SELECT COUNT(*) as totalHappenings FROM `happenings` WHERE `userId` = ?
UNION
SELECT COUNT(*) as xHappenings FROM `happenings` WHERE `userId` = ? AND `destinationObjectType` = \'2\'
UNION
SELECT COUNT(*) as yHappenings FROM `happenings` WHERE `userId` = ? AND `destinationObjectType` = \'1\'
Since it's the same table, and I don't wanna pass through 3 times the userId parameter how can I solve this the best way?
SELECT
COUNT(*) AS totalHappenings,
SUM(CASE WHEN `destinationObjectType` = \'2\' THEN 1 ELSE 0 END) AS xHappenings,
SUM(CASE WHEN `destinationObjectType` = \'1\' THEN 1 ELSE 0 END) AS yHappenings
FROM `happendings`
WHERE `userId` = ?
Result:
totalHappenings xHappenings yHappenings
24 10 14
You can do this with if statements inside select clause:
SELECT
COUNT(userId) as totalHappenings,
SUM(IF(`destinationObjectType`='2',1,0) as xHappenings,
SUM(IF(`destinationObjectType`='1',1,0) as yHappenings
FROM `happenings`
WHERE `userId` = ?
This will surely return your results in 3 columns. Your original query was returning in 3 rows but I think that is not a problem.
try the shortest way:
SELECT COUNT(*) as totalHappenings, SUM(`destinationObjectType` = \'2\') AS xHappenings, SUM(`destinationObjectType` = \'1\') AS yHappenings FROM `happenings` WHERE `userId` = ?
comparision inside SUM returns true or false (1 or 0) so there is no need for IF or CASE statements
Related
I'm doing a select on two tables with this:
SELECT m.torneio, m.deck, m.top, m.lugar, sum( m.quantidade ) AS quantidade, m.formato AS formato, q.quantidade AS qtorneio, t.season AS season, sum( m.top ) AS totaltops, count( m.lugar = '1' ) AS venceu
FROM `metagame` AS m, quantidade AS q, torneios AS t
WHERE m.torneio = t.nome
AND m.torneio = q.nome
GROUP BY m.deck
My problem is that venceu is counting all instances instead of only the ones when lugar = 1. Why is that?
tried with sum() too with no good results too. How can i fix this?
I am surprised that count( m.lugar = '1' ) syntaxs but it does and returns the sames as count(*). You should probably change it to sum(case when lugar = 1 else 0 end) as venceu. You should also look closely at the group by to be sure it works as you expect (i suspect not).
count(x) does not accept an expression.
It's only counting how many times x is returned.
What you should do is check if m.lugar is 1 and yes add one to the counter else do nothing.
Inline checks can be done like so:
case when m.lugar = '1' then 1 else 0 end
Then add all the one you gets :
sum(case when m.lugar = '1' then 1 else 0 end)
Your final query should look like this:
SELECT
m.torneio,
m.deck,
m.top,
m.lugar,
sum( m.quantidade ) AS quantidade,
m.formato AS formato,
q.quantidade AS qtorneio,
t.season AS season,
sum( m.top ) AS totaltops,
sum(case when m.lugar = '1' then 1 else 0 end) AS venceu
FROM
`metagame` AS m,
quantidade AS q,
torneios AS t
WHERE
m.torneio = t.nome
AND m.torneio = q.nome
GROUP BY
m.deck
If I understand your question you can use this:
sum(case when m.lugar = '1' then 1 else 0 end)
or you can try having clause
SELECT column_name(s)
FROM table_name
WHERE condition
GROUP BY column_name(s)
HAVING condition
ORDER BY column_name(s);
I have this query
SELECT ps_ur AS UR, COUNT(ps_ur) AS Value
FROM patient_services
GROUP BY UR
UNION ALL
SELECT eng_ur AS UR, COUNT(eng_ur) AS Value
FROM engagements
WHERE LENGTH( eng_ur )>0
GROUP BY UR
Result:
UR Value
002035 3
002400 2
005441 4
...
Now I need to calculate from Patient table Male/Female and multiply by the Value
Like this but right
SELECT
SUM( CASE WHEN patient_gender = 'Male' THEN 1 ELSE 0 END ) Male,
SUM( CASE WHEN patient_gender = 'Female' THEN 1 ELSE 0 END ) Female
FROM patients WHERE patient_ur
How to do this?
In that case you want wrap the first as inner query. Something like below. Now you can access the Value field saying xxx.Value and multiply or do whatever processing needed. Not sure where you want to multiply and thus couldn't reflect it in suggested query. Probably that's left as homework for you.
SELECT
SUM( CASE WHEN patient_gender = 'Male' THEN 1 ELSE 0 END ) Male,
SUM( CASE WHEN patient_gender = 'Female' THEN 1 ELSE 0 END ) Female
FROM patients JOIN (
SELECT ps_ur AS UR, COUNT(ps_ur) AS `Value`
FROM patient_services
GROUP BY UR
UNION ALL
SELECT eng_ur AS UR, COUNT(eng_ur) AS `Value`
FROM engagements
WHERE LENGTH( eng_ur )>0
GROUP BY UR ) xxx ON patients.patient_ur = xxx.UR
I am trying to make a row in the end of the result set that shows the totals.
My query is this:
SELECT
[ ] = ISNULL(CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente, 'TOTAL'),
[2016-11-01] = MAX([2016-11-01]),
[2016-11-02] = MAX([2016-11-02]),
[2016-11-03] = MAX([2016-11-03]),
[2016-11-04] = MAX([2016-11-04]),
TOTAL = COUNT([2016-11-01]) + COUNT([2016-11-02]) + COUNT([2016-11-03]) + COUNT([2016-11-04])
FROM
(
SELECT GEN_Paciente.GEN_idPaciente,COALESCE(GEN_ape_paternoPaciente, '')+' '+COALESCE(GEN_ape_maternoPaciente, '')+' '+COALESCE(GEN_nombrePaciente, '') AS nombrePaciente,HOS_fechaCategorizacion,HOS_nivel_riesgoCategorizacion+CAST(HOS_nivel_dependenciaCategorizacion AS VARCHAR) as riesgoDependencia
FROM HOS_Categorizacion
INNER JOIN HOS_Hospitalizacion
ON HOS_Hospitalizacion.HOS_idHospitalizacion = HOS_Categorizacion.HOS_idHospitalizacion
INNER JOIN GEN_Paciente
ON GEN_Paciente.GEN_idPaciente = HOS_Hospitalizacion.GEN_idPaciente
WHERE HOS_nivel_riesgoCategorizacion IS NOT NULL
) src
PIVOT
(
MAX(riesgoDependencia)
for HOS_fechaCategorizacion in ([2016-11-01],[2016-11-02],[2016-11-03],[2016-11-04])
) p
GROUP BY
ROLLUP(CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente)
This gives me this result:
But as you can see the totals for the rows are right but the totals for the columns are wrong because I am using MAX instead of COUNT, but I only need COUNT in the TOTAL row, the others have to be MAX, so I wrote this query:
SELECT
[ ] = ISNULL(CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente, 'TOTAL'),
[2016-11-01] = CASE WHEN CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente IS NOT NULL THEN MAX([2016-11-01]) ELSE COUNT([2016-11-01]) END,
[2016-11-02] = CASE WHEN CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente IS NOT NULL THEN MAX([2016-11-02]) ELSE COUNT([2016-11-02]) END,
[2016-11-03] = CASE WHEN CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente IS NOT NULL THEN MAX([2016-11-03]) ELSE COUNT([2016-11-03]) END,
[2016-11-04] = CASE WHEN CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente IS NOT NULL THEN MAX([2016-11-04]) ELSE COUNT([2016-11-04]) END,
TOTAL = COUNT([2016-11-01]) + COUNT([2016-11-02]) + COUNT([2016-11-03]) + COUNT([2016-11-04])
FROM
(
SELECT GEN_Paciente.GEN_idPaciente,COALESCE(GEN_ape_paternoPaciente, '')+' '+COALESCE(GEN_ape_maternoPaciente, '')+' '+COALESCE(GEN_nombrePaciente, '') AS nombrePaciente,HOS_fechaCategorizacion,HOS_nivel_riesgoCategorizacion+CAST(HOS_nivel_dependenciaCategorizacion AS VARCHAR) as riesgoDependencia
FROM HOS_Categorizacion
INNER JOIN HOS_Hospitalizacion
ON HOS_Hospitalizacion.HOS_idHospitalizacion = HOS_Categorizacion.HOS_idHospitalizacion
INNER JOIN GEN_Paciente
ON GEN_Paciente.GEN_idPaciente = HOS_Hospitalizacion.GEN_idPaciente
WHERE HOS_nivel_riesgoCategorizacion IS NOT NULL
) src
PIVOT
(
MAX(riesgoDependencia)
for HOS_fechaCategorizacion in ([2016-11-01],[2016-11-02],[2016-11-03],[2016-11-04])
) p
GROUP BY
ROLLUP(CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente)
But that is not working
Thanks for your help!!
If I understand this correctly you want to count all columns which are not null. In this case you should just look at the condition IS NULL and not at the actual value at all. Try this:
DECLARE #tbl TABLE(ID INT IDENTITY, val1 VARCHAR(100),val2 VARCHAR(100),val3 VARCHAR(100));
INSERT INTO #tbl VALUES
('row1_val1','row1_val2',NULL)
,('row2_val1','row2_val2','row2_val3')
,(NULL,'row2_val2',NULL)
,(NULL,NULL,'row2_val3')
,(NULL,NULL,NULL);
SELECT *
,CASE WHEN val1 IS NULL THEN 0 ELSE 1 END
+CASE WHEN val2 IS NULL THEN 0 ELSE 1 END
+CASE WHEN val3 IS NULL THEN 0 ELSE 1 END AS CountOfValNotNull
FROM #tbl
UPDATE: Add a final Totals Row
You'd need ugly fiddling with a CTE, an additional sort column, UNION ALL to add another row and a sub_select.
Use the outer-most ORDER BY to get the artificial Totals-Row to the end
hint: Use the #tbl variable from above!
WITH SortedRows AS
(
SELECT ROW_NUMBER() OVER(ORDER BY ID) AS SortColumn
,*
,CASE WHEN val1 IS NULL THEN 0 ELSE 1 END
+CASE WHEN val2 IS NULL THEN 0 ELSE 1 END
+CASE WHEN val3 IS NULL THEN 0 ELSE 1 END AS CountOfValNotNull
FROM #tbl
)
SELECT tbl1.*
FROM
(
SELECT * FROM SortedRows
UNION ALL
SELECT 999999,0,'','','',(SELECT SUM(CountOfValNotNull) FROM SortedRows)
) AS tbl1
ORDER BY tbl1.SortColumn
I have a table like this-
I want to run a query so that I can have a output like it-
I don't have a clear idea how to do it.
So, what I have done is-
SELECT
Count(* where status="Active") as count_active
Count(* where status="Inctive") as count_inactive
Count(* where status="Biase") as count_biase
FROM `subscribers`
And getting error, can anyone please help?
Can achieve this with a Case expression.
Query
select
count(case when status = 'Active' then 1 else null end) as Active_Count,
count(case when status = 'Inactive' then 1 else null end) as Inctive_Count,
count(case when status = 'Biase' then 1 else null end) as Biase_Count
from tbl_name;
SQL Fiddle
This is the way to put it in a single register:
SELECT
(SELECT count(id) FROM new_table where status = 'Active') as Active_Count,
(SELECT count(id) FROM new_table where status = 'Inactive') as Inctive_Count,
(SELECT count(id) FROM new_table where status = 'Biase') as Biase_Count;
Hy guys, sometimes my subquery return null which is ok, it should return null, but in those cases i would like my "parent select" to return null.
Is that possible?
And if yes, then how?
Heres the code:
SELECT
`company`.`companyID`,
`company`.`companyName`,
`company`.`companyName`,
`company`.`companyEmail`,
`company`.`contactEmail`,
`company`.`companyTel`,
(
SELECT
`package_map`.`szekhely_endDate`
FROM
`package_map`
WHERE
`package_map`.`companyID` = `company`.`companyID`
AND
`package_map`.`active` = 1
AND
`package_map`.`szekhely_endDate` > NOW()
ORDER BY
`package_map`.`szekhely_endDate` DESC
LIMIT 1
) as endDate,
CASE
WHEN endDate = NULL
FROM
`company`
WHERE
`company`.`companyBase` = 'some address'
AND
`company`.`szekhely_check_out` = 0
Use an ordinary INNER JOIN between the two tables. If there's no matching rows in the package_map table, there won't be a row in the result. To get the latest endDate, use the MAX() function.
SELECT
`company`.`companyID`,
`company`.`companyName`,
`company`.`companyName`,
`company`.`companyEmail`,
`company`.`contactEmail`,
`company`.`companyTel`,
MAX(package_map.szekhely_endDate) AS endDate
FROM company
INNER JOIN package_map ON `package_map`.`companyID` = `company`.`companyID`
WHERE
`company`.`companyBase` = 'some address'
AND
`company`.`szekhely_check_out` = 0
AND
`package_map`.`active` = 1
AND
`package_map`.`szekhely_endDate` > NOW()
GROUP BY `company`.`companyID`