I have an execute sql task defined in my package which will execute a stored procedure. When the stored procedure is executed it will return user credential. I have to store the credential in a variables and then use these credentials in a new script task.
The following is what I have tried so far.
STEP 1 - I have created SQL task
On General TAB set following properties:
Resultset: Single row
connectionType: OLE DB
Connection:SourceDestination
SQLSourceType:DirectInput
SQLStatement: Execute dbo.GetLoginInfo1
ByPassPrepare = False
STEP 2 - Parameter Mapping Tab
Variable Name = User::DatabaseUserName
Direction = Output
Data Type = NVarchar
Parameter Name = #UserId
Parameter Size = 50
STEP 3 - Result Set tab
Result Name = 0
Variable Name = User::DatabaseUserName
When I executed the task I got following errors.
[Execute SQL Task] Error: Executing the query "EXECUTE [dbo].[GetUserLoginInfo1]"
failed with the following error: "Value does not fall within the expected range."
Possible failure reasons: Problems with the query, "ResultSet" property not set
correctly, parameters not set correctly, or connection not established correctly
When I debug I got to see following information:
Break ON Pre execute:
User::DatabaseUserName = {Hi}
Break ON Post Execute: (error happens but the values gets chanage)
User::DatabaseUserName = {User1}
Sorry just forgot to mention the creation of variables. I have create one variable as listed below.
Name = DatabaseUserName
Scope = Package1
Datatype = String
Value = Hi
The below mentioned is the stored procedure that I have used.
ALTER PROCEDURE [dbo].[GetUserLoginInfo1]
AS
BEGIN
SELECT userid AS userid
FROM login_credentials
WHERE servername= 'server1'
END
I have tried and read lot many sites but I am still facing the problem.This is my second day on it and have to resolve it before tomorrow morning so any help will be really appreciated.
You should completely omit STEP2. (However, your procedure does not have any output column.)
STEP 1, and STEP 3 are all right. (In STEP 3 you could use userid in the Result Name column of the grid, but the ordinal will be absolutely good.)
Related
Hi I am trying to return a ResultSet from an "Execute SQL Task" in SSIS.
I am then trying to save the result in a "ResultSet" variable.
My Query works in the console and my connection is ok to.
Here is my Query
SELECT Src FROM [myDB].[dbo].[myTable] group by Src
Src is nvarchar(255)
When I execute the task I am getting following error
[Execute SQL Task] Error: Executing the query "SELECT Src
FROM [myDB].[dbo].[myTable..." failed with the following error: "The type of the value (DBNull) being assigned to variable "User::ResultSet" differs from the current variable type (String). Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I am also attaching the screen shots for the Task setup.
Please help.
ExecuteSQL Screen1
ExecuteSQL Screen2 - ResultSet setup
In SSIS 2012 within a ForEach loop using an ADO enumerator, you are unable to assign a null value to a variable of type String when the source value came from a SQL query returning a null value.
I would suggest Derived Column Transform feature of SSIS
you'll use the SSIS ISNULL function to detect the NULL value - and then do something with it.
More info about Derived Column Transform
For example transforming String column:
ISNULL([String-Column]) ? "There Was No Value" : [String-Column]
I am working in SQL Server 2008 and BIDS (SSIS). I am trying to generate a "load ID" for when a package is executed and store that ID in a load history table (which then populates subsequent tables).
My basic SSIS control flow is the following:
Execute SQL Task, Data Flow Task
The load table is created via the following:
CREATE TABLE dbo.LoadHistory
(
LoadHistoryId int identity(1,1) NOT NULL PRIMARY KEY,
LoadDate datetime NOT NULL
);
The editor for the Execute SQL Task is as follows:
General:
ResultSet = None
ConnectionType = OLE DB
SQLStatement:
INSERT INTO dbo.LoadHistory (LoadDate) VALUES(#[System::StartTime]);
SELECT ? = SCOPE_IDENTITY()
Parameter Mapping:
Variable Name = User::LoadID
Direction = Output
Data Type = LONG
Parameter Name = 0
Parameter Size = -1
SSIS is throwing the following error:
[Execute SQL Task] Error: Executing the query "INSERT INTO dbo.LoadHistory
..." failed with the following error: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
This error message doesn't really help me find the problem. My best guess is that it's due to the parameter mapping, but I don't see my mistake. Can anybody point out my problem and provide the fix?
I figured out my problem. System::StartTime needs to have DATE as its data type, not DBTIMESTAMP.
I was passing three parameters.
In the Parameter Name property I had:
0
1
3
Corrected it to:
0
1
2
It works now, no multiple-step operation generated errors message.
Hi I've an SSIS Package which Does tasks like a)Truncate Last 7 days data from a table if any and then re-load it and all theses are placed in a sequence container and it run's fine.Now I'm planning to remove the hard coded value of 7 and introduce a variable NoOfDays which I can provide at run time.Can this be achieved?
I added a variable and tried to map it to the parameter of the ExecuteSQL Task...It gave the following error:
I even want the value to be available to the next step Data Flow Task
[Execute SQL Task] Error: Executing the query "delete from USER_CONTENT where CONVERT..." failed with the following error: "The variable name '#NoOfDays' has already been declared. Variable names must be unique within a query batch or stored procedure.
Statement(s) could not be prepared.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The query I'm using is
delete from USER_CONTENT
where CONVERT(date,ISSUE_DATE)>=CONVERT(DATE,GETDATE()-7)
and it is against an OLE-DB connection.
I do not have enough points to post a comment so I will have to ask you this way: are you using query parameters with a "?", if not, then in order to use a package variable with a stored procedure, you will need to write your statement to use them, also, don't name your parameters, use the default 0,1,2 etc.. that the package assigns.
I need to execute sql task based on parameter.
Lets say if my #parameter = 1 then execute this sql if #parameter = 2 then execute this sql. I think of a work around but is there anything straight forward such as Len(?) or Len(#parameter1) ..
Bottom line: I need to execute sql query based on what's passed to parameter.
Let me know if that's possible.
If you want an Execute SQL Task to run a different stored procedure based on a variable, then there are a few options:
You could create a stored procedure that takes a parameter. The stored procedure would use IF ELSE code to execute the code as described in a comment by Lamak. This is a less than ideal solution if you want to execute different stored procedures. This could work if you only have a very small number of queries or stored procedures to execute.
You could write a variable that calculates the name of the stored procedure based on an expression. This could work well if you only have a few stored procedures to execute, but it does not scale for a large number of stored procedures. It also is hard to understand from a coding perspective, particularly if the expressions are complex.
You could write a query or stored procedure that generates a separate stored procedure call command. You could run an Execute SQL Task the loads a result set. The result set would map to a variable of Object data type. You could then iterate through the variable in a For Each Container to assign values to variables. Easier to manage than 100 expressions if you have a lot of code to vary.
Based on your comment to me it sounds like you want to try option 2. The following are detailed steps for option 2:
In the Variables window at the package-level scope create a variable called SqlCommand of data type String.
Set the EvaluateAsExpression property for the SqlCommand variable to True.
Click on the expression builder link.
The following is a sample IF THEN ELSE expression using the Conditional operator.
1 == 0 ? "SELECT SomeField = GETDATE();" : "SELECT SomeField = GETDATE() - 2;"
If 1 equals 0, then the first command will be returned. If 1 does not equal 0, then the second command will be returned. In this case, since 1 does not equal 0, the second command is returned. You can change the 1 == 0 section to be the condition you actually want to evaluate.
Add an Execute SQL Task to the control flow.
Open the Execute SQL Task Editor.
Set Connection to your desired database connection manager.
Set SQLSourceType = Variable.
Set SourceVariable to User::SqlCommand.
Close the editor and test the package.
user1810575 has asked this question again in ssis-execute-sql-task-based-on-parameter, see my answer (which is copied here as well).
You cannot use Execute SQL Task to run Transact-SQL statements.
For setting conditional SQL Statement based on what you are trying to achieve.
In Execute SQL Task editor
In general tab, leave the SQLStatement blank.
In parameter mapping tab, add parameter and map User::Parameter variable to Parameter Name 0.
In Expression tab, set the SQLStatementSource to
(DT_NUMERIC, 18, 0) #[User::Parameter]==1 ? ...query 1... : ...query
2...
I have declared a variable at the package level compdate and am testing data flow to the variable by droping an Execute SQL Task in the Control Flow of the package.
In the task,
SQL Statement:
select ? = (getdate() - 1)
Parameter Mappings:
Variable Name: User::compdate
Direction: Output
Data Type: DATE
Parameter Name: 0
Parameter Size: -1.
Why am i getting error:
[Execute SQL Task] Error: Executing the query "declare #compdate date
set #compdate = (getdate() ..." failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I do not see why you need to execute an SQL statement to get the previous day as this can be done in various other ways.
To answer your question though, since you are trying to store the result of the SQL query from your Execute SQL Task you have to change the SQL statement that you have provided.
Your new query:
SELECT (GETDATE() - 1) AS DateVar
Where DateVar will be the single parameter that is returned which you need to map to your variable.
You need to delete your Parameter Mappings as they are not needed. Open up the Result Set tab and Add a new result. Set the Result Name to be DateVar and set the Variable Name to be your variable User::compdate
You then need to set up your Execute SQL Task to return a Single Row result set in the General tab, mapped to your variable. Select Single row for the ResultSet option.
Working with result sets is explained in great details here. Scroll down to the 'Working with a Single-Row Result Set' section, it has a great example which you can follow.
If you want to use without using the result set. try with following steps.
Create the stored procedure in your respective database. Following
code is an example.
CREATE proc GetYesterDay(#yesterday datetime output)
as
Select #yesterday=getdate()-1
Create the ADO.NET connection to run the stored procedure. In which, you can mention the direction of the input and output of the parameters.
Create the execute task and configure it as following screenshot.
Click on Parameter Mapping and configure as following screenshot.
Now SSISCompletedDate variable will be filled with respective data.
Hope this helps!