I'm currently constructing a database for users. the issue I am stuck with lies with the email field, as users are able to enter their email I then have a column after which is set up to contain the users email provider, for example
The first column will contain
Abc123#abc.com
But as the the second column, in this case I want it to just display the text after the "#" symbol, so it should read
Abc.com
How would I go about setting this filter, or is it even possible? having to enter this manually would make the database inefficient.
You can use split, mid, instr any number of text functions. For example:
Provider = Split(Email & "","#")(1)
Or
Provider = Mid(Email & "", Instr(Email & "","#")+1)
This is assuming you have used a text field for email, if you have used a hyperlink field, and I recommend that you do not, it gets more complicated.
Related
data output
I am pretty new to Webi and am having an issue creating a variable. I'm trying to check if there is more than 1 email address for each entity legacy account number and if 1 of the contact names contains "Annual Report". So when I flag each entity legacy account number for no email only the ones without a contact name that contains "Annual Report" will be pulled. In the example above only the yellow groups should be called no email. Right now all of them are being pulled into no email. I have tried using if and match as those are what I am most familiar with. Does anyone have any suggestions?
There are number of ways you could do this. I am going to give an example using two variables, but you could easily combine them into one.
Has No Email Var=If(Match(Upper([Contact EmailAddress]); "NOEMAIL*"); 1; 0)
Annual Report Contact Name Var=If(Match(Upper([Contact Name]); "ANNUAL REPORT*"); 1; 0)
Then you would apply a report filter with two components...
Has No Email Var = 1
AND
Annual Report Contact Name Var = 0
Let me explain a few things...
The purpose of the Upper function is the Match function is case sensitive. If you know your email address are always lower case then you could remove that the Upper function and have it match on "noemail*".
It is significant that I only have a asterisk ("*") at the end of the string being sought. That will only find a match where the corresponding column value starts with that string. If you want it to be true whenever the string is found anywhere in the column being searched you would be asterisks on both ends.
You could also put limiting criteria in your query filter. But here is where thing can get confusing. Within the query filter you can choose the Matches pattern operator. However, the wildcard character is different ("%" rather than "*") and you do not put double-quotes around your search text. So you would have some thing like this...
Contact EmailAddress Matches pattern noemail%
AND
Contact Name Different from pattern Annual Report%
I am sure you noticed I didn't convert the search text to uppercase. In the Query Panel Web Intelligence is case-insensitive and would likely follow the case-sensitivity of the database of the source data. All of our databases are case-insensitive so if yours is case-sensitive you may need to play around this this a bit. Or just go with the approach of creating the variables and report filters as I initially laid out.
If you want a wildcard for a single character rather than multiple characters (which is what "*" and "%" will do) you need to use a "?" within your variable definition or a "_" in your query filter.
Hope this helps,
Noel
I have a form that contains a command button, six unbound text boxes, and a query subform. The user enters data in the unbound text boxes to search for. When they press the search command button the query will search for the data entered into the text boxes. I have no problem with this working with my current code. However, if the user does not enter the information exactly as it is in the main table then a message box saying “No records found” is displayed. I know this may be a very simple fix but I would like for when the user enters data (example: cable) the query should display all records that contain the word or characters (example: rj-45 cable).
If DCount("*", "Admin Customer Owned Parts Query") = 0 Then
MsgBox "No Records Found"
Else
Me.Admin_Customer_Owned_Parts_Query_Subform.Requery
End If
You need to set your query to use the LIKE operator and then enclose your search terms in *'s. So if you wanted to find the word cable anywhere in the field you would put;
WHERE Fieldname LIKE '*cable*'
in your query's SQL statement.
I have a field with a customer ID that should be in the format of C0000000001, where it has a letter at the start and up to 10 numbers after the letter with leading zeros between the letter and the number. I want the users to be able to put in C1 and have the table save C0000000001 or C1234 and have the table save C0000001234.
I want the restriction to be on the hard data in the table. The table should contain the full customer ID but I only want the users to have to enter the C and the number of the customer when entering/searching for customers. I am using Access 2010.
I believe that the first character will always be a C, but either way, it would only be one alpha character if it wasn't.
I understand what you are saying, but the majority of the data (thousands of records) are going to be from another system that stores them that way. Doing it this way limits my margin of error. Otherwise, exports from the other system will need to be manually changed prior to being imported into the database and vice versa.
Searching would only be on existing records that will be saved in the C0000001234 format, but I would like user to be able to omit the leading zeros when entering the search criteria.
This question, combined with your previous question here, suggest to me that you are trying very hard to have the data structure in your Access database exactly match the legacy system from which you receive bulk updates. That may not be necessary, or even desirable.
For example, instead of maintaining the CustomerId as Text(11) (as in the old system) you could store it in your Access database as
CustomerIdPrefix: Text(1), and
CustomerIdNumber: Long Integer or perhaps Decimal if the numeric part really can exceed 2,147,483,647
Your Customers table in Access could also include a calculated field named CustomerId as
[CustomerIdPrefix] & Right("0000000000" & [CustomerIdNumber], 10)
to give you a single 'C0000012345' value for display purposes.
For searching, your form could have a Text Box for the Prefix (default value: 'C') and another text box for the numeric part. The search could then use a condition like
[CustomerIdPrefix] = txtPrefix.Value AND [CustomerIdNumber] = txtNumber.Value
or, if the user wanted to create a Filter on the Form (or Datasheet View) it would probably be sufficient to just filter on the number part.
If you ever needed to feed information back to the legacy system you could just export a query that includes the [CustomerId] calculated field (and omits [CustomerIdPrefix] and [CustomerIdNumber]) and you'd be fine.
My suggestion would be to use forms with associated queries using the FORMAT function.
You do need to clarify where you want this implemented, but I'm going to assume you have a table set up and that you would like to be able to enter/search data from a form.
I'll create one form for input frmAdd. For the input form, I created a query that would run when a button on the form was pressed. Add two text boxes newID and newOther to the forms which are unbounded but which the user can use to enter data. The query will then pull that data and append it to your table in an altered format. Here's the SQL for that query:
INSERT INTO Customers ( [Customer ID], [Other Field] )
SELECT Left([Forms]![frmAdd]![newID].[value],1)
& Format(Right([Forms]![frmAdd]![newID].[value],Len([Forms]![frmAdd]![newID].[value])-1),"0000000000")
AS Expr1, Forms![frmAdd]!newOther AS Expr2
FROM Customers;
I'm not sure exactly what search functionality you're looking for, but this query would pull up the record data matching that of a frmSearch with a textbox search which would have the format C### or whatever entered in:
SELECT Left([Customers].[Customer ID],1) & Replace(LTrim(Replace(Right([Customers].[Customer ID],9),'0',' ')),' ','0')
AS Expr1, Customers.[Other Field]
FROM Customers
WHERE (((Customers.[Customer ID])=Left([Forms]![frmSearch]![search].[value],1)
& Format(Right([Forms]![frmSearch]![search].[value],Len([Forms]![frmSearch]![search].[value])-1),"0000000000")));
Applying the input mask is just a way to ensure that your data is correct. If you feel the need to use one, go to the table in Design View and click on the Data Type box for the customer ID field. Find Input Mask under Field Properties -> General and click it. Then hit go to the toolbar -> Design tab -> Builder. This will walk you through it.
Input mask is not the answer for this. Input mask forces the user to input the data in a certain manner. What you need is some VBA code to run in the AfterUpdate event on a form. There's no way within the table to force the data into this pattern allowing the input method that you've requested.
There may be a more efficient way to do this, but this does the job.
http://pineboxsolutions.com/access/customeriddemo.accdb
I'm trying to write a little form which accepts some user input, and on the basis of some logic displays one of two possible other forms. Everything is working fine if I use simple, unformatted data, but I hit a problem if the data in question has an input mask of a phone number. Presumably there's a trick here to ignore formatting characters or some such?
The actual logic looks for records in a particular table whose values match the data entered. Something like this cut down example:
A form, which is not associated with any specific table, containing one data entry field, called FormFieldY, and a button whose onClick invokes a Macro whose condition looks for matching data in a table.
DCount("*","TableX","[MyColumn] = [FormFieldY] " ) > 0
Now, if I MyColumn in the table has simple text or numeric values this works just fine. However if I apply a Telephone number input mask to that column, I never get a match. I have tried applying an input mask to my form field, or typing literally into the form field a fully formatted number
(1234) 56789012
neither gives a match. However if instead I hack the macro and enter a suitable hard-coded formatted valueL
DCount("*","TableX","[MyColumn] = '(1234) 56789012'" ) > 0
It works just fine.
I think you may have two issues going on. The first is that your format property displays the parentheses when a user types in a phone number, but those parentheses are not included in the value of FormFieldY --- they are display-only.
You can verify the value of FormFieldY by assigning this code to its After Update event:
Private Sub FormFieldY_AfterUpdate()
MsgBox Me.FormFieldY
End Sub
If you want the parentheses stored as part of FormFieldY's value, perhaps you would get more joy by using an input mask rather than a format. With Access 2003, I used this as my text box control's input mask:
!\(999") "000\-0000;0;_
But it's probably easiest to use the Input Mask Wizard (click the button with 3 dots, which is just to the right of the Input Mask line on your control's property sheet). Choose phone number on the first wizard page. On the Wizard page which asks "How do you want to store the data?", select the "With the symbols in the mask" radio button.
Comment from djna: That was the solution, the expression change below seems not to be needed
The other issue is your DCount expression:
DCount("*","TableX","[MyColumn] = [FormFieldY] " ) > 0
I think you should use the value of FormFieldY rather than the name of the control. That may not be clear, so here's what I mean:
DCount("*","TableX","[MyColumn] = '" & Me.FormFieldY & "'" ) > 0
How do I bind a text box with a field, which doesn't belong to form's "Record Source" table, through the Design View?
Example: I have "Order.cust_id" (Record Source=Order) and I want to display "Customers.name". I believe it is trivial but I have no experience with MS Access. I tried to use the text box "Control Source" property but no luck.
One method would be to convert the text box to a combo box. Then set the row source to include both the cust_Id and the Customer.Name from the customer table. SQL statement example
Select Cust_ID, Name From Customer
Order By Name;
By setting the number of columns to 2 and the column widths; the first column as zero (i.e. "0;6") then the foreign key would be hidden from the user and the customer name would be displayed.
Note this method does force you to have limit to list set to true.
Also you do end up with a drop down list which may not be what you want.
You can use DlookUp as the control source of a textbox:
=DlookUp("[Name]", "Customer", "ID=" & Cust_ID)
Syntax: What to look up, table name, where statement
The Where statement should follow the rules for Jet SQL, which means that you must use delimiters if the field is text or date format.
Note that Name is a very bad name indeed for anything. I suggest you rename the field immediately before things get worse.
It can be useful to know the error(s).
You could create a new View (e.g. OrdersAndCustomerNames), select all the columns you want to use in the form, then instead of using the Order table as Record Source, you would just switch to OrdersAndCustomerNames. You say you have no experience with MS Access, so I am guessing you are not building anything huge and overly complicated, so I would do it this way. I am quite sure it can be done more elegantly but this will do for now.