I've tried install Apache, PHP, MySQL, and PHPMyAdmin manually and got the error. Then tried XAMPP and still got the error this error with PHPMyAdmin:
The mysql extension is missing. Please check your PHP configuration. <img class="icon" src="./themes/pmahomme/img/b_help.png" width="11" height="11" alt="Documentation" title="Documentation" />
I'm clueless of what the issue is. I've tried solutions on the web and none worked so far. This is a new Windows installation and I installed XAMPP on C:.
Fairly simple fix. Find your PHP.ini file, and in it there will be a list of extensions. Look for the one that says mysql and take the ; off the front of the line.
;extension=php_mysql.dll
;extension=php_mysqli.dll
;extension=php_pdo_mysql.dll
If you don't know where your PHP.ini file resides, you can put this code in a script to find out:
phpinfo()
If after you've removed the semi-colons you STILL get this error. Your extension_dir value in php.ini may be the problem simply point the value to extension_dir = "C:\php\ext" (or wherever you store your php modules), restart your server and you should be fine.
Just add this to your php.ini
extension= php_mysqli.dll
and stop and start apache and MySQL it will work.
I had this issue for the longest time on Xampp 7.4
I had already uncommented the line, however, what helped changing the
extension=php_mysql
to
extension=php_mysql.dll
Related
I want to enable LDAP module on my XAMPP Windows 10, here's the few solutions that I've tried :
Copy dll files to System and System32 and uncomment extension=php_ldap.dll in php.ini, both development and production.
Copy libsasl.dll to xampp/apache/bin
None of these working, when I opened phpinfo() there is no ldap info showing, which means the ldap hasn't been able to installed. I also added PHP in Windows Path with no success, but either my approach is wrong or that wasn't a solution. Any help appreciated.
Make sure the path\to\xampp\php directory has the following files
libeay32.dll
libsasl.dll
ssleay32.dll
Usually, you can find these files in path\to\xampp\sendmail - this library also uses them. But if not, try to search for them inside the xampp directory.
Uncomment or add the ldap extension in the php.ini (path\to\xampp\php\php.ini) file
extension=ldap
Restart the server
Make sure the path\to\xampp\php directory is set in the system environment variable PATH. To know how to do it, see this post.
I just ran into the same issue and the link you provided How to enable LDAP extension in XAMPP environment ended up being the solution for me.
I copied libeay32.dll and ssleay32.dll from C:/Ampps/php to C:/Windows/System32. I made sure neither of these files were in C:/Windows/System. From there I enabled extension=php_ldap.dll in the php.ini file. Ampps has a list you can enable php.ini dll's and if I remember right so does XAMPP. The last step is to just restart Apache and you should be good to go.
I'm using Windows 10 with Ampps instead of XAMPP but have to think they are pretty close.
I am not able to start the MySQL server on my Windows system. When I tried in services.msc to run, I got this error:
Starting it through the XAMPP control panel does not work either:
Can you help me to solve this?
Open windows services (Start->run ->Services.MSC)
Find service with name "Mysql Server" and check path, it should be something like that:
"C:\Program Files (x86)\Parallels\Plesk\Databases\MySQL51\bin\mysqld.exe" "--defaults-file=C:\Program Files (x86)\Parallels\Plesk\Databases\MySQL\Data\my.ini" MySQL
Make sure that Mysql folder and executable file mentioned above exist by this path.
OR
Sometimes the file name of mysqld-nt.exe renamed to mysqld-nt.exe~ so rename it back to its original name and this may solve the problem.
Go to the path: C:Programs Files\MariaDB 10.2\data..
Lookout for my.ini file. Open the file and check the path for "datadir".
If that does not match to your installed directory then update it.
Your problem will be solved for sure.
I faced the same problem and solved it.
Just modify the registry editor value.
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/MySQL/ImagePath
Parse error: syntax error, unexpected T_OBJECT_OPERATOR in D:\Hosting\12807605\html******\cakephp\config\bootstrap.php on line 107
Need PHP 5.4.16 or greater. Please Try This,Its will help you.
Thank You!
http://book.cakephp.org/3.0/en/installation.html#
In XAMPP, intl extension is included but you have to uncomment extension=php_intl.dll in php.ini and restart the server through the XAMPP Control Panel.
In WAMP, the intl extension is “activated” by default but not working. To make it work you have to go to php folder (by default) C:\wamp\bin\php\php{version}, copy all the files that looks like icu*.dll and paste them into the apache bin directory C:\wamp\bin\apache\apache{version}\bin. Then restart all services and it should be OK.
You need to run the code in PHP 5.4+ as shown in the requirements list for the framework.
Recently we have upgraded our mysql from 5.5.x to 5.6.x in an Ubuntu 12.04, also we have changed php5-mysql library with php5-mysqlnd(Which is recommended from MySql).
Since our change in library phpmyadmin stopped working and shows a blank page.
I have followed so many forum and advises from forum contributor but have not had success so far.
I also used ubuntu repository as suggested in this other topic at stackoverflow ppa:nijel which I believe has the modified phpmyadmin package and include the support of php5-mysqlnd, but still no success.
I also have enabled highest verbosity on the php.ini but still nor error or warning is generating in any log, using chrome developer tools it shows "500 Internal Server Error".
I am clueless now, if anyone can help me to determine what I may be missing obvious.
I just ran into a very similar error and I thought I would leave my solution here in case anyone finds this searching for my error. The difference was, that phpMyAdmin showed a blank page after a successful login.
The solution was, removing the "X-Frame-Options: Deny" header.
When setting up the webserver, I didn't remember that phpMyAdmin would rely on iFrames to serve its interface.
Check Mysql & Php error log files located at /var/log/mysql/error.log and /var/log/apache2/error.log respectively
Even after multiple uninstall, purge and reinstall of phpmyadmin I did not get a success.
Finally I used bruit-force approach and from another Linux server where phpmyadmin was running properly I copied all i.e. /usr/share/phpmyadmin, /etc/phpmyadmin and /var/lib/phpmyadmin folders and over write them in the problematic server.
Every thing works perfectly now.
Thanks for help Vibhas... I just thuoght to post just for someone's help.
In case someone (like I was) is using phpmyadmin via xampp on windows and has skype turned on - try turning skype off (or configure xampp to use another port).
I was facing a similar issue with phpmyadmin (phpmyadmin was returning a blank page). It was alright once I reinstalled phpmyadmin using:
apt-get install --reinstall phpmyadmin
If you are not root:
sudo apt-get install --reinstall phpmyadmin
When i changed this inside the config.inc.php:
$cfg['UploadDir'] = '/tmp';
$cfg['SaveDir'] = '/tmp';
to:
$cfg['UploadDir'] = '';
$cfg['SaveDir'] = '';
and reloaded the page then it worked directly!
This is a long shot, but it happened to me when I realised after a cPanel password reset I did not check the "Synchronize MySQL password" option.
This used to be defaulted as checked in previous cPanel versions.
To fix all I did was reset my cPanel password again and selected the "Synchronize MySQL password" checkbox and PhpMyAdmin was back.
Hope this helps others, and if its causing a big issue cPanel should select this option by default again.
I had a similar experience after installing mysql 5.5.60 and phpmyadmin 4.2.12 and what did the trick for me was changing folder ownership for /var/lib/php/session which was the solution in another case for getting php-scripts tu run in general. In my case user www-data is trying to execute related scripts, so I set folder permissions accordingly
chown -R www-data:www-data /var/lib/php5/
and the page appeared as expected.
A web search for [phpmyadmin blank page] shows many people are having this problem and there are almost as many different solutions proposed. So let me add one more after spending a day and finally having success:
When the blank page was displaying, I opened Developer Tools (Command-Option-i on Mac in Chrome or Brave). I immediately observed multiple instances of failing to load .js files from phpmyadmin/js/dist. Checking that directory I found that it was indeed empty.
I then went to https://www.phpmyadmin.net/ and downloaded the zip file into a different location. When I unzipped it, I found js/dist did in fact contain many .js files. I copied all of these files to my webserver's phpmyadmin/js/dist directory. And the problem was solved! I now have a working page.
I hope that helps some of you.
Perhaps I should add that I installed phpmyadmin using the Composer install method (% composer create-project phpmyadmin/phpmyadmin). I did it a second time in an offline directory and again the js/dist directory was empty. I don't know if that means I did something wrong or if that install method is broken.
I followed this tutorial to the very end, then found out it didn't work right. I think I have everything installed but when I type
mysql -uroot
I only get
-bash: mysql: command not found
Note: I did not skip the "Setting the Path" step. Upon running this command for the first time:
mate ~/.bash_login
This brought up an empty file. So I added this line:
export PATH="/usr/local/bin:/usr/local/sbin:/usr/local/mysql/bin:$PATH"
I saved the file, closed TextMate, executed the following command:
. ~/.bash_login
...and continued with the tutorial. Based on your suggestions, I thought maybe the file didn't actually get saved. So I ran the following command to bring up the file again:
mate ~/.bash_login
...yet the contents of the file were as they should be.
Any suggestions?
You probably don't have the mysql binaries in your path.
The link you posted has a section on setting the path, titled "Setting the Path Do not skip this step! Most everything else will fail if you do."
EDIT: As debugging steps, try:
First launching a new terminal window. Does it run now?
Typing "echo $PATH" at the prompt. Does the path show up correctly as you've typed it in bash_profile?
Running it the long way: /usr/local/mysql/bin/mysql -u root
Does the application run?
Did you follow the step that says
Setting the Path
Do not skip this step! Most everything
else will fail if you do.
Did you close your terminal window and re-open it afterwards?
Update:
What does "which mysql" say? Does "ls /usr/local/mysql/bin" say?
Two things:
Try editing ~/.profile (rather than ~/.bash_profile or ~/.bash_login).
You may find it easier to use the native Mac style .dmg installer directly from Sun.
One nice thing about the dmg installer is that it automagically sets up symlinks to /usr/local/mysql (which means less - or no - fiddling with your $PATH).
Another option would be to use MAMP.
It has Apache, PHP and MySQL packaged with no further setup necessary.
MySQL is usually put in /usr/local/mysql/bin/
You need to add this to your PATH, you can do this by adding the follwoing lines to your .bash_profile
PATH=$PATH:/usr/local/mysql/bin/
export PATH
The .bash_profile file is located in the root of your username directory.
Make sure you restart your Terminal for the setting to take affect.
And if you're not a command-line person, I highly recommend you also install the MySQL Preference Pane to start/stop the server and install Sequel Pro to create databases and run queries.
ftp://ftp.mysql.com/pub/mysql/download/gui-tools/MySQL.prefPane-leopardfix.zip
http://www.sequelpro.com/