If I am limited to say a 1920 x 1080 screen, how do I create media queries for a larger screen size without being able to test it?
You can set any resolution in Chrome. Just click "Toggle device mode" in Inspector and set any resolution.
In Chrome Developer Tools, you can use Device Mode to emulate any resolution, not just mobile breakpoints.
If you are using Google Chrome, you can open the web inspector Ctrl-Shift-I, then toggle Device Mode using Ctrl-Shift-M. It's mainly used for smaller devices, but you should be able to select 'Responsive' in the menu that comes up at the top of the screen, and enter any resolution you wish, along with a zoom level so that you can view it on your screen, albeit scaled.
If you are using Safari, you can do this relatively easily.
If you aren't using Safari, you probably should get it, at least for website testing. As you can see on step 6, Safari has LOTS of VERY helpful dev tools (i.e. disable JS, disable CSS, etc.).
Here is some instructions with pictures!
Go to the Safari menu (in upper left hand corner).
On that menu click Preferences, this should open up a pop-up box.
On the pop-up box, click the Advanced tab.
At the very bottom of that tab you should see a checkbox that says Show Develop menu in menu bar, check that box.
Now load your website in Safari.
When your website has loaded (for this example I'm using SO), click on the Develop dropdown menu.
Click Enter Responsive Design Mode, and that will now show your website in a window smaller than your browser window.
In that window, click on the window looking thing on the far left.
There are little gray bars on all sides of that smaller window, if you drag these you can make the size whatever you want.
As a side note, when you drag the gray bars (as shown in step 9), you should see the width and height resolution (pixels) change (see screenshot below), this is VERY helpful (and I use it all the time), as it will tell you the exact resolution (pixels) when your website breaks. P.S. you can go to ANY screen resolution - big and small - that you want to with this tool, which is really cool! (I've done 2500 x 1500, 100 x 100, etc.)
Hope this helps you!
I installed Handbrake to do some video conversions on my OpenSUSE 13.1 laptop but when I launch the application it opens and the bottom of the Window is off the viewable screen. Not the end of the world as pressing the super key lets me see the full (if a little small) window but a little annoying.
I tried ALT-F8 and selecting the bottom of the window by pressing the down arrow key but while it selects the bottom of the window it will not re-size it.
My screen resolution is 1366x768. I installed dconf-editor and I can find the ghb application but no settings other than a pointer to the ghb.desktop.
Any on topic ideas welcome.
I´m writing a webapp for an iPad with HTML5, JavaScript and jQuery. My users need to take pictures with the build-in camera. For that reason I am using input type="file". This works great in different browsers (Chrome/Safari Mobile) but the problem is that when I add my app to the homescreen and take a photo in lanscape fullscreen mode- iOS brings up the camera from the wrong side. To be clearer iPad in landscape mode camera slides in from the left side(should be from the bottom). It behaves like it was called from portrait mode and the picture has a dark part on the left side. The camera window automatically changes the orientation - I debugged it - twice (0°/-90°). When I finish taking the picture and return to the app it is displayed in portrait mode, even though holding it on landscape mode. And additionally the screen is somehow locked. Thsi behaviour doesen't occure holding the iPad in portrait mode. Anyone an idea how to solve this strange behaviour? I found that question but no answers...
I'm working on putting together a liquid style-sheet and it works wonderful. One thing that I've noticed is that my browser window in Chrome won't resize below 400px it just gets stuck there and in FF as I scale down it it just stops at around 400px and then pops a horizontal scroll bar.
When I open the site on my phone it looks perfect at around 320px, so I know it does scale lower than 400px.
I was curious if anyone knew if this was a browser/desktop thing or if I should be looking at something other than my CSS. I don't have any min-width declarations so i'm not sure what could be causing this.
Again on desktop it scales down to a min-width of about 400px and stops, but when I open it up on my phone it scales to the size of the phone screen which is roughly 320px... curious why at the very least it won't scale down to the 320px on desktop.
-edit-
Also I'm not sure if this matters but Opera allows it to scale down to pretty much nothing... So it works with Opera and not in Chrome or FF... any ideas?
Chrome cannot resize horizontally below 400px (OS X) or 218px (Windows) but I have a really simple solution to the problem:
Dock the web inspector to the right instead of to the bottom
Resize the inspector panel - you can now make the browser area really small (down to 0px)
Update: Chrome now allows you to arrange the inspector windows vertically when docked to the right! This really improves the layout.
The HTML and CSS panels fit really well and you even open a small console panel too.
This has allowed me to completely move from Firefox/Firebug to Chrome.
If you want to go a step further look at the web inspector settings (cog icon, bottom-right), and goto the user agent tab. You can set the screen resolution to whatever you like here and even quickly toggle between portrait and landscape.
UPDATE: Here is another really cool tool I've come across. http://lab.maltewassermann.com/viewport-resizer/
this may be because of the addons you installed on your browser. remove or hide all addon icons from the tool bar and try re size. when there are addons browser only resize the address bar and keeps the addons visible.
Update: 7/14/2013
With the latest chrome version, now you can re-size the address bar and it will hide the addons automatically.
I was stumped as well but ended up with a simple solution. I just created a HTML file with a link to open a new window:
Open!
This new window has nothing but the address bar and Chrome lets me freely resize this down to 111x80.
nayan9's solution works great, and can be put into a bookmark without having to create a html file. In Chrome, create a new bookmark with URL:
javascript:(function(){window.open('ANY_URL', '','width=320,height=480');})();
And give it a name of "Open Small Window" or something similar. This will allow you to easily open windows without size restrictions within chrome. Note that just copying this into your address bar won't work - chrome strips the "javascript:" out.
In case you want to reduce your screen width to emulate different devices (and why else would you want to do this?):
Chrome now has an Emulation section in its inspector, activated by clicking the little phone icon in the top menubar (between the magnifying glass and Elements):
Emulation mode allows you to set the viewport size to all common mobile screen sizes, among other nice features, like emulating touch, geolocation and even accelerometer input:
Adding to what nayan9 and drinkdecaf said, you can just throw document.URL into the call to window.open to see the page you're currently viewing in the 320 window. You might want to add some more to the width if you're expecting a scrollbar.
javascript:(function(){window.open(document.URL, '','width=320,height=480');})();
I am lazy, to make it even easier, let the bookmarklet ask the user for sizes :-D
javascript: (function() {var width = prompt('Enter window width:', '320');var height = prompt('Enter window height:','480');var url = prompt('Enter window URL');if (url.indexOf(':') < 0) {url = 'http://'+url;} window.open(url, '','width='+width+',height='+height);})()
in chrome the icons of your addons in the top right corner cause the problem
-> resize the adress-bar (where you type the urls) to maximum width (drag the bar at the right edge to the right)
or disable the icons
The DevTools in Chrome have moved on substantially from when most of these answers were posted. The best way to address this issue now is to use the emulators that are built into Chrome.
To use the emulators open DevTools (press F12) and then click on the following icon to toggle the Device Toolbar:
This will then allow you to emulate whichever mobile device or viewport size you want to.
I found a quick workaround for this.
Just install the Responsive Web Design Add-on to Chrome, and it will open a separate window without the address bar and tabs, which can be scaled down to 10 px or less.
Link here: https://chrome.google.com/webstore/detail/responsive-web-design-tes/bdpelkpfhjfiacjeobkhlkkgaphbobea/related
I've been experiencing similar issues and just found a good work around. Open up your chrome devtools and in the top left, there's a little screen and ipad icon. Click that and it opens a mobile view of your page. You can set it to predefined devices or a custom resolution. Pretty nifty actually.
Another easy solution is to click Strg+Shift+N to enter Incognito Mode. There you can resize your Browser window as you like.
I like this tool because it lets you switch quickly and also switches between portrait/horizontal easily for mobile sizes. It also allows you to make a personalized bookmark let, so if you design for obscure resolutions frequently, you can save them and use them.
I had to use one of these tools because even with the above answer I couldn't get my window to scale to 320 properly, this tool seems to be a faster solution overall.
http://lab.maltewassermann.com/viewport-resizer/
I'm always running into this issue with pinned tabs. Chrome will not resize below a horizontal width of eight visible pinned tabs if there are any! Just detach the tab that you want to resize to solve this ...
For a web developer, in order to test the responsiveness of their website in mobile or tablet whose size is less than 500px or minimum width then use developer tools to test in small screens.
For testing, go to developer tools and press ctrl+shift+M or click the device icon at the top left of the developer tools screen to toggle device mode. If the device icon is in blue colour, then you can test your website responsiveness by changing the browser window.
This is my first contribution to the Stack Overflow community, and it is my effort to give back to all you wonderful people who have made internet such a powerful tool.
Now to answer:
Safari, has this cool feature.
You need to activate safari developer option in preferences.
Screenshot of setting up preferences in Safari to activate developer menu
Once activated you can access bunch of very powerful developer tools.
One of this tool is Viewport adjustment which can used to test your website responsive layout.
To activate responsive lay out testing, one can use the shortcut Command+Ctrl+R
to activate safari view port adjustment option.
This will give you enough control to test your website on various view port sizes.
Screen shot of how your browser window will look once responsive layout test option is activated.
Link to how to activate developer menu in safari:
https://coolestguidesontheplanet.com/safari-web-developer-tools-show-dock-browser-window/
A lot of smart phones scale the page to fit into their screen size using zooming. Your minimum page width is probably 400px. Without any example code, I think that's all that can be said.
I would like to set browser size (mainly width) larger than the screen resolution in Windows XP. It looks like there is no easy way of dragging the browser window and resizing it. It resizes to maximum width and height of the actual screen, but no larger.
I need to check and test some webpages on large screens, but I have only a small notebook of my own. Is there a way how to accomplish a larger browser window? Preferrably in Chrome, but any browser in Windows will do.
This problem can be solved in two ways: -
1. Universal browser solution
Create a dummy html page
Add an iframe to its body with the width and height attributes set to the desired dimension
Set the iframe's src attribute to the page you want to test
2. Individual browser's developer tools
Chrome
Open the developer tools using Ctrl + Shift + i
Click the second button top left that looks like a mobile phone
Drag the width to the desired width and refresh the page (F5)
Internet Explorer
Press F12
Go to the emulation tab
Change the resolution dropdown to the desired resolution
Reduce the height of the developer tools bar until the horizontal scrollbars appear
Firefox
Open the developer tools using Ctrl + Shift + i
Press the third icon in the icons on the top right of the developer tools called "Responsive Design Mode"
Choose the resolution in the top left dropdown selector on the top left of the webpage viewport.
I am testing another resolution by zoom out - every browser supports ctrl + and ctrl -
This is possible. First 'restore' (i.e. unmaximize) the window. Then you can simply adjust the width and height of the browser by using the edges of that particular window as you like.
This applies to any browser and application windows including google-chrome.
It seems like this doesn't work for every user. There's a tool called uuspy to do this as suggested in here. I haven't try on how to do this. But, since the ui of uuspy looks not that user-friendly here's quick tip.
Open uuspy.
There, in the main window, you'll see a search box. Type the first few letters of the current 'title' of the browser there (like 'test - Google Search'), and then click refresh.
It'll show a list of windows and child-windows of processes containing the searched partial title in the title-bar.
Click on the relevant one (the root/parent is the one most likely.) Then, click GetInfo.
There's two text panes there. On the left pane, there's WS_THICKFRAME. unselect it and then click setStyle.
That will freeze the resizing. I think you'll have to read the original SO answer to know exactly what needs to be done.
simple! "restore" the window to any size, drag the window so that bottom/left corner is off-screen, then resize using top and right sides to make the window ever bigger. if you need it even bigger, just drag the window again so that bottom/left corner is even further off screen.
I managed to resize the Chrome window using ScreenSpace from dandeware.com (no affiliation). There's a free lite version as well as a paid version.
After you install Screenspace, select the Chrome window and press Ctrl-Alt-R. The software then shows a virtual window and lets you resize the Chrome window in any direction beyond the virtual window. Click on the green checkmark and the Chrome window will have the same size on your physical screen.
You can change zoom of the browser or do something like this:
var desiredWidth = 1368;
document.querySelector('html').style.width = desiredWidth+'px';
In Firefox Responsive Design Mode
Menu -> Developer -> Responsive Design Mode (Ctrl-Shift-M)
gives you a drop-down to select the window size.
copy of answer to https://superuser.com/questions/1263519/how-to-create-a-1280x800-screenshot-of-a-chrome-browser-viewport/1263523
Here's another solution.
Under Linux you can freely resize the windows without any hindrance. It also has Mozilla Firefox and Google Chrome, and are almost equal in functionality to the Windows versions more or less. So, my suggestion is try this with a Linux flavor such as Ubuntu or Linux Mint. May be you can try this via the LiveCD as well. That way, you don't have to worry about installing a new OS! I can help with that if you need.
And, I found this handy bookmarklet that resizes the browser to standard screen sizes such as 800x600 etc.
if you have a dual moniter setup and set the resolution higher on one, then you can drag the size of the window on the smaller screen to the size of the larger so it will get bigger than the smaller screen -this is haw i do it with windows 7