Using cPanel easyApache I installed Apache Tomcat 5.5.x and attempted to upgrade it to Tomcat 6.x.x
Download and expand Tomcat 6 in /usr/local/jakarta
Changed group owner to Nobody/Tomcat with 0755
Changed tomcat symlink to /usr/local/jakarta/apache-tomcat-6.x.x
Extracted and built the native daemon jsvc
Uncommented and changed /usr/local/jakarta/tomcat/conf/tomcat-users.xml
<role rolename="manager-gui"/>
<user username="tomcat" password="secret" roles="manager-gui"/>
</tomcat-users>
Copied from 5.5.x to 6.x.x
/usr/local/jakarta/apache-tomcat-6.0.33/conf/workers.properties
/usr/local/jakarta/apache-tomcat-6.0.33/conf/httpd-jk.conf
Installed Servlet from cPanel to my domain:
Main -> Account Functions -> Install Servlets
Restarted Tomcat using
/scripts/restartsrv_tomcat
I can browse to the url ie www.tomcat.com:8080 and I see the correct version number.
So in my public_html folder I created a test.jsp. When I visit it I get error:
500 Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Looking in the logs for apache, I find no errors, there is an error in the mod_jk log:
[Tue Jan 25 18:51:40 2012] [21925:47707893800752] [info] jk_handler::mod_jk.c (2686): Could not find a worker for worker name=ajp13
So checking workers.properties I see it contains:
worker.list=wlb,jkstatus
worker.list=ajp13
worker.ajp13.type=ajp13
worker.ajp13.host=localhost
worker.ajp13.port=8009
worker.wlb.type=lb
worker.wlb.balance_workers=ajp13w
Im stumped as to what else is missing that is causing the error I am seeing in the browser, any and all hints and help is greatly appreciated.
Try getting rid of your duplicate worker.list lines, and also you don't have a worker called ajp13w which you're calling as a balance_worker.
worker.list=wlb,jkstatus,ajp13
worker.ajp13.type=ajp13
worker.ajp13.host=localhost
worker.ajp13.port=8009
worker.wlb.type=lb
worker.wlb.balance_workers=ajp13
Related
I have tried to install Moodle 3.5.1 on my development server (Apache 2.4.29 and MySQL v.5.7).
The installation process went smoothly: The MySQL database has been set up, all required PHP packages are installed, the system has been successfully installed, all file permissions are correct.
After the installation I only get the following error:
"Coding error detected, it must be fixed by a programmer: PHP catchable fatal error"
There are no further error messages. There are no error messages in Apache Error log or PHP log files. In the PHP ini file the display of error messages is activated.
So I can not figure out what did not work or how to fix it.
Put error_reporting(E_ALL); and ini_set('display_errors', 1); in the beggining of the script you see problem in for more debug info
Moodle 3.5 requires PHP 7
https://docs.moodle.org/35/en/PHP
Could that be your problem?
I am referring the manual installation guide (http://docs.hortonworks.com/HDPDocuments/HDP2/HDP-2.0.9.0/bk_installing_manually_book/content/rpm-chap1.html) provided on Hortonworks website. I am facing issue while configuring the remote repositories (http://docs.hortonworks.com/HDPDocuments/HDP2/HDP-2.0.9.0/bk_installing_manually_book/content/rpm-chap1-3.html). When I am running the command “sudo wget http://public-repo-1.hortonworks.com/HDP/ubuntu12/2.x/hdp.list -O /etc/apt/sources.list.d/hdp.list” on the Ubuntu 12.04 terminal, it shows error “404 NOT FOUND”.
Below is the error:
–2015-04-13 12:59:10– http://public-repo-1.hortonworks.com/HDP/ubuntu12/2.x/hdp.list
Resolving public-repo-1.hortonworks.com (public-repo-1.hortonworks.com)… 54.192.174.35, 54.230.174.43, 54.230.174.121, …
Connecting to public-repo-1.hortonworks.com (public-repo-1.hortonworks.com)|54.192.174.35|:80… connected.
HTTP request sent, awaiting response… 404 Not Found
2015-04-13 12:59:11 ERROR 404: Not Found.
Please help me solving this issue.
Can you disable your Firewall and check if you still get this problem?
Some corporate firewalls block Hortonworks (as a source of unauthorized software)
I have a user who has successfully installed Harmon.ie to the computer, but the log file is showing an "Exception on Init" error. The complete error is below:
Starting Harmonie
2015-01-16 06:48:57,172 INFO [1] Mainsoft.Harmony.AddIn.HarmonyAddIn - OnConnection
2015-01-16 06:48:57,747 INFO [1] Mainsoft.Harmony.AddIn.HarmonyAddIn - Load Harmonie version: 3.4.0.9975 Outlook Version 14.0.0.7105 X86 bit
2015-01-16 06:48:57,748 ERROR [1] Mainsoft.Harmony.AddIn.HarmonyAddIn - Exception on Init
System.Security.SecurityException: Requested registry access is not allowed.
at System.ThrowHelper.ThrowSecurityException(ExceptionResource resource)
at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
at Mainsoft.Harmony.Utils.RedemptionCleaner.CleanOrphanRegistryKeys()
at Mainsoft.Harmony.AddIn.HarmonyAddIn.Init()
The Zone of the assembly that failed was:
MyComputer
Does anyone know the registry key that is trying to be accessed?
Harmon.ie needs to access at the stage reported in the stack traces you have originally attached the following keys under HKEY_CURRENT_USER\SOFTWARE\Classes
"Redemption.Addin",
"Redemption.AddressLists",
"Redemption.MAPIFolder",
"Redemption.MAPITable",
"Redemption.MAPIUtils",
"Redemption.RDOSession",
"Redemption.SafeAppointmentItem",
"Redemption.SafeContactItem",
"Redemption.SafeCurrentUser",
"Redemption.SafeDistList",
"Redemption.SafeInspector",
"Redemption.SafeJournalItem",
"Redemption.SafeMailItem",
"Redemption.SafeMeetingItem",
"Redemption.SafePostItem",
"Redemption.SafeReportItem",
"Redemption.SafeTaskItem",
"Mainsoft.Harmony.OutlookSidebar.TaskPaneSidebarAx"
Outlook should run under an account with sufficient privileges to read\write under HKEY_CURRENT_USER.
By the way, you are running a quite old version of Harmon.ie, I suggest you download and install the latest 4.5 version from harmon.ie web site.
--- Jean
This error indicates the user did not have sufficient permission to access this registry key.
Do you reproduce it when running Outlook as admin? (please try also to install as admin)
--- Jean
I'm trying to get a Tycho build to work on an OpenShift server. Locally resolving the target definition and building works fine, but when deploying I get the following error:
Unable to read repository at http://download.eclipse.org/rt/rap/2.2/content.xml. Permission denied
I'm not sure if its a problem in the Tycho configuration (but as far as I can remember, I didn't do anything outside the build reactor to make Tycho work) or the one of OpenShift. Could someone tell me what the problem is or how to narrow it down?
I tried switching from a target platform file to defining the repository in the pom.xml. Then I get a similar error message:
Failed to load p2 repository with ID 'rap' from location http://download.eclipse.org/rt/rap/2.2
I found a Linux bug that might be relevant. It doesn't help me, since I'm not even able confirm the server is a Debian. I tried to get the Jenkins to build on some other platform and tried any abbreviation or combination of "Windows" in the (seemingly undocumented) "platform" field, but neither of these values made it change the OS.
Finally got Maven to work with parameters (for how, see here). The log shows nothing out of the ordinary, as far as I can see:
[INFO] Computing target platform for MavenProject: org.acme.dummy:org.acme.dummy.feature:0.0.1-SNAPSHOT # /var/lib/openshift/537cb333e0b8cd68ad000187/app-root/runtime/repo/org.acme.dummy.feature/pom.xml
[DEBUG] Added p2 repository rap-repository (http://download.eclipse.org/rt/rap/2.2)
[DEBUG] Using default execution environment 'JavaSE-1.6'
[DEBUG] Registered artifact repository org.eclipse.tycho.repository.registry.facade.RepositoryBlackboardKey(uri=file:/resolution-context-artifacts#/var/lib/openshift/537cb333e0b8cd68ad000187/app-root/runtime/repo/org.acmr.dummy.feature)
May 21, 2014 10:15:59 AM org.apache.http.impl.client.DefaultRequestDirector tryConnect
INFO: I/O exception (java.net.BindException) caught when connecting to the target host: Permission denied
It's retrying to connect a couple of times, then there is the above exception:
!ENTRY org.eclipse.equinox.p2.transport.ecf 2 0 2014-05-21 10:16:00.073
!MESSAGE Connection to http://download.eclipse.org/rt/rap/2.2/p2.index failed on Permission denied. Retry attempt 0 started
!STACK 0
java.net.BindException: Permission denied
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.AbstractPlainSocketImpl.bind(AbstractPlainSocketImpl.java:376)
at java.net.Socket.bind(Socket.java:631)
at org.eclipse.ecf.internal.provider.filetransfer.httpclient4.ECFHttpClientProtocolSocketFactory.connectSocket(ECFHttpClientProtocolSocketFactory.java:82)
at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:148)
at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:150)
at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:121)
at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:575)
at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:425)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:820)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:754)
I am getting following error when I try to connect yahoo
pop3s. plus.mail.pop.yahoo.com:995
error while connecting to pop3 mail server javax.mail.MessagingException: Connect failed;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
I have already tried adding the certificate into JAVA_Home/jre/lib/security. Also when I am trying to use the same code directly using the Java/javac Cmd it works. But from tomcat it does not work.
Also: the code which I am using that was working since last two years on same server. Recently we have migrated from dedicated server to cloud based server. Backspace is the vendor where we have deployed the code.
Thanks in advance!
Vivek Agrawal
Most probably cause os this is that the system is unable to locate a valid certificate because in your migration something related to the keystore was not properly set.
Review your configuration file $CATALINA_BASE/conf/server.xml and look if the path to the correct keystore is set under Connector tag. If you are using JSSL look for this in that file
<-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
<Connector
port="8443" maxThreads="200"
scheme="https" secure="true" SSLEnabled="true"
keystoreFile="${user.home}/.keystore" keystorePass="changeit"
clientAuth="false" sslProtocol="TLS"/>
Your keystoreFile has to be set to the correct path in order your application can validate amd resolve a certificacion path in a request (the keystorepass have to be correct too, indeed).
If you have another configuration (APR or something) look at the documentation about in http://tomcat.apache.org/tomcat-6.0-doc/ssl-howto.html
Hope this help,
Cheers!!