I've been looking around the web for a whole day, but didn't found a clue.
My problem is that I want to create Active Directory users via powershell. I've been doing good so far, but I must set in the property dial-in tab, the remote access permission option to "Allow Access", but I don't know how.
Do anyone have a clue or a trick to do so?
Thanks you in advance.
This is the Attribute : msNPAllowDialin
True : Allowed
False : Denied
Not-Defined : Control by policy
Related
I'm Looking for the syntax for Id'ing if Access DB was open by user or programmatically. I have seen it before and can't find it now. It was just a simple one line function that has a boolean output. Anyone know what I'm talking about?
Read into Application.UserControl (https://msdn.microsoft.com/VBA/Access-VBA/articles/application-usercontrol-property-access). It does exactly what you want.
Note that it isn't a ReadOnly property, and I tend to set it to true to make sure Access doesn't close when the program that opened it quit.
I cannot seem to get the Configuration Button to appear in the Top right hand corner to amend Rule contents (I can Deactivate or Change Severity but would like to be able to change contents also).
I have tried this both using the default admin/admin and my own user both of which have the Global Permission 'Administer Quality Profile and Gates' set for User and Group.
This has been tried with both the In-Built Profile (Sonar way) and my own created from a copy of 'Sonar Way'.
We are using Version 4.5.2 but the same issues seem to exist with Version 5.1 which I have also downloaded.
Don't know whether this is something stupid I am doing, a Plug-In required or possibly a Paid Option but any help or information would be gratefully received as all the Documentation and YouTube vids seem to suggest we are configured correctly and should be able to do this.
Regards,
Dave.
There's no link named "Configuration" in version 4.5. I suppose you mix management of "Quality Profiles", which requires the permission "Administer Quality Profiles and Gates" and global management console, named "Settings", which requires the permission "Administer System".
Screenshot: https://www.evernote.com/l/APs76rLwBZJHEaI7a5C7di--y3peIf42BiY
I created new user - 'exampleuser' and new role - 'examplerole' in JasperReports Server version 5.6.
The new user - 'exampleuser' has 2 roles: 'examplerole' and 'ROLE_USER' that is attached to the user by default in the JR Server.
For every folder in jasper I gave the 'examplerole' and 'ROLE_USER' the permissions - Execute only.
According to my understanding, if I will login with the 'exampleuser' user I won't be able to see any folder, of course not be able to delete any file inside that folder.
What actually happens is that I'm able to see all the files inside any folder, add and delete files as I wish and change permissions to the files.
Could not find any information about it - according to the JasperReports Server manual I'm not doing anything wrong or do I?
The 'exampleuser' doesn't have any permissions to the folder e.g. 'NO ACCESS' permission.
And there were no errors in the logs.
Is someone ran into this situation before? Is it fixable or it is some bug of JasperReports Server?
-----------------------------EDIT---------------------------------------
I've found out that this situation happens only in Google chrome browser. If I use IE for example, everything is as it should be.
Anyone? Any idea?
Edit user(exampleuser) and assign only new role(examplerole) which you created for new user remove ROLE_USER and save.
Now right click on the folder on which you want to give permission to new user(exampleuser) and select "Permission" , there you can see all the roles and there access permission.
Change permission No Access to Read only for examplerole and remove the access form other roles i.e. select No Access option.
Now after that you need to check remaining other directories whether they have ROLE_USER access or not , if they have remove permission from ROLE USER i.e set it to No Access.
Good morning,
I create all steps as usually for create an sub-domain:
1. I create an sub-domain using CPanel;
2. I specified from setting on ¨Address URL¨ as usually in OpenCart form :
http://demo1.my-shopping.ro/
So, I don´t see the theme choose instead of those message which can be see if you will type in browser the address of my sub-domain.
What I don´t understand is if the steps is so simple, why don´t work?
I waiting much early is possible your answer and advice or other suggestion which can help me to resolve the error.
Thank you in advance for support and collaboration.
Best regards.
first of all you need to create sub domain i.estore2.yourdomain.com as shown above or you can host it on sub category also i.e www.yourdomain.com/store2/ then goto yourdomain.com/admin and in opencart admin panel goto settings click Insert button fill details as show below then move you clone to those folder e.g store2 and edit config.php as show below
`<?php
// HTTP
define('HTTP_SERVER', 'http://yourdomain.com/store2/');
// HTTPS
define('HTTPS_SERVER', 'http://yourdomain.com/store2/');
?>
I'm trying to open a form from an url. This ms access database will be hosted on a shared folder in an network, and the costumer has asked me if it's possible to open an database form (i'll have to pass an ID).
If this were in web environment i would do this without any problem, but honestly in ms access i have no idea how to do this.
Can someone help me?
Have a look at Register protocol and Registering an Application to a URL Protocol. They have a example registry file on how to register a protocol:
REGEDIT4
[HKEY_CLASSES_ROOT\foo]
#="URL:foo Protocol"
"URL Protocol"=""
[HKEY_CLASSES_ROOT\foo\shell]
[HKEY_CLASSES_ROOT\foo\shell\open]
[HKEY_CLASSES_ROOT\foo\shell\open\command]
#="\"C:\\Program Files\\Application\\program.exe\" \"%1\""
You can change the last line to something like:
#="\"C:\\Program Files\\Office\\access.exe\" \"C:\\path\\to\\your\\db.mdb\" /cmd \"%1\""
If you URL is foo:241245, the following command is called:
"C:\Program Files\Office\access.exe" "C:\path\to\your\db.mdb" /cmd "241245"
In Access, the commandline arguments are returned by the Command function:
In the direct window:
?Command
241245
The database can be opened from a URL like any other file:
file://server/share/path/database.mdb
This won't work if the database has user-level security on it though. I've only ever done that by using a windows shortcut.
If you're not using user-level security and the URL works, you can set the desired form to open automatically on load by going to the Access Options screen and the Current Database tab, then selecting the desired form from the Display Form drop-down list.
Oops - I just noticed that you said you'd need to pass an ID. I don't know if that's possible using a URL.
Open your Access database from the network location (i.e., with a UNC path, not from a drive letter, or locally).
Navigate so you can see the form listed in your database.
Drag the form to your desktop. A shortcut directly to the form will be created there.
I don't think this is a good idea, though. It's a substitute for a user interface in your Access application. Additionally, your description of the problem sounds like you're intending to have multiple people opening the same database file. This is a really bad practice -- best practice is for the database to be split (back end with data tables only on the server, and individual copy of the front end with forms/reports/etc. on each user's workstation), and more than one user should never be opening the same front end at the same time.