This might be irritating simple. I am trying to convert some code from actionscript to cocos2d. I am quite new to actionscript and would like to know if there is a cocos2d function for mouseX/mouseY. If not, what would be the equivalent. Can someone please help me.
In Kobold2D (which is based on cocos2d-iphone) you can use the mouseLocation:
CGPoint mousePos = [KKInput sharedInput].mouseLocation;
KKInput captures the mouse location every time it receives an event. If mouse moved events are enabled, mouse location gives the accurate location of the mouse.
The alternative is to use the NSWindow method mouseLocationOutsideOfEventStream.
Related
I want to click on Starling buttons using the LeapMotion SCREEN_TAP gesture.
This is possible? To click the Starling button and see the regular push/shrink effect on it using this gesture?
If not...what is the best approach to achieve this?
Any help is welcome!
Regards.
I assume you could do this (I have never done it but I think it should work):
Check whether the tap's coordinates are over the button
If they are, swap the button's texture: var up:Texture = btn.upState; //save reference
btn.upState = btn.downState;
After X milliseconds swap them back: btn.upState = up;
I've found some stuff online about how to animate in actionscript 3 from within a class, but haven't been able to find a really good tutorial. I want to control the animations from a class because at some point I intend to move from the flash IDE to using flash develop, where I won't have access to the Flash IDE's timeline.
I have to be able to control an initial animation (opening a bag) which joins onto an animation loop (searching through a bag).
The only way I have been able to do this so far is to add an event listener to listen for the initial animation's final frame. Then when initialAnimation.currentFrameLabel = "Last" then I gotoAndStop("animationLoop").
This has been working fine, if a bit time-consuming. I'm just wondering if there's a better, easier way to do it? Can anyone tell me or point me towards a tutorial that does it better? Thanks very much!
Romano
I recommend instead of using an event listener, you use the method addFrameScript. Essentially you can fire a method when a specific frame number is reached.
Read the following question for more information.
actionscript3 whats the point of addFrameScript
It depends on what it is you want to do:
Usually if you are working together with an artist or want to do animations that are non-code driven, the "best way" is usually to listen for something to happen, and then start animations and on last frame of animation (or when you want to return control to code) you create an event, or use a callback or something else to let code notify that animation is complete or reached a certain point.
If you want to do something from code, the easiest way is to use an external animation library.
Tweener (https://code.google.com/p/tweener/)
TweenLite (http://www.greensock.com/tweenlite/)
Using those libraries, you would write something similar to:
function fadeOut():void {
mc.alpha = 1;
Tweener.addTween(mc, {alpha:0, time:0.275, delay:1, onComplete:onDone});
}
function onDone():void {
trace("Animation finished");
}
Hi Im relatively new to flash developing and i have a quick question about saving user input. I have a maze scene whereby the user navagates a character around until confronted with another object, when the character hits the object a new scene is opened promting the user to pick a solution to a problem. Once the user clicks the correct answer a box appears saying return to the maze, however when clicked and returned to the maze the character starts back in its original postion, where as I would like the scene to resume where it left off, ie the character is at the point where it collided with the object, the object has dissappeared and the character can resume on the same course.
Thanks for giving this a read I hope it makes sense and some one has a solution for me.
I did have some nice images to explain it better but apprently i need 10 reputation points to upload those.
EDIT: First Id like to say thanks for the rep points you bunch of stars and secondly I know using scenes in flash is seriously cr*p practice and outdated but its the way I learnt all those years ago and seen as Flash itself will be outdated soon Im not really looking to learn another approach using sprites or frames, I just kind of want a fix for this way if poss thank you for answering!
EDIT: Wanting the red rectangle to be removed from the scene once the black square collides with it. It also takes you to the next frame upon doing so. here is my code.
addEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler);
function fl_EnterFrameHandler (event:Event):void
{
if (player.hitTestObject(Risk))
{
removeEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler);
removeChild(Risk);
nextFrame();
}
}
I'd suggest you forget about Scenes! They are old, buggy, bring loads of issues with code and are generally a Bad Pratice!! So if you are just learning AS3, dont learn with Scenes!!
Use MovieClips or Sprites instead. And just add and remove them as you need!
EDIT:
To ur edit ;)
and seen as Flash itself will be outdated soon
thats just plain false and a widespread misinformation. It just has a new purpose like MultiPlattform Game Development. But thats a whole different discussion.
You could solve this by saving the x,y coordinates and then restoring them. But i promise you, you will run in to alot more problems/bugs as you go allong!
Like saved Points and Time. Will you triger the Questionscene again when u place the player on the object(last Position). Save the answers, and so on ...
Changing to DisplayObjects will save you time in the end. Just saying ;)
EDIT2:
your code in the comment should look like this:
function fl_EnterFrameHandler (event:Event):void
{
if (player.hitTestObject(Risk))
{
removeEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler);//remove to prevent errors if it fires again and there is no Object to hitTest
removeChild(Risk);// do what needs to be done on this frame
nextFrame();// and then move to the next
}
}
And following correct convetions and make everybody's life easier reading this, it would look like this!
function fl_EnterFrameHandler (event:Event):void
{
if (player.hitTestObject(risk))
{
removeEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler);//remove to prevent errors if it fires again and there is no Onject to hitTest
removeChild (risk);
nextFrame ();
}
}
i'm probaly confusing u now, just use the top one ;)
EDIT3:
Ok, i just had a butchers at it. It's all on a single Frame now. I would have prefered Classes but that'lljust confuse you.
To add new qestions you just have to dublicate the Question MovieClip in the Library and change texts, leave instance names the same tho, then the code will work as is!
DOWLOAD
It is certainly possible. You would store the characters attributes (e.g. current position) within a variable. Then on returning to your game you would use this variable to set the starting position of your character.
I agree that scenes are not the ideal route you should be taking. Possibly reading a good AS3 book would save you hours/days/weeks in the long run.
I've created a few buttons in Flash. I'm trying to make it so that if you click one button, the audio starts playing for that button. If you click another button, the active audio stops and the new audio of the button you clicked last start playing.
Any help please?
What you're describing is actually quite easy to do.
First things first, I recommend importing the audio into your Flash project. Alternatively, there is a way to play it directly from an external file. This is beyond the scope of my answer, so if you need help on that, you should post a question specifically covering it.
Assuming you have imported the audio file into your Flash project's library, make an as3 instance of it. (Right click the file in the library, click Properties --> ActionScript [tab] --> [Check] Export for ActionScript & [Enter name in] Class)
Now, create a definition of the sound in your code. (Assuming your two sounds were named "mySound1" and "mySound2" in the Class field of the previous step.)
var mySound1:Sound = new mySound1();
var mySound2:Sound = new mySound2();
Now, define your sound channel.
var mySoundChannel:SoundChannel = new SoundChannel();
There are two alternate ways of stopping one sound and playing another. The first is to create one function that does both every time. The second method is to create two formulas, one for "play" and one for "stop". You will need to decide which method works best for you. I'll use the two-function method below:
function stopSound():void
{
//This stops all sound in the sound channel.
//If there is nothing playing, nothing happens.
mySoundChannel.stop();
}
//In this function, we create an argument that allows us to tell the function
//what sound to we want it to play.
function playSound(soundname:String):void
{
mySoundChannel = this[soundname].play(0, 0);
}
[Note, you can tweak the play() properties to meet your needs, doing things like starting in the middle of the song, or looping it forever. 0,0 starts at the beginning, and doesn't loop. See the documentation for this.]
Now you hook up the event listeners for the buttons. (If you need help with event listeners, read the documentation.)
myButton1.addEventListener(Mouse.CLICK, btn1Click);
myButton2.addEventListener(Mouse.CLICK, btn2Click);
function btn1Click(evt:Event):void
{
stopSound();
playSound(mySound1);
}
function btn2Click(evt:Event):void
{
stopSound();
playSound(mySound2);
}
This should be enough information to get you started. In my game core, I actually have a custom class for dealing with sound playback that gives me the ability to repeat sounds, change volume, and keep sounds from conflicting with each other. I say that to emphasize that you can do quite a bit with the sound class. Do some digging in that documentation for ideas and help.
You may also consider putting a try-catch statement in the playSound function, since it will throw an reference error if you pass a name for a sound that doesn't exist.
I'm getting into actionscript3 and was wondering if there was a way to make an 'onclick' type function that returns an id or an instance name.
For example in jQuery you can do the following, which is great for then passing the id into an array or whatever you choose.
$('.menuButton').click(function(){
var collectedID = $(this).attr('id');
Is there an equivalent to this in AS3? I'm assuming grabbing the instance name would be the goal? I haven't run across ids in Flash yet. Thanks a lot everybody.
Flash doesn't have elements or ids. An instance name can be retrieved simply by callong foo.name.
Possibly the closest thing to what you want to do is add a listener for MouseEvent.CLICK to the main time line and thentrace event.target.name. play around with it and see what you find.
The precise style of coding you see in jquery doesn't really apply in AS3. It might have worked better in as2, as as2 was much closer to JS than as3.
In AS3 you hardly ever use the instance name of a DisplayObject. You would most likely pass the reference to the object.
private function clickHandler(e:MouseEvent):void
{
myArray.push(e.target);
}
addEventListener(MouseEvent.CLICK, clickHandler);