I'm trying to use team foundation server power tools to add project reports to an existing team foundation server 2010 install. Here's the command I'm running with the output...
C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC>
tfpt addprojectreports /c ollection:https://SERVERNAME:8080/tfs/Projects /teamproject:SANDBOX / processtemplate:"MSF for CMMI Process Improvement v5.0" /validate
The project collection does not have reporting configured. Therefore,
reports cannot be added to projects in the collection.
The error message seems to indicate that reporting services has not been set up for the whole project collection. If I log into the TFS server and run the TFS admin console, hit Reporting under the application tier, each area (warehouse, analysis services and report server) indicate that everything is configured and enabled.
Also, if I point a browser to the report server configured within the admin console I get a directory listing with two data sources listed (Tfs2010OlapReportDS, Tfs2010ReportDS) and a directory called TfsReports. In the TfsReports dir there is a Projects directory and further a directory within the projects directory which contains what I'm assuming are the default reports for a project. If I drill all the way down to an actual report Build -> Build Summary, it runs just fine.
So, it seems like reports are configured for one of the team projects, but I'm not sure how this was accomplished since I'm not able to do this for other projects. If I run the previous command and use the name of the project that already has reports for it, I get the same error message.
I don't think I have the collection URL incorrect because if I totally fudge this I get a TF31002 error indicating unable to connect to TFS.
Any thoughts? Thanks a lot.
In the TFS Administration console, go to the project collection and in the Reports Folder tab ensure that you have set the Default Folder Location.
If the tab isn't showing (because you haven't closed the admin console since you configured reporting), click the refresh button at the top of the window and it should appear.
Related
I added a report project to my existing solution in VS2015, built some reports and now I am trying to deploy the project to a report server. I have gotten the URL from the config manager ( http://MyServer/ReportServer_SQLEXPRESS ) and put that in the report project properties as the target server URL.
When I click Deploy I get an error saying "The specified report server http://localhost/reportserver could ot be found.
I have no idea where it is getting this localhost reportserver URL from, that is not what is saved in the properties. The Report project is inside a solution with an MVC project. Do I need to change something at the Solution level?
Turned out I had to run VS as an administrator, I assume because of the permission on the remote server.
I'm trying to deploy an SSRS report to a remote server (that is not on my network). I'm not sure how to do this. For a machine on my network, I would just change the TargetURL, but I'm guessing there should be somewhere that I can associate credentials to deploy to a remote server, but I'm not finding it.
I know this is an old post but if someone is wondering about the same question.
I am using vs2017 enterprise. So when you configure your remote url and folder name and everything is perfect to build your project, you hit F5 or deploy your project. Upon successful building vs will prompt you for your report servers credential. Then you do the usual and vs will do its own job. In a moment you will be able to access your report.
Just read about the permission requirements before you try it.
Hope it will help someone.
Thanks
I face a similar issue delivering reports to various servers (customers and dev,qa,staging and production.) In visual studio the best way to do it is start a new project for the new server and import the new reports into it. You end up with a new project for each server.
I found TFS / VS unwieldy and my workflow to manage it unfortunately is doing it manually, or using one of a few open source report uploading tools (there are powershell scripts to do it but I find the tools are more user friendly.)
Best thing to start with is doing it manually; which will sort your initial problem.
Save the file out of your report writer to disk.
In Internet Explorer log into the Report Manager of the remote server http(s)://remoteservername/reports and navigate to the folder you want. Then upload the report.
When its uploaded you may need to fix the connection to the database.
Once you get used to doing this you can use a tool like reportsync to easily and quickly move reports between servers.
I have created a Report Server Project in Visual Studio 2013. The actual report server was a pre-existing server whose reports were previously populated via the Report Builder tool. I have downloaded the .RDL files locally and added them to the project under the /Reports folder.
When I try to deploy the reports I am receiving the 'TargetServerURL' is not valid error. I have researched the answers here and here.
I can successfully navigate to http:///Reports_PRODUCTION which displays the reports, and also to http:///ReportServer_PRODUCTION which offers an FTP-view of the report structure.
In the project properties I have set the 'TargetServerURL' to both of these URLs and neither has worked. I've verified that the target server version is correctly set - SQL Server 2008 R2. Am I missing something?
Thanks
I found out something, so that's why I post to this old question.
I had the same problems after starting a new VS2013 SSRS project and tried to deploy to the same RS server, but to a different server.
I kept getting the error: The specified TargetServerURL is not valid. Specify a valid URL for report server in the deployment settings.
After quadruple checking everything,I found that I was changing the ssrs project property on Release mode but in VS 2013 I was deploying the project in Debug mode. After changing the VS 2013 configuration to run as Release it found the right ssrs project settings and deployed fine on first run.
I read these answers and looked in my Configuration Manager (Right click project name > Properties > Configuration Manager > and picked the Server that was configured. It shows up checked like the image. I had been uploading with correct info, just didn't have the configuration fully done on my new project which used files and locations from older project:
Screenshot of Configuration Manager and Settings
I would start by looking at what SSRS thinks the service endpoint is and I bet that is the one you should be using.
Open the Sql Server 20XX Reporting Service Configuration Manager.
NOTE : This is found under the Sql Server progam group and maybe in a subfolder.
Select the service instance you want to connect to and click Connect
Navigate to the "Web Service Url" Tree List View Item in the list on the left hand side of the window.
Note the URLs: value in the "Report Server Web Service URLs" group box at the bottom of the Web Service URL panel. (This is the url you should use to connect with)
NOTE : If this is on a remote server then you will need to http or https to the domain in place of localhost or machine name if that is how the Report service was set up. If you can not access https:\\MACHINENAME/SSRS from your local machine then simply replace the url with https:\\www.mymachinenameurl.com/SSRS
make sure your deployment settings for the configuration you are deploying from are set (deploying in debug, ensure you are referring to debug deployment settings)
trust me I've been there .. Allot
I reached here because I've had the same error, and I was not able to deploy my report .
Anyways, at some point I tried to deploy the report manually by uploading to the library that I've already prepared with the Reporting Content Types, but the datasource was appearing as unknown file types, and couldn't access Manage Data Sources of the report.
tried to run the report hopelessly and noticed the url
http://ServerName/PWA/_layouts/15/ReportServer/RSViewerPage.aspx?rv:RelativeReportUrl=/PWA/Reports%20Library/Weekly%20Status%20Report.rdl
I tried to use the url http://ServerName/PWA/_layouts/15/ReportServer as "TargetServerURL" and it worked
for the other properties like the Datasets, reports ... I used the following urls
Report: http://ServerName/PWA/Reports%20Library/
DataSets: http://ServerName/PWA/Reports%20Library/Datasets
datasource: http://ServerName/PWA/Reports%20Library/datasource
and this was the end of my suffer and was able to deploy correctly and manage every property of the report, datasets, and datasources
I have report solution file with one project and one report.I have designed rdl report using BI in SSDT tools. After creating report successfully build is success and preview is ok. No problem did not arise when i did create report.
Now, I want to deploy this report to my remote reporting server. I gave a url like this www.plumeria.arvixe.com/Reports into Target server url. when i press deploy then need username and password, i gave that. after certain time it appears a errors like this.
Many times i have tried but not get a proper solution step by step deploy rdl report to remote server.
Is there any solution? Thanks.
"like this www.plumeria.arvixe.com/Reports into Target server url" is not correct. What you are referring to is the Report Manager.
You have to correctly specify:
Target Dataset folder
Target Data Source Folder
Target Report Folder -->From your project
Target Server URL-->Get it from Reporting Services Configuration Manager
Target Server version.
You may need elevvated permissions in SSDT.
My target url used in my book is as follows:
http://HODENTEKWIN7/Report_Server_Kailua
The instance name of SQL Server is Kailua and it is native mode.
This is a comprehensive book covering SQL Server 2012 both native mode and SharePoint
I am having a problem with deploying the SSRS report onto the report server. When I try to deploy the report from visual studio, I get the following error:
The permissions granted to user 'krishna' are insufficient for performing this operation.
I am not sure where to give the permissions so that the report gets deployed and I can see my reports on the reports folder.
According to the article How to fix Reporting Services permissions are insufficient for performing operation (rsAccessDenied):
Make sure you have access configured to the URL http://localhost/reports using the SQL Reporting Services Configuration. To do this:
Open Reporting Services Configuration Manager -> then connect to the report server instance -> then click on Report Manager URL.
In the Report Manager URL page, click the Advanced button -> then in the Multiple Identities for Report Manager, click Add.
In the Add a Report Manager HTTP URL popup box, select Host Header and type in: localhost
Click OK to save your changes.
Now start/ run Internet Explorer using Run as Administrator.
NOTE: If you don't see the 'Site Settings' link in the top left corner while at http://localhost/reports it is probably because you aren't running IE as an Administrator or you haven't assigned your computer's 'domain\username' to the reporting services roles, see how to do this in the next few steps.
Then go to: http://localhost/reports (you may have to login with your Computer's username and password)
You should now be directed to the Home page of SQL Server Reporting Services here: http://localhost/Reports/Pages/Folder.aspx
From the Home page, click the Properties tab, then click New Role Assignment
In the Group or user name textbox, add the 'domain\username' which was in the error message
*(in my case, I added: DOUGDELL3-PC\DOUGDELL3 for the 'domain\username', in your case you can find the domain\username for your computer in the rsAccessDenied error message).
Now check all the checkboxes; Browser, Content Manager, My Reports, Publisher, Report Builder, and then click OK.
Your domain\username should now be assigned to the Roles that will give you access to deploy your reports to the Report Server. If you're using Visual Studio or SQL Server Business Intelligence Development Studio to deploy your reports to your local reports server, you should now be able to.
I encountered this same issue, but the resolution was different.
looking at http://localhost/Reports/Pages/Folder.aspx and I had to 'edit item security' to get the parent permissions to apply to the child folders and items (reports).
When I manually tried to upload using the "Upload File" function, it became clear.
(! Replacing an item with another one that has the same name, but is a different type, is not allowed.)
It seems the folders where the report is stored did not allow overwriting. I applied the parent folder permissions over the reports folder and we were able to deploy using Visual Studio again. Not sure how it got into this state.