I type:
ICACLS filename
Results are:
filename No mapping between account names and security IDs was done.
(R,W)
NT AUTHORITY\SYSTEM:(I)(F)
BUILTIN\Administrators:(I)(F)
BUILTIN\Users:(I)(RX)
I would like it to report the actual SIDs, especially the one "No mapping between ...". Is that possible with ICACLS? And if not, what tool will do this?
(Update 2/22/2012) I know about the "ICACLS filename /save saveFile" syntax, but having to open an intermediate file adds complexity to writing scripts. I would prefer console output. The output stored in "saveFile" looks like this...
filename
D:AI(A;ID;FA;;;SY)(A;ID;FA;;;BA)(A;ID;0x1200a9;;;BU)(A;ID;0x12008f;;;S-1-5-83-1-xxxxxxxxxx-xxxxxxxxxx-xxxxxxxxxx-xxxxxxxxxx)
You can write ICACLS filename /SAVE con: to send the output to the console. But I suspect that format may still not quite be what you had in mind.
In the absense of any other answers, I will say that the only way is to use the "ICACLS filename /SAVE output_file" syntax. Not what I wanted.
Related
I have a pipeline that processes some files, and in some cases "groups" of files. Meaning the files should be processed together and are correlated with a timestamp.
Ex.
Timestamp#Customer.csv
Timestamp#Customer_Offices.csv
Timestamp_1#Customer.csv
Timestamp_1#Customer_Offices.csv
...
I have a table with all the scopes, and files with respective filemask. I have populated a variable in the beginning of the pipeline based on a parameter
The Get files activity goes to a sFTP location and grab files from a folder. Then I only want to process the "Customer.csv" and ".Customer_Offices.csv" files. This is because the folder location has more file types or scopes to be processed by other pipelines. If I don't filter, the next activities end up by processing metadata of files that are not supposed to. In terms of efficiency and performance s bad, and is even causing some issues with files being left behind.
I've tried something like
#variables('FilesToSearch').contains(#endswith(item().name, 'do I need this 2nd parm in arrays ?'))
but no luck... :(
Any help will be highly appreciated,
Best regards,
Manuel
contains function can direct for a string to find a substring, so you can try something like this expression #contains(item().name,'Customer')
and no need to create a variable.
Or use endsWith function and use this expression:
#or(endswith(item().name,'Customer.csv'),endswith(item().name,'Customer_Offices.csv'))
When I run my PsychoPy experiment, PsychoPy saves a CSV file that contains my trials and the values of my variables.
Among these, there are some variables I would like to NOT be included. There are some variables which I decided to include in the CSV, but many others which automatically felt in it.
is there a way to manually force (from the code block) the exclusion of some variables in the CSV?
is there a way to decide the order of the saved columns/variables in the CSV?
It is not really important and I know I could just create myself an output file without using the one of PsychoPy, or I can easily clean it afterwards but I was just curious.
PsychoPy spits out all the variables it thinks you could need. If you want to drop some of them, that is a task for the analysis stage, and is easily done in any processing pipeline. Unless you are analysing data in a spreadsheet (which you really shouldn't), the number of columns in the output file shouldn't really be an issue. The philosophy is that you shouldn't back yourself into a corner by discarding data at the recording stage - what about the reviewer who asks about the influence of a variable that you didn't think was important?
If you are using the Builder interface, the saving of onset & offset times for each component is optional, and is controlled in the "data" tab of each component dialog.
The order of variables is also not under direct control of the user, but again, can be easily manipulated at the analysis stage.
As you note, you can of course write code to save custom output files of your own design.
there is a special block called session_variable_order: [var1, var2, var3] in experiment_config.yaml file, which you probably should be using; also, you should consider these methods:
from psychopy import data
data.ExperimentHandler.saveAsWideText(fileName = 'exp_handler.csv', delim='\t', sortColumns = False, encoding = 'utf-8')
data.TrialHandler.saveAsText(fileName = 'trial_handler.txt', delim=',', encoding = 'utf-8', dataOut = ('n', 'all_mean', 'all_raw'), summarised = False)
notice the sortColumns and dataOut params
I'm trying to create a test that will loop depending on the number of files stored in one folder then output results base on their filename. I'm thinking to use their filename as the name of their result, so for this, I created something like this in BS preProcessor:
props.setProperty("filename", vars.get("current_tc"));
Then use it for the name of the result:
C:\\TEST\\Results\\${__property(filename)}
"current_tc" is the output variable name of a ForEach controller. It returns different value on each loop. e.g loop1 = test1.csv, loop2 = test2.csv ...
I'm expecting that the result name will be test1.csv, test2.csv .... but the actual result is just test1.csv and the result of the other file is also in there. I'm new to Jmeter. Please tell me if I'm doing an obvious mistake.
Test Plan Image
The way of setting the property seems okayish, the question is where and how you are trying to use this C:\\TEST\\Results\\${__property(filename)} line so a snapshot of your test plan would be very useful.
In the meantime I would recommend the following:
Check jmeter.log file for any suspicious entries, if something goes wrong - most probably you will be able to figure out the reason using this file. Normally it is located in JMeter's "bin" folder
Use Debug Sampler and View Results Tree listener combination to check your ${current_tc} variable value, maybe it is the case of the variable not being incremented. See How to Debug your Apache JMeter Script article to learn more about troubleshooting tecnhiques
I need to resolve a parameter value depending upon whether I have a serial or multifile. Below is the scenario...
I have created a generic graph where I have a reformat component just after the input file component... At run time! I need to check input file if it is serial or multi... And accordingly I have to populate the layout of reformat...!
Hence.. To achieve this I am looking for some specific abinitio function...!
Thanks
I think there is a function - m_fs_check.
You can use this function in the graph parameters and use the resolved value as a condition to determine the layout.
m_fs_check will check if the directory is a serial or multi directory. However a user can still create a serial file on a multi directory. One option is fire a m_ls -lt command. Result displays a flag 'M' which denotes that a file is multi file. For serial files this flag remains blank.
Use m_expand($INPUT_FILE_PATH) in PDL at PSET level to identify directory depth. if depth is greater than one then its multifile else serial.then use output flag into your reformat.
When I use AppleScript to get the properties of an object, a record is returned.
tell application "iPhoto"
properties of album 1
end tell
==> {id:6.442450942E+9, url:"", name:"Events", class:album, type:smart album, parent:missing value, children:{}}
How can I iterate over the key/value pairs of the returned record so that I don't have to know exactly what keys are in the record?
To clarify the question, I need to enumerate the keys and values because I'd like to write a generic AppleScript routine to convert records and lists into JSON which can then be output by the script.
I know it's an old Q but there are possibilities to access the keys and the values now (10.9+). In 10.9 you need to use Scripting libraries to make this run, in 10.10 you can use the code right inside the Script Editor:
use framework "Foundation"
set testRecord to {a:"aaa", b:"bbb", c:"ccc"}
set objCDictionary to current application's NSDictionary's dictionaryWithDictionary:testRecord
set allKeys to objCDictionary's allKeys()
repeat with theKey in allKeys
log theKey as text
log (objCDictionary's valueForKey:theKey) as text
end repeat
This is no hack or workaround. It just uses the "new" ability to access Objective-C-Objects from AppleScript.
Found this Q during searching for other topics and couldn't resist to answer ;-)
Update to deliver JSON functionality:
Of course we can dive deeper into the Foundation classes and use the NSJSONSerialization object:
use framework "Foundation"
set testRecord to {a:"aaa", b:"bbb", c:"ccc"}
set objCDictionary to current application's NSDictionary's dictionaryWithDictionary:testRecord
set {jsonDictionary, anError} to current application's NSJSONSerialization's dataWithJSONObject:objCDictionary options:(current application's NSJSONWritingPrettyPrinted) |error|:(reference)
if jsonDictionary is missing value then
log "An error occured: " & anError as text
else
log (current application's NSString's alloc()'s initWithData:jsonDictionary encoding:(current application's NSUTF8StringEncoding)) as text
end if
Have fun, Michael / Hamburg
If you just want to iterate through the values of the record, you could do something like this:
tell application "iPhoto"
repeat with value in (properties of album 1) as list
log value
end repeat
end tell
But it's not very clear to me what you really want to achieve.
Basically, what AtomicToothbrush and foo said. AppleScript records are more like C structs, with a known list of labels, than like an associative array, with arbitrary keys, and there is no (decent) in-language way to introspect the labels on a record. (And even if there were, you’d still have the problem of applying them to get values.)
In most cases, the answer is “use an associative array library instead.” However, you’re specifically interested in the labels from a properties value, which means we need a hack. The usual one is to force an error using the record, and then parse the error message, something like this:
set x to {a:1, b:2}
try
myRecord as string
on error message e
-- e will be the string “Can’t make {a:1, b:2} into type string”
end
Parsing this, and especially parsing this while allowing for non-English locales, is left as an exercise for the reader.
ShooTerKo's answer is incredibly helpful to me.
I'll bring up another possibility I'm surprised I didn't see anyone else mention, though. I have to go between AppleScript and JSON a lot in my scripts, and if you can install software on the computers that need to run the script, then I highly recommend JSONHelper to basically make the whole problem go away:
https://github.com/isair/JSONHelper