I am also using windows 7.I installed mysql server 5.1.
Created a user as 'user#localhost' using mysql console. But unable to login to that user.
I tried to run using command prompt.
When I created a user with name "user". when i tried mysql -u user -p
It says Access Denied to 'user#localhost' ..
Even trying with mysql console is not helping out here. .
A few things to try:
Make sure your user has the correct privileges set (global or schema level privileges)
try running FLUSH PRIVILEGES
To help us troubleshoot, what does this command return? SHOW GRANTS FOR 'user'#'localhost';
Related
I have installed Xampp on windows 10 to create a simple app to understand how to use Laravel. I have the last version of Xampp. I configure PHP correctly (with path and so on), but I have a problem with MySQL.
I put the MySQL bin folder address in the user variables path (section in the system properties). In this way, my prompt command recognizes the mysql command. The problem arrives when I write this command: mysql -v. I tried a lot of things, but this Error remains:
ERROR 1045 (28000): Access denied for user 'personalUser'#'localhost' (using password: NO)
PS: personalUser is a generic name to indicate the name of my user.
I have tried to substitute the MariaDB with MySQL in the Xampp folder (I don't know why Xampp has the MariaDB version instead of MySQL). I redownload Xampp twice times. In the xampp folder, in the phpMyAdmin folder, in the file config.inc.php, I changed this command line:
$cfg['Servers'][$i]['password'] = ''; with $cfg['Servers'][$i]['password'] = 'NO';
I tried other things.
Based on the error message you are receiving, it seems that the issue is related to the authentication credentials for the MySQL server. The error message indicates that the user 'personalUser' is not allowed to access the MySQL server because they are not using a password.
To fix this issue, you can try the following steps:
Open the MySQL command-line client by running the mysql command in your terminal or command prompt.
When prompted for a password, enter the password for the user 'personalUser'.
If you do not know the password, you may need to reset it by following the steps in this MySQL documentation: https://dev.mysql.com/doc/refman/8.0/en/resetting-permissions.html
Once you have successfully authenticated with the MySQL server, you can use the GRANT command to grant the 'personalUser' user access to the database you want to use. For example, to grant access to the 'mydatabase' database, you can use the following command:
GRANT ALL PRIVILEGES ON mydatabase.* TO 'personalUser'#'localhost';
After granting the appropriate privileges to the user, you should be able to access the MySQL server and use it with Laravel.
If you continue to have issues, you may need to check the configuration of the MySQL server to make sure that it is set up to allow access from the user 'personalUser'. You can refer to the MySQL documentation for more information on how to configure user access: https://dev.mysql.com/doc/refman/8.0/en/adding-users.html
I wanted to setup my owncloud installation on my raspberry pi 2. So, I created an mysql database and user.
CREATE DATABASE owncloud;
CREATE USER 'owncloud'#'localhost' IDENTIFIED BY 'Password';
GRANT ALL PRIVILEGES ON owncloud. * TO 'owncloud'#'localhost';
FLUSH PRIVILEGES;
After I type all nessesairy parameters into the webinterface of the owncloud-setup, I recevied:
Error while trying to create admin user: Failed to connect the database: An exeption occured in driver: SQLSTATE[HY000][1045] Access denied for user 'owncloud'#'localhost' (using password:YES)
Sadly, my resent sreach on similar topics didn't result in any functional hint on this problem. So, I would be happy about further suggestions.
Look at this: https://doc.owncloud.org/server/9.0/admin_manual/installation/installation_wizard.html#database-choice
In Terminal: mysql_upgrade --force -u root -p
Use administrative MySQL »root«-user and password with the Installation Wizard
Check that the Database not exist which you create with the Installation Wizard
If nothing helps, start with sqlite, then migrate to mysql like this: https://doc.owncloud.org/server/9.0/admin_manual/configuration_database/db_conversion.html
Just replace localhost for 127.0.0.1 in Owncloud's setup form for MySQL as mentioned in comments above by Askaga
For some reason, explicitly re-access the database from the terminal solves the problem for me. Just give mysql an empty line with
mysql -u root -e ";"
This should be an individual command after you created database and database user.
Sure, you should always check whether
There are users with an empty username. Remove them.
Remove "test" database.
Grant appropriate permission to your database user.
Last but not least FLUSH PRIVILEGES;.
Search other posts for instructions. I'm just providing a possible solution if you come across a situation where none of the above works.
Here's a good example to properly setup mysql after installation. FYI.
Mask the DB password in the installation screen (the password should not be visible, only dots) and retry.
Ubuntu 18.04.1, Owncloud 10.
Check the contents of config.php in my case located at /var/www/owncloud/config/.
Specialy items dbuser and dbpasswrd.
Read config.sample.php in the same directory for info.
I need to give a remote user access to a MySQL database. I also need to limit the permissions they have to the MySQL database tables. The current database contains approx. 50+ tables so rather than revoke permissions table by table, I'm trying to give the user access with no privileges and then add those that are needed. What I've done appears to work when:
I'm logged in as root (via SSH)
I login using "mysql -u username -p" - enter my password for the newly created user.
This users account honors all the privileges I've set up. However, when this user tried to connect via their desktop client - they can connect but can not view the database. When using "use databasename" they get this error:
Error Code: 1044. Access denied for user 'username'#'%' to database 'database_name'
Not sure if this helps but I'm using Media Temple DV w/ Plesk. I've first added the user. Then I SSH in and revoked ALL privileges. Then I added the privileges for the user and did command "flush privileges". Nothing is working. As I said, if I'm accessing via the command line (after SSHing in as root) the permissions are honored and I can access the database - just not remotely.
Any help would be greatly appreciated.
May be network that is allowed to connect is localhost, but not users network IP.
And check max connections amount.
If you're logged in as root via SSH and MySQL database is on the same machine, then i guess that if you run:
mysql -u username -p
you try to connect to MySQL as 'username'#'localhost' user.
If you want to connect to MySQL database from outside of this server, you need to:
create user like 'username'#'%' which allow to connect to MySQL using 'username' from anywhere ('%')
allow mysql server to connect from outside by setting bind-address more details here
I'm facing a strange issue here and it seems impossible to me to connect to my MySQL database.
I have used the workbench few times ago, but it was an older version. The problem with the new one (6CE) is that I can't connect directly to a database - it only allows me to create a connection to the server as a root user and I don't remember this password.
Is there a way to make a connection directly to the dataase itself as in the previous versions, or now only the root is an option. If yes I will have to reset my password.
Make sure that your credentials are still valid, and has proper privileges. If you can log into your mysql-server from terminal (with root account or the user you are trying with), then run "SHOW GRANTS" and see the privileges;
To connect to mysql database you need to have your user account's hostname specific to your IP or wildcard (%).
Similarly you can create a new mysql user with the following command from your server, and then try with this new user.
GRANT ALL ON <db>.* TO 'user'#'<ip or %>' IDENTIFIED BY '<password>' ;
FLUSH PRIVILEGES;
Be careful with the user created above. It will have ALL privilege with the specific database. And using % is actually a bad idea, so user you home machines IP (from where you are trying to connect with Workbench)
I installed wamp 2.1 on windows 7. However when i open phpMyAdmin, I get the error, Mysql 'No Provileges'. I uninstalled wamp and reinstalled it a few times, but it doesn't help. Does anyone know how to solve this issue?
Also, when i tried creating a database from mysql console, i am getting the following error:
ERROR 1044 <42000>: Access denied for user ''#'localhost' to database 'a_db_name'
Thank God and to all helped.
Its simple.
Must! click logout icon in phpadmin page
In login page, type:
username:root password: (blank)
surprise. now you can happily create your database.
Are you logging into MySQL as root? You have to explicitly grant privileges to your "regular" MySQL user account while logged in as MySQL root.
First set up a root account for your MySQL database.
In the terminal type:
mysqladmin -u root password 'password'
To log into MySQL, use this:
mysql -u root -p
Edit:
To set the privileges manually start the server with the skip-grant-tables option, open mysql client and manually update the mysql.user table and/or the mysql.db tables. This can be a tedious task though so if what you need is an account with all privs I would do the following.
Start the server with the skip-grant-tables option
Start mysql client (without a username/password)
Issue the command
flush privileges;
which forces the grant tables to be loaded.
Create a new account with the GRANT command something like this (but replacing username and password with whatever you want to use.
GRANT ALL on *.* to 'username'#'localhost' identified by 'password';
Restart the server in normal mode (without skip-grant-tables) and log in with your newly created account.
Refer this MySQL docs.
Take a look at my topic regarding this issue, which takes some of the above.
MAMP mysql broken root user
You need to shutdown your mysql install and restart it from the command line properly like is indicated above. In my topic I have full clear instructions on how to do so. My instructions are for MAMP but you should be able to adapt it for your install.
Simple solution. Just find the icon right to "home" in PhpMyAdmin and click to logout. Then login using username "root" and password ""(blank). This will work accordingly.
username ought to be root and keep the password null(keep the password field blank)
right click on the wamp icon and goto mysql console.
Login with password if you have set any.By default the password is blank and username is 'root'
Once you are in mysql prompt execute
FLUSH PRIVILEGES;
now quit the command prompt and you are good to go.
in step 1 .inter your databasevery important.
in step 2 .select your database via all tables .
in step 3. backup type=replace & export.
in step 4 import database in my sql.
attention please:in import your database...
all table must view & selected in step 4.