I'm using the caurina.transitions.Tweener; class with AS3 to tween a 3D object through my 3D environment (created with alternativa3D platform) from point A to point B. And everything works great, they move as intended from where they were to where I told them to go.
I was wondering if there was a way to make the object stop moving (or tweening) if the slope they were trying to walk over was too steep (like a giant hill or mountain in real life)?
This is basically the code I am using for this:
var playerDistance: Number = Vector3D.distance(
new Vector3D( _escapeeManager.activeEscapee.x,
_escapeeManager.activeEscapee.y,
_escapeeManager.activeEscapee.z ),
intersectData.point );
Tweener.addTween( _escapeeManager.activeEscapee, { x:intersectData.point.x, y:intersectData.point.y, time:(playerDistance/_escapeeManager.activeEscapee.speed), transition:"linear" } );
And if you'd like to see an example in the game I'm developing, it can be found here:
http://redmenmusic.ca/godsend.html
Thanks for your help guys!
It seems a bit odd to use Tweener for anything other than superficial animations - you probably need to implement a more complex system to handle object movement, collision detection, slopes etc.
The caurina.transitions.Tweener has some properties that could come by handy for your problem. I'am not saying it's the Tweener is the best way, bit it will get you where you want I guess :).
The official Tweener documentation website can be found here: http://hosted.zeh.com.br/tweener/docs/en-us/. The section 'Tweening parameters' would be a interesting read for you.
So for your problem, I would suggest to approach it this way:
There is a onUpdate event which is executed on every update of the Tweener. On every update you could check if the slope is to steep or not.
Example:
Tweener.addTween(myMovieClip, { x:100, time:1, onUpdate:function() { /* check here if the slode is to steep - if it is you can remove the Tweener on the object and proceed with an other function */ }});
I hope it's clear :)
Good luck!
Related
This question may get downvoted or go unanswered because it's not the greatest and incredible silly but anyway,
I'm taking an intro level Webanimation course this semester at UNI and had I know what their expectations are for our hand-in projects i would have never taken it up.
Basically the teacher taught us stuff to the extent of masking/tweening and very few mouse-event and basic function codes.
Now she is expecting us to make a god damn ENTIRE PIPE GAME. The one where there are a bunch of rotating pipes and you gotta rotate them in place before a timer runs out and then the water flows through them.
For this project I have to somehow figure out the following (even though she didn't teach any of this):
-creature a grid of rotate-able pipes (one mouse click I assume would do a 90 degree classic tween rotation of the object)
-creature some sort of logic hit-box value chain to make pipes decide when to fill with water (they fill with water (a.k.a turn blue inside as an animation) once they are connected to another water filled pipe, for example)
-creature multiple levels and a menu screen
-add a music track.
Now i know this site is for specific help only and you basically can't ask for help on an entire project, so for now if somebody could just help me out with the following:
How do I create a rotating pipe on mouseclick?
So I have my pipe movieclip created and I have my Mouse Event code ready but I don't have the faintest on how to make a tween within the pipe and connect it to the code so that it rotates on mouseclick.
So this far, let's say for one of the pipes, instance pipe_1, I want to do this:
pipe_1.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
function fl_MouseClickHandler(event:MouseEvent):void
{
trace("Mouse clicked");
}
I also have the simple tween of rotation already created within the instance of the pipe, but dunno how to connect it to code.
I'm supposed to figure out what to put inside the function but I honestly have no clue. Hours of googling have come up with nothing either except a 12 dollar purchasable source code for an even more complicated pipe game.
I hope somebody can at least help a bit, and thanks.
The way to rotate a clip is via it's rotation property. It defaults to 0.
If you were set the rotation property of your tile to 90, you'd rotate your pipe tile 90 degrees.
for example :
pipe_1.rotation += 90;
A tween is a means of changing a property of a given DisplayObject over time. So what you want to do is tween your rotation property 90 degrees over time.
Here is a tutorial on Tweening - http://www.republicofcode.com/tutorials/flash/as3tweenclass/
I think it'd be more beneficial for you to take the time to learn about it, than to have me just write a few lines of code to solve your problem.
StackOverflow is a place where you can ask a question, AFTER you have tried something and have hit an issue.
I have provided you with the basic concept of what you need to do, and if you take the time to learn about tweening, you'll be able to achieve your goal rather simply.
There are also tweening libraries such as TweenLite and TweenMax that simplify tweening. Not sure if your class will allow you to use them, but worthwhile to check out for your own benefit.
You can find TweenLite here :
http://www.greensock.com/tweenlite/
Are you talking about a frame by frame tween? or tweening with code?
for frame by frame tweening, you can try to do this:
pipe_1.addEventListener(MouseEvent.CLICK, f1_MouseClickHandler);
function f1_MouseClickHandler(e:MouseEvent) {
pipe_1.gotoAndPlay(2); //if the tween starts at frame 2
}
For code tweening, just call the tween function inside that handler function
I've found some stuff online about how to animate in actionscript 3 from within a class, but haven't been able to find a really good tutorial. I want to control the animations from a class because at some point I intend to move from the flash IDE to using flash develop, where I won't have access to the Flash IDE's timeline.
I have to be able to control an initial animation (opening a bag) which joins onto an animation loop (searching through a bag).
The only way I have been able to do this so far is to add an event listener to listen for the initial animation's final frame. Then when initialAnimation.currentFrameLabel = "Last" then I gotoAndStop("animationLoop").
This has been working fine, if a bit time-consuming. I'm just wondering if there's a better, easier way to do it? Can anyone tell me or point me towards a tutorial that does it better? Thanks very much!
Romano
I recommend instead of using an event listener, you use the method addFrameScript. Essentially you can fire a method when a specific frame number is reached.
Read the following question for more information.
actionscript3 whats the point of addFrameScript
It depends on what it is you want to do:
Usually if you are working together with an artist or want to do animations that are non-code driven, the "best way" is usually to listen for something to happen, and then start animations and on last frame of animation (or when you want to return control to code) you create an event, or use a callback or something else to let code notify that animation is complete or reached a certain point.
If you want to do something from code, the easiest way is to use an external animation library.
Tweener (https://code.google.com/p/tweener/)
TweenLite (http://www.greensock.com/tweenlite/)
Using those libraries, you would write something similar to:
function fadeOut():void {
mc.alpha = 1;
Tweener.addTween(mc, {alpha:0, time:0.275, delay:1, onComplete:onDone});
}
function onDone():void {
trace("Animation finished");
}
I simply added a sprite in AS3:
Sprite myspr = new Sprite();
myspr.addChild(mybitmap);
addChild(myspr);
Then I added an event. I did hitTestPoint for checking mouse is over my sprite or not.
stage.addEventListener(MouseEvent.MOUSE_MOVE, mouseCheck);
private function mouseCheck(evt:MouseEvent):void {
var xx:int = stage.mouseX;
var yy:int = stage.mouseY;
if(myspr.hitTestPoint(xx, yy, true)) {
...
// I'm checking mouse over here.
}
evt.updateAfterEvent();
}
Problem is: hitTestPoint gives true when mouse comes to full boundary box. But it should give true only if mouse comes on transparent isometric sprite.
Is there a solution for this, thanks in advance.
this should help. You need pixel perfect detection.
Actionscript 3 pixel perfect collision. How to? (learning purposes)
http://www.freeactionscript.com/2011/08/as3-pixel-perfect-collision-detection/
http://www.anotherearlymorning.com/2009/07/pixel-perfect-collision-detection-in-actionscript-3/
http://old.troygilbert.com/2009/08/pixel-perfect-collision-detection-revisited/
There's a few ways I usually do hit testing.
1) The easiest way is to use a an already made class that you can find online. Some people much smarter than me have created complex classes that allow for much better pixel to pixel interaction. The ones listed by Paras are all good. The problem with these is, for newer users, it can be hard to understand all the code and how to implement them. Usually it is simple once you understand what is going on though. You just replace your hit test with the class file and then enter in the correct arguments.
2) Another method is to actually go into the symbol, create a new layer, and then draw a rectangle(just turn the alpha down to 0%) where you want the hit test to work. This may seem like a stupid method, after all we are just confined to a square once again. BUT, it will actually work MUCH better than you'd expect. Just draw the square maybe slightly smaller than the height and width of your character you're detecting the hit test on, and you should be good to go. Give it an instance name (the hit square that is) and then just perform the hitTest with that square instead of the actual sprite. It works wonderfully and is a very simple solution. For what you're explaining though, this sounds like it might not work. This method is more from a gamer standpoint. It looks good when attacking and getting hit by enemies, but isn't necessarily exact. Also, if you want to do this with two characters (maybe a large attack hitting an enemy) simply draw a hit box for both sprites. This is probably a little more basic than using a pre-made pixel perfect hit detection test, but it works extremely well and takes only a few minutes.
Hi Im relatively new to flash developing and i have a quick question about saving user input. I have a maze scene whereby the user navagates a character around until confronted with another object, when the character hits the object a new scene is opened promting the user to pick a solution to a problem. Once the user clicks the correct answer a box appears saying return to the maze, however when clicked and returned to the maze the character starts back in its original postion, where as I would like the scene to resume where it left off, ie the character is at the point where it collided with the object, the object has dissappeared and the character can resume on the same course.
Thanks for giving this a read I hope it makes sense and some one has a solution for me.
I did have some nice images to explain it better but apprently i need 10 reputation points to upload those.
EDIT: First Id like to say thanks for the rep points you bunch of stars and secondly I know using scenes in flash is seriously cr*p practice and outdated but its the way I learnt all those years ago and seen as Flash itself will be outdated soon Im not really looking to learn another approach using sprites or frames, I just kind of want a fix for this way if poss thank you for answering!
EDIT: Wanting the red rectangle to be removed from the scene once the black square collides with it. It also takes you to the next frame upon doing so. here is my code.
addEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler);
function fl_EnterFrameHandler (event:Event):void
{
if (player.hitTestObject(Risk))
{
removeEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler);
removeChild(Risk);
nextFrame();
}
}
I'd suggest you forget about Scenes! They are old, buggy, bring loads of issues with code and are generally a Bad Pratice!! So if you are just learning AS3, dont learn with Scenes!!
Use MovieClips or Sprites instead. And just add and remove them as you need!
EDIT:
To ur edit ;)
and seen as Flash itself will be outdated soon
thats just plain false and a widespread misinformation. It just has a new purpose like MultiPlattform Game Development. But thats a whole different discussion.
You could solve this by saving the x,y coordinates and then restoring them. But i promise you, you will run in to alot more problems/bugs as you go allong!
Like saved Points and Time. Will you triger the Questionscene again when u place the player on the object(last Position). Save the answers, and so on ...
Changing to DisplayObjects will save you time in the end. Just saying ;)
EDIT2:
your code in the comment should look like this:
function fl_EnterFrameHandler (event:Event):void
{
if (player.hitTestObject(Risk))
{
removeEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler);//remove to prevent errors if it fires again and there is no Object to hitTest
removeChild(Risk);// do what needs to be done on this frame
nextFrame();// and then move to the next
}
}
And following correct convetions and make everybody's life easier reading this, it would look like this!
function fl_EnterFrameHandler (event:Event):void
{
if (player.hitTestObject(risk))
{
removeEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler);//remove to prevent errors if it fires again and there is no Onject to hitTest
removeChild (risk);
nextFrame ();
}
}
i'm probaly confusing u now, just use the top one ;)
EDIT3:
Ok, i just had a butchers at it. It's all on a single Frame now. I would have prefered Classes but that'lljust confuse you.
To add new qestions you just have to dublicate the Question MovieClip in the Library and change texts, leave instance names the same tho, then the code will work as is!
DOWLOAD
It is certainly possible. You would store the characters attributes (e.g. current position) within a variable. Then on returning to your game you would use this variable to set the starting position of your character.
I agree that scenes are not the ideal route you should be taking. Possibly reading a good AS3 book would save you hours/days/weeks in the long run.
Hello
I am coding a website
I am using caurina tweener and hove problem with pretty much every object that i try to tween.
Problem is that the tweened object sometimes just don't finish the animation. That's pretty annoying and i heard that this could be something with garbage collection.
Here is some sample code
Tweener.addTween(this, { rotationX:0, time:.5 } ); //Where 'this' is movieClip
any help is appreciated
since you're rotating your object in 3D (rotationX) it's more likely, as it seems, that your object is completing the tween correctly but your perspective makes it appear otherwise.
more here: Example: Perspective projection
Make sure you don't have competing Tweens running at the same time. This can result in conflicting animations, and the last one to run will be the only one you see. I usually do a Tweener.removeTweens(myObject) prior to calling Tweener.addTween(myObject, {}):
Tweener.removeTweens(this);
Tweener.addTween(this, { rotationX:0, time:.5 } );