java.lang.ClassCastException: weblogic.xml.jaxp.RegistryDocumentBuilderFactory cannot be cast to oracle.xml.jaxp.JXDocumentBuilderFactory
weblogic is still using its own class,i have tried every method,modify the weblogic.xml and weblogic-application.xml and add args to the startWebLogic.cmd -Djavax.xml.parsers.DocumentBuilderFactory=org.apache.xerces.jaxp.DocumentBuilderFactoryImpl
all above is not to work!!!
who knows the method,please help me !
yeah，I have solved it.
find startWebLogic.cmd in the directory bin
find the "set CLASSPATH"
modify it to be this:
set PRE_CLASSPATH=%WL_HOME%\server\lib\xerces.jar
set CLASSPATH=%PRE_CLASSPATH%;%SAVE_CLASSPATH%
just this,let your jar is
Try removing xml-apis.jar from the classpath.
Sol to similar problem : http://forum.springsource.org/showthread.php?22597-java-lang-ClassCastException-weblogic-xml-jaxp-RegistryDocumentBuilderFactory
Related
I tried installing powerline for bash linux. It was working fine with all the changes for git etc..
By mistake I typed powerline-daemon --replace and from then I started getting this error,
Expecting ',' delimiter: line 13 column 6 (char 147).
Any clue what could be the issue. I did check all the json files for the , delimiters, wherever I added the git related codes but unable to find any the reason. I tried doing the below command but the results are same.
powerline-daemon k and then powerline-damen q
Any help/suggestion would be really helpful.
Got it resolved.
Missed , while adding new segments.
Also used // for comments and looks like its not possible in the json.
I'm in a dead end at the configuration of snort.
In theory a simple problem.
I created a test rule to check if snort runs properly.
Location:\etc\snort\rules\local.rules
Content:
alert icmp any any -> $HOME_NET any (msg:"ICMP on fire"; sid:10000001; rev:001;)
Then I ran on terminal :
sudo snort -T -i enp0s3 -c /etc/snort/snort.conf
Message I receive at the end of the initialization:
"Snort successfully validated the configuration!"
"Snort exiting"
But scrolling up I'm seeing:
Initializing rule chains...
0 Snort rules read
0 detection rules
0 decoder rules
0 preprocessor rules
0 Option Chains linked into 0 Chain Headers
No rules at all!
location is correct in conf file under
/etc/snort/snort.conf
var RULE_PATH /etc/snort/rules
Snort 2.9.17 Build 199
Ubuntu 20.04
Any ideas?Thnnks in advance!
I would recommend supplying the rule path when you execute Snort using the "--rule-path" flag.
The --rule-path flag is not available and not recognized.
As far I understand this variable is just that, a variable that's not used anywhere in the configuration file.
The only way/workaround that I found was include the rule files for ex.
In the snort.conf appending this.
.
.
.
.
include c:\local.rules
Besides that, someone found a way to match content in answer/response?
I mean, let suppose that I want to check if the server has answer with a known content, for ex: success. I've tried with bidirectional operator <> and flow:to_client but nothing has worked.
I have got the following .erlang file in my home directory (Ubuntu):
io:format("executing user profile in home/user/.erlang\n",[]).
code:add_pathz("/media/user/Disk2/Cloud/Workspace/Erlang").
code:add_pathz("/media/user/Disk2/Cloud/Workspace/Erlang/code").
shell_default:cd("/media/user/Disk2/Cloud/Workspace/Erlang").
io:format(".erlang rc finished\n",[]).
I can see that the file is run when I start the Erlang shell in the terminal. What is more, the shell_default:cd-command works fine. However, the code:add_pathz-commands do not. When I try to run anything in the code-directory, I get an "undefined function"-error. Besides, when I list the paths with "code:get_path().", I get:
[".","/usr/lib/erlang/lib/kernel-2.16.4/ebin",
"/usr/lib/erlang/lib/stdlib-1.19.4/ebin",
"/usr/lib/erlang/lib/xmerl-1.3.5/ebin",
"/usr/lib/erlang/lib/wx-1.1.1",
"/usr/lib/erlang/lib/webtool-0.8.9.2/ebin",
"/usr/lib/erlang/lib/typer-0.9.5/ebin",
"/usr/lib/erlang/lib/tv-2.1.4.10/ebin",
"/usr/lib/erlang/lib/tools-2.6.13/ebin",
"/usr/lib/erlang/lib/toolbar-1.4.2.3/ebin",
"/usr/lib/erlang/lib/test_server-3.6.4/ebin",
"/usr/lib/erlang/lib/syntax_tools-1.6.12/ebin",
"/usr/lib/erlang/lib/ssl-5.3.2/ebin",
"/usr/lib/erlang/lib/ssh-3.0/ebin",
"/usr/lib/erlang/lib/snmp-4.25/ebin",
"/usr/lib/erlang/lib/sasl-2.3.4/ebin",
"/usr/lib/erlang/lib/runtime_tools-1.8.13/ebin",
"/usr/lib/erlang/lib/reltool-0.6.4.1/ebin",
"/usr/lib/erlang/lib/public_key-0.21/ebin",
"/usr/lib/erlang/lib/pman-2.7.1.4/ebin",
"/usr/lib/erlang/lib/percept-0.8.8.2/ebin",
"/usr/lib/erlang/lib/parsetools-2.0.10/ebin",
"/usr/lib/erlang/lib/otp_mibs-1.0.8/ebin",
"/usr/lib/erlang/lib/os_mon-2.2.14/ebin",
"/usr/lib/erlang/lib/orber-3.6.26.1/ebin",
"/usr/lib/erlang/lib/odbc-2.10.18/ebin",
"/usr/lib/erlang/lib/observer-1.3.1.2/ebin",
"/usr/lib/erlang/lib/mnesia-4.11/ebin",
[...]|...]
Why isn't "code:add_pathz" working? Thanks.
Erlang R16B03
Eshell V5.10.4
Ubuntu LTS 14.04
The path above works. The fault was with .beam-files in the code-directory. Recompiling made them accessible from outside the "code"-directory.
Is this currently possible?
This is the contents of my settings.cfg file:
[DEFAULT]
DefaultApplVerID=FIX.5.0SP2
ConnectionType=initiator
ReconnectInterval=60
FileStorePath=store
FileLogPath=*store
HttpAcceptPort=8080
HeartBtInt=30
StartTime=00:00:00
EndTime=00:00:00
UseDataDictionary=Y
DataDictionary=quickfix/FIX50SP2.xml
TransportDataDictionary=quickfix/FIXT11.xml
ValidateUserDefinedFields=N
ResetOnLogout=Y
ResetOnLogon=Y
MySQLStoreDatabase=quickfix
MySQLStoreUser=user
MySQLStorePassword=password
MySQLStoreHost=ip address
MySQLLogDatabase=quickfix
MySQLLogUser=user
MySQLLogPassword=password
MySQLLogHost=0.0.0.0
[SESSION]
BeginString=FIXT.1.1
SenderCompID=senderid
TargetCompID=targetid
SocketConnectPort=port
SocketConnectHost=host
Currently it is using the FileStorePath (/store/), but it is ignoring the MySQLStoreDatabase. Should I change these settings, or is the change going to be more complicated than that/impossible?
I'm using python 2.7 and quickfix 1.14.3 (which I installed using pip)
I bet you are constructing your app with a FileStoreFactory.
Gotta use a MySQLStoreFactory.
I'm compiling a deb package and when I run dpkg-buildpackage I get:
dpkg-shlibdeps: error: no dependency information found for /usr/local/lib/libopencv_highgui.so.2.3
...
make: *** [binary-arch] Error 2
This happens because I installed the dependency manually. I know that the problem will be fixed if I install the dependency (or use checkinstall), and I want to generate the package anyway because I'm not interested on dependency checking. I know that I can give to dpkg-shlibdeps the option --ignore-missing-info which prevents a fail if dependency information can't be found. But I don't know how to pass this option to dpkg-shlibdeps since I'm using dpkg-buildpackage and dpkg-buildpackage calls dpkg-shlibdeps...
I have already tried:
sudo dpkg-buildpackage -rfakeroot -d -B
And with:
export DEB_DH_MAKESHLIBS_ARG=--ignore-missing-info
as root.
Any ideas?
use:
override_dh_shlibdeps:
dh_shlibdeps --dpkg-shlibdeps-params=--ignore-missing-info
if your rule file hasn't the dh_shlibdeps call in it. That's usually the case if you've
%:
dh $#
as only rule in it ... in above you must use a tab and not spaces in front of the dh_shlibdeps
If you want it to just ignore that flag, change the debian/rules line from:
dh_shlibdeps
to:
dh_shlibdeps --dpkg-shlibdeps-params=--ignore-missing-info
Yet another way, without modifying build scripts, just creating one file.
You can specify local shlib overrides by creating debian/shlibs.local with the following format: library-name soname-version dependencies
For example, given the following (trimmed) ldd /path/to/binary output
libevent-2.0.so.5 => /usr/lib/libevent-2.0.so.5 (0x00007fc9e47aa000)
libgcrypt.so.20 => /usr/lib/libgcrypt.so.20 (0x00007fc9e4161000)
libpthread.so.0 => /usr/lib/libpthread.so.0 (0x00007fc9e3b1a000)
The contents of debian/shlibs.local would be:
libevent-2.0 5 libevent-2.0
libgcrypt 20 libgcrypt
libpthread 0 libpthread
The "dependencies" list (third column) doesn't need to be 100% accurate - I just use the library name itself again.
Of course this isn't needed in a sane debian system which has this stuff defined in /var/lib/dpkg/info (which can be used as inspiration for these overrides). Mine isn't a sane debian system.
Instead of merely ignoring the error, you might also want to fix the source of the error, which is usually either a missing or an incorrect package.shlibs or package.symbols file in package which contains the shared library triggering the error.
[1] documents how dpkg-shlibdeps uses the package.shlibs resp. package.symbols, files, [2] documents the format of the package.shlibs and package.symbols files.
[1] https://manpages.debian.org/jessie/dpkg-dev/dpkg-shlibdeps.1.en.html
[2] https://www.debian.org/doc/debian-policy/ch-sharedlibs.html
You've just misspelled your export. It should be like this:
export DEB_DH_SHLIBDEPS_ARGS_ALL=--dpkg-shlibdeps-params=--ignore-missing-info
dpkg-buildpackage uses make to process debian/rules. in this process, dpkg-buildpackage it might call dpkg-shlibdeps.
thus, the proper way to pass modify a part of the package building process is to edit debian/rules.
it's hard to give you any more hints, without seeing the actual debian/rules.
Finally I did it in the brute way:
I edited the script /usr/bin/dpkg-shlibdeps, changing this :
my $ignore_missing_info = 0;
to
my $ignore_missing_info = 1;
You can use this:
dh_makeshlibs -a -n
exactly after dh_install