In general, if I've got a custom file of type W and want to use custom application/editor X to open/view it how do i set up Hg to call the application X when i want to edit/view the file?
Specific example: I'm using TortoiseHg to track a set of files, that are created by a custom application, an OPC server application called Kepserver. Kepserver creates .OPF files, while Hg can tell when the files have changed, I'd like to use the Kepserver application to view the files from Hg Workbench.
I see a setting that allows me to set an editor. I specified the path to the Kepserver application, but when i click on the files in workbench it tries to do a binary diff, using Kdiff3, How can i specify editors for specific repositories?
The default behavior when double-clicking a file in TortoiseHg workbench is to run a visual diff. To open the file in an editor, you must right-click on the file and select "Edit Local" or one of the similar options.
The editor used when this option is selected is controlled by the
[tortoisehg]
editor = <editor>
setting in your .hgrc or mercurial.ini.
Related
I'm using Windows 10 and installed gitlab-runner using the Gitlab's doc.
After a successful installation and registration, I try to leave the folderI used to install (C:\Gitlab-Runner in my instance) and try to run gitlab-runner. I get the response: 'gitlab-runner' is not recognized as an internal or external command, operable program or batch file.
I am able to run without issue in the C:\Gitlab-Runner folder, but nowhere else.
Based on the documentation and tutorials I looked at, I wouldn't expect this behavior; am I supposed to?
Did you check to ensure that it was added to The windows environment. You will likely need to update the path variable to include the path that you are using to run the command.
On windows, you add to the PATH variable with the following steps (yanked from google search page):
On the Windows taskbar, right-click the Windows icon and select System.
In the Settings window, under Related Settings, click Advanced system settings. ...
On the Advanced tab, click Environment Variables. ...
Click New to create a new environment variable.
Once you've added C:/Gitlab-runner/ to PATH, I believe you should be able to invoke with gitlab-runner.
The only thing I'll add is that, for setting PATH, the last step above is most likely unnecessary, as there will already be a variable named PATH with a list of directories stored in it. Just click EDIT and add your directory to the end of the list. Be sure to add the separator that is used for the others (I believe it's a semicolon on Windows...)
Solved. I need to call C:/Gitlab-runner/gitlab-runner rather than just gitlab-runner in other directories.
Please make sure the name of the exe is correct in the folder C:\GitLab-Runner
In my situation, I have the gilab-runner.exe.exe, there was an extra .exe in the file name though its not showing in the directory.
enter image description here
I am using Git Command Line, Homestead, Windows 10, PhpStorm 2017.3.
I want to open any project in PhpStorm using git bash /command line.
Just pass FULL path to the project root folder as parameter to PhpStorm executable file -- IDE will either open existing project (if .idea subfolder exist) or will create brand new project from those files.
It works the same as if you would use Open from within PhpStorm and point to such folder.
An example:
"C:\Program Files\JetBrains\PhpStorm\bin\phpstorm64.exe" "C:\Projects\MyProject"
phpstorm64.exe is for 64-bit Java
For 32-bit Java you should use phpstorm.exe
You can add path to PhpStorm executable into system's PATH variable so there will be no need to use the full path. But then you have to install new versions into the same folder or update PATH as needed. The you could just use phpstorm64.exe "C:\Projects\MyProject".
You can also create some alias/batch file (similar idea to what Mac/Linux user have -- there IDE creates that for them) so it's easier to use. It's a bit more initial work but easier to keep the path up to date.
You may want to specify another path for your program but if nothing else just use this I guess.
I have an open project in PhpStorm that I manage using SourceTree. I was trying to remove some image files from a commit using SourceTree, but accidentally selected a file that should not be deleted. I haven't changed anything (in either PhpStorm or SourceTree) since deleting the file. I tried to do Ctrl+Z in SourceTree but nothing happened. I then checked in PhpStorm Vcs -> local history, but it didn't show the file. How can I recover this file?
Try to right click on project main folder in phpStorm and select Local history / Show History in context menu (not vcs / local history). The file should be at the list as "Deleting".
This is documented by JetBrains here
TL;DR
I would like to setup PhpUnit in PhpStorm. I press 1. Edit Configurations... and would like to enter this parameter in field 2.
I am using phpunit.xml as configuration file and all want to use a relative path like:
phpunit.xml
or use project root variable like
$PROJECT_ROOT/phpunit.xml
But both options are not working for me.
Based on your screenshot (the place where you want to use it): use full path -- in project settings such path is stored relative to the project root anyway (unless you specify some file which is outside of the project, of course) and the full path then reconstructed when needed (e.g. when shown to you or when used as a parameter during tests execution).
I don't think you'll be able to achieve what you want via the project's Run/Debug configurations. What might help you is the Default configuration file setting in your default project settings, which can be used to define the PHPUnit configuration file to use by default, so you don't need to specify it via the Use alternative configuration file option in your Run/Debug configuration.
To set this, open your Default Settings window, then navigate to Languages & Frameworks -> PHP -> PHPUnit. In the Test Runner section tick the Default configuration file checkbox and specify the location where you keep your configuration file. If this file will always be in the same path relative to your project root, you can use the $PROJECT_DIR$ variable to define the project root. So if your PHPUnit configuration file is always in the root of your project, you might set this to something like $PROJECT_DIR$/phpunit.xml. When you create a new project, its Default configuration file variable will be set to the file offset from your project root, and you won't need to use the Use alternative configuration file option in your Run/Debug configuration.
If you're opening the same project in different locations on the same machine this should work for new projects without any problem, if you want to share this configuration across machines, you might need to try PHPStorm's Exporting and Importing Settings functionality.
I'm not sure if this directly solves your problem, and it's a few months late anyway, but maybe this will be useful for someone else who stumbles across this question... The above instructions were correct for my 8.0.3 installation on Linux.
Here's the problem :
My project on phpStorm use a remote access to the server by FTP.
When I save a modified file, the file is uploaded normally to the serv, but when I create a folder on the serv, i don't see it in phpStorm.
Any idea?
PhpStorm is built around "local project files are the main ones -- deployed are secondary" idea. It's natural to have "automatically upload to remote host" (sync local with remote) functionality to follow such an idea.
At the same time the IDE does not have anything to "automatically sync remote with local" (the reverse: to automatically copy remote stuff back to local). Simply because it contradicts such an idea: local files are the main ones.
Therefore:
The "Synchronize" button that you are referring to does not do what you are expecting it to do. It syncs what the IDE knows about project files on a local file system. In other words: it checks if there were any changes to local files done outside of the IDE. It does not do anything with remote files.
NOTE: In modern 202x.x versions it has been renamed to "Reload All from Disk" to avoid such a confusion).
To manually sync with remote files (any direction) you have these main options:
Use Remote Host side panel (can be accessed via Tools | Deployment | Browse Remote Host if it’s closed/hidden) and download any files or folders manually (drag and drop can also be used, just make sure that you are copying files because by default IDE tries to "move" (copy+delete) instead of just "copy"). It has a "Refresh" button to refresh the remote location.
Use two-way synchronisation (with preview) accessible via right click on desired folder(s)/files and choosing Deployment | Synch with Deployed... where you can sync those files/folders both ways (by default newer stuff will override older regardless of the direction).
The IDE can automatically sync one way (from local to remote): just ensure that automatic deployment is enabled and you have one server (or a group) marked as Default for this project.
Settings (Preferences on macOS) | Build, Execution, Deployment | Deployment | Options | Upload changed files automatically to the default server is the option. Check other options there to better suit your needs.
Please refer to the official help pages for more info on deployment (including a simple video tutorial): https://www.jetbrains.com/help/phpstorm/deploying-applications.html
And the funny thing about it, it is not completly correct. The option underneath is missing.. 'skip external changes' should not be ticked.
In Mac -> PHPStorm -> preferences -> Build, Execution, Deployment -> options
Set the Upload as seen in the picture to always and make sure skip external changes is unticked.
It works for me in PhpStorm 2020.1