I have table with 3 rows of header, and I needed repeat on new page only second row, first and third is not needed in the pages, excepts first page.
If I set the properies "RepeatOnNewPage" in the second row only, SSRS show the error: "The TablixMember must have the same value set for the RepeatOnNewPage property as those following or preceding the dynamic TablixMember"
If I set this property in the all (3) rows of header - all ok, but I need only one :)
How to repeat only second row on new page?
I am not sure why, but this seemed to work for me.
For your 3 header rows advanced properties,
(Static) KeepTogether= false, KeepWithGroup=None, RepeatOnNewPage= TRUE
(Static the one you want) KeepTogether= True, KeepWithGroup=After, RepeatOnNewPage= TRUE
(Static) KeepTogether= false, KeepWithGroup=None, RepeatOnNewPage= TRUE
When i tried this with the top and bottom rows repeat on new page False it gave me the error you described. I changed these to true just to try. I expected them to Repeat on new page but they didnt. My first page had all 3 and the rest just had the middle.
Hope this works for you!
Go at Column Groups
Click on the black arrow at the last
Select advanced mode.
Go at "Row Group"..
In row group you will get LOTS of "static", out of which just select TOP MOST
Go to properties
A. For VS: press F4
B. For report builder... View->Properties
In that select for row headers
a. Fixed Data: True
b. Keepwithgroup: After
c. Repeatonpage: True...
And for main headers
a. Fixed Data: True
b. Keepwithgroup: Before
c. Repeatonpage: True
Set property RepeatOnNewPage = True for all rows of table. Select static row from Row Groups window.
You must have to set RepeatOnNewPage property for all static rows.
If any static row is not set RepeatOnNewPage property than it dosen't work and give error.
So just to help clarify the answer based on success from working on my table. When I did the above action on the top-most static row, I got an error message. My table has three headers that are grouped and all need to be included in the repeatOnNewPage function. In order to successfully run my report, needed to repeat the step for all the static row headers.
Static (for each row): FixedData = True, Keepwithgroup = After, and RepeatOnNewPage = True
I also went into Tablix properties and checked both boxes under Row Headers for Repeat header rows on each page & Keep header visible while scrolling.
It was a very happy moment when i did not receive an error message after completing this scenario. good luck.
Related
I'm creating a report with a basic table:
This table will print a Direct Transfer:
Fields are populated by simple drag & drop from the left pannel (dataset).
When printing the report, I can see a blank row in the header:
How can I remove that empty row? I didn't apply any spacing or anything to add a blank row...
EDIT:
The grouping part is by default, I didn't edit anything:
Based on #Alan Schofield comment I've checked if the dataset came with an empty row by painting the table rows in yellow and table header in blue.
Confirmed that there was an empty row in the dataset.
Then as a simple (not clean) solution I've added a conditional visibility to the table rows:
=IIF(Fields!ItemNo_TransShptLine.Value = "", True, False)
In my case, all rows will have an "Item No.", so if there's a row without it won't print:
I am unable to hide floating filter row.
you would notice an empty line even though there are no filters enabled.
Demo at : https://plnkr.co/edit/6bGd5RHKuI9Th1cN
The Source of demo is same as default demo at https://www.ag-grid.com/javascript-grid-floating-filters/
with the only exception of below line added after the columnDefs variable declaration code, to hide the columns
this.columnDefs.forEach(c => (c.filter = false));
Or is it a Ag-grid issue?
Issue image:
Any thoughts?
As per documentation: Floating Filters
Floating Filters are an additional row under the column headers where the user will be able to see and optionally edit the filters associated to each column.
Floating filters depend on and coordinate with the main column filters.
Hence, when you set [floatingFilter]="true" at grid level, the additional row will be displayed. However, as you've set filter = false for every row, the row will remain empty.
If you'd like to hide the row, you'll have set the property as per this plunk: https://plnkr.co/edit/AriPNpPsWs0zuISI
this.floatingFilter = false;
<ag-grid-angular
#agGrid
...
[floatingFilter]="floatingFilter"
...
></ag-grid-angular>
I am trying to use an existing page break parameter in a new tablix that I added to an exisitng ssrs 2008 r2 report.
I am trying the solution at http://stackoverflow.com/questions/15513313/conditional-page-breaks-at-group-level-in-ssrs2008-r2-reports/ so I can use the disabled property of the page break option on on the new tablix by using a parameter value that is 'text' and the parameter values are either True or False.
The new tablix that I am using has 5 level of row groups.
The problem is I do not see a 'group' property where I can set the control group name.
When I do set the pagebreak of the tablix I am working with to the following, =IIF(Parameters!PageBreak.Value="True",false,true), and run the page break parameter to true, I do get the page breaks. However when I set the page break parameter to false, all I see is information for one control group. I am basically missing all the informatiuon I need.
How do I solve this problem?
Click on the horzontal bars under the Row Groups. If you click for example on [StudentFullName your property pane on the right side changes to the group properties (Properties: Tablix Member). There you navigate to Group > Group > PageBreak > Disabled. Now put your expression in the Disabled property. Just follow the steps from the other post and you are done.
UPDATE
If you want a page break before each new item of a group right click on your group properties (in your case for example right click on [StudentFullName) then go to the tab page breaks and check the Between each instance of a group box.
I want to add blank rows after every single page-break that the table is having, can it be done?
I am not sure it can be achievable or not. If yes, it is , please share some insight.
Just add a blank row under your header, and set the header to appear on every page.
Right click the Tablix -> Tablix Properties -> Under the "General" tab, make sure "Repeat Header rows on each page" is selected.
You can add an empty row at the end of last record, but there is no straight forward way of doing it at the end of each page.
For inserting an empty row at the end of all the records, simply add new row by clicking 'Outside group - Below' under 'insert row' option in table.
One thing which can help in your case is, try inserting new row by clicking 'Inside group - below' option and hide/show it on the basis of some expression. You can show that blank row based on page size, eg
NumberOfRecords mod PageSize = 0;
You need to insert this type of expression by navigating to
'Row Visibility' -> 'show or hide based on an expression'
Let me know if it helps.
I have, what I think is a pretty simple table in Report Builder 3.0. I have team & salesperson grouped by team in the far left column (row headers) and I want those to repeat when the report is multiple pages. I've tried what this article suggests: http://msdn.microsoft.com/en-us/library/dd207045.aspx but it doesn't seem to work. I have a sales amount and a goal in the table with various departments grouped in my headers.
How do I get the row headers to repeat?
Can you check the property values of the corresponding static rows(header related)..to do this you can click on the arrow pointed downwards in the bottom right..select the "Advanced mode" which opens the strows..select the corrsponding static header row under "Row Groups" in bottom left of report builder..Check if the "RepeatOnNewPAge" to true and "Keep With group" to After..Change the values if they are not ..You can go through the following link
http://vbcity.com/blogs/xtab/archive/2010/06/14/what-to-do-when-the-repeatcolumnheaders-property-in-a-tablix-isn-t-working.aspx