I am currently working on making my Flex application accessible.
I have an mx DataGrid that I am using for showing complex data. Each row contains information about a person and one of the columns contains a button to "submit" that person's information.
Currently if I tab to the DataGrid, it has focus on the whole thing, but I cannot tab to individual cells. For accessibility purposes, I need the user to be able to tab to each of these cells to read the information. Everywhere I've looked I've found that it seems the only way to focus on an individual cell is to set the editable property to true. However, I do not want to make the field editable, as that information should not be changed.
At the very least I would like to be able to tab to the cell that has the button ItemRendender for each person. I could set the rest of the information in the accessibilityName of that.
Is there any way to accomplish this? Or am I going to have to find a more "creative" solution?
In case anyone is wondering how to get around this, the only way I could find is to switch over to an AdvancedDataGrid. If you set the ADG's selectable property to true, you can use the arrow keys to select a whole row at a time, and the screen reader will read the whole row of information.
Then to get the effect of clicking the row's button, I set a keyboard event watcher that performs the function of the button using the target(ADG)'s selected item when you press space.
Related
I am new to Automation Anywhere. I am trying to click on specific cell value of a web page table.
I have cloned the table object and applied action "Click on cell by index" provided by automation anywhere tool on specific row and column.
Secondly, I tried Mouse Click functionality but, on search base position of cell where to click will not always be the same that's why cant implement mouse click.
Screenshot is attached what I have done so far, Nothing happens by click on the cell. I want to click on the value present in the cell.
I want to click on highlighted portion mentioned in below screenshot:
Any kind of help will be appreciated.
Could you attach a screenshot of the full search criteria? I'm sure it has to be something with the path and DomXpath.
Make sure that below points have been checked:
The object properties should be unique and non changing. This is required to identify the object correctly during execution
Check whether object cloning is working properly with current screen resolution. If not, you need to change the screen resolution
I am not really experienced with coding so I apologize in advance if this is a stupid question with an obvious answer...
I use a google sheet to keep track of things at work, and my employees use it multiple times a day. They will either type one of three phrases into a certain cell on a row, so I have created buttons using the drawing feature that they can simply click, which will insert the appropriate text into the highlighted cell.
Once this text is inserted into the cell, I would like to add something to the end of the function that automatically selects the next adjacent cell in the row (to the right) so they can continue typing in. Currently, once they click the button to insert text into one cell (e.g., B23) they have to use the mouse to manually select C23 before typing into that cell. For some reason you cannot use the right arrow key or tab key on the keyboard to move over, so I am wondering if there is a way to add the selecting process into the script (or even a workaround for allowing the tab or right arrow keys to work).
I realize this may seem like a tedious question and folks may think it is awfully lazy of me to ask for a more efficient way to move over to a cell than using the mouse, but my employees use the sheet hundreds of times a day, so I'd really like to maximize the efficiency for them to make it as easy and convenient as possible. Inputting data can be tedious enough, so I am trying to simplify things and make it as least painful as possible :)
Thanks so much!
There are several ways to select the cell at the right. One way is to use offset(rowOffset,columnOffset):
range.offset(0,1)
You are correct. When using a button the focus stays in the button when it is clicked. After some trial and error, I think I found a way that will work fot you. I created a html sidebar that is opened from a custom menu. Once opened, you can leave it opened, HTML allows control over the focus using 'google.script.host.editor.focus()'. Then you can type in the cell. Attached is my sample spreadsheet you can copy and try. Let me know if you need any help changing the button names or text. Sorry my first try didn't work correctly. https://docs.google.com/spreadsheets/d/1KlNSJnZDNIb2chUK3SlKJg79VNIrsAbIbUvHyLwTLWk/edit?usp=sharing
This is an ongoing problem, and I'm hoping there is just a property that I'm missing.
Scenario: I have a form that contains subforms. The Default View property for the subforms is set to Datasheet. (The main form is set to Single Form). Due to changes in what I'm tracking, I want to include another field that wasn't part of the original record source. So, I changed the record source (a query) and added the field to the subform. The new field is added to the end of the Datasheet view by default.
Here is the problem - when I drag the column to a new location on the subform (in Form view or Layout view), it does not stay put. I have made the change using Form view and Layout view, and I've changed the Tab Index property for the field to the proper number. The new position never stays on the first, or second, sometimes third and fourth try. I have tried saving in Form view, Layout view and Design view, but I always have to drag the column back to the new position and try to save again . This goes on until Access actually saves the change. drag, save, didn't take; drag, save, didn't take; drag...
What I'd like to know is this - how do I rearrange columns on a form that is set to "Datasheet" for the Default View property, and make it stick the first time?
Thanks for any suggestions - I must be missing something....
This is a known "limitation" of datasheets. Some want the columns fit or preset, other sticky, some either as selected by the user.
To control the order of the columns, adjust the ColumnOrder property of the displayed controls.
I want to show a placeholder in a ComboBox if no values has yet been selected or the previously selected one has been removed / deselected. For single-column ComboBoxes that works like a charm using #;"My placeholder" as the Format of the ComboBox. So far so good.
The problem starts if my ComboBox has more than one column. How can you set the placeholder value for a multi-column ComboBox? More general: How can you specify the Format for a multi-column ComboBox?
Is it for example possible to color the first column green and the second one red? And if it is possible, please tell me how.
I could not find any specification on how to set the format for multiple columns. Neither on MSDN nor on support.office.com.
P.S.: I do not care if a working solution relies on VBA or if it can achieved just by entering something in the layout or design view.
Sounds like you are outgrowing what a ComboBox can easily provide in Access.
First, combo options, and then my real suggestion.
Here are your ComboBox options:
Try conditional formatting, and see if you can get the combo's text box to change color if the value is null.
You could make a UNION query that appends your placeholder record to the top of your Combo's real recordsource
You could try to get your users used to the idea of 'blank' = null, and fix it with training.
I have never seen a way to do different combo column colors in Access.
My REAL suggestion:
Ditch the combo and go with a modal dialog form that pops up for the user. This will let you format everything much more closely to what you want.
You can put textboxes on your main form to display the placeholders.
The user clicks on the textbox to open your dialog form.
In an auto-generated chart based on a query (I dragged the chart object onto a blank form to start it), the chart itself is displaying and updating properly, datawise, but I want to change the Legend from reading "SumOfAvgOfield1" and "SumOfAvgOfield2" to regular words suitable for final presentations. But I can't find a way to change it!
I realize this is a late answer, but I was just having a similar issue and figured someone else might benefit from knowing how to get rid of the 'SumOf' labels.
In design view, right click on the chart and select 'Properties'.
Choose the Data tab.
The 'Row Source' field is the one you're going to be interested.
In there you can see various places where it's labeling your data:
Sum() AS [SumOfData]
Just edit the text right in the properties window and you'll be set.
This is WAY late, but here's what I found (Yes we still use office 2007)
Open the form in PivotTable View. Open Property Sheet. Highlight the column you want to change the Legend Caption for. Choose the Captions Tab in the properties window. There you can change the captions for each column.
Had 4 charts on a form. 3 would let me edit the Heading of the Chart, the 4th would not. Read a lot of posts that did not pertain. Noticed the datasheet for the 4th chart was completely empty.
SOLUTION: Clicked on chart until the datasheet appeared. Added mock field headings and mock data to datasheet. I could then click on chart and edit the chart's Heading. You can also highlight and change the color of selected words in the chart's Heading. Very Nice!
Good luck,
Vancer
The SumofAverageOfFiled1, etc is automatically generated. Even if you edit it in the datasheet, it changes back (or at least that is my experience). What I did to get around this is add a Rectangle and fill it with white and size it to cover up the "Sumof" captions. You can Bring to Front the Rectangle. Then you can add text boxes to label the chart's bars to read the way you want them. Drag them over the Rectange and Bring to Front.
Hope this helps.
Everywhere I looked it said just change the Pivot Table to change the Legend Entry.
Well, let me tell you.
First, if you have no Pivot Table that you can see do the following:
go to design view and select the form
right click and hit Properties. Scroll through till you see AllowPivotTableView and select yes.
Now you can go and change the column headers!
This could help
Select xxxxx, yyyyy from zzzz
Chart0.ChartSeriesCollection(0).DisplayName = ![XXXXX]
Chart0.ChartSeriesCollection(1).DisplayName = ![YYYYY]
Was very difficult to me to find a way to do it.