insert-last-command-output
bindkey "^X^L" insert-last-command-output
For some reason, it does not seem to work by pressing ctrl-x ctrl-l but running
echo $(eval $history[$((HISTCMD-1))])
command on the terminal does produce the output of the last command.
Running bindkey -M viins shows "^X^L" insert-last-command-output
as one of the entries. Therefore, the function is registered.
I don't really understand how the function works. I think that the variable LBUFFER holds the output of all last commands but when I echo $LBUFFER, it returns the function code.
Can anyone help me get this working?
I finally found a solution.
I had been trying to use the shortcut inside tmux which did not work. However, outside tmux, everything worked. It turns out that tmux will not allow a shortcut with two keys. I changed the shortcut to just alt-L and everything works.
I want to use different flags (sourcemap, out, target) that the typescript compiler provides. I am trying to define a build system in sublime 2 but unable to do so.
Have already read this question.
basically i want to do something like the following
tsc src/main/ts/myModule.ts --out src/main/js/myModule.js --sourcemap --target ES5
Just add them to the cmd array
{
"cmd": ["tsc","$file", "--out", "src/main/js/myModule.js"],
"file_regex": "(.*\\.ts?)\\s\\(([0-9]+)\\,([0-9]+)\\)\\:\\s(...*?)$",
"selector": "source.ts",
"osx": {
"path": "/usr/local/bin:/opt/local/bin"
}
}
First of all let me say that I'm using Sublime Text 3 on Windows and Typescript 1.0.
I don't think that SublimeText2 is so much different, though...
If you're on similar conditions, take a look at my current configuration file:
{
"cmd": ["tsc", "$file"],
"file_regex": "(.*\\.ts?)\\s*\\(([0-9]+)\\,([0-9]+)\\)\\:\\s(.+?)$",
"selector": "source.ts",
"windows": {
"cmd": ["tsc.cmd", "$file", "--target", "ES5"]
}
}
Please notice that I tweaked the regex so that it matches the TSC error format (and brings you to the line containing the error when you double click it from the error log...)
Besides of that, I think that the real command-line which gets run is the lower one: as a matter of fact I had it working only placing the options down there... (in this specific case I'm asking an ES5 compilation type, your parameters will differ).
This suppose you have a tsc.cmd avaliable on path; if not, put the full path of tsc.cmd or tsc.exe instead of "tsc.cmd" and be sure to escape backslashes \ as \\...
This works in my situation, maybe in other contexts they should also be placed on the first line...
Hope this helps :)
I have a file Guardfile in my rails project, but appears just in plain text, so each time is opened it must be assigned the ruby syntax to display it correctly.
I cannot use Open all with current extension as... because it doesn't have an extension, but I suppose I could assign a specific syntax to a file without an extension because files like Gemfile, Capfile or Rakefile are displaying correctly.
How can I achieve this?
Menu: Preferences -> Browser Packages
Then open the file Ruby\Ruby.tmLanguage
Look up for this block:
<array>
<string>rb</string>
<string>rbx</string>
<string>rjs</string>
<string>Rakefile</string>
<string>rake</string>
<string>cgi</string>
<string>fcgi</string>
<string>gemspec</string>
<string>irbrc</string>
<string>capfile</string>
<string>Gemfile</string>
</array>
Add the new entry:
<string>Guardfile</string>
Install facelessuser / ApplySyntax. It has a built in rule for Guardfiles. It is also good for other random files that should be set as a certain syntax. For example, here is one I set up for a random file that should have Bash syntax.
"syntaxes": [
{
"name": "ShellScript/Shell-Unix-Generic",
"rules": [
{"file_name": ".*random$"}
]
}
]
The name value is the path to the tmLanguage file from Packages. ShellScript is the name of the Packages folder that the tmLanguage file is in. Shell-Unix-Generic is the tmLanguage file name.
For Sublime 3:
Commmand + Shift + p: set syntax ruby
Preference -> Settings - Syntax Specific
Add syntax like following:
{
"extensions": [
"Gemfile",
"Gemfile.lock",
"Podfile",
"Podfile.lock",
"Manifest.lock",
"Fastfile_helper",
"Fastfile",
"Appfile"
]
}
What really bad is that the syntax does not support fuzzy match, regex thing. This means you must list all the files.
I'm compiling a deb package and when I run dpkg-buildpackage I get:
dpkg-shlibdeps: error: no dependency information found for /usr/local/lib/libopencv_highgui.so.2.3
...
make: *** [binary-arch] Error 2
This happens because I installed the dependency manually. I know that the problem will be fixed if I install the dependency (or use checkinstall), and I want to generate the package anyway because I'm not interested on dependency checking. I know that I can give to dpkg-shlibdeps the option --ignore-missing-info which prevents a fail if dependency information can't be found. But I don't know how to pass this option to dpkg-shlibdeps since I'm using dpkg-buildpackage and dpkg-buildpackage calls dpkg-shlibdeps...
I have already tried:
sudo dpkg-buildpackage -rfakeroot -d -B
And with:
export DEB_DH_MAKESHLIBS_ARG=--ignore-missing-info
as root.
Any ideas?
use:
override_dh_shlibdeps:
dh_shlibdeps --dpkg-shlibdeps-params=--ignore-missing-info
if your rule file hasn't the dh_shlibdeps call in it. That's usually the case if you've
%:
dh $#
as only rule in it ... in above you must use a tab and not spaces in front of the dh_shlibdeps
If you want it to just ignore that flag, change the debian/rules line from:
dh_shlibdeps
to:
dh_shlibdeps --dpkg-shlibdeps-params=--ignore-missing-info
Yet another way, without modifying build scripts, just creating one file.
You can specify local shlib overrides by creating debian/shlibs.local with the following format: library-name soname-version dependencies
For example, given the following (trimmed) ldd /path/to/binary output
libevent-2.0.so.5 => /usr/lib/libevent-2.0.so.5 (0x00007fc9e47aa000)
libgcrypt.so.20 => /usr/lib/libgcrypt.so.20 (0x00007fc9e4161000)
libpthread.so.0 => /usr/lib/libpthread.so.0 (0x00007fc9e3b1a000)
The contents of debian/shlibs.local would be:
libevent-2.0 5 libevent-2.0
libgcrypt 20 libgcrypt
libpthread 0 libpthread
The "dependencies" list (third column) doesn't need to be 100% accurate - I just use the library name itself again.
Of course this isn't needed in a sane debian system which has this stuff defined in /var/lib/dpkg/info (which can be used as inspiration for these overrides). Mine isn't a sane debian system.
Instead of merely ignoring the error, you might also want to fix the source of the error, which is usually either a missing or an incorrect package.shlibs or package.symbols file in package which contains the shared library triggering the error.
[1] documents how dpkg-shlibdeps uses the package.shlibs resp. package.symbols, files, [2] documents the format of the package.shlibs and package.symbols files.
[1] https://manpages.debian.org/jessie/dpkg-dev/dpkg-shlibdeps.1.en.html
[2] https://www.debian.org/doc/debian-policy/ch-sharedlibs.html
You've just misspelled your export. It should be like this:
export DEB_DH_SHLIBDEPS_ARGS_ALL=--dpkg-shlibdeps-params=--ignore-missing-info
dpkg-buildpackage uses make to process debian/rules. in this process, dpkg-buildpackage it might call dpkg-shlibdeps.
thus, the proper way to pass modify a part of the package building process is to edit debian/rules.
it's hard to give you any more hints, without seeing the actual debian/rules.
Finally I did it in the brute way:
I edited the script /usr/bin/dpkg-shlibdeps, changing this :
my $ignore_missing_info = 0;
to
my $ignore_missing_info = 1;
You can use this:
dh_makeshlibs -a -n
exactly after dh_install