i have set the TransactionOption as Required in my SSIS package. But the package fails. The error shown is some MSDTC error. I am not able to get it. is there any settings to be changed or done in the machine or server we are deploying/running/working the package ? So wat all steps should we have to follow for setting Transaction in a package.
"The built-in transaction support in SSIS makes use of the Distributed
Transaction Coordinator (MSDTC) service which must be running. MSDTC
also allows you to perform distributed transactions; e.g. updating a
SQL Server database and an Oracle database in the same transaction."
How To Use Transactions in SQL Server Integration Services SSIS
I hope this helps
Related
I created simple SSIS package for copying the data from one table to other table with SQL server authentication. But I have SQL database in azure virtual machine.
The SSIS package will work successfully when I run in my local machine. After that I deployed SSIS package through the Devops flow like this below image.
After Release succeeded, then SSIS package will deployed successfully but when I execute the package it gives the error like this below figure.
can any one please tell me how to resolve this error as soon as possible?
Convert the SSIS package to Ado.net connection and try. You may also try to change the password and check
Reduced the amount of data requested and the frequency.
Additional information:
Connecting to SQL Azure Database by using OLE DB is not supported.
http://msdn.microsoft.com/en-us/library/windowsazure/ee336245.aspx
Use ADO.NET source and ADO.Net destination in SSIS dataflow tasks to talk to SQL Azure through the SQL Client library. SSIS team added bulk insert support in SQL 2008 R2 to support bulk load to azure using ADO.Net only.
I know similar questions have been asked before...
I am working on a remediation project which requires to migrate an existing SSIS package from SQL Server 2008 32-bits to 2014 64 bits. The data source is an Ingres database (32-bit server, 2 tables). Some CRUD statements are performed in SSIS because updates a couple of tables on the SQL Server side.
It works beautifully on the previous platforms but with the SQL Server upgrade to 2014-64 bit it does not work anymore, with the famous error
The specified DSN contains an architecture mismatch between the Driver and Application
I have tried to set the "Run64bitRunTime" flag in the SSIS package to false, but then the OLEDB driver on SQL Server 2014 complains
An OLE DB error has occurred.... An OLE DB record is available.The AcquireConnection method call to the connection manager “” failed...
Out of curiosity when I tried to use the SQL Server Import and Export 32-bits program I can communicate with both Ingres and SQL Server 2014 and transfer data across from Ingres to SQL with no problem. I can save the Import-and-Export into a package but I really don't want to add all the SQL transformation statements from the original package to the new one (consider it is a remediation project).
I am now confused why the new package fails, but the Import and Export wizard works? Is there something I need to change in the new package to make it works in the new environment (apart from altering the Run64bitRunTime flag)
More information: I have tried to install the SSIS package as a file, or as part of the Integration Services Catalog, but both fail.
Any more information required please let me know. Thanks in advance.
I have resolved my problem by editing the SSIS package to make the SQL server data source to become OLEDB. It was painful to remap all the data columns though.
I have a SSIS package and it was scheduled as job. I made changes in the package and try to re-deploy the package but at that time the scheduled job running. How it will effect ?
Basically you need to understand how SQL Server Agent works internally or some sort of it's logical architecture. Any SQL server agent action is get translated into a series of stored procedure calls. Actions typically result in metadata changes inside the SQL Server store. If such a change requires an immediate update of SQL Server Agent's internal data cache or a direct response from SQL Server Agent, the extended stored procedure xp_sqlagent_notify is called to place a formatted message in a shared memory object from SQL Server. SQL Server Agent continuously looks at this communication channel and processes all information placed into the shared memory object sequentially.
SQL Server Agent is a Windows service, so if your deployment was successful then agent will refer newly deployed data.
If you are familiar with SQL profiler, you can set up a trace to watch the commands that SQL Server Agent sends to SQL Server.
I have an SSIS package that takes data from a MySQL database and puts it in to a SQL Server table. The connection to MySQL is ADO.net. The package runs fine in BIDS.
I would like to deploy the package to be run as a Job on SQL Server 2008. The MySQL connection requires sensitive data to be either stored within the package or held in some external configuration source. If it is stored within the package it will either by encrypted with a key specific to my windows user profile or must be protected via a password.
I have tried three methods of setting up a SQL Server Agent job to execute this pacakge, and all fail:
Using a Password
I set the ProtectionLevel of the package to EncryptSensitiveWithPassword and supply a password for the package. I then save a copy of the package to the msdb. I can then connect to SSIS and run the package, at which point I am prompted for a password.
When I try to schedule this as a job in SQL Server I am prompted to enter the password by clicking on the Configurations tab of the Job Step Properties and I can see that the /DECRYPT switch has been added to the Command Line tab. The Run As property is set to the SQL Server Agent Service Account, which is mapped to a database login that has sysadmin server role. When I attempt to start this job I get the following error:
Executed as user: DOMAIN\UserROLE. Microsoft (R) SQL Server Execute Package Utility Version 10.0.5500.0 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 12:31:30 Error: 2012-07-03 12:31:31.20 Code: 0xC00291EC Source: Get Data Execute SQL Task Description: Failed to acquire connection "DATA_SOURCE". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error DTExec: The package execution returned DTSER_FAILURE
It seems that using this method the package password itself is not stored anywhere for the job to access it.
Using an XML configuration file
I then created a copy of the package and set the ProtectionLevel to DontSaveSensitive and I set up a package configuration to store the MySQL credentials in an XML file. I then save this to the msdb and then when I run the package from
Integration Services I can provide a path to the config file, and all is well. However, once again when I set up a job for the package I point to a configuration file on the server but the job fails with the same error. I am wondering whether this is because the SQL Server Agent does not have an associated windows account that would allow it to read from the XML file stored in the file system.
Using a SQL Server table configuration
This time I created a copy of the package and set the ProtectionLevel to ServerStorage. I then created a [SSIS Configurations] table in the target SQL Server database. I modified the entries in this table to contain the password for the MySQL data source. Again, the package runs successfully from Integration Services, but fails with the same error as previously when run from a job. I have checked that the SQL Server Agent is able to read from the [SSIS Configurations] table ok - I set up a standalone job to test this.
Does anyone have any suggestions about what else I should do here?
I am thinking of giving up on SQL Server Agent Jobs for this and going back to having the package scheduled simply by the windows scheduler but thought before throwing in the towel I would try here first.
I am using the method of encrypting the password by setting EncryptSensitiveWithPassword as you discribed above and don't see anything you do wrong. Remember to use option keep protection level of the original package when importing the package with integration services, but it looks like you're doing that, too.
Try setting the role SQLAgentOperatorRole to your SQL Server Agent Service Account, you didn't mention that and i am not sure if you did. This could possibly solve your permission problems. (liked to answer by commenting this, but i lack of permissions here, too :)
I have created a SSIS package. I need to apply Transaction to this package for rollbacking in case the package fails. What I found is a property "TransactionOption" which should be given "Required". Am I right ? And I have set TransactionOption for the package as "Required" But the package fails when I executed. What all steps should I do for setting TransactionOption "required" ?
In detail, My package contains 4 control tasks. One of them is a Data Flow Task, containing Lookup Tasks.
I got the following error
"[Execute SQL Task] Error: Failed to acquire connection "SQLConnectionMgr1". Connection may not be configured correctly or you may not have the right permissions on this connection."
When I set the TransactionOption to "Supported", the packages runs successfully.
Create 2 "OLE DB Connection managers" both connecting to the same
database. On the properties of one of the "OLE DB Connection
managers" set the 'RetainSameConnection' property to true.
Then create 3 "Execute SQL Task" and connect them with the "OLE DB
Connection managers" were the 'RetainSameConnection' property is set
to true.
Add the following statements on there respective Execute SQL task
BEGIN TRANSACTION
COMMIT TRANSACTION
ROLLBACK TRANSACTION
It sounds like you might not have appropriate permission to use the Distributed Transaction Coordinator (MSDTC) service which is required to utilize transactions in SSIS.
See this article on Transactions for more information: http://www.mssqltips.com/tip.asp?tip=1585
Also you might need to look more into how the MSDTC works in relation to SSIS to get your issue resolved.
To enable Trancaction is ssis you need to check below prerequiste
1, Distributed Transaction Coordinator (MSDTC) service should be started in the machine, if its local machine.
2, if you are using has a client (server machine-->user machine) then MSDTC enabled in both machine with security option of NETWORK DTC Access (Allow Remote Clients, Allow Inbound, Allow Outbound) under Component Services --> Computer Properties --> MSDTC tab --> Security Option
3, Sometimes Firewall from any one machine or both can be blocked of network DTC so you need to disable/uninstall.
Errors:
Cannot Acquire Connection Manager
Solution:
check the step 1 if you are user of local machine, if you are client user check step 2 and 3
Then asusual
change the Trancaction Option as required in the properties of package level or container level as you required and check.