My Jenkins server has stopped being able to build a maven project hosted at bitbucket.org. The build works locally but Jenkins reports this error:
[workspace] $ hg incoming --quiet --bundle hg.bundle --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default
abort: no suitable response from remote hg!
ERROR: Failed to determine incoming changes
[workspace] $ hg log --rev . --template {node}
Any ideas what's going on?
[edit]
So, I ran hg paths and got a response that the tomcat user was untrusted:
Not trusting file /usr/local/tomcat/.jenkins/jobs/Test/workspace/.hg/hgrc from untrusted user tomcat, group tomcat
After running hg incoming as the tomcat user
cd /usr/local/tomcat/.jenkins/jobs/Test/workspace
sudo -u tomcat hg incoming
I got an error saying the permissions on my ssh key were too open:
remote: ###########################################################
remote: # WARNING: UNPROTECTED PRIVATE KEY FILE! #
remote: ###########################################################
remote: Permissions 0620 for '/usr/local/tomcat/.ssh/id_rsa' are too open.
remote: It is recommended that your private key files are NOT accessible by others.
remote: This private key will be ignored.
remote: bad permissions: ignore key: /usr/local/tomcat/.ssh/id_rsa
remote: Permission denied (publickey).
abort: no suitable response from remote hg!
and thanks to this SO question
I set the permissions and now Jenkins can successfully build.
Since your hg incoming is based on whatever your 'default' path is in the repository's hgrc (use hg paths to see them, or open the file), maybe you should make sure the address of the remote repository is still correct and that the project is still accessible.
Related
I'm trying to pull code with gitlab-runner with a shell executor.
$ git pull origin master
error: cannot open .git/FETCH_HEAD: Permission denied
ERROR: Job failed: exit status 1
git status seems to work fine but when I try git fetch
$ git fetch
error: cannot open .git/FETCH_HEAD: Permission denied
ERROR: Job failed: exit status 1
This could be because you did not add a deploy key for your gitlab-runner user in your gitlab project, so the runner user does not have access to your gitlab repository.
You should follow theses steps to create the keypair for gitlab-runner user (the shell executor user) https://docs.gitlab.com/ee/ci/ssh_keys/#ssh-keys-when-using-the-shell-executor
Then copy the created public key in /home/gitlab-runner/.ssh/id_rsa.pub
And add it to your gitlab project's deploy key :
Go to you gitlab project
Settings => Repository
Deploy keys
Add a title, past the public key and click "Add key"
Trigger you CI again and the shell executor runner should be able to pull the repository.
I just solved this problem by running this command
sudo chown -R $(whoami) .git/ in my project directory.
You can change $(whoami) to the username of your server. For example sudo chown -R gitlab-runner .git/
Changing the permissions helped!
sudo chown -R .git/
I read the documentation about Action Hook Scripts for OpenShift and created a pre_build action hook with the following commands on my OpenShift gear:
rhc ssh jbosswildfly
cd $OPENSHIFT_REPO_DIR/.openshift/action_hooks
touch pre_build
chmod a+x pre_build
Afterwards I created the pre_build file in the Git repository of my OpenShift application and pushed it to the repo. My deployments to OpenShift are performed by Travis CI and I got the following response:
remote: NOTE: The .openshift/action_hooks/pre_build hook is not executable, to make it executable:
remote: On Windows run: git update-index --chmod=+x .openshift/action_hooks/pre_build
remote: On Linux/OSX run: chmod +x .openshift/action_hooks/pre_build
So I executed git update-index --chmod=+x .openshift/action_hooks/pre_build (because I am running on Windows) and pushed that pre_build file again to my remote Git repository.
Now I get the following message:
remote: No such file or directory - /var/lib/openshift/54e8f8984382ecc9a1000047/app-root/runtime/repo/.openshift/action_hooks/pre_build
Why does it tell me now that it cannot find the pre_build file? If I login (via SSH) to my OpenShift gear, then it's there:
This is my pre_build file:
#!/bin/bash
echo Hello World
I create a local repo with
local-host $ hg init ~/test/
and then in the remote host i do a clone
remote-host $ hg clone ssh://user#local-host/test
without any issues.
When im trying to check if there are outgoing changes in the remote repo im getting this error
remote-host $ cd test
remote-host $ hg --verbose out
comparing with ssh://user#local-host/test
running ssh user#local-host 'hg -R test serve --stdio'
searching for changes
no changes found
remote: abort: no repository found in '/home/user' (.hg not found)!
remote: abort: no repository found in '/home/user' (.hg not found)!
If i commit any change in the remote/local repository and push it im getting the error but the change gets pushed.
Both hosts have the same mercurial version.
Any ideas ?
You need to let it know which repository - easiest is:
remote-host $ cd ~/test/
remote-host $ hg --verbose out
I'm trying to install mercurial-server. After adding my keys to keys/root and refreshing auth, I tried to clone hgadmin-repo but I get the following error:
$ hg clone ssh://hg#<domain>/hgadmin
remote: mercurial-server: no such repository hgadmin
abort: no suitable response from remote hg!
Anyone know what's the problem?
I had this same problem and for me it was a problem with the installation of the hgadmin repository. When I installed the package, I got errors from python saying the mercurial package wasn't installed. I assume that happened when mercurial-server tried to initialize the hgadmin repository. So when I went to checkout the hgadmin respistory, there was no .hg directory:
root#myshost:/var/lib/mercurial-server/repos# cd hgadmin/
root#myshost:/var/lib/mercurial-server/repos/hgadmin# ls -a
. ..
In order to resolve this, I did:
easy_install mercurial
sudo apt-get purge mercurial-server
sudo rm -rf /var/lib/mercurial-server
sudo apt-get install mercurial-server
And then continued on with the directions here:
http://kurtgrandis.com/blog/2010/03/20/gitosis-for-mercurial/
Thanks a lot Randy for exposing the exact issue here.
I struggled with the same problem, and found an alternative approach to solving it (without the need to purge and re-install).
You can initialize the hgadmin repo manually and install the hooks, achieving the same effect as a normal installation. You need to to it as 'hg' user though.
Procedure
The commands worked for my environment (Ubuntu 10.04.4 / Hg 1.4.3)
First initialise a mercurial repository in /var/lib/mercurial-server/repos/hgadmin :
$ sudo su hg
$ cd ~/repos/hgadmin/
$ hg init
Then the only difference I found with a normally initialized hgadmin repo (that I deployed in a VM for comparison) were the hooks in .hg/hgrc file. So open the file :
$ vim .hg/hgrc
and paste this exact content :
# WARNING: when these hooks run they will entirely destroy and rewrite
# ~/.ssh/authorized_keys
[extensions]
hgext.purge =
[hooks]
changegroup.aaaab_update = hg update -C default > /dev/null
changegroup.aaaac_purge = hg purge --all > /dev/null
changegroup.refreshauth = python:mercurialserver.refreshauth.hook
Are you sure your clone command syntax is correct? I see at least two errors in it:
You must put the repo you're cloning (not just the destination)
Just as for push, you must use two slashes before hgadmin:
Example FAILING (missing the source repo and using only one '/' before 'home')
$ hg clone ssh://John#127.0.0.1/home/John/delme
Example FAILING (missing the source repo)
$ hg clone . ssh://John#127.0.0.1/home/John/delme
Example SUCCEEDING:
$ hg clone . ssh://John#127.0.0.1//home/John/delme
I've installed the copssh on a windows 2008 server and then I tried to clone a reposity on the server through ssh. But no matter how hard I tried I couldn't fix this error i got. here is the log:
C:\Users\Admin>hg clone ssh://ehsan#rafsanjani.ir
The authenticity of host 'rafsanjani.ir (96.31.90.174)' can't be established.
RSA key fingerprint is 41:a8:41:21:61:1a:67:2c:e8:44:99:6c:63:e7:06:73.
Are you sure you want to continue connecting (yes/no)? yes
ehsan#rafsanjani.ir's password:
remote: Could not create directory '/home/Administrator/.ssh'.
remote: Failed to add the host to the list of known hosts (/home/Administrator/.ssh/known_hosts).
remote: /bin/bash: Permission denied
abort: no suitable response from remote hg!
I tried to login with administrator but i get the same error message. Also i changed the permission of the folder located in C:\Program Files (x86)\ICW\home\administrator so that ehsan has the full access to this folder.
also when I connect to the server with putty and use this command:
cd /home/administrator/.ssh
echo test>test
file test will create! so it seems that I have the permission to this folder!
this is log when i try to clone with administrator account:
C:\Users\Admin>hg clone ssh://administrator#rafsanjani.ir
The authenticity of host 'rafsanjani.ir (96.31.90.174)' can't be established.
RSA key fingerprint is 41:a8:41:21:61:1a:67:2c:e8:44:99:6c:63:e7:06:73.
Are you sure you want to continue connecting (yes/no)? yes
administrator#rafsanjani.ir's password:
remote: Could not create directory '/home/Administrator/.ssh'.
remote: Failed to add the host to the list of known hosts (/home/Administrator/.ssh/known_hosts).
remote: bash: hg: command not found
abort: no suitable response from remote hg!
The latest versions of copssh/cwrsync use cygwin 1.7 and require a HOME environment variable. So just add a HOME=%HOMEDRIVE%%HOMEPATH% variable and it should work right away. It did for me :)