i am new to java fx and i have downloaded Apache Netbeans 9 which runs on java 11.
since java fx is shipped separately, i have downloaded openjfx-11.0.1_SDK and followed steps in this link https://openjfx.io/openjfx-docs/#install-javafx
when i try to create java fx application in apache netbeans , i am getting below error
Failed to automatically set-up a JavaFX Platform.
Please go to Platform Manager, create a non-default Java SE platform, then go to the JavaFX tab,
enable JavaFX and fill in the paths to valid JavaFX SDK and JavaFX Runtime.
Note: JavaFX SDK can be downloaded from JavaFX website
attaching screen shot of netbeans 10.
This is for the future developers that will stumble on this problem. You can follow this video for Installing JavaFX13 and integrate it with Apache Netbeans 11.2. Try following the instructions here
There might be problems with CSS autocomplete but you can create a JavaFx project now.
Edited: As suggested from the other answer, you can download the JavaFX from the official page of JavaFX.
I had the same issue on Netbeans 11. I solved this issue by following below steps.
Download the javafx.zip file from the website and after downloading it put it on JDK folder.
First, click on Manage Platforms and then click on Add platform and after clicking on Add platform it will ask of the filename, so give the path till JDK folder.
After giving path click on next and it will ask for platform name and platform sources so in platform sources give the path till src.zip (jdk/lib/src.zip) and press finish button.
After finishing button, you will see the new platform is added with the same name you have given platform name then click on it and go-to sources and click on Add Jar/Folder button and give the path till javafx.zip file which is saved on JDK folder.
After giving path click on add Jar/folder and close it. After closing it click on JavaFX platform and in that you will see the platform name is there click on it and create the project.
The problem is fixing by jdk1.8. Download and install at the page - https://www.oracle.com/java/technologies/javase/javase-jdk8-downloads.html for your platform. For me, it was "Linux x64 Compressed Archive"(https://download.oracle.com/otn/java/jdk/8u241-b07/1f5b5a70bf22433b84d0e960903adac8/jdk-8u241-linux-x64.tar.gz)
after that:
setting up 1
setting up 2
It may be too late, but I figured it out nonetheless. You, and all other people reading this while trying to figure out how to use JavaFX with any Apache Netbeans version should:
create a new Library, name it JavaFx and in it, put all the .jar files(not the src.zip file) inside the lib directory of the unzipped javafx installation.
create a new normal java project. Go to project properties, and to module path, add the library JavaFx.
create a new module-info.java file (netbeans automates it) in that project and in it, you should put a dependency to all of the JavaFx components, if netbeans didn't already do that (in my case, it did. I didn't even have to hand code a single dependency). And yes, declare the module as "open module".
In essence, I just told you to modularize your project
Before I start writing about the error, I'm running on macOS Sierra and using Xcode 7.3.1.
So I'm creating an Archive from my App, I validate the App and it passes validation, but when uploading to App Store, I get the error "ERROR ITMS - 90167 No. app bundles found in the package".
I've checked all my documentation and I have everything.
I have all my provisioning profiles.
I have Release as "iOS Distribution".
This error just started appearing after I installed macOS Sierra.
Anyone has an idea of why I'm getting this error?
After chatting with folks at WWDC in both the Xcode lab and the App Store lab, they were able to dig up information that this is a known issue in the current Sierra seed that is fixed in the next release. You can either revert, or wait. Not the most satisfying answer, I admit.
Problem:
Issue with the current macOS Sierra build.
Workaround
Build with Xcode 7.3.1 then upload using Xcode 8 [Beta]. (Thanks to #JollyRoger)
Currently, this workaround ONLY works for TestFlight and NOT for App Store submissions.
No need for fix [UPDATE]
So it seems that this bug has lasted for the whole beta period and it might not be worth for Apple to fix it anymore as the final version of iOS 10.0 is releasing in a few days and the final macOS Sierra is releasing a few days after that.
If you are still getting this issue with the final build of macOS Sierra, make sure you are using Xcode 8.x and not anything earlier than that.
Possible errors:
ERROR ITMS-90635
ERROR ITMS-90635: "Invalid Mach-O Format. The Mach-O in bundle
"....framework" isn’t consistent with the Mach-O in the main bundle.
The main bundle Mach-O contains armv7(machine code) and arm64(machine
code), while the nested bundle Mach-O contains armv7(bitcode) and
arm64(bitcode). Verify that all of the targets for a platform have a
consistent value for the ENABLE_BITCODE build setting."
Fix: Uncheck the Include Bitcode option before uploading.
INFO ITMS-90111
INFO ITMS-90111: "Beta Toolchain. This app has been built using beta toolchains. Apps built with beta toolchains are acceptable for TestFlight submission. Note that you will not be able to submit these builds for sale on the App Store."
Note: This will allow you to upload the build and use it for TestFlight but when trying to submit to the store you will be faced with this error message:
New apps and app updates must be built with the public (GM) versions of Xcode 6 or later, OS X, and tvOS SDK. Don't submit apps built with beta software including beta OS X builds.
If you are uploading from Xcode7(less than Xcode8) and macOS Sierra(V10.12), So this issue "ERROR ITMS-90167: "No .app bundles found in the package"" will come and will not allow to upload build to AppStore.
So use "Application Loader V3.6" or "Xcode8" to upload the build.
Try This, it worked like a charm for me,
We also facing same issues at time of updated macOS Sierra.
At time of upload build by using Xcode7.3.1 we get an error message
"ERROR ITMS-90167:"No.app bundles found in the package"
To Solve Error And Upload IPA file On App Store Follow Below Steps
We export build by using Xcode7.3.1.
-For upload build we use Application Loader V3.6 of Xcode8.
Xcode -> Open Developer Tools -> Application Loader
Follow Below Steps
1) Open Application Loader
2) Choose Build(IPA)
3)Uploading IPA file To app store
4)Successfully Submit Build(IPA)To App store
Your App will uploaded on Appstore,
Hope this is help for some one.
I would first like to thank #xemacobra for his solution, it worked for me until I needed to submit an application for Review.
If you need to submit an application for the App Store, and the build says You may not submit builds using beta software... here is the solution:
The problem is Xcode is sending the build information along with the version of you Mac OS. To fix that, you just need to change your Mac OS build to an older, acceptable, version.
Restart your Mac and hold Command + R on boot up
Open Terminal
Run csrutil disable
Restart your Mac.
In Finder, go to /System/Library/CoreServices/SystemVersion.plist
Open the file so that you may edit the SystemVersion.plist
Find <key>ProductBuildVersion</key> and locate the string attached to this key. For example, mine was 16A254g.
Change this string to a version of Mac OS that is currently supported for public release. At the time of this solution this one will fine: 15G31
Restart Xcode. Re-Archive your application. Re-Submit the application.
I did not try submitting the application through Xcode 7.3.1, but I do know this still works if you submit the .ipa through Xcode 8 beta 3.
Once you have submitted your build, revert the SystemVersion.plist to the original string, and repeat steps 1-4 replacing csrutil disable with csrutil enable.
I have also experienced the same. This is the simple way to solve your problem. Archive your app using Xcode 7.3.1 and export the ipa file of your app into a directory by selecting the option Save for iOS App Store deployment.
After that open Xcode 8.0 and open Application Loader from Xcode -> Developer Tools. Sign in to your team, and upload the ipa file using Xcode 8.0.
I have uploaded two apps to iTunesConnect, it will work for sure.
I was having this issue with Xcode 8 GM and trying to submit an app for release though Application Loader.
You have to use the version of Application Loader that comes with Xcode 8, which should be 3.6
I still have Xcode 7 installed, and was using Application Loader 3.5
Update
My apps submit okay now and go into processing, then soon after disappear completely. I think this might be a separate issue though.
Update 2
You still can't use Sierra to submit your apps. At least not until they release the GM.
Update 3
This issue is still occurring with this particular project. All other new ones (sticker apps) that I have created since public launch have been submitted to iTunes Connect with no issues.
I worked on this project during the betas, so it's possible something has been corrupted along the way and is causing issues. Might require starting a new project in Xcode 8.
There's a thread on the developer forums addressing this issue. https://forums.developer.apple.com/thread/62703
Solution
Turns out the fix for us was to add the "NSCameraUsageDescription" key
to the info.plist with a description of what the camera does in the
app.
Not sure if that solution will help in all cases though.
I submit an app built using LibGDX and had the same issue after upgrading to Sierra. I solved it by:
Upgrading Xcode (8.x), as explained above
Use the latest version of appLoader (3.6). To do that, use the AppLoader available within Xcode. I was using a standalone version of the appLoader: that's incorrect. Open Xcode and go to Xcode->Open Developer Tool->Application Loader
Unable to process application at this time due to the following error: No .app bundles found in the package. This issues appear when your pc's space is less. So clear you trash or some useless document from you pc. Then let's try again! It's work for me!
I recently upgraded to macOS Sierra and also received this error message. After uploading through the application loader failed.I downloaded Xcode 8 (kept my 7.3.1 copy). Closed Xcode 7.3.1. Opened Xcode 8-> Organizer-> proceeded to validate and upload my build. It worked. Hope this helps someone in a similar situation.
Maybe it's about your disk space check your disk space.
Try open App Loader from Xcode8.
Xcode > Open Developer Tools > Application Loader
Then you can upload app to TestFlight without the error.
These are all fabulous answers above... follow Nicholas's 9 step process above and also Tobeiosdev if you don't have write access to the SystemVersion.plist file.
However be very careful about how you read the step by step guide. DO NOT do as I did and restart your device after editing that plist file, as you will render most applications on your mac useless, including Terminal & TextEdit (which are required to edit it back). Reopen terminal inside Sierra (or the beta OS you are running) not inside the command line.
I unfortunately found out the hard way and then could not edit the plist file again in the command line. So I then had to reboot several times before finding the solution which was to go into single user mode (Command-S on restart), all of which scared me senseless that I had ruined the build of my mac. Eventually got everything running again but was somewhat delayed too by having to reinstall Xcode 8... leading to a sleepless night as my first ever submission to the AppStore.
All in all, the above is a perfect solution that works all around, IF you follow the directions correctly. Lesson learnt!
I accidentally opened an old version of the Application Loader Version 3.5 (921) and got the error ITMS-90167 no app bundles found. Be sure you open the Application Loader over the menu of Xcode (Xcode->Open Developer Tool). Version 3.6 (1020) works like a charm! :)
I solved this problem as follows, find your archive in the Organizer, and then:
Show in finder
Show package contents
In the „Wasabi.xcarchive“ file, find the
„Products“-„Applications“-„Wasabi.app“(Wasabi is your app’s name),
„Show package contents“ again
Finally, you can see there has a file named“Info.plist“, open it
Edit the value with a key named „BuildMachineOSBuild“, I just change
it to „15F34″(it’s „El Capitan 10.11.5“ ’s version)
According to #Fan Zhang answer follow these steps and you can upload this archive use Xcode or Application Loader, whatever you want!
When you archived your app, find your archive in the Organizer, and then:
-->"Show in finder";
-->"Show package contents";
-->In the "xx.xcarchive" file, find the "Products"->"Applications"->"xx.app"(xx is your app's name), "Show package contents" again;
-->Finally, you can see there has a file named"Info.plist", open it;
Edit the value with a key named "BuildMachineOSBuild", I just change it to "15F34"(it's "EI Capitan 10.11.5" 's version);
With me, my application writing by Swift 2.2. And must use Xcode 7.3.1 to archive and upload to Apple testflight but got the same error(I run on macOS Sierra-10.12). The follow solution fix it for me, hope another who face the same problem can find somethings helpful:
1> Use Xcode 7.3.1 to archive
2> Export to file .ipa
3> Quit Xcode 7.3.1 then open Xcode 8, and then open Application Loader, use Application Loader to upload file .ipa to itunes connect.
In case this helps, I had the same error code "ERROR ITMS - 90167 No. app bundles found in the package" using mac OS 10.14.4 with Xcode 10.2.
(As a note, I was able to successfully submit builds some weeks ago with the same configuration, but this seems to be something in the iTunes Connect side)
Had to update to mac os 10.14.6 and Xcode 10.3 to successfully submit my build.
I faced the same problem .
what worked for me was ->
go to target-> signing & capabilities -> signing certificate -> I had to revoke one certificate. Always revoke the Certificate by the name of admin's iMac .
It is created by default while making your certification and profiles.
**Picture is attached for the reference.
PS:- always make sure the bundle id is same on App store connect and Xcode before archiving.
The privacy settings are changed for iOS 10, more on this could be read here
I had previous described issues, which had to be solved as described, but after successful upload application wasn't visible on iTunes connect.
I had to add Privacy - Bluetooth Peripheral Usage Description key in a plist in order to solve the last one.
Other missing keys will make the same problem.
I was getting this error with Xcode 7.2.1 and Application Loader 3.4 on macOS 10.12.1.
But for some reason, it worked if I used the command-line "altool" to do the upload instead:
'/Applications/Xcode-7.2.1.app/Contents/Applications/Application Loader.app/Contents/Frameworks/ITunesSoftwareService.framework/Versions/A/Support/altool' \
--upload-app -f your-app.ipa \
-u your-apple-id -p your-apple-id-password \
--output-format xml
I had to provide missing application name in order to fix this problem.
Go inside your Appstore and download the new version of Transporter.
this worked for me
I'm trying to use the sqlite-winrt library at https://sqlwinrt.codeplex.com (cf. http://blogs.windows.com/windows_phone/b/wpdev/archive/2013/05/30/sqlite-winrt-wrapper-for-windows-phone.aspx) because I need to access an SQLite database via SQL commands in a WinRT 8.1 and a WP8 app and this library seems the only available option.
Anyway, there is no binary release and if I try compiling the source I get several link errors for unresolved externals against the SQLite DLL. I posted an issue at codeplex but got no reply yet, so I was wondering if anyone had already managed to successfully compile this lib and how (or if you know of any viable alternative for RT8.1 and WP8). Here is what I did:
downloaded the latest source from the site.
downloaded and installed 2 VSIX from http://www.sqlite.org/download.html: sqlite-winrt81-3080002.vsix for RT 8.1 and sqlite-wp80-winrt-3080100.vsix for WP.
executed the powershell scripts in each subfolder of the source code solution, which are required to update the projects with newer releases of the SQLite for WinRT extension. The current versions of the scripts refer to SQLite for WinRT 8.1 (prerelease) which is the same I downloaded above.
opened the VS2013 solution and removed the RT project (I just need RT8.1 and WP, this was for WinRT 8.0).
5) built the solution, which failed with link errors.
If I see the RT8.1 project properties, I can confirm the reference to SQLite is under C:\Program Files (x86)\Microsoft SDKs\Windows\v8.1\ExtensionSDKs\SQLite.WinRT81\3.8.0.2.
Did anyone manage to use this lib? Thanks!
I also once had that problem. I fix it by editing the project file manually. At that time, the powershell script updating the wrong path. That's why I always failed when compiling my project. After I edit the project file using external text editor (I use sublime text), the projects are linked correctly.
You can try DatabasesCx. It is another SQLite Wrapper using Windows Runtime Component technology. It is freeware distributed as precompiled binary. You can find the details at http://www.almanacsoft.com/databasescx
I have a native dll that I'd like to use in a WP8 project that I'm working on. I've done some research and have created a C++ Windows Runtime Component (WRC) to wrap the native DLL. The WRC project uses a .lib file, and my WP8 application calls the WRC project.
My solution compiles all fine, but when my application makes a call to a method in the native DLL, I get a The specified module could not be found. (Exception from HRESULT: 0x8007007E) exception.
From reading around it seems like the dll is not being loaded. I've copied all relevant dlls to the output dir of where the .exe file is and also in various places but the error keeps showing up.
If anyone could point me in the right direction I'd be very grateful. Also if more info is required I'll post that up also.
The DLL must be included in your XAP package. Something you can see being taken care of in the Output window when you build your app, it starts with the "Begin Xap packaging" messages and then lists all the files that get added. The runtime error says it is not being included.
There is remarkably little guidance on how to ensure that a file gets included in a phone package when MSBuild cannot figure out the dependencies by itself. It certainly won't for your DLL, no way the build system can tell if it isn't a project in your solution. Seems you're operating a bit on the bleeding edge in this case :)
But this works well when I try it, going by the MSBuild output and not by actually testing it: Project + Add Existing Item. Navigate to your DLL and select it. Select it in the Solution Explorer window and look in the Properties window. Ensure that "Build Action" = Content, Copy to Output Directory = "Copy if newer". Rebuild, you'll now see the file getting added to the XAP. Which should solve this particular error. There might be others :)
Windows Desktop or Windows Store native DLLs are not binary compatible with Windows Phone, even if they are built for the same CPU architecture.
Therefore you will need to recompile your native DLL for the Windows Phone toolset.
About Windows Runtime Components:
On Windows Phone a Windows Runtime Component is itself a native DLL (.NET is not supported on the phone). The binaries of Windows Runtime Components cannot be shared between Windows Store apps and Windows Phone apps.
I have opened a project in netbeans to view the project but there is a same error in most of the files. It says that "package javax.ejb does not exist". This is a working project and I am not sure what is wrong. Can anyone help me?
Try this first: http://forums.netbeans.org/topic44810.html
If that doesn't fix your problem, you can right click on your project and go to the properties section. Click on the Libraries section and select "Add Library". Then scroll down until you find the Libraries that start with "Java" (for example: Java EE 6 API Library). I add all of the Java libraries to my project to resolve this issue, however you might add them one at a time and see which one resolves it.
you just need to import Java EE Web 6 API Library to fix this issue, these libraries must be imported under the libraries folder:
right click Add library, click on import library, scroll down and look for Java EE Web 6 API Library, click on import library and finally click on add library.
That should fix any issues
In my case I was working with java with ant java web app, i was also using Java EE Version Java EE 6 web
I had the same problem when I tried to open a Java web service application and managed to resolve it after trying out a few things. For a Java web service application, there can be multiple causes to the problem. You may have "EJB and EAR" plugin already installed, however, Netbeans may not know the web server to use to run your application. It may have complained that "One or more projects do not have the target server set properly" when the project was opened. To resolve this problem, you have to assign a web server for the project. This is to be done not only for the main project, but also for the required projects that the main project may be dependent upon.
You first need to ensure that you have opened not just the main project, but also the required projects. To open the required projects, right-click on the main projects name in the main projects window and select Open Required Projects -> Open All Projects. After opening, the project names may be colored red in the project window to indicate problem.
In order to use a web server, you need to have one already installed. I chose Glassfish. Download and install Glassfish from https://glassfish.java.net/download.html, if you haven't done so. Also install the "Glassfish Server" plugin for Netbeans, if it's not already installed.
Now, in the Netbeans project window, right-click on the main project name and select "Resolve missing solver issue". If you see "Glassfish server" in the pop-up window that appears, select that one and click ok. If you don't see it, click "Add Server" then select "Glassfish Server", and setup the Glassfish server. Here you need to provide the installation directory of your Glassfish server, but I simply used the default values for the rest. Later I used username "admin" with blank password for running the project. Also perform the same steps to resolve the missing server for all of the required projects.