I've created this config for redis [/etc/redis/map.conf]:
include /etc/redis/ideal.conf
port 11235
pidfile /var/run/redis-map.pid
logfile /var/log/redis/map.log
dbfilename map.rdb
As you can see, it includes /etc/redis/ideal.conf; this file actually exists and we have read permissions.
Also there is another file, slightly different; consider [/etc/redis/storage.conf]:
include /etc/redis/ideal.conf
pidfile /var/run/redis-storage.pid
port 8000
bind 192.168.0.3
logfile /var/log/redis/storage.log
dbfilename dump_storage.rdb
My problem is: I can launch redis-server with storage.conf (and everything works fine), but map.conf leads to the following error:
Reading the configuration file, at line 1
>>> 'include /etc/redis/ideal.conf'
Bad directive or wrong number of arguments
failed
Version of redis is 2.2.
Where did I go wrong?
Sorry guys.
I was using different instances of Redis.
Instance for storage.conf was launched by /usr/local/bin/redis-server, but map.conf launched by /usr/bin/redis-server; second one is broken.
Thank you anyway.
Related
Trying to set up a network printer with CUPS.
Followed online documentation that stated:
To discover or share printers using DNS-SD/mDNS, setup .local hostname
resolution with Avahi and restart cups.service.
Followed directions for setting up Avahi to the point where avahi-browse --all --ignore-local --resolve --terminate and avahi-resolve-host-name my-domain.local are both working.
But getent hosts my-domain.local fails to resolve. This results in CUPS failing to print because it can't find my-printer.local.
I read the mdns Github page and saw a note that made me think I didn't need a /etc/mdns.allow file.
nss-mdns has a simple configuration file /etc/mdns.allow for enabling
name lookups via mDNS in other domains than .local.
Note: The "minimal" version of nss-mdns does not read /etc/mdns.allow under any circumstances. It behaves as if the file
does not exist.
In the recommended configuration, no /etc/mdns.allow file is present.
But then I saw the last note in that section:
If, during a request, the system-configured unicast DNS (specified in
/etc/resolv.conf) reports an SOA record for the top-level local name,
the request is rejected. Example: host -t SOA local returns something
other than Host local not found: 3(NXDOMAIN). This is the unicast SOA
heuristic.
I tested that out on my machine and sure enough, I was getting something OTHER than Host local not found....
Adding a /etc/mdns.allow file with a line for .local. and for .local and now I can ping my-printer.local.
I'm using symfony 4, What does error stands for ?
Warning: SessionHandler::read(): open(/var/lib/php/sessions/sess_634q91mh896b6aa4jpjvlihmar, O_RDWR) failed: Permission denied (13)
When a user logs into a Symfony application, session information is stored on the web server. By default Symfony uses the native PHP session mechanism, storing session info in a file in /var/lib/php/sessions/ on Linux systems. Your error message is output by PHP and means it got a permissions error creating or re-opening a session file.
The error appears only intermittently because PHP removes old session files randomly about every 1/100th or 1/1000th page load. (On some Linux variants, old session files are removed by a cron job instead.)
https://symfony.com/doc/current/session.html says:
"some session expiration related options may not work as expected if other applications that write to the same directory have short max lifetime settings."
Try to avoid having multiple processes writing to the same sessions directory. I think I got the error message because both an Apache web server and php bin/console server:start were running at the same time. One process may have removed the other process's session file.
See PHP manual and Symfony manual for how to configure writing to separate directories. For example, I changed {Symfony directory}/config/packages/framework.yaml:
# Enables session support. Note that the session will ONLY be started if you read or write from it.
# Remove or comment this section to explicitly disable session support.
session:
# handler_id: ~
cookie_secure: auto
cookie_samesite: lax
handler_id: 'session.handler.native_file'
save_path: '%kernel.project_dir%/var/sessions/%kernel.environment%'
gc_probability: 100 # Run garbage collection always for
gc_divisor: 100 # investigating this problem only.
Another possibility is a problem in your Symfony code can cause the error message. The Symfony documentation says not to call the PHP session functions like session_start() directly since Symfony classes call them. A bug in my code caused an exception which I speculate caused the error message.
Related stack overflow questions: cleanup-php-session-files and how-does-php-know-when-to-delete-a-session
For those familiar with C code, see the PHP interpreter source code line that prints the error here
Hope this helps!
Not related to symfony 4, but you have to fix permissions in your /var/lib/php/sessions/ directory
I've been having a dupliate host problem with nagios3 and check_mk from the Jessie repos.
After installing and config nagios3, I added my web.cfg for nagios.
I wanted to additional chekcs done by check_mk, so added the hosts to main.mk.
Then check_mk -I, -II and finally -U
-U will generate the first check_mk_commands but it contains an "host" definition. If I remove it and cat check_mk_commands > web.cfg it has depenceies problems.
If I remove the host definition from my web.cfg of nagios, there is still the same problem: duplicate host entry in "web.cfg"
I checked cfg_dir and nothing is included twice.
I am doing the same thing #work and it works.
Is there a way to tell check_mk not to do the host definition, I've spent 5 days of this.
Let me know if want some pasties, but I nailed the problem: check_mk does an host definition that is already in my nagios webserver monitoring configuration.
Removing the definition from one or the other doesn't work.
Even copyiing check_mk_commands.cfg without the host into my nagios3 config won't work due to missing templates.
Anyone encountered this problem ?
Please let me know, 6th day on this..
/usr/share/check_mk/modules/config.py has a variable that's called 'generate_hostconf' which is True by default.
If you change this to False, check_mk will not generate the host_config.
EDIT: This should be done in main.mk or any conf.d/*.mk files since it's not nice to edit core files.
/etc/check_mk/conf.d/no_host_config.mk:
generate_hostconf = False
I am getting the following error when (re)starting my Yesod app on openshift:
server: InvalidYaml (Just (YamlException "Yaml file not found: xxx.xxx.xxx.xxx"))
Where xxx.xxx.xxx.xxx is an IP address. I did find a link to a Heroku+Yesod issue saying something about "removing an argument" but it didn't say from where, and of course the scripts/settings are going to be different in the case of OpenShift. Any ideas what this error is and how to get past it?
I'm assuming based on the question that you're using the standard scaffolding. If you look in the code, you'll find that uses loadAppSettingsArgs, which is described as:
Same as loadAppSettings, but get the list of runtime config files from the command line arguments.
If you don't want to pay attention to command line arguments, just replace the call to loadAppSettingsArgs with loadAppSettings [].
I have a webapp that segfaults when the database in restarted and it tries to use the old connections. Running it under gdb --args apache -X leads to the following output:
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -1212868928 (LWP 16098)]
0xb7471c20 in mysql_send_query () from /usr/lib/libmysqlclient.so.15
I've checked that the drivers and database are all up to date (DBD::mysql 4.0008, MySQL 5.0.32-Debian_7etch6-log).
Annoyingly I can't reproduce this with a trivial script:
use DBI;
use Test::More tests => 2;
my $dbh = DBI->connect( "dbi:mysql:test", 'root' );
sub test_db {
my ($number) = $dbh->selectrow_array("select 1 ");
return $number;
}
is test_db, 1, "connected to db";
warn "restart db now";
getc;
is test_db, 1, "connected to db";
Which gives the following:
ok 1 - connected to db
restart db now at dbd-mysql-test.pl line 23.
DBD::mysql::db selectrow_array failed: MySQL server has gone away at dbd-mysql-test.pl line 17.
not ok 2 - connected to db
# Failed test 'connected to db'
# at dbd-mysql-test.pl line 26.
# got: undef
# expected: '1'
This behaves correctly, telling me why the request failed.
What stumps me is that it is segfaulting, which it shouldn't do. As it only appears to happen when the whole app is running (which uses DBIx::Class) it is hard to reduce it to a test case.
Where should I start to look to debug this? Has anyone else seen this?
UPDATE: further prodding showed that it being under mod_perl was a red herring. Having reduced it to a simple test script I've now posted to the DBI mailing list. Thanks for your answers.
What this probably means is that there's a difference between your mod_perl environment and the one you were testing via your script. Some things to check:
Was your mod_perl compiled with the same version of Perl
Are the #INC's the same for both
Are you using threads in your mod_perl setup? I don't believe DBD::mysql is completely thread-safe.
I've seen this problem, but I'm not sure it had the same cause as yours. Are you by chance using a certain module for sending mails (forgot the name, sorry) from your application? When we had the problem in a project, after days of debugging we found that this mail module was doing strange things with open file descriptors, then forked off another process which called the console tool sendmail, which again did strange things with file descriptors. I guess one of the file descriptors it messed around with was the connection to the database, but I'm still not sure about that. The problem disappeared when we switched to another module for sending mails. Maybe it's worth a look for you too.
If you're getting a segfault, do you have a core file greated? If not, check ulimit -c. If that returns 0, your system won't create core files and you'll have to change that. If you do have a core file, you can use gdb or similar tools to debug it. It's not particularly fun, but it's possible. The start of the command will look something like:
gbd /usr/bin/httpd core
There are plenty of tutorials for debugging core files scattered about the Web.
Update: Just found a reference for ensuring you get core dumps from mod_perl. That should help.
This is a known problem in old DBD::mysql. Upgrade it (4.008 is not up to date).
There's a simple test script attached to https://rt.cpan.org/Public/Bug/Display.html?id=37027
that will trigger this bug.