I'm following the example of JTreeTable filesystem2 taken from the sun site http://java.sun.com/products/jfc/tsc/articles/treetable2/index.html#updating_the
My problem is that I can't update my model (and then my JTreeTable)...
In fact I create my model, I pass it to the JTreeTable and all work fine...but I need to modify the model...
I've yet answer a similar question, but now I've changed my code, without find a solution.
The problem is when and how I have to call the method fireTreeNodesChanged()...in the example above is used the method getPath() to retrieve information about the root node...but this is a method of File class..not my case...
Does anyone have a link to a simple code which shows how create a TreeTabelModel (with objects as nodes) and how update it?
FileBrowser is a good example of modeling a hierarchical file system as a tree. While its TreeModel is implemented using DefaultTreeModel, an alternative FileTreeModel is shown here. As mentioned in How to Use Trees: Creating a Data Model "the TreeModel interface accepts any kind of object as a tree node."
Related
I want to create clutering in my map. When looking at guides and in the Docs, the FeatureCollection Json is always pulled from some external link. But how do I just create it programmatically as I read data from my server? I don't have it all ready in one place and it will always be changing anyway depends on the user.
I've been stuck with this issue before and ended up using some duck tape solution, but it won't work now. Can anyone please shed some light on this please?
You're able to create a FeatureCollection using an existing Feature object or array/list of Feature objects. This could be turned into a method that you could use to generate a new FeatureCollection whenever you receive a new dataset.
Given the information that you've provided, I am going to have to make some assumptions here - I hope that the following code snippet helps guide you in the right direction:
public FeatureCollection getFeatureCollectionFromCoordinateList(List<Coordinate> coords) {
List<Feature> pointsList = new ArrayList<>();
for (Coordinate coord : coords) {
Feature feature = Feature.fromGeometry(Point.fromLngLat(coord.getLongitude(), coord.getLatitude()));
pointsList.add(feature);
}
return FeatureCollection.fromFeatures(pointsList);
}
In the above example, the object I've used to represent data from the server is called Coordinate which I've given a getLatitude() and getLongitude() method to demonstrate using latitudinal/longitudinal information to generate a Mapbox FeatureCollection from a List of Feature objects which are created using the Feature.fromGeometry() method, passing in a Point.fromLngLat().
Please note that this mightn't be the best way to go about what you're trying to achieve here. That said, I hope it illustrates another way in which you can instantiate of FeatureCollection without reading in a JSON data source.
I have an OrderedMap called "firebase" from the immutable-js library which has three leaf nodes:
but then I'd expect to be able to inspect the ordered map at firebase.auth with:
newValue.getIn(['firebase', 'auth'])
But that doesn't work:
Can someone help me understand what I'm doing wrong.
Your auth is an Immutable OrderedMap, but it seems that your firebase is a simple JavaScript object, not an Immutable.js one. Hence why getIn would not work. Thus newValue.get('firebase').auth would suffice.
If you are not using the redux-immutable package then you are probably going to have these (and other) issues due to combineReducers. However, combineReducers created using redux-immutable uses Immutable.js API to iterate the state so check it out.
I have created a new solution for my MvvmCross app that supported Windows Store and I want to support UWP on Windows 10. I have moved over the PCL successfully, but I am having problems getting the basic UWP app working using a sample provided by MS (NavigationMenu) which uses the SplitView and the AppShell pattern they are recommending for the new navigation/command model. I referenced a helpful blog post (http://stephanvs.com/implementing-a-multi-region-presenter-for-windows-10-uwp-and-mvvmcross/), which gave me some guidance on how to integrate mvvmcross into the AppShell, but startup is failing because the AppShell does not have a valid Frame defined. Frame is a read-only property, and I have been unable to see where this is being set up.
I am using the standard AppShell implementation from the NavigationMenu with the following changes as recommended in the blog post:
public sealed partial class AppShell : MvxWindowsPage // was Page
public Frame AppFrame { get { return this.Frame; } } // was this.frame
Except for code after the error, there are no differences in the setup. In looking at the MvxWindowsPage implementation, there doesn't seem to be anything special as it still invokes the Page initialization. Is there something obvious I am missing?
So the link to the blogpost is correct, in other words you'll need to use MultiRegions from MvvmCross to get this working.
But what the blogpost doesn't show is a complete working version...
I've added one on my github here:
https://github.com/Depechie/MvvmCrossUWPSplitView
Some pointers to take away, like I said in the comments.
Your view where the SplitView will be present, needs to have a property to return a valid Frame to look for while injecting new views. This can be returned like this return (Frame)this.WrappedFrame.UnderlyingControl; found in the code here https://github.com/Depechie/MvvmCrossUWPSplitView/blob/master/MvvmCrossUWP.Win/Views/FirstView.xaml.cs#L13
Than all views you want to load up in the SplitView will need to reference to the region you defined in that SplitView, in my case I named it FrameContent as seen here https://github.com/Depechie/MvvmCrossUWPSplitView/blob/master/MvvmCrossUWP.Win/Views/FirstView.xaml#L48
So use that name for the region attribute in all to be loaded views like so [MvxRegion("FrameContent")] example here https://github.com/Depechie/MvvmCrossUWPSplitView/blob/master/MvvmCrossUWP.Win/Views/SecondView.xaml.cs#L7
I see what you're trying to do with the SplitView template that's provided by Microsoft. There is however a mismatch between things managed by MvvmCross and UWP.
By default MvvmCross maps ViewModels to Views based on naming conventions. What you are trying to do is use a view 'AppShell' (which is derived of Windows.UI.Xaml.Controls.Page) that doesn't adhere to the default MvvmCross convention.
The way I choose to implement this SplitView (Hamburger) functionality is by deleting the provided AppShell class entirely. I then created a new view named HomeView (since I have a ViewModel with the name HomeViewModel) and added the SplitView control there as described in the post you mentioned above.
For completeness I've created a Gist with the App.xaml.cs and HomeView.xaml as you requested. You can find them here: https://gist.github.com/Stephanvs/7bb2cdc9dbf15cb7a90f
I'm looking for a way to realize the following use-case:
I have many modules and each one of them has a wire spec that
exposes its components
To assemble an application, I select the modules and use their wire-spec
The wire-spec of the application is the merge of wire-specs of used
modules: (3.1) I start by 'requiring' the wire-spec of each module
as objects. (3.2) Then, I merge the objects. (3.3) And, finally, I
return the result as the object defining the wire-spec of the
application.
Here is a sample of an application context-spec:
define(["jquery", "module1-wire-spec", "module2-wire-spec"], function(jquery, module1WireSpec, module2WireSpec) {
return jquery.extend(true, module1WireSpec, module2WireSpec);
});
I have read several times wire documentation hoping to find a 'native' way to do the above but I failed so far to find one.
A 'native' way would be a factory like the 'wire' factory but instead of creating a child-context for each module, I'm looking to see the components of each module as direct components of the application context.
Spring, for instance, allows importing a context definition into another one and the result is as if the content of the imported context has been inlined with the importing context.
A new feature has been added to cujojs/wire to allow import of contexts.
As of version 0.10.8, the keyword imports accepts:
a string for a single context import,
or an array for a list of contexts import.
Check here for more details.
I've written a JTree with couple of nodes. When I launch the program, I only see the node icons like folder or file and not the names associated with them. I could expand and collapse the nodes. When I debug, I see that the nodes are set with proper data whatever I used while building the model. In this program, i've written wrappers for JTree, TreeModel, DefaultMutableTreeNode. What could be the problem? Any pointers would be of great help.
-Paul
Sorry for not posting more details/code. Anyway, I've found the problem with my code. The problem was that I had overridden the toString() method in the class that I use to set as user object for the tree node, but that was returning null. As the method was returning null, there was nothing displayed. I made it to return the string to be displayed. It is working good now.
Thanks guys..!