How can I insert a horizontal line above each subtotal in SSRS-2008?
The issue seems to be that you can't have borders inside of a grouping column. So, my line won't extend all the way to the left. In the report I'm trying to make in SSRS, the line cuts-off to the left of the Item column, doesn't show in the department column, because it's not yet the "end" of that group until after the subtotal.
Right click on the Item Column and insert a column to the Left of the Item column. The new column will have a cell for every row, and can include the borders before or after the total rows. Move the Department field into this column, and then delete the column with the vertical grouping. Don't delete the group itself, just the column.
If you don't have a summary row for the group, this can be added by right clicking in one of the detail row cells, such as the one that contains your Item Name and select Insert Row -> Outside Group - Above.
The Department field should be placed in the cell in the summary row. (The icon for this summary row in the left margin of the tablix will not have the three horizontal lines. Those indicate a row will be repeated as part of the detail set.)
Related
I have never used SSRS before.I need to create a new report.Query details from Employee table and display
in the below format for given emplID
Emplid 111
EmplName test
DateofBirth 1/1/1990
DateofHire 1/1/2015
DeptID 1
DeptName Sales
ManagerSignature --------------
Signed Date ------------
Also need to add custom fields that are not in the table like ManagerSignature and SignedDate.
I'm not sure how to get the above format.Any help is greatly appreciated.Thanks!
The simplest way to create a report with the two-column format you need is to add a table to the report.
Delete the last column so you only have two.
Right-click on the detail row (with the three lines like a hamburger menu icon) and Insert Row --> Inside Group.
Repeat Inserting Rows 6 more times to create all the detail lines you need.
The Left Column will be used as your Header and the 2nd column for your data. Add your Text headers to the first column and then chose the corresponding data field in the second.
In your query, add your signature and date line as null values so you can select it in your table just like the other values. Then add black bottom borders to those two text boxes to represent the signature/date lines.
select
Emplid
, EmplName
, DateofBirth
, DateofHire
, DeptID
, DeptName
, null as 'ManagerSignature'
, null as 'SignedDate'
from YourTable
Considering you have data something like below
Click on View and Report Data, There you can see your dataset and it'S column as well
Then go to Design area and then in body section Insert--> Table
You will have something like below
Then you will get option to enter data
Same way keep adding all others as well
Now on first row taye label per hand as below
At last you will have something like below
Remove unwanted column cell and row cell.
You will have something like below
Here's the tip,
Now if you want each record on each page
Click on Row deatils and then go to genral and add EmpId
and then add pagebreak as below
final result on each page each record result
i have an RDL contains 1 row group and 1 column group
I want to create one more group which wrap both this 2 group
So that group X will be created, and records of row group A & column group A will generate base on group X.
but i found no solution to add that group X.
Is there any solution to do it? or it is impossible in RDL?
Above is the expected result with some important points
A is row group,
C is column group, the string C, C1 ,C2,C3 are actually the data from the same dataset with A, just the grouping parameter is not the same
DATASET
Below are the interesting requirement:
for each group of A (lets say A1&A2), it will display in a new page (ie. new tabs in the SSRS)
there is total row for each row group member
As mentioned C - C3 are generated dynamically based on the dataset. There are total for each group of A and requires to aggregate the sum for both rows,
thus C somehow need to cater the filtered dataset of A, and display the sum
The problem is:
In the page of A1, C1 & C2 will be blanked. C & C3 contains value
In page A2, C & C3 will be blanked and C1&C2 can be displayed
In fact, for the blank column ( for example A1), even the string C1 & C2 also unable to display as A1 didn't contain the data of C1 & C2 at all
I think what you want is not an additional group, but you want to nest your tablix inside of a list object. There's not any way to add both a column group and a row group inside of a universal grouping unless you use another control item. Then, you can add the grouping on the list item and it will do what you need. In the image below, you can see that my tablix is inside of a single row of a list object and the list object is grouped by a master ID for this report. This allows the inner row and column groups to expand as necessary, but separates them based on the master ID. I also put page breaks on this list item to put each ID on a new page.
I am trying to write an SSRS report where the output is grouped by team, with each team starting on a new page, and on a new tab when the report is output to Excel. I want the column headers to repeat each time there is a new team, and at the top of each page if one team's data spans more than one page.
My test data is generated by the following code:
WITH
team_list(team_id,team) AS
(
SELECT 1, 'red'
UNION ALL SELECT 2, 'orange'
UNION ALL SELECT 3, 'yellow'
UNION ALL SELECT 4, 'green'
),
results1(result_value1) AS
(
SELECT 1
UNION ALL SELECT 2
UNION ALL SELECT 3
UNION ALL SELECT 4
UNION ALL SELECT 5
),
results2(result_value2) AS
(
SELECT 7*result_value1
FROM results1
),
main_query(id, team, value1, value2) AS
(
SELECT
tl.team_id
, tl.team
, r1.result_value1+20
, r2.result_value2
FROM
team_list tl CROSS JOIN results1 r1 CROSS JOIN results2 r2
WHERE
r1.result_value1 < tl.team_id+2
)
SELECT * FROM main_query
I want the report to look like this:
I inserted a Tablix with three columns: id, value1 and value2. I right-clicked on Details under "Row Groups", and did Add Group>Parent Group, Group by Team. I did not tick either "Add group header" or "Add group footer".
I clicked on Team under "Row Groups". Then in the Properties Window, which was showing "Tablix Member", I expanded Group and then Page Break, and set Page Break to Between. I also set PageName to Fields!team.Value.
To get the column headers to repeat, I clicked on the down arrow next to "Column Groups" and chose Advanced Mode. I clicked on the second occurrence of Static under "Row Groups" and in the Properties pane, set RepeatOnNewPage to True. I now had a report with a page break between teams, and it repeats the column headers on every page. When I exported it I got a tab for every team with the team name on it. Good.
Now, I do not want the first column of the table, Team. So I right-clicked the column and chose Delete Columns, then Delete Columns Only. I saw that under "Row Groups" the top "Static" had disappeared. My report no longer repeated the column headers on every page.
I tried hiding the two cells in the first column of the table, and this seemed to give the desired effect, apart from indenting the table to the right. I tried to set the width of this column to zero, which does not seem to be possible. When I exported the report I got a very narrow Column A. Is there any way of getting rid of this column altogether, while still having repeating column headers?
For my team heading, I inserted a row above the top row of the Tablix. I merged the three cells above my column headings. I right-clicked and added the expression ="Team " & Fields!team.Value. This displayed "Team red" for all the teams, instead of changing on each page. How can I make a heading row that will show the correct team name for each group?
You need an extra row in the team group. The easiest way is to do this is to add a header when you added your team group.
So in the 1st paragraph of your step-by-step..
from Details to Add Group -> Parent Group, select Team and check the add header option.
Double-click the new Team row group in the row group panel and set page breaks to between
Now you will have three rows in the table, ignore the fact that rows 2 and three are merged in column 1, we'll get rid of that once everything else is done.
Right-Click on one of the cells in row 2 (e.g. column 2 row 2) and choose Insert Row -> Inside Group - Above.
the table will look something like this..
Next copy the column hedaers (id, value1 and value2) to hte row direclty above the cells with the actual data in (should be row 3).
Then in row 2 select the three cells above your data column and merge them.
Select team as the field for this merged cell (or your expression)
It should now look something like..
Now delete the first row and first column as we don't need these anymore.
Next click the advanced mode from the drop down next to the column groups as you did before.
Select the two static items in the ROW GROUPS and set the "RepeatOnNewPage" to true.
Finally, for testing, I set the interactive size height property of the report to 10cm (so I could force some page breaks before then end of each group).
After following this, the report worked as expected, below you can see the 2nd page for yellow has the correct header.
In case it's useful, I used Report Builder 2016 to build the sample RDL. You can get hold of it here, you'll just need to edit the connection properties to get it to run.
Link to GroupHeaderRepeat.rdl
https://1drv.ms/u/s!Al1Kq21dFT1ijb5Qmm2P4zyM1MV4pA
I have a dataset looks like
Now I want to create a report where Dept as a group should be on row header for each group. looks like
I tried adding Dept as a parent group, but it appears on a column not as a header on top of each group.
But I want to achieve this:
Any idea? Thanks.
Nian
You have "Grp" as parent group and "Sg" as child group right ? So add columns "Grp" and "sg" outside the group and hide the grouping columns.
As per above screenshot
Add a table in design pane
First add attributes for 3 columns OwnerID, Name and City
right click on ownerID detail cell and add parent group of ownerID, new group column will be created here as 1st highlighted column. Click on it and add child group as Name(another group column will be created).
At last hide both the group columns.