I have a job in Hudson server A which builds an artifact and deploys it to Nexus. I have another job in a completely separate Hudson server B which needs to download the artifact and deploy it. This job is normally run manually, and the person running it needs to indicate which version of the artifact to deploy - they may not always want to deploy the latest version (e.g. to roll back to a previous known good version).
Currently, I achieve this by using a parameterized build, and require the user to pass in the artifact version number; the job then uses the Execute shell build step to run wget on a URL constructed using the parameter. This is error prone.
Ideally I'd like a plugin that lets the user browse the artifact versions in the Nexus repository and pick and choose the one to deploy, but I'm open to other suggestions. A plugin that also handles the download would be nice, but I can live without it as long as I can still get a string that I can use in shell commands.
I've looked through the available Hudson & Jenkins plugins around Maven style artifact repositories, but they all seem more concerned with pushing artifacts into repos rather than getting them back down.
I'm using Hudson's "Copy Artifact" in other jobs, to get artifacts from other Hudson jobs on the same server, but this doesn't work across different Hudson servers, which is why I've turned to Nexus (which we're already using anyway).
Does anyone have any suggestions?
I recommend using rundeck to execute your deployments.
There is a rundeck plugin for Nexus that enables rundeck to display a pull down menu of available versions in Nexus.
There is a rundeck plugin for Jenkins that can be used to invoke deployments using rundeck and kick-off post deployment jobs (like integration testing) inn Jenkins.
Related
I am new in Teamcity and I created a Build, with a RunScript step.
I changed nothing in the source control configuration of this step.
The goal of the Build step is to run a script nothing else.
When running the build, Teamcity tries to do a source checkout (not configured) and stays blocked there.
What is the correct Teamcity SVC configuration in order that the build works even when SVC is not configured? Is it even possible or I should configure a fake SVC system like GIT to get it running?
With Teamcity, as with TFS, when you want to handle UI Tests, you should install the Test Agents as Interactive and not as Service.
If you Install them as Services, you will not have access to all the functionalities you need for UI testing.
I have working app on OpenShift server. My question is - how to update openshift's git repo of my application, if I make some changes using ssh acsess to openshift? I mean not using all this stuff with pull/push to my local mashine.
If I understand you correctly, you would like to modify source code without using git. I am not sure why you would want that. All that stuff with pull/push gives you a version control flexibility which can save you a lot of time when you screw up one thing. For example, you push brand new UI to production, which turns out to be buggy. With git, you have flexibility to revert back to previous version, and work on different branch to fix the bug on UI.
OpenShift follows conventional app structure. Git for source control, maven for build, jbosseap(for example) for app server, jenkins for continuous integration, etc. So, when you push using git, OpenShift will automatically build using maven, then deploy to the server.
If you would like to disregard all that advantages that OpenShift has to offer, use rhc ssh appname to directly work on the server.
I'm trying to implement a continuous deployment system and I seem to not be able to find a good answer for our problem.
We use Jenkins to run a maven build to generate our artifacts and deploy them to Nexus. I see a few projects that bundle up everything into a single war or tar file, extract one file per request from Nexus by name and deploy it to an application server, but this requires them to know beforehand what versions they have available.
My project has quite a few jars/wars/binaries among other artifacts, which don't get deployed using an application server. What we want to do is be able to do is pull any snapshot or release revision of the software out of nexus and either generate an install package or deliver it directly to a remote server.
Clarification: I want QA or development to be able to select a version from Jenkins; where Jenkins will poll Nexus for the available versions, then perform an automated deploy to a server from Nexus.
Is there an easy nexus/maven way to get software out to a testing system?
So, is there a way to poll nexus to determine what revisions are available through ant/ivy, Jenkins, maven, gradle? I'll write in something else if it helps.
I see that a similar question was asked here: How do I choose an artifact from Nexus in a Hudson / Jenkins job?, but it is as of yet unanswered 9 months later.
Nexus gives you a standard HTTP browsing capability. You could browse the repository through HTTP and see what is available.
I still don't understand your Use Case though. If you know which versions of the project you want then what is the problem?
The easiest would be to write an installer pom.xml that has in it a ${} placeholder for the version you want for the artifacts then invoke mvn with mvn package -Dproduct.version=1.0.0
If you use a container, PAX has plugins that allow you to specific artifacts like mvn:myGroup/myArtifact/myVersion and it will auto pull from Maven.
Nexus isn't doing any magic. It's all well known paths on a URL of groups/artifactId/versions
Oure teamcity server (6.5) configured to checkout sources from SVN. For some build proceess cases I need checkout previous successfully builded version(revision). Can teamcity do this? And if can, how to configure checkout?
It sounds like you're looking for TeamCity Snapshot Dependencies, with the "Only use successful builds from suitable ones" option.
You'd end up with two build configurations:
Performs initial builds on commit to SVN
Has a snapshot dependency on #1, so when this build runs (either automatically - via a trigger - or manually), it grabs the same sources as the last successful build of #1.
Both of the build configurations would use the same VCS root.
I am new in Hudson.
I would like to execute a 'sourcecodeanalyzer' command in Hudson as Post-build Actions to generate an html report. Please let me know is this at all possible, if yes let me know the Hudson configuration steps to execute the command.
Your earliest response in this regard will be extremely helpful.
Thanks in advance.
Yes, it is almost certainly possible.
You will need to configure the Hudson project to have either a post-build action or a build step that runs your source code analyzer.
You've not stated in your question precisely which analyzer - it may be that Hudson already has a plug-in installed for it, in which case it may be listed on the Config page for the project at the bottom under Post-build Actions.
If not, next check to see if there's a plug-in available for the analyzer that hasn't been installed. From the main Hudson page select Manage Hudson, then Manage Plugins, and choose the Available tab. If there is a plug-in available it's definitely a good idea to use it as they are generally very well integrated with Hudson itself.
As a last resort you'll have to configure a build step to run the analyzer. Configure the project, then choose "Add build step". The drop-down that appears depends on your environment (Windows or Linux) but should include the ability to run a shell command or batch file. You can configure your analyzer there.
(If you're building Windows Visual Studio applications, a more flexible way that I've used is to use the MSBuild plug-in for builds, and have an MSBuild script that builds the application and then runs analysis tools. This can automate pretty much everything: mine builds the application, builds an acceptance test database, runs the acceptance tests and copies the result HTML to a page linked from the project.)
You could create a new job with a "Execute Shell" build step. Type in the command you wish to run in the text box. Then all you have to do is trigger this job by selecting:
"Build after other projects are built"
And select the trigger job from the list.
Hope this helps!
As a follow up to Jeremy's post. If you don't see the ability to add post build steps, you might work with maven jobs. In that case you need the Hudson M2 Extra Steps Plugin. This will give you pre and post build steps.
I use the 'Post build task' plugin to delete some resources after a build. You could call any shell script or command lines. If you want you could make the call depends on some logging output.
there is one best way to solve this:
Upgrade to Fortify SCA 2.6.x (as of writing, latest version is 2.6.5).
Download the Fortify Maven Plugin version 2.6 from https://customerportal.fortify.com and install it into your Hudson server's Maven repository.
Update your project's pom to carry out the Fortify scan. There is an example provided with the Maven plugin.
Currently , I am experiment with sonar plug in. It looks great check the details here
http://sonar.codehaus.org/a-new-hudson-plugin-for-a-closer-integration-with-sonar/
http://wiki.hudson-ci.org/display/HUDSON/Sonar+plugin