I have installed WampServer Version 2.5 on my computer. I have been trying to set the MySQL root password using command prompt but it will not recognize my commands.
When I type the following:
mysqladmin -u root status
I get the following error:
'mysqladmin' is not recognized as an internal or external command, operable program or batch file.
I was following online directions, in order to add the MySQL command prompt in WampServer to my Windows system path, and I think I did it right.
I also did a command line search for the 'mysqld.exe' file using
'dir mysqld.exe /s /p'
and I did not get any directory path.
You should navigate in command prompt to the folder where is mysqladmin file. Try to find it with Find interface in Windows. Then try to mysqladmin -u root status or whatever you need.
Then you can add it's path to system variables, so it could be reached from every folder in command prompt.
You can add a password to the root through mysqladmin.exe.
This executable is usually inside <wamp path>\bin\mysql\mysqlx.x.x\bin
Call the executable with the following parameters.
mysqladmin -u root password rootpassword
I managed to download the MySQL DMG archive to my OS (mac OS X). It works if I use the command line.
Now, I'm trying to install MySQL Workbench.
I've created MySQL Connection but once I'm testing the host machine settings, I get:
Checking command 'ps xa | grep "/usr/local/mysql.*/bin/[m]ysqld"'
Server detected as running
Check if /etc/my.cnf can be accessed
Operation failed: File /etc/my.cnf doesn't exist
I'm trying to find the file my.cnf and I get:
Didis-MacBook:~ Didi$ find . -type f -name "*my.cnf*"
find: ./perms/newdir: Permission denied
So I tried to create my own "my.cnf" by entering:
cd /usr/local/mysql/support-files/
sudo cp my-huge.cnf /etc/my.cnf
Then it asked for a password. I don't remember setting up a password.
So I typed:
/usr/local/psa/bin/admin --show-password
and get:
-bash: /usr/local/psa/bin/admin: No such file or directory.
I believe my password should be in /etc/passwd but I have no dir "etc" in my system!
I'm running out of ideas, can somebody help me please?
I figured it out:
Went to my terminal and typed:
passwd
Old password was blank
I created a new password (it was THAT simple)
I created a "etc" directory
I checked the files under /usr/local/mysql/support-files/ and saw my cnf file was actually named my-default.cnf and not my-huge.cnf like the developer at the MySQL site.
So I typed: sudo cp my-default.cnf /etc/my.cnf
went back to the Workbench and it FINALLY said:
Testing host machine settings is done.
The MySQL Server installation on OS X does not include a cnf file, so it is normal that you get the warning. Nonetheless you can continue creating the connection without problems (ignore the warning). When you start MySQL Workbench afterwards and try to manage the configuration of the server, you will get another warning, but you can continue and MySQL Workbench creates the cnf file for you. No need to do all that manually.
I met this problem too. I just clicked the continue button until i was at "Review remote management settings" step, and stop here click "change parameters", then continue. At "Path to configuration file" choose the path point to my-default.cnf. Then check path, it works
I installed MySQL on Microsoft Windows 8 Using a noinstall Zip Archive. But when I tested by executing the following commands on windows prompt, the above error showed up.
C:\> "C:\MySQL\bin\mysqlshow"
C:\> "C:\MySQL\bin\mysql" test
You don't need to restart your windows. The easiest way to achieve this is
Go to <Extracted folder location>/bin/
Run mysqld (service)
close the cmd prompt
Run mysql.exe or the better way to do is add the location to PATH environment Variable
Go to Run type services.msc. Check whether MySQL services is running or not. If not, start it manually. Once it started, type mysqlshow to test the service.
Go to bin directory copy the path and set it as a environment variable.
Run the command prompt as admin and cd to bin directory.
Run command : mysqld –install
Now the services are successfully installed
Start the service in service windows of os
Type mysql and go
Though it is an old question, I am adding my answer in it, because the solution that worked for me on Windows 7 as an admin user, is missing in the answers' list. Though my solution is for installed MySQL, I am putting it for those who search for a solution for this error message. Here it is:
Click on the Windows 7 start button and type taskmgr in the search bar
Right click on the taskmgr program icon and select Run as administrator
In the Task Manager window, go to the Services tab
Right click on the MySQL service and click Start Service
The solution that worked for me is:
Downloaded mysql-8.0.22-winx64.zip file
Extracted the zip file
Moved the extracted folder to C:/Program Files
Opened cmd.exe as admin
Navigated to the directory cd C:\Program Files\mysql-8.0.22\mysql-8.0.22-winx64\bin
mysqld -install (Service successfully installed)
mysqld --initialize (no prompt)
Opened services.msc
Found MySQL
Right-click and start
I was stuck on this same issue for what felt like an eternity.
My problem was: I was running mysql from MAMP on port 8889, but when trying to connect to mysql from my command line, it was expecting port 3306. I was running out of ideas, so I tried:
mysql --port 8889
and happiness ensued:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 2
Server version: 5.6.34-log MySQL Community Server (GPL)
Go to Run type services.msc. Check whether MySQL services is running or not. If not, start it manually.
Run your cmd as administrator.
What you will see is like this:
c:\windows\system32>
Go to your bin location by using cd..
like C:\mysql\bin (my location of bin in my computer is what you are seeing so chose yours correctly)
Run:
$ C:\mysql\bin>mysql --install
Service successfully installed.
Then run:
$ C:\mysql\bin>NET START MySql
The MySql service is starting
The MySql service was started successfully
Then the last step is running:
C:\mysql\bin>mysql -u root - p admin
It will ask for password don't enter anything first time
because it will use blank, and just press enter you are done.
And later you can set password too.
I have a windows 8.1 machine and mysql was not running at all even after trying to start mysqld with no error logs. This solution worked for me:
start cmd in admin mode
type in "net start mysql"
close current cmd window and open new cmd window
type in "mysql"
The mysqld service should now be available.
Had this issue in Windows 10 and MySQL 8. Resolved by following steps:
Searchbar(bottom left) > Task Manager > Run as administrator > Services > MySQL80
Well that could have some reasons.
THe first one is that the MySQL server/service not started.
If he is started you should check out the logfiles, and make sure there are no problems.
You could also uninstall the MySQL service and install XAMPP.
With XAMPP it is easier to manage this services.
Despite that my server was running, I had the same problem.
I found out that it was the port. So you need to specify the port:
mysql -u user -p --port 0000
The port on your machine may be different. To find out on which port mysql is running open the mysql ini file and look for port=. A port often used is 3306.
Example how to log on to mysql
mysql -u root -p --port 3306
Test if the server is running. You can use netstat for this. See https://serverfault.com/questions/260239/unable-to-connect-to-mysql-through-port-3306
If it is running, it may be the firewall. You can turn that off to test if that is the problem.
See the following manual to install Mysql as a service: https://dev.mysql.com/doc/refman/5.5/en/windows-start-service.html
First of all, you need to ensure the port number on which the server is running. Then you can run
mysql -u username -p --port portNumber
on the command line
Executing the mysqld command can solve your problem.
My SQL version is 5.7.
If you're using the no install zip, you need to execute mysqld.exe first to start the service, and then execute mysql.exe to open your connection.
The no install is nice, but if you intend to do any serious work with MySQL, you may want to consider either using the MSI to do a proper installation, or if you're doing web development work give XAMPP a try.
Check Mysqld.exe file is in your bin folder. if it is not there , just copy that file from any other computer and paste it on your bin folder.Just double click. Then run mysql.its solved
This error is flashed when we are trying to open mysql with out stating the service.
Open cmd prompt
to start the service type
mysqld --console
This will start the mysql service
Don't close this cmd prompt and open a new cmd prompt and
type
mysql -u root -p
Then enter ur password
Make sure your mysql is running in default port (3306) , if you are running mysql with different port (for example: 3307), you must specified the port number while connecting to the server.
If your port is different than default port, then try with this command.
mysql -u <username> -p --port<port number>
For eg:
mysql -u root -p --port 3307
Go and search Services in Windows
Now search Mysql. Right Click on it. By Default it's startup type will be 'Automatic'. Click on Properties on right clicked menu.
You will find startup type Switch it to -> Manual So that We can start and stop by our choice.
Now Get Back and Right Click to Mysql on Services and Click Start.
Now Mysql has started successfully
To get started
Start Mysql Shell
& type command
shell.connect({host: 'localhost',user: 'root'})
Now type password
To type sql commands:-
/sql
I had the same problem. I tried all of the answers above (and some from other websites). In the end, my issue was that my cache wasn't configured. I found that info in my error log and fixed it by changing the line in the file:
C:\MAMP\bin\apache\conf\extra\http-ssl.conf
There I removed the double quotes from the line:
SSLSessionCache "shmcb:/some/example/path/ssl_scache(512000)"
to:
SSLSessionCache shmcb:/some/example/path/ssl_scache(512000)
and saved with Ctrl+S and closed the file.
Here's the link that helped me:
https://wiki.apache.org/httpd/SSLSessionCache
I faced the same problem couple of times and each time the reason was different:
The solution that worked first time was that by "Abhishek Oza" which is same as that of "amey91" (see above)
The second time, my server was on a different port number than the default one(3036),so i was not able to connect.So I had to specify
the port number explicitly for making the connection which you can do
simply by writing: "mysql --host=127.0.0.1 --port=8081(specify your
port number here) mysql -u root -p"
In my case, which was a manual install using the .zip file.
I solved this by specifying the nonstandard MySQL and Data install locations in a my.ini.
https://dev.mysql.com/doc/refman/8.0/en/windows-create-option-file.html
Then I needed to run the data directory initialisation commands:
https://dev.mysql.com/doc/refman/8.0/en/data-directory-initialization-mysqld.html
Then running:
net start mysql
There is a possibility that your installation of MYSQL got corrupted. The best thing you can do is to search for MYSQL INSTALLER on your system and then run it again.
It will not download the mysql server again, it will just help you to set it up.
After that, edit your environment variables path and add the bin folder of your mysql to it.
By now, it should work.
In my case I have 2 different version of mysql in Windows OS and I solved the my problem by bottom step:
first stop all mysql service.
I create one config file in C:\mysqldata.cnf with bottom data(my mysql is in "C:/mysql-5.0.96-winx64" directory ):
[mysqld]
datadir = C:/mysql-5.0.96-winx64/data
port = 3307
then I run bottom command in cmd:
C:\mysql-5.0.96-winx64\bin\mysqld --defaults-file=C:\mysqldata.cnf --console
above step reference
then I create txt file in C:\resetpass.txt with bottom data:
UPDATE mysql.user SET password=PASSWORD('ttt') WHERE user='root';
then run mysqld with bottom command:
C:\mysql-5.0.96-winx64\bin\mysqld --init-file=C:\resetpass.txt --install mysql2 --console
net start mysql2
after these step you have one mysql service(with name mysql2) than run with port 3307.
I have 2 version of mysql with different user management tables(in version 5.0.96 user table difference with 5.5 version because of that I must be change table folder in first step)
you can run other mysql service with other port now(and you can run this steps with different datadir, service name and port for it again)
First make sure you have installed MYsql+Sqlyog(if you are using it.).
Start Registry Editor (Regedt32.exe).
Locate the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
On the Edit menu, click Add Value, and then add the following registry value:
Value Name: MaxUserPort
Data Type: REG_DWORD
Value: 65534
This sets the number of ephemeral ports available to any user. The valid range is
between 5000 and 65534 (decimal). The default value is 0x1388 (5000 decimal).
On the Edit menu, click Add Value, and then add the following registry value:
Value Name: TcpTimedWaitDelay
Data Type: REG_DWORD
Value: 30
This sets the number of seconds to hold a TCP port connection in TIME_WAIT state before
closing. The valid range is between 30 and 300 decimal, although you may wish to check
with Microsoft for the latest permitted values. The default value is 0x78 (120 decimal).
Quit Registry Editor.
Reboot the machine.
I will advise to use first check if my.ini exist in mysql folder in c drive or in windows folder
mysqld -install (Service successfully installed)
mysqld --initialize (no prompt)
Also another advise is not to use mysql 8, since it is not compatible with wordpress or any other opensource yet, there are lot of changes between version 5 and version 8, so if you are using mysql please use version 5.x.
Steps to resolve the problem ->
Go to command prompt and at root of c (c:\ if environment variable-path is set)
type -> c:\>mysqld -install.
Then type -> c:\mysqld --initialize
Now create one .txt file (here in our example we are taking init.txt) at root of mysql(may vary according to your directory) ->c:\MySQL\init.txt.
Now open that .txt file(init.txt) and write in it ->
5.open Run console and write -> Services.msc
6.Then Services window will be open ,there select MYSQL,Double click It and press start
7.Finally open new Command prompt window and type at root of c (c:) ->c:\>mysqlsh
due to this shell will execute and here you are ready to go....
mysql -u root --port 3308
this one help me
port number from phpmyadmin default port is 3306
Hi I have installed MySQL from oracle website, but did not get a "MySQL Command Line" option under MySQL in Programs menu.
So I looked up on this site how to execute sql queries from DOS command prompt.
I found an answer on this site that advised to type in something like: sql root u- p- etc. but this does not work.
Can anyone advise me the syntax to use to go into sql from DOS, or direct me to the answer described above (I cannot locate it)
I use Windows 7 and downloaded the ODBC driver, too.
Many thanks.
Unless MySQL's bin directory is in your PATH variable, you will need to either be in the directory, or write an absolute path to it to execute.
Try something like this (depending on your installation):
cd "C:\Program Files\MySQL\MySQL Server 5.5\bin"
mysql -uroot
Alternatively, you could type this directly:
"C:\Program Files\MySQL\MySQL Server 5.5\bin\mysql.exe" -uroot
cd/
cd wamp
cd bin
cd mysql
cd mysql5.0.51b
#################################
note use your own version of mysql, mine is 5.0.51b
########################################
cd bin
mysql -h localhost -u root -p
////////////////////////////////
note -p that is if u use a password
////////////////////////////////////////
after this line of codes you have this
welcome note telling you the server version of mysql and your connection id
If you navigate to the bin directory of the program you just installed then type "mysql.exe"
Have a look at this guide if you get stuck with the commands
Determine the path of your MySQL installation, and add it to PATH environment variable.
SET PATH=%PATH%;C:\MySQL\bin
The above example assumes MySQL to be installed in C:\MySQL directory.
Once path is set, then you can directly execute
mysql -u root
Which logs into MySQL as root user. The -p flag can be used if password is required
It is required to execute SET PATH every time, hence you may make a batch file.
Whenever I try to start MySQL by typing
> mysql -u root
I get the error
ERROR 2003(HY000): Can't connect to MySQL server on 'localhost' (10061)
How can I solve the problem above? I just downloaded MySQL and unzipped it in the E: drive. I have not done anything else. Do I have to make a connection first? If so, how can I do that?
Here is the ZIP file that I had downloaded: mysql-5.7.15-winx64.zip
Here are the steps to start MYSQL Server (mysql-5.7.15-winx64) for the first time on Windows:
Create a new folder named "data" in MYSQL installation directory (i.e. in the same location as where "bin" directory is located. For me it is: C:\programs\mysql-5.7.15-winx64\mysql-5.7.15-winx64. This location will vary as per the location where you have extracted the MYSQL zip file)
From here I will use my MYSQL folder location as reference. Go to: C:\programs\mysql-5.7.15-winx64\mysql-5.7.15-winx64\bin and execute the command: mysqld --initialize-insecure or mysqld --initialize depending on whether you want the server to generate a random initial password for the 'root'#'localhost' account.
To start the DB, go to: C:\programs\mysql-5.7.15-winx64\mysql-5.7.15-winx64\bin and execute mysqld --console You can see the start-up logs being printed.
To connect to DB, go to: C:\programs\mysql-5.7.15-winx64\mysql-5.7.15-winx64\bin and execute mysql -u root -p. When prompted, Enter password if it has been set or else just hit "Enter" button to connect
The MySQL server can be started manually from the command line. This can be done on any version of Windows.
To start the mysqld server from the command line, you should start a console window (or “DOS window”) and enter this command:
shell> "C:\Program Files\MySQL\MySQL Server 5.0\bin\mysqld"
The path to mysqld may vary depending on the install location of MySQL on your system.
You can stop the MySQL server by executing this command:
shell> "C:\Program Files\MySQL\MySQL Server 5.0\bin\mysqladmin" -u root shutdown
**Note : **
If the MySQL root user account has a password, you need to invoke mysqladmin with the -p option and supply the password when prompted.
This command invokes the MySQL administrative utility mysqladmin to connect to the server and tell it to shut down. The command connects as the MySQL root user, which is the default administrative account in the MySQL grant system. Note that users in the MySQL grant system are wholly independent from any login users under Windows.
If mysqld doesn't start, check the error log to see whether the server wrote any messages there to indicate the cause of the problem. The error log is located in the C:\Program Files\MySQL\MySQL Server 5.0\data directory. It is the file with a suffix of .err. You can also try to start the server as mysqld --console; in this case, you may get some useful information on the screen that may help solve the problem.
The last option is to start mysqld with the --standalone and --debug options. In this case, mysqld writes a log file C:\mysqld.trace that should contain the reason why mysqld doesn't start. See MySQL Internals: Porting to Other Systems.
Via MySQL Official Page
If the command prompt does not work in Windows, try the following:
1) Open services in Windows.
2) Then check the status for Mysql and if you found status nothing or blank then start the mysql service.
3) After then see whether the mysql is start or not .If it shows started then try to check mysql working.
It has worked for me when cmd commands were not working.
Run the command prompt as admin and cd to bin directory of MySQL
Generally it is (C:\Program Files\MySQL\mysql-5.6.36-winx64\bin)
Run command : mysqld --install. (This command will install MySQL services and if services already installed it will prompt.)
Run below commands to start and stop server
To start : net start mysql
To stop : net stop mysql
Run mysql command.
Enjoy !!
maybe
E:\mysql-5.1.39-win32\bin>mysql -u root -p
Type
C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld" --console
to start the sql server and then test the client connection.
I was using MySQL Server 5.5 as a result I was missing the folder which majority of the answers made mention of in the bin folder. What I did instead was the following:
Open Explorer and make your way to C:\Program Files\MySQL\MySQL Server 5.5\bin or your MySQL installation directory.
Run the executable application MySQLInstanceConfig and follow the images below.
This solved my issue and I was able to access the database without any errors.
Start mysql server by command prompt
C:> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --console
Or alternative reach up to bin then
mysqld --console
It will start your server.
If you have mysql command line client available
click on it
it show enter your password :
Please enter your password.
Then you can access it.
You also need to configure and start the MySQL server. This will probably help
I tried following steps to run mysql server 5.6 on my windows 8.
Run command prompt as an administrator
go mysql server 5.6 installation directory (in my case: C:\Program Files (x86)\MySQL\MySQL Server 5.6\bin) copy that location
In Command prompt run "cd C:\Program Files (x86)\MySQL\MySQL Server 5.6\bin"
run "mysql -u root"
You need to run the server first. The command you use (in the question) starts a client to connect to the server but the server is not there so there the error.
Since I am not a Windows user (Linux comes equipped) so I might not be the best person to tell you how but I can point to you to a guide and another guide that show you how to get MySQL server up and running in Windows.
After you get that running, you can use the command (in the question) to connect it.
NOTE: You may also try http://www.apachefriends.org/en/xampp.html if you plan to use MySQL for web database development.
Hope this helps.
The error complains about localhost rather than permissions and the current practice in MySQL is to have a bind-address specifying localhost only in a configuration file.
So I don't think it's a password problem - except that you say you 'unzipped' MySQL.
Is that enough installation? What did you download?
Was there any installation step which allowed you to define a root password?
And, as NawaMan said, is the server running?
first thing you need to do is to start the mysql
for that you can use
E:\mysql-5.1.39-win32\bin>net start mysql (only when there a mysql running as service)
then you can execute
E:\mysql-5.1.39-win32\bin>mysql -u root
Run your command prompt as administrator.#
We can start MySQL service from windows command line using the below command.
net start mysql
Command to stop MySql service:
net stop mysql
Disable MySql service:
sc config mysql start= disabled
Command to enable MySql service(to automatically start MySQL service when the system starts up):
sc config mysql start= auto
Command to set the startup type to manual:
sc config mysql start= manual
How to restart MySql service?
There is no direct command to restart a service. You can combine stop and start commands like below.
net stop mysql & net start mysql
I was also having problem with starting MySql server but run command as mention right mark in picture . Its working fine .
mysql -u root -p
After entering this command in terminal, it will ask for password
Enter the password and you are ready to go!
there is one of the best solution do resolve this problem and it is going to work 100%.
as we know that server is a process so treat it like a process go to the task manager
in windows and see for services in task manager in that service see for Mysql and MS80 and try to start it manually by click on it and say run then will take some time.
go to your mysql workbench and click on start/shutdown then try to refresh the server status in server status option. it will load up thats it.
1.Open a command prompt as Administrator.
2.Go to MySQL installed bin directory in program files.
3.Copy the location of the bin directory from windows explorer.
4.In command prompt type cd and (paste the location) and do enter.
5.Type mysqld --initialize
6.Open services from the windows menu and sort the list by name.
7.Right-click Mysql and click start.
use the command "mysql -u root -p" in the bin folder path.
and give the MY SQL password which you have set earlier.