How do I get Jekyll to work with Pow?
Thanks to the #mipadi answer, I learned that Pow automatically serves static files in the public directory of your application, so just configure Jekyll to change the directory where Jekyll will write files to from _site (the default) to public. Since public doesn't start with an underscore (_), you also have to add it to the list of files & directories to exclude. The relevant parts of my _config.yaml look like this:
destination: public
exclude: ["CNAME", "Rakefile", "README.md", "public"]
Then, just do the usual:
cd ~/.pow
ln -s /path/to/myjekyllsite
And navigate to http://myjekyllsite.dev/.
Pow public directory trailing slash issue: Going to http://myjekyllsite.dev/projects should automatically redirect to http://myjekyllsite.dev/projects/ but didn't.
Here's an approach that doesn't require overriding any of the normal Jekyll defaults:
Install rack-jekyll:
gem install rack-jekyll
Add config.ru with the following contents:
require "rack/jekyll"
run Rack::Jekyll.new
And now symlink your project directory into ~/.pow as you normally would.
I'm not familiar with Pow, but it looks like you could just symlink the output of your Jekyll-generated site into ~/.pow/public.
Related
I have a bunch of static files (basically favicons, apple-site-icons, etc) that I want to be at the root of _site when it's built. Currently they're just sitting at the root of my main code folder (along with _posts, _scss, _layouts, etc). It builds fine but it would be nice to move them into a subdirectory so the main directory isn't cluttered up (it's an OCD thing).
Is there any folder where I can put these items so they automatically copy to the root of _site when I build? I know I can write a script to do this and trigger it after the build, and there's probably an extension I could lean on, but I'm looking for a solution that just automatically moves them when I run jekyll build for simplicity.
NBD if I can't do it, just curious because I'm kind of a neat freak.
Thanks!
Jekyll allows you to do exactly that using permalinks.
Permalinks are the output path for your pages, posts, or collections. They allow you to structure the directories of your source code different from the directories in your output.
A simple example extracted from the official page is a case where you have /my-pages/about-me.html with the front matter as follows:
---
permalink: /about/
---
This way you specify the output url. In this example, you could access it in local with localhost:4000/about/
The source option. You can specify this in your _config.yml or as a command line option (https://jekyllrb.com/docs/configuration/options/). How you set this has slightly different requirements/implications.
First, move everything that belongs to the Jekyll site into a folder (e.g. "src").
Then set one of these up (assuming you have a Gemfile):
Command line option with root Gemfile:
Keep Gemfile in the root folder
Run bundle install
Run bundle exec jekyll serve --source src
Command line option with nested Gemfile:
Run BUNDLE_GEMFILE=src/Gemfile bundle install
Run BUNDLE_GEMFILE=src/Gemfile bundle exec jekyll serve --source src
Config file option:
Keep Gemfile and _config.yml in the root folder
Add source: src somewhere in your _config.yml
Run bundle install
Run bundle exec jekyll serve
Each solution here might work better with other external services building your site. There are likely other ways to set this up, but this should get you started.
I recently decided to generate a Github Pages website using Hugo. I wanted to keep Hugo input (configuration, themes) in the same directory as the output, for easy management. Unfortunately, Github Pages's CI complains when I try to turn public directory into a symlink into ., as well as when I create a hugo directory and make hugo/public a symlink to ... Are there any other options to keep configs and output in the same directory, bypassing that error?
I solved the problem by putting the following in my config.toml file:
publishDir = "."
As a result, I didn't need the "public" directory pointing to ..
The index.html home page displays fine, however any any link will throw a 404.
The static website has folder with html in it, index link to these html with the correct path, but displays a 404.
When clicking on this link, I got a 404.
however the file is present as you can see here .
I am really banging my head on a simple html pb, which is frustrating.
I ran into this problem myself and finally discovered a simpler solution. The problem is that Jekyll ignores all files that start with _. The simple solution is to add a .nojekyll file to your docs dir.
My docs script looks like this:
"rimraf ./docs && typedoc src/ --out docs --mode modules --module commonjs --target es6 --excludePrivate && touch ./docs/.nojekyll && gh-pages -d docs -t"
touch is an npm module that creates the file and the -t flag on gh-pages is necessary to have that dot file uploaded.
Alright I though I might just answer my own question here.
Github Page doesn't allow several static HTML files.
This is not very clear to be honest on their docs, but the solution is quite simple :
Assuming your local static docs works correctly, just follow these steps :
install jekyll
gem install jekyll bundler
add a file _config.yml
in your docs or on the root of your gh-pages branch with this content:
auto: true
execute jekyll serve
And test if this works ok on the url outputed in your console
add _site in your .gitignore
push and bingo!
If you are like me using typedoc to compile typescript into nice documentation, you will run into trouble.
Because Jekyll automatically exclude from the build any files starting with _, and typedoc generates ONLY that, I wrote a simple yeoman generator that does all the replacement for you.
I have been using Jekyll for my blog and it has been working fine. Now I am trying to add new posts from a computer running Ubuntu 14.04 and Jekyll 2.4.0. The problem is that, only on this computer, it does not generate index.html in _site.
I can't find anything in the documentation that helps, and in any event, I'm using git so I have the same configuration on all of my machines.
So the question is: How does one turn off generation of index.html in Jekyll, and how can it be turned back on?
[Update: I did gem uninstall jekyll followed by gem install jekyll, rebuilt the site, and everything works fine. The original install must not have completed properly.]
To turn generation off you can remove this file. Or to use static index.html file remove markdown section enclosed with double triple --- in header (in this case static index.html will be parsed). Also mention filename it in exclude: section of _config.yml to avoid copying to _site folder.
I'm considering Jekyll for a site I'm putting together that will be a blog with lots of images (and other larg-ish media files). It's easy enough to to make a directory for images and then link to them as needed in the posts. But, as I understand it, when the site is generated, all the image data will be duplicated into the generated _site directory that holds the static files. Each time the site is generated the _site directory is emptied, and repopulated with the static version of the site.
Is there any way to, for example, drop a symlink to the images directory inside the site directory, and then maybe have jekyll ignore it when the static files are generated?
Or is there another way to go about this that makes more sense?
Assuming you are running on an apache web server, you can setup an Alias directive to serve images from a directory outside of the normal docroot. You need access to edit the VirtualHosts config or some other ability to create aliases directives (e.g. via a control panel).
For an example of how this would work, let's say you are storing your jekyll files under a directory called "/web/jekyll". To get your images directory do the following:
Add an "_images" directory along with your basic jekyll tree. Ending up with something like:
_config.yml
_images/
_layouts/
_posts/
_site/
index.md
Update your apache config to add the Alias directive like:
Alias /images /web/jekyll/_images
Reload the apache config and run jekyll to build the site.
Since the image directory name starts with an underscore, jekyll won't push/copy it to the output _site during the build. Apache will happily serve most files from your _site directory as normal, but when it sees something like "http://jekyll/images/test.jpg", instead of looking for the file under "/web/jekyll/_site/_images/test.jpg", it'll serve it from "/web/jekyll/_images/test.jpg".
Incidentally, I like a little more separation of the source content and output content than jekyll defaults to. So, I setup my directory structure as follows:
/web/jekyll/html/
/web/jekyll/images/
/web/jekyll/source/
/web/jekyll/source/_config.yml
/web/jekyll/source/_layouts
/web/jekyll/source/_posts
/web/jekyll/source/index.md
With the following option set in _config.yml
destination: ../html
And the apache alias directive setup with:
Alias /images /web/jekyll/images
Jekyll is run in the "/web/jekyll/source" directory, but output is sent to the "/web/jekyll/html" dir. Similar to the first example, calls to "http://jekyll/images/test.jpg" are served from "/web/jekyll/images/test.jpg". This setup doesn't really make a difference from a site serving perspective. I just like the cleaner separation between the raw source files, the fully baked output files and the images which work via the alias.
Correct, the first part of the jekyll command removes everything in the destination directory. The problem with that is the symlinks must be manually created again. So next, go ahead and create a script that does this each time.
Be sure that:
exclude: [jekyll, css, img] in the _config.yml file
linux: The ";" symbol runs first, second, third.. commands.
script: A file named jekyll with executable permissions containing
jekyll;
ln -s /var/www/css /var/www/_site/css;
ln -s /var/www/img /var/www/_site/img;
Finally run (./jekyll) that program instead of jekyll.
-Dan
Make a project page for the images.
Set up directory structure
/home/git/svnpenn.github.io
/home/git/img
Run Jekyll
# We cant add the symlink until after jekyll is done. We will remove the
# site folder and wait for it to rebuild.
rm -r _site
jekyll --server &
while [ ! -f _site/index.html ]
do
sleep 1
done
ln -s ../images _site/images
Note I was using this because I thought it would help publish time on GitHub
pages. It does not. GitHub can take 1-10 minutes to publish depending on the
server.
I know this has already been answered, but I went a slightly different route. I hosted all of my images in a public directory on Dropbox and use grunt to generate a manifest of the images. It keeps my repository small because the images don't get checked in. I detailed it a while back in a blog post.